vyos@r14# run show conf com | match ipoe
set service ipoe-server authentication mode 'noauth'
set service ipoe-server interface eth1 client-subnet '100.64.24.0/24'
set service ipoe-server interface eth1 network 'vlan'
set service ipoe-server interface eth1 vlan '2000-3000'
[edit]
vyos@r14#

vyos@r14# cat /run/accel-pppd/ipoe.conf  | grep "\[ipoe" -A 7
[ipoe]
verbose=1
interface=re:eth1\.\d+,shared=0,mode=L2,ifcfg=1,range=100.64.24.0/24,start=dhcpv4,ipv6=1
noauth=1
proxy-arp=1

<0-4294967295>       DHCP lease time in seconds

vyos@r1# run show conf com | match open
set vpn openconnect authentication mode 'radius'
set vpn openconnect authentication radius server 192.168.122.14 key 'vyos-secret'
set vpn openconnect listen-ports tcp '4433'
set vpn openconnect listen-ports udp '4433'
set vpn openconnect network-settings client-ip-settings subnet '100.64.12.0/24'
set vpn openconnect ssl ca-cert-file '/config/auth/ca.crt'
set vpn openconnect ssl cert-file '/config/auth/server.crt'
set vpn openconnect ssl key-file '/config/auth/server.key'
[edit]
vyos@r1# 
[edit]
vyos@r1# run show version all | match ocser
ii  ocserv                               1.1.6-3                        amd64        OpenConnect VPN server compatible with Cisco AnyConnect VPN
[edit]
vyos@r1# 
[edit]
vyos@r1# run show openconnect-server sessions 
interface    username    ip             remote IP        RX      TX         state      uptime
-----------  ----------  -------------  ---------------  ------  ---------  ---------  --------
sslvpn0      foo         100.64.12.225  192.168.122.205  1.3 KB  152 bytes  connected  55s
[edit]
vyos@r1#

set high-availability vrrp global-parameters notification mail 'destination@bar.local'
set high-availability vrrp global-parameters notification send-faults
set high-availability vrrp global-parameters notification smtp-server address '127.0.0.1'
set high-availability vrrp global-parameters notification smtp-server connection-timeout '30'
set high-availability vrrp global-parameters notification smtp-server port '25'
set high-availability vrrp global-parameters notification source-mail 'foo@bar.local'
set high-availability vrrp global-parameters router-id 'MYROUTER'

vyos@r14# set qos policy shaper test default bandwidth
Possible completions:
   <number>             Bits per second
   <number>bit          Bits per second
   <number>kbit         Kilobits per second
   <number>mbit         Megabits per second
   <number>gbit         Gigabits per second
   <number>tbit         Terabits per second
   <number>

starts 5 2023/03/03 02:09:13;
ends never;

lease 192.0.2.10 {
  starts 5 2023/03/03 08:07:15;
  ends 6 2023/03/04 08:07:15;
...

File "/usr/libexec/vyos/op_mode/dhcp.py", line 286, in <module>
  res = vyos.opmode.run(sys.modules[__name__])
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/opmode.py", line 227, in run
  res = func(**args)
        ^^^^^^^^^^^^
File "/usr/libexec/vyos/op_mode/dhcp.py", line 246, in _wrapper
  return func(*args, **kwargs)
         ^^^^^^^^^^^^^^^^^^^^^
File "/usr/libexec/vyos/op_mode/dhcp.py", line 277, in show_server_leases
  lease_data = _get_raw_server_leases(family=family, pool=pool, sorted=sorted, state=state)
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/libexec/vyos/op_mode/dhcp.py", line 85, in _get_raw_server_leases
  data_lease['end'] = lease.end.timestamp()
                      ^^^^^^^^^^^^^^^^^^^

set protocols bfd peer 192.0.2.5 multihop
set protocols bfd peer 192.0.2.5 source address '192.0.2.1'
set protocols bfd peer 192.0.2.6 multihop
set protocols bfd peer 192.0.2.6 source address '192.0.2.1'
set protocols bfd profile BBR interval multiplier '3'
set protocols bfd profile BBR interval receive '350'
set protocols bfd profile BBR interval transmit '350'

r14(config)# ip route 192.0.2.1/32 203.0.113.1 
  <cr>         
  (1-255)      Distance value for this route
  INTERFACE    IP gateway interface name
     dum0 eth0 eth1 eth2 lo veth0 veth1 wg0 
  Null0        Null interface
  color        SR-TE color
  label        Specify label(s) for this route
  nexthop-vrf  Specify the VRF
  table        Table to configure
  tag          Set tag for this route
  vrf          Specify the VRF