- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
All Stories
Jul 17 2026
I ran into this with a Vyos router (VyOS 2026.06.20-0050-rolling) with an interface against a Juniper ex2300 that literally takes 5+ minutes to boot going from power on to interfaces up. Perhaps a 10 minute timeout might be better? Or is there some necessary reason for there to be a timeout at all?
First PR improving the test fixture under load https://github.com/vyos/vyos-build/pull/1247
I am facing the same issue, are there any plans to expand the DHCP configuration? I see there is a vendor specific option for Ubiquiti. Option 150 is primarily used by Cisco phones. Can it be added as a vendor specific option?
Jul 16 2026
Closing this as the real error is T9098 SBOM should work on generated squashfs rather then unpacked rootfs
@tjjh89017 yes - we removed --allow-downgrades during the 1.4 development cycle which was hard. There is no plan to reintroduce it. Infact your patch is a better solution and we will adjust/merge this. Also once we run trixie our plan is to ditch this workaround again.
@bradkollmyer Hi! For the documentation, you can add PRs without a phorge task. Thanks,
Regarding (1) above: form-POST requests are preprocessed by overriding the route handler before delivery to the endpoint, hence managed by background operations as any JSON formatted request. Regarding (2), thanks for the offer to open a separate task; that would be helpful.
For clarification.
I have created a lab
Underlay: OSPF. The main function is to distribute Loopback IPs.
Overlay:
Control Plane: MP-iBGP. The main function is to distribute EVPN routes.
Data Plane: VXLAN
RR is a router reflector.
VTEP-1A and VTEP-1B contain the same ES via interface eth1
HOST-1 and HOST-2 are in the same network. 192.168.100.10/24 and 192.168.100.20/24 respectivly.
VTEP-1B is a DF router of these ES
--allow-downgrades may lead some other unexpected behavior in the future with other changes.
VyOS rebuilds OpenSSL with other option differs to Debian one, I think that it makes sense to append version string to determine debian ver or vyos ver.
And once upgrade to trixie, we could remove openssl build and install openssl with openssl-provider-fips.
This got merged in btw
This got merged in btw
Jul 15 2026
The issue is related to:
The version we use was proven not to actually have this issue.
Pull requests:
Jul 14 2026
There will likely be at least two modules - for global parameters and tunnel
We hit a related but possibly distinct failure on VyOS 1.5 Circinus rolling (2026-07-06) and would like to confirm the scope of the background-operations fix (https://github.com/vyos/vyos-1x/pull/4953):
Jul 13 2026
This is something very interesting and useful to me as well - unfortunately I can’t change it to feature request though- perhaps close it and re-enter if it’s easy enough to copy/paste the formatting (it’s markdown I assume?)
Jul 11 2026
Jul 10 2026
Jul 9 2026
Hi,
Can someone take over this?
