release dhcp interface eth1

vyos@r1# run show conf com | match "traf|bon"
set interfaces bonding bond0 member interface 'eth1'
set interfaces bonding bond0 traffic-policy in 'BAND-IN'
set traffic-policy limiter BAND-IN class 1601 bandwidth '100mbit'
set traffic-policy limiter BAND-IN class 1601 match 16xx vif '1601'
set traffic-policy limiter BAND-IN default bandwidth '10gbit'
set traffic-policy shaper BAND-OUT class 1602 bandwidth '100mbit'
set traffic-policy shaper BAND-OUT class 1602 match 16xx vif '1602'
set traffic-policy shaper BAND-OUT default bandwidth '10gbit'
[edit]
vyos@r1# run show ver

set system option root-partition-auto-resize

vyos@r1# show interfaces ethernet eth2
 description LAN
 hw-id 52:54:00:6c:c7:ac
 vrf foo
[edit]
vyos@r1# compare 
[edit interfaces bridge br11]
+member {
+    interface eth2 {
+    }
+}
[edit]
vyos@r1# 
[edit]
vyos@r1# commit
[ interfaces bridge br11 ]
Can not add interface "eth2" to bridge, it has a VRF assigned!

set interfaces pppoe pppoe2 ipv6

root@r14:/home/vyos# podman ps
CONTAINER ID  IMAGE                                   COMMAND     CREATED             STATUS                 PORTS       NAMES
d49f99e058d7  localhost/vyos:1.3-stable-202308240442  /sbin/init  About a minute ago  Up About a minute ago              vyos
root@r14:/home/vyos# 
root@r14:/home/vyos# 
root@r14:/home/vyos# sudo podman exec -ti vyos su - vyos
vyos@vyos:~$ 
vyos@vyos:~$ 
vyos@vyos:~$ show version

set policy prefix-list foo rule 10 action 'permit'
set policy prefix-list foo rule 10 prefix '10.0.0.0/8'

vyos@r1# set interfaces ethernet eth0 mirror 
Possible completions:
   egress       Mirror the egress traffic of the interface to the destination interface
   ingress      Mirror the ingress traffic of the interface to the destination interface

vyos@r1:~$ show pppoe-server interfaces 
interface:   connections:    state:
-----------------------------------
     eth0              1    active
vyos@r1:~$

vyos@r1# set interfaces bridge br0 member interface eth1 
Possible completions:
+  allowed-vlan Specify VLAN id which is allowed in this trunk interface
   cost         Bridge port cost
   isolated     Port is isolated (also known as Private-VLAN)
   native-vlan  Specify VLAN id which should natively be present on the link
   priority     Bridge port priority

r14(config-route-map)# set ip next-hop 
  A.B.C.D       IP address of next hop
  peer-address  Use peer address (for BGP only)
  unchanged     Don't modify existing Next hop address
r14(config-route-map)#

vyos@r1# set firewall group network-group FW-OUT network '191.200.161.8/31'
[edit]
vyos@r1# set firewall group network-group FW-OUT network '191.200.161.8/32'
[edit]
vyos@r1# commit
[edit]
vyos@r1# delete firewall group 
[edit]
vyos@r1# commit
[edit]
vyos@r1#

[edit]
vyos@r1# set policy route-map TEST rule 10 set metric -10
[edit]
vyos@r1# commit
[edit]
vyos@r1# sudo vtysh -c "show run"
Building configuration...