Pull request: https://github.com/vyos/vyos-1x/pull/305
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
All Stories
Apr 5 2020
I was not able to recreate that issue. Both /24 and /8 networks were tested.
All the tests have been done on the VyOS 1.3-rolling-202004020117.
vyos@R7# run show configuration commands | match "mpls|address|ospf" set interfaces dummy dum0 address '1.1.1.1/32' set interfaces ethernet eth1 address '10.0.0.1/24' set protocols mpls ldp discovery transport-ipv4-address '1.1.1.1' set protocols mpls ldp interface 'eth1' set protocols mpls ldp router-id '1.1.1.1' set protocols ospf area 0 network '0.0.0.0/0' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters router-id '1.1.1.1'
set interfaces dummy dum0 address '2.2.2.2/32' set interfaces ethernet eth1 address '10.0.0.2/24' set interfaces ethernet eth2 address '10.0.255.1/24' set protocols mpls ldp discovery transport-ipv4-address '2.2.2.2' set protocols mpls ldp interface 'eth1' set protocols mpls ldp interface 'eth2' set protocols mpls ldp router-id '2.2.2.2' set protocols ospf area 0 network '0.0.0.0/0' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters router-id '2.2.2.2'
set interfaces dummy dum0 address '3.3.3.3/32' set interfaces ethernet eth1 address '10.0.255.2/24' set protocols mpls ldp discovery transport-ipv4-address '3.3.3.3' set protocols mpls ldp interface 'eth1' set protocols mpls ldp router-id '3.3.3.3' set protocols ospf area 0 network '0.0.0.0/0' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters router-id '3.3.3.3'
hi,
Please show router configurations, VyOS_R7, VyOS_R8, VyPS_R9.
I tried mpls configuration as your sample, but I could not establish ldp neighbor.
Apr 4 2020
These are the VyOS 1.2 configuration commands for a mixed-mode 5GHz AP:
Found it. My bad.
Add support PIM dr-priority (Designated Router Election Priority) and IGMP join
https://github.com/vyos/vyos-1x/pull/304
weird, the code is actually there:
That should actually not be possible with the verify() step - looks like a bug in the code
Sure, go ahead. Thanks!
Pull request: https://github.com/vyos/vyos-1x/pull/303
I could not tell you why it was decided to be this way.
As indicated, I could not test this patch.
Pull request: https://github.com/vyos/vyos-1x/pull/301
This work is now completed.
@kroy could you please confirm that we can close this issue :-)
duplicate of T149 ?
I can try to tackle this if noone else is working on it.
This is the logic from my old wireless-hostapd.pl file:
1.3 rolling does not affect.
PR for CRUX https://github.com/vyos/vyatta-cfg-system/pull/122
This is the logic from my old wireless-hostapd.pl file:
Here is the logic from my old wireless-hostapd.pl file:
Aye, from what I see in my old wireless-hostap.pl, logic should go like this. Every "print" is output to the wlanX.cfg which serves as config input for hostapd.