Example of usage for 1.5

vyos@r4:~$ 
vyos@r4:~$ show conf com | match upd
set system update-check auto-check
set system update-check url 'https://raw.githubusercontent.com/vyos/vyos-rolling-nightly-builds/main/version.json'
vyos@r4:~$ 
vyos@r4:~$ 
vyos@r4:~$ show system updates 
Current version: 1.5-rolling-202312220023

can you please attach your configuration used for both eth0 and dns dynamic?

I think its a bit odd to completely disable EEE where the solution would be to disable EEE by default but having the config option to adjust for EEE if wanted.

PR https://github.com/vyos/vyos-1x/pull/2689

PR https://github.com/vyos/vyos-1x/pull/2689

Maintainers agreed that we will disable EEE by default - we are a router pushing packets.

PR for 1.5 https://github.com/vyos/vyos-1x/pull/2687

https://github.com/vyos/vyos-1x/pull/2686

In T5721#168743, @giuavo wrote:

I have followed your suggestion: a fresh VyOS install in a VM and tried to load the current configuration. Here are the errors I get:

[ service dns dynamic name service-ovh-eth1-11-web web-options url checkip.dyndns.com ]
"checkip.dyndns.com" is not a valid URL


[ service dns dynamic name service-ovh-eth1-11-web web-options url checkip.dyndns.com ]
Invalid HTTP(S) URL format

[[]] failed

@indrajitr Could you take a look? As I remember you are working on it.

PR for 1.5 https://github.com/vyos/vyos-1x/pull/2683

PR for VyOS 1.5 https://github.com/vyos/vyos-1x/pull/2682 which will also be backported to 1.4

I have followed your suggestion: a fresh VyOS install in a VM and tried to load the current configuration. Here are the errors I get:

Sometimes container is not cleaned properly, see also https://github.com/containers/podman/issues/15708

That means I should create a new VyOS instance and then load my current configuration in order to spot any migration error. I can try that.

On the newest system you can use load /path/to/config

The same task T5712

In T160#168646, @danielpo wrote:

That's great!
I tried running make interface_definitions in vyos-1x and copy in the changed files into my vyos install, but the files kept disappearing when rebooting, and couldn't figure out how to build an iso with your vyos 1-x repo.

So I wil try it when there is a vyos rolling iso available.

In T3316#167494, @indrajitr wrote:

set service dhcp-server dynamic-dns-update
set service dhcp-server hostfile-update
set service dhcp-server shared-network-name LAN authoritative
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 default-router '192.168.1.1'
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 domain-name 'home'
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 name-server '192.168.1.1'
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 range 0 start '192.168.1.120'
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 range 0 stop '192.168.1.230'
set service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 static-mapping ...
...

I also notice that ddclient has a similar problem.

ddclient[1710]: FAILED:   Unable to obtain information for 'pppoe0' -- missing ip or ifconfig command

This might be a problem that's specific to me. I don't know why every systemd start too early.

This was fixed recently for dynamic interfaces like pppoe. @Zen3515 can you please try with 1.5-rolling-202312171632?

PR:
https://github.com/vyos/vyos-1x/pull/2679