Not sure if it is meaningful to create a new operational vyos command "initiate" or re-write the reset to be consistent with older VyOS.

PR:https://github.com/vyos/vyos-1x/pull/3212

PR https://github.com/vyos/vyos-build/pull/544

@ServerForge, it seems to be working with the v2.0.55-1 version. Could you build a package and re-check?

git clone -b v2.0.55-1 --single-branch  https://github.com/sflow/host-sflow.git
sudo apt-get install -y libpcap0.8-dev
make deb FEATURES="PCAP DROPMON DBUS"

Only ethernet interfaces or bridges are allowed; from their docs https://sflow.net/host-sflow-linux-config.php

PCAP Packet Sampling

It seems a broken local build; close the task.
Reopen if necessary.

"reset vpn ipsec " command and does not reset SAs that are dow

PRs:
https://github.com/vyos/vyos1x-config/pull/25
https://github.com/vyos/libvyosconfig/pull/13

PR:
https://github.com/vyos/vyos-1x/pull/3211

PR: https://github.com/vyos/vyos-1x/pull/3210

We need to implement https://manpages.debian.org/testing/wide-dhcpv6-client/dhcp6c.conf.5.en.html#script like in ipv4 dhcp client

Updated PR to use multi nodes: https://github.com/vyos/vyos-1x/pull/3202

PR https://github.com/vyos/vyos-1x/pull/3200

https://github.com/vyos/vyos-1x/pull/3198

current - https://github.com/vyos/vyos-1x/pull/3195
sagitta - https://github.com/vyos/vyos-1x/pull/3196

https://github.com/vyos/vyos-1x/pull/3194

@sever what do you think about it?

I agree, this tool is not suitable for diagnosing connections between hosts. But it can be used in general as a check of the Internet service provider.

PR https://github.com/vyos/vyos-1x/pull/3193
Extend config-sync for sections qos and system

vyos@r4# set service config-sync section system 
Possible completions:
   conntrack            Connection Tracking
   flow-accounting      Flow accounting
   option               System Options
   sflow                sFlow
   static-host-mapping  Map host names to addresses
   sysctl               Configure kernel parameters at runtime

Thanks @opswill

@Ironeagle My solution is adding this command:

@opswill what is the permanent solution for this? I am also facing the same issue. Thanks in advance

PR:
https://github.com/vyos/vyos-1x/pull/3192

I don't have a RADIUS server handy for testing right now, but radius_user and radius_priv_user are both missing membership to the _kea group as well.

Have installed 1.5-rolling-202403200018 in a VM as a clean install (no prior configs) to dig at this but have hit a block.

@dmbaturin was this completed already?

Yes, as described in the issue, using dynamically added routes works fine. But I want to add the routes manually as I did before with the 1.3.x release.
Using both automatically added routes from PPPoE and setting them statically does not sound like a "sane" config to me.

I have also created a pull request that fixes this issue: https://github.com/vyos/vyos-build/pull/543

Delete set interfaces pppoe pppoe0 no-default-route will let it works. it is the same issue.

Sure but if the function "port auto-power-down" is mapped to the ethtool function of disabling EEE then it should be safe?

PR for current: https://github.com/vyos/vyos-1x/pull/3188

Comments can be set via the API with the following request format:

@jestabro Thanks, a solution definitely seems close.

@L0crian thanks for the details: c-po's PR is part of the solution, but there is more to the story, as you point out.

In T5991#181120, @Viacheslav wrote:

It is not an actual ethernet interface, but you name it as an ethernet interface.
You can check the output sudo ip link show type wireguard or sudo ip link show type tun

It is not an actual ethernet interface, but you name it as an ethernet interface.
You can check the output sudo ip link show type wireguard or sudo ip link show type tun

I tested https://github.com/vyos/vyos-1x/pull/3173 today, and it definitely helps the original use-case of this task. Configuration calling interfaces that come up post-boot, like those installed from a container, persist. The one problem is the interface level config is still deleted on-boot from some check that is performed.