PR https://github.com/vyos/vyos-1x/pull/2065

set qos interface eth0 ingress '300m-in'
set qos policy limiter 300m-in default bandwidth '300mbit'
set qos policy limiter 300m-in default burst '125000000b'
commit

The IPv6 reverse path filter functionality would be great if it worked properly.
On the other hand, the current sysctl based solution does not allow for adding exceptions.

https://github.com/vyos/vyos-1x/pull/2063

I think I found the real problem:

That fixes it. It does seem like more of a band-aid solution though. I don't want to have to do that for every router I deploy using this setup

Wireguard is not yet exists in the system when tun is already exists due to priority

vyos@r14:~$ /opt/vyatta/sbin/priority.pl | match "tun|wireguard"
380 interfaces/tunnel
381 interfaces/wireguard

Thank you very much, I compiled the image, now it remains only to check.
As soon as I check, I will write.

Hi @vfreex . The idea is to add this feature, and several more, once we get new firewall cli structure: https://github.com/vyos/vyos-1x/pull/2016

The above setting works and also if configured like this:

Try set protocols bgp neighbor eth1 interface remote-as xxx

Same in https://forum.vyos.io/t/need-some-help-troubleshooting-nic-detection/11291/15

I was able to test this for ISIS. I'll test OSPF hopefully tomorrow.

In rolling release, it does not accept remote-as configured as a part of peer-group, commit error is received:

I opened PR https://github.com/vyos/vyos-1x/pull/2062 for this.

The issue was fixed with update container image vyos/vyos-build:current to the latest

I found the following log in /run/udev/log/vyos-net-name from the vyos_net_name python script:

In T5324#151306, @Viacheslav wrote:

e2 it is a temporary name to rename ethX in correct way
You have to use “ethernet ethX address x.x.x.x”

I found invalid interface name with lastest build (fresh install and none configuration)

https://github.com/vyos/vyos-build/pull/370

I found your devices supported but I need build and check again.

@aztec102 please show version running.

e2 it is a temporary name to rename ethX in correct way
You have to use “ethernet ethX address x.x.x.x”

PR:
https://github.com/vyos/vyos-1x/pull/2060

@apasheev it were rewritten in https://github.com/vyos/vyos-1x/pull/1567/files#diff-7839502816137d55f673c064e6ec87a2eed7dc80563b1e307363c3e4b090a2b3R302

set policy route-map FOO rule 10 set extcommunity rt '1111:2222222'
set policy route-map FOO rule 10 set extcommunity rt '33:444'
set policy route-map FOO rule 10 action permit

PR https://github.com/vyos/vyos-1x/pull/2059
PR https://github.com/vyos/vyos-build/pull/369

This would be a great feature to have on VyOS.

PR Equuleus: https://github.com/vyos/vyos-build/pull/368

PR for equulues https://github.com/vyos/vyos-1x/pull/2058