Went with telegraf support instead
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed All Stories
All Stories
All Stories
Oct 17 2021
Oct 17 2021
syncer edited projects for T3410: Unsafe processing of special characters in CLI autocomplete, added: VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0-epa3); removed VyOS 1.2 Crux, VyOS 1.3 Equuleus.
syncer edited projects for T3854: Missing op-mode commands for conntrack-sync, added: VyOS 1.3 Equuleus (1.3.0-epa3); removed VyOS 1.3 Equuleus.
syncer edited projects for T3610: DHCP-Server creation for not primary IP address fails, added: VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0-epa2); removed VyOS 1.3 Equuleus, VyOS 1.2 Crux.
syncer edited projects for T3892: BGP Route Reflects to all neighbors when one neighbor has route-reflect-client, added: VyOS 1.3 Equuleus (1.3.0-epa3), VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer changed the status of T3892: BGP Route Reflects to all neighbors when one neighbor has route-reflect-client from Needs testing to In progress.
syncer removed a project from T3895: VYOS firewall rules do not adhere to time schedule unless placed in UTC mode.: VyOS 1.3 Equuleus.
syncer removed projects from T3896: Extend ocserv support to allow for per-group configs: VyOS 1.3 Equuleus, VyOS 1.2 Crux.
syncer edited projects for T3898: [RADIUS] - Reverse DNS Lookup Failing , added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T3001: Disable spectre mitigation patches from CLI, added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T2665: vyos.xml.defaults for tag nodes, added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T858: Full UEFI support, added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T861: add secure boot support, added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T418: Add html entities encoding for options field, added: VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T2117: Update Cloud-init version and actualize our changes to it, added: VyOS 1.3 Equuleus (1.3.0-epa3); removed VyOS 1.3 Equuleus.
syncer moved T697: Clean up and sanitize package dependencies from Open to Finished on the VyOS 1.4 Sagitta board.
dmbaturin edited projects for T2116: Processing configuration via Cloud-init User-Data, added: VyOS 1.3 Equuleus (1.3.0-epa3); removed VyOS 1.3 Equuleus.
dmbaturin edited projects for T1262: dhcp requested WAN ip address doesn't get search parameter in /etc/resolv.conf in 1.2.0-rolling+201902210337, added: VyOS 1.3 Equuleus (1.3.0-epa3); removed VyOS 1.3 Equuleus.
Oct 17 2021, 12:50 PM · VyOS 1.3 Equuleus (1.3.0), Restricted Project, VyOS 1.2 Crux (VyOS 1.2.9), test
syncer moved T2764: Increase maximum number of NAT rules from Open to Finished on the VyOS 1.4 Sagitta board.
syncer moved T2764: Increase maximum number of NAT rules from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
syncer edited projects for T2764: Increase maximum number of NAT rules, added: VyOS 1.3 Equuleus (1.3.0-epa1), VyOS 1.4 Sagitta; removed VyOS 1.3 Equuleus.
syncer edited projects for T2800: Pseudo-Ethernet: source-interface must not be member of a bridge, added: VyOS 1.3 Equuleus (1.3.0-epa1); removed VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus.
syncer changed the status of T3254: Dynamic DNS status shows incorrect last update time from Unknown Status to Resolved.
syncer moved T3254: Dynamic DNS status shows incorrect last update time from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
syncer edited projects for T3254: Dynamic DNS status shows incorrect last update time, added: VyOS 1.3 Equuleus (1.3.0-epa1); removed VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus.
syncer edited projects for T2100: BGP route adverisement wih checks rib, added: VyOS 1.3 Equuleus (1.3.0-epa1); removed VyOS 1.3 Equuleus.
syncer closed T1663: T1656 equuleus: buster: arm64/aarch64: ipaddrcheck does not complete testing, a subtask of T476: Update the base system to Debian 10 (Buster), as Resolved.
syncer changed the status of T1243: BGP local-as accept wrong values from Unknown Status to Resolved.
syncer moved T1243: BGP local-as accept wrong values from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
syncer edited projects for T1243: BGP local-as accept wrong values, added: VyOS 1.3 Equuleus (1.3.0-epa1); removed test, VyOS 1.3 Equuleus.
syncer moved T770: Bonded interfaces get updated with incorrect hw-id in config. from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
syncer changed the status of T1440: Creating two DHCPv6 shared-network-names with the same subnet is allowed, causes dhcpd to fail to start. from Unknown Status to Resolved.
