vyos@r4# set firewall ipv4 input filter rule 10 action accept
[edit]
vyos@r4# set firewall ipv4 input filter rule 10 ipsec match-ipsec
[edit]
vyos@r4# 
[edit]
vyos@r4# commit
[ firewall ]
Failed to apply firewall: /run/nftables.conf:19:17-27: Error: No such
file or directory; did you mean table ‘vyos_filter’ in family ip? delete
table ip vyos_filter                 ^^^^^^^^^^^
/run/nftables.conf:47:18-28: Error: No such file or directory; did you
mean table ‘vyos_filter’ in family ip? delete table ip6 vyos_filter
^^^^^^^^^^^ /run/nftables.conf:75:21-31: Error: No such file or
directory; did you mean table ‘vyos_filter’ in family ip? delete table
bridge vyos_filter                     ^^^^^^^^^^^

set dummy dum0 address '172.20.215.131/32'
comment dummy dum0 'Dummy interface for BFD traffic'
set peer 172.20.215.130 multihop
set peer 172.20.215.130 profile 'bgp'
set peer 172.20.215.130 source address '172.20.215.131'
set profile bgp interval echo-interval '500'
set profile bgp interval multiplier '10'
set profile bgp interval receive '100'
set profile bgp interval transmit '100'

vyos@r1# tc class show dev eth1
class htb 1:1 root rate 1Gbit ceil 1Gbit burst 1375b cburst 1375b
class htb 1:64 parent 1:1 leaf 8005: prio 0 rate 100Mbit ceil 100Mbit burst 15337b cburst 1600b
class htb 1:65 parent 1:1 leaf 8006: prio 7 rate 750Mbit ceil 900Mbit burst 130968b cburst 1462b
[edit]
vyos@r1#

trae@cr01b-vyos:~$ configure
WARNING: There was a config error on boot: saving the configuration now could overwrite data.
You may want to check and reload the boot config
[edit]
trae@cr01b-vyos# comp saved
[interfaces bonding bond0]
- policy