vyos@r1# set firewall group network-group NG network 198.51.100.0/24
[edit]
vyos@r1# commit
[edit]
vyos@r1# set firewall group network-group NG network 198.51.100.99/32
[edit]
vyos@r1# commit
[edit]
vyos@r1#

r1(config-router)# neighbor eth1 interface peer-group

vyos@r1# set protocols bgp 65001 neighbor eth1 interface peer-group 
Possible completions:
   <text>       peer group for this peer

vyos@r1:~$ sudo sysctl -a | grep send_redire
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.dum0.send_redirects = 0
net.ipv4.conf.eth0.send_redirects = 0
net.ipv4.conf.eth1.send_redirects = 0
net.ipv4.conf.eth2.send_redirects = 0
net.ipv4.conf.eth3.send_redirects = 0
net.ipv4.conf.eth4.send_redirects = 0
net.ipv4.conf.eth5.send_redirects = 0
net.ipv4.conf.eth6.send_redirects = 0
net.ipv4.conf.lo.send_redirects = 1
vyos@r1:~$ 
vyos@r1:~$ 
vyos@r1:~$ reboot now

vyos@r1# run generate wireguard client-config c1 interface wg0 server 203.0.113.1 address 10.0.0.2/32

vyos@r1# set policy local-route
Possible completions:
 > local-route  IPv4 policy route of local traffic
 > local-route6 IPv6 policy route of local traffic

vyos@r1:~$ generate vpn x509 key-pair testone
Can't open /etc/key-pair.template for reading, No such file or directory
140089191929024:error:02001002:system library:fopen:No such file or directory:../crypto/bio/bss_file.c:69:fopen('/etc/key-pair.template','r')
140089191929024:error:2006D080:BIO routines:BIO_new_file:no such file:../crypto/bio/bss_file.c:76:
vyos@r1:~$ cat /etc/key-pair.template
cat: /etc/key-pair.template: No such file or directory
vyos@r1:~$ 
vyos@r1:~$ sudo find / -name key-pair.template
/boot/rw/opt/vyatta/etc/key-pair.template
/opt/vyatta/etc/key-pair.template

vyos@r1#  set fire group address-group foo add 10.1.0.2-10.1.0.3
[edit]
vyos@r1#  set fire group address-group foo add 10.1.0.2-10.1.0.5
[edit]
vyos@r1# compare 
+firewall {
+    all-ping enable
+    broadcast-ping disable
+    config-trap disable
+    group {
+        address-group foo {
+            address 10.1.0.2-10.1.0.3
+            address 10.1.0.2-10.1.0.5
+        }
+    }
+    ipv6-receive-redirects disable
+    ipv6-src-route disable
+    ip-src-route disable
+    log-martians enable
+    receive-redirects disable
+    send-redirects enable
+    source-validation disable
+    syn-cookies enable
+    twa-hazards-protection disable
+}
[edit]
vyos@r1# commit
[ firewall group address-group foo ]
Address 10.1.0.2 exists in more than one configuration enrty

release dhcp interface eth1

vyos@r1# run show conf com | match "traf|bon"
set interfaces bonding bond0 member interface 'eth1'
set interfaces bonding bond0 traffic-policy in 'BAND-IN'
set traffic-policy limiter BAND-IN class 1601 bandwidth '100mbit'
set traffic-policy limiter BAND-IN class 1601 match 16xx vif '1601'
set traffic-policy limiter BAND-IN default bandwidth '10gbit'
set traffic-policy shaper BAND-OUT class 1602 bandwidth '100mbit'
set traffic-policy shaper BAND-OUT class 1602 match 16xx vif '1602'
set traffic-policy shaper BAND-OUT default bandwidth '10gbit'
[edit]
vyos@r1# run show ver

set system option root-partition-auto-resize

vyos@r1# show interfaces ethernet eth2
 description LAN
 hw-id 52:54:00:6c:c7:ac
 vrf foo
[edit]
vyos@r1# compare 
[edit interfaces bridge br11]
+member {
+    interface eth2 {
+    }
+}
[edit]
vyos@r1# 
[edit]
vyos@r1# commit
[ interfaces bridge br11 ]
Can not add interface "eth2" to bridge, it has a VRF assigned!

set interfaces pppoe pppoe2 ipv6

root@r14:/home/vyos# podman ps
CONTAINER ID  IMAGE                                   COMMAND     CREATED             STATUS                 PORTS       NAMES
d49f99e058d7  localhost/vyos:1.3-stable-202308240442  /sbin/init  About a minute ago  Up About a minute ago              vyos
root@r14:/home/vyos# 
root@r14:/home/vyos# 
root@r14:/home/vyos# sudo podman exec -ti vyos su - vyos
vyos@vyos:~$ 
vyos@vyos:~$ 
vyos@vyos:~$ show version