This bug should be closed since vyos has moved to use Kea and no longer uses wide-dhcpv6

@Viacheslav AFAIK this request has nothing to do with https://vyos.dev/T3771

This made it possible to commit the change
Additionally I set a pbr rule like this:

vyos@vyos# show policy route6
 route6 pbr6 {
     interface bond0.1001
     interface bond0.1002
     interface bond0.1003
     rule 10 {
         destination {
             address 64:ff9b::/96
         }
         set {
             mark 1064
         }
     }
 }

This should only mark traffic going to the nat64 prefix.
however as far as I can see all traffic is still going through/to jool and the "match mark" is ignored.
Where would I be able to verify if it has been set in the backend configs?

@n.fort I like the interface log sub command, gives us a nice way to take on additional logging things later, but for now log link-status seems good to me.

The script exists, under the same name, iff configured:
https://github.com/vyos/vyos-1x/blob/current/python/vyos/config_mgmt.py#L52-L53
https://github.com/vyos/vyos-1x/blob/current/src/conf_mode/system_config-management.py#L52-L64

Try to delete whole nat64 config and re-configure again (not change)
Also I do not see the translation address.
The comment says that changing an instance fails https://github.com/vyos/vyos-1x/blob/c78c5bd7e65b19e0e50ef6944dc74fb33660ff71/src/conf_mode/nat64.py#L71-L74

Can you please include the VyOS config?

Just upgrade from 1.3 LTS to 1.5-rolling-202408300023 on XCP-ng 8.2 with latest patches.
The sg offload setting seems fixed the drop packet issue.

set interfaces ethernet eth0 offload sg
set interfaces ethernet eth1 offload sg
...

@pratik.g can you please retest with 1.4.0 or a more recent 1.5-rolling release?

https://vyos.io currently works from Sweden when I tested it at about 2024-08-31 11:30 local time.

Hello everyone,

PR: https://github.com/vyos/vyos-1x/pull/4024

Showing all logs for interface might print more information than it's needed. Maybe a different approach:

PR for docuemntation: https://github.com/vyos/vyos-documentation/pull/1531

Have you tried running the lcdproc client just for load average? It is just text. Maybe the more complex displays involving histograms, etc. are not working quite right.

In T6685#198650, @Viacheslav wrote:

This request is not clear
Can you share more information? Is it server or client? Provide links where it is implemented for Linux/Debian
Which configuration do you have and which config are you expecting?

This request is not clear
Can you share more information? Is it server or client? Provide links where it is implemented for Linux/Debian
Which configuration do you have and which config are you expecting?

Can't reassign it to me, I will have time next weeks.
Would appreciate minimal mod permissions, so I can close my old work.
Contact me for details if needed, thx!)

Send your question to the forum

https://github.com/vyos/vyos-1x/pull/4020
https://github.com/vyos/vyos-build/pull/763

PR: https://github.com/vyos/vyos-1x/pull/4018