The new design introduced with https://phabricator.vyos.net/T2653 does not show any pitfalls and infact increased the code maintenance in an unimaginable way.
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed All Stories
All Stories
All Stories
Nov 23 2020
Nov 23 2020
c-po moved T578: Support Linux Container from Need Triage to Backlog on the VyOS 1.3 Equuleus board.
c-po moved T2857: Cleanup Intel QAT configuration script from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2887: WiFi ht40+ channel width is not set in hostaptd.conf from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2904: 802.1ad / Q-in-Q ethertype default not utilized from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2879: Cleanup 4.19.144 kernel configuration from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2891: Support to change ring-buffers from CLI from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2886: RADIUS authentication broken only returns operator level from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2901: Update Linux Kernel to v4.19.146 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2896: set ip route 0.0.0.0/0 dhcp-interface eth0 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2880: Update Linux Kernel to v4.19.145 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3064: Update Linux Kernel to v4.19.157 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3033: Update Linux Kernel to v4.19.154 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3034: Add WiFi WPA 3 support from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3027: Unable to update system Signature check FAILED from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3016: dhcp-server: use better constraint error message on invalid subnet from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3038: Supporting AZERTY keyboards from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3046: openvpn directory is not auto-created from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3041: Intel QAT: vyos-1.3-rolling-202011020217-amd64 kernel panic during configure from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3043: Wireless: Refactor CLI from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3066: reboot in - Invalid time from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3063: Add support for Huawei LTE Module ME909s-120 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3049: Update Linux Kernel to v4.19.155 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3051: OpenVPN: multiple client routes do not work in server mode from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3050: Broken address/subnet validation on NAT configuration from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3060: OpenVPN virtual interface not coming up after upgrade from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3052: Update Linux firmware files to 20201022 version from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2984: (igb, ixgbe) HW queues applied only for the first 2 interfaces from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2914: OpenVPN: Fix for IPv4 remote-host hostname in client mode: from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2906: OpenVPN: tls-auth missing key direction from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2905: Sync CLI nodes between PPPoE and WWAN interface from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2907: OpenVPN: Option to disable encryption from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2915: Lost "proxy-arp-pvlan" option for vlan from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2918: Accounting interim jitter for pppoe, l2tp, pptp, ipoe from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2919: PPPoE server: Called-Station-Id attribute from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2917: PPPoE server: Preallocate NAS-Port-Id from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2976: Client IP pool does not work for PPPoE local users from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2930: Support configuration of MAC address for VXLAN and GENEVE tunnel from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2925: Update Linux Kernel to v4.19.147 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2928: MTU less then 1280 bytes and IPv6 will raise FileNotFoundError from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2938: Adding remote Syslog RFC5424 compatibility from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2936: Migrate PPPoE server to get_config_dict() do reduce boilerplate code from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2978: IPoE service does not work on shared mode from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2955: Update Linux Kernel to v4.19.149 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2956: Add support for list of defaultValues from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2960: sstp: migrate to get_config_dict() from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2967: Duplicate IPv6 BFD peers created from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2972: PPPoE server rate limiter allows max 65535 kbps to be set from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2973: tftp-server cannot listen on IPv6 address from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2980: FRR bfdd crash due to invalid length from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2981: MPLS LDP neighbor session clear capability from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2985: Add glue code to create bridge interface on demand from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2953: Accel-PPP services CLI config cleanup (SSTP, L2TP, PPPoE, IPoE) from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2945: Interface removed from bridge on setting change from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2937: Update Linux Kernel to v4.19.148 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2939: Wireguard Remove Peer Fails from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2948: NAT: OSError when configuring translation address range from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2951: Cannot enable logging for monitor nat from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po added a comment to T2650: interfaces bridge, bonding: revert back to per-interface membership syntax.
Confirmed working
This is actually a "wontfix" b/c it depends on the users hardware
Proper handle OS exceptions for the user:
c-po changed the status of T3084: wifi: TypeError on "show interfaces wireless info" from Open to In progress.
jestabro updated the task description for T3082: multi_to_list must distinguish between values and defaults.
c-po closed T3074: OpenVPN site-to-site creates wrong peer address, a subtask of T3060: OpenVPN virtual interface not coming up after upgrade, as Resolved.
c-po changed the status of T3074: OpenVPN site-to-site creates wrong peer address, a subtask of T3060: OpenVPN virtual interface not coming up after upgrade, from Open to Needs testing.
c-po changed the status of T3074: OpenVPN site-to-site creates wrong peer address from Open to Needs testing.
Try to port NDP Proxy to the NAT66 code of T2518 and automatically generate it
jack9603301 closed T2898: Support NDP proxy, a subtask of T2518: Add support for IPv6 NAT (NPTv6), as Invalid.
Note that because the test requirements are not met for the time being (vyos does not use the linux kernel with a kernel version of 5.8+ for the time being), it cannot be tested well. The merged code has not undergone any testing. Please upgrade the vyos linux kernel to 5.8+ , Let me know that I can perform related tests, and merge after testing
GitHub <noreply@github.com> committed rVYOSONEXc61636c80017: Merge pull request #616 from Cheeze-It/current (authored by c-po).
It looks like this issue is already present in 1.3-rolling-202010270217, before the OpenVPN rewrite to get_config_dict():
c-po added a comment to T3081: get_config_dict() does not honor whitespaces in the CLI values field.
[ interfaces openvpn vtun0 ]
{'auth_user_pass_file': '/run/openvpn/vtun0.pw',
'daemon_group': 'openvpn',
'daemon_user': 'openvpn',
'device_type': 'tun',
'encryption': {'cipher': 'aes256gcm'},
'ifname': 'vtun0',
'keep_alive': {'failure_count': '3', 'interval': '10'},
'mode': 'server',
'openvpn_option': ['tls-auth /config/auth/ovpn_test_site2site.key 0'],
'protocol': 'udp',
'server': {'name_server': ['10.53.53.53', '10.53.53.54'],
'push_route': ['0.0.0.0/0'],
'subnet': ['10.7.178.0/24'],
'topology': 'net30'},
'tls': {'ca_cert_file': '/config/auth/ovpn_test_ca.pem',
'cert_file': '/config/auth/ovpn_test_server.pem',
'dh_file': '/config/auth/ovpn_test_dh.pem',
'key_file': '/config/auth/ovpn_test_server.key'},
'use_lzo_compression': {}}c-po added a comment to T3080: OpenVPN failing silently for a number of reasons in rolling post Nov/02.
We will deal with the compat-names warning once starting on VyOS 1.4 ;)
c-po closed T3080: OpenVPN failing silently for a number of reasons in rolling post Nov/02, a subtask of T3060: OpenVPN virtual interface not coming up after upgrade, as Resolved.
c-po closed T3080: OpenVPN failing silently for a number of reasons in rolling post Nov/02 as Resolved.