In case there are other just like me who didnt know about "action continue":

Something else to consider is to increase the readcache of squashfs by changing this:

Looking at the kernel configs from both arm and x86 arch:

So what needs to be done is to copy that block and make a separate question regarding:

According to https://github.com/vyos/vyos-1x/blob/current/src/init/vyos-router it should be named:

@anthr76 T5520 would be unrelated to an upgrade from 1.4-rolling-202212310809, as the change to using Bookworm did not occur until 2023. We can take a look at the specific errors that you encountered.

There is a similar case going on at the forum with different workarounds which might help?

@sdev take a look over these repository :

The steps above i can try as a last ditch effort but that means I need to be on site with the device and will require lots of time (and downtime)

I have two scripts
Is it ok?

vyos@r14:~$ sudo ls -la /config/scripts/vyos-postconfig-boot*
-rwxrwxr-x 1 root vyattacfg 413 Sep  6 15:04 /config/scripts/vyos-postconfig-boot.script
-rwxrwxr-x 1 root vyattacfg 230 Jun 27 06:17 /config/scripts/vyos-postconfig-bootup.script
vyos@r14:~$

@Viacheslav Sure. I am on VyOS 1.4-rolling-202309040919 and the issue is fixed. Config gets build correctly

@Niklasthegeek Could you re-check and close it if it was fixed?

@

I think that would be a bad idea comparing to other vendors where you can select if you want to do IPv4 routing and/or IPv6 routing. If both are disabled the device will only do switching/bridging.

Related task T2133
I guess we should drop this option ipv6 disable-forwarding

Ehm, are you sure you operate on the correct config?

Firewall can be turned off. It does not affect the result.

In T5521#158836, @c-po wrote:

Please re-test with latest rolling-release if the issue persists.

A workaround was provided in T5428 for the specific issue.

Cannot pass smoketest for virtual-server which also uses vrrp

PR for current:
https://github.com/vyos/vyos-1x/pull/2211

Now I'm using this build: VyOS 1.4-rolling-202301071830
It's working fine as with active as with passive FTP.

@svd135 Can you provide a version string when you last had it working? Seeing the firewall config might also be helpful.

Please re-test with latest rolling-release if the issue persists.

Thanks for the help so far @Apachez !

My apologies @Apachez this was on 1.4-rolling-202212310809.

PR: https://github.com/vyos/vyos-1x/pull/2208

PR for Sagitta:
https://github.com/vyos/vyos-1x/pull/2207

Well in that case it boils down to if the FRR/vrrpd supports namespaces, various tracking (interface etc) aswell as multicast vs unicast which keepalived seems to support them all.

@dmbaturin Can we close it?

@mhamzahkhan Will be fixed in the next rolling release, could you re-check it?

In T2444#158779, @Apachez wrote:

If the FRR/vrrpd is good enough then the main benefit is that the FRR/vrrpd is already included so no need to also include and use keepalived (unnecessary files and binaries and dependencies).

Things to verify however before a switch is performed (and keepalived is thrown out) is support for vrf/namespaces, various interface and other tracking and multicast vs unicast (it seems that keepalived supports them all - dunno about FRR/vrrpd).

https://docs.frrouting.org/en/latest/vrrp.html

One can enable snmp module through:

I will put this as resolved under protest :-)

To check if it works just use ss -tin, for example:

vyos@r14:~$ ss -tin
State                    Recv-Q                    Send-Q                                        Local Address:Port                                        Peer Address:Port                     Process                                                                                                                                                                                          
ESTAB                    0                         0                                            192.168.122.14:22                                         192.168.122.1:45446                    
	 bbr wscale:7,7 rto:201 rtt:0.103/0.048 ato:40 mss:1448 pmtu:1500 rcvmss:1448 advmss:1448 cwnd:140 ssthresh:138 bytes_sent:126383 bytes_acked:126383 bytes_received:20969 segs_out:2460 segs_in:2592 data_segs_out:2445 data_segs_in:341 bbr:(bw:503652048bps,mrtt:0.018,pacing_gain:1.25,cwnd_gain:2) send 15745242718bps lastsnd:3003449 lastrcv:3005252 lastack:3003448 pacing_rate 623269416bps delivery_rate 503652168bps delivered:2446 app_limited busy:2029ms rcv_space:14600 rcv_ssthresh:64076 minrtt:0.018 snd_wnd:64128
ESTAB                    0                         36                                           192.168.122.14:22                                         192.168.122.1:51320                    
	 bbr wscale:7,7 rto:201 rtt:0.427/0.555 ato:40 mss:1448 pmtu:1500 rcvmss:1448 advmss:1448 cwnd:148 ssthresh:136 bytes_sent:1779503 bytes_retrans:68 bytes_acked:1779399 bytes_received:167865 segs_out:12061 segs_in:12088 data_segs_out:11899 data_segs_in:3996 bbr:(bw:530564808bps,mrtt:0.068,pacing_gain:1.25,cwnd_gain:2) send 4015063232bps lastsnd:30 lastrcv:31 lastack:31 pacing_rate 525259160bps delivery_rate 458772272bps delivered:11899 app_limited busy:27667ms unacked:1 retrans:0/1 dsack_dups:1 rcv_rtt:392993 rcv_space:65229 rcv_ssthresh:84348 minrtt:0.024 snd_wnd:1344128
vyos@r14:~$

It should be disabled by default for all daemons. I guess it will be implemented in T4020
For your issue solution is set system frr snmp ldpd.

I dont know if something would break to run migrate from within another VyOS version but you could test something like this, preferly from last version that worked without errors ("5: 1.4-rolling-202306030305"?):

What VyOS version did you have there?

Note that regarding qdisc it seems that qdisc=fq_codel is nowadays supported according to:

PR https://github.com/vyos/vyos-1x/pull/2206

I do not have a 29-30 migrate script

If the FRR/vrrpd is good enough then the main benefit is that the FRR/vrrpd is already included so no need to also include and use keepalived (unnecessary files and binaries and dependencies).

Using the config you provided in Slack I managed to trace the error (or I think so):

I dont agree this is resolved.

Memtest86+ can easily be included in the iso by altering the lb_config_tmpl variable in https://github.com/vyos/vyos-build/blob/current/scripts/build-vyos-image

I think VyOS might need to accept as default traffic to/from localhost towards itself for both IPv4 and IPv6.

Please help to assign a dev to work with this problem, thanks a lot!

@n.fort
Nope, no VRF set up.

For now, commands are generated by XML to node.def
I don't see an easy way to add the alias feature. Some scripts expect the exact sequence of an argument and it could be broken with this feature.

It only saves the SSH keys https://github.com/vyos/vyatta-cfg-system/blob/c2d9dea2524297404fb27028c1f41124dc47c24f/scripts/install/install-image-existing#L223-L231