Unknown Object (User) added a comment to T3910: Hairpin NAT Not Functioning Correctly.
WAN interface is eth2. It set to DHCP
LAN interface is eth3. It set to static address
syncer edited projects for T3381: Change GRE tunnel failed, added: VyOS 1.3 Equuleus (1.3.0-epa1); removed VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus.
syncer closed T3045: Changes to Conntrack-Sync don't apply correctly (Mutlicast->UDP) as Unknown Status.
syncer edited projects for T3045: Changes to Conntrack-Sync don't apply correctly (Mutlicast->UDP), added: VyOS 1.3 Equuleus (1.3.0-epa1); removed VyOS 1.3 Equuleus.
syncer reassigned T3396: syslog can't be configured with an ipv6 literal destination in 1.2.x from syncer to Viacheslav.
@Viacheslav we need to port this to 1.2 too
syncer triaged T3396: syslog can't be configured with an ipv6 literal destination in 1.2.x as Normal priority.
syncer changed the status of T3396: syslog can't be configured with an ipv6 literal destination in 1.2.x from Resolved to Unknown Status.
syncer moved T3219: Typo in openvpn server client config for IPv6 iroute from In Progress to Finished on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
dmbaturin changed Issue type from unspecified to bug on T3219: Typo in openvpn server client config for IPv6 iroute.
syncer edited projects for T3906: [Traffic Control] Invalid Port Configuration Still Commits, added: VyOS 1.4 Sagitta, Known issue; removed VyOS 1.3 Equuleus (1.3.0-epa1).
syncer moved T3219: Typo in openvpn server client config for IPv6 iroute from Need Triage to In Progress on the VyOS 1.3 Equuleus (1.3.0-epa1) board.
syncer moved T3396: syslog can't be configured with an ipv6 literal destination in 1.2.x from Finished to Backlog on the VyOS 1.2 Crux (VyOS 1.2.9) board.
syncer closed T3396: syslog can't be configured with an ipv6 literal destination in 1.2.x as Resolved.
What is on the eth3 interface?
c-po changed the status of T3911: Expired LetsEncrypt CA leads to unbuildable images from Open to In progress.
Considered while implementing T3642 to have a general LE availability.
Unknown Object (User) added a comment to T3910: Hairpin NAT Not Functioning Correctly.
Tested on VyOS 1.3.0-epa1
Oct 16 2021
Oct 16 2021
c-po moved T3724: Allow setting host-name in l2tp section of accel-ppp from Finished to Backport Candidates on the VyOS 1.4 Sagitta board.
c-po moved T3724: Allow setting host-name in l2tp section of accel-ppp from Open to Finished on the VyOS 1.4 Sagitta board.
c-po committed rVYOSONEX3d00140453b3: l2tp: T3724: allow setting accel-ppp l2tp host-name (authored by maznu).
c-po moved T3891: X550-T2/Possibly other X550/X540 cards no link on VyOS from Open to Backlog on the VyOS 1.4 Sagitta board.
c-po moved T3879: GPG key verification fails when upgrading from a 1.3 beta version from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3879: GPG key verification fails when upgrading from a 1.3 beta version from Backlog to Finished on the VyOS 1.3 Equuleus (1.3.0-epa2) board.
c-po added a project to T3879: GPG key verification fails when upgrading from a 1.3 beta version: VyOS 1.4 Sagitta.
Unknown Object (User) added a comment to T2787: OSPF auto-cost reference-bandwidth bandwidth command support.
Tested in VyOS 1.2.8, VyOS 1.3.0-epa1, VyOS 1.4-rolling-202109190558
RyVolodya added a comment to T3771: DHCPv6 server prefix delegation - dynamically add route to delegated prefix via requesting router.
The router does not automatically configure the prefix route that the client received. If you use the client's link-local address for the prefix route then everything works. The client also uses the dhcpv6-server link-local address for the default route.