set interfaces wireguard wg2 address 'REDACTED_IPV6/64'
set interfaces wireguard wg2 peer mypeer address 'REDACTED_IPV4'
set interfaces wireguard wg2 peer mypeer allowed-ips '::/0'
set interfaces wireguard wg2 peer mypeer persistent-keepalive '60'
set interfaces wireguard wg2 peer mypeer port '51820'
set interfaces wireguard wg2 peer mypeer public-key 'REDACTED'
set interfaces wireguard wg2 private-key 'REDACTED'
set interfaces wireguard wg2 vrf 'test'

set nat source rule 10 destination address '192.0.2.0/24'
set nat source rule 10 exclude
set nat source rule 10 outbound-interface 'any'
set nat source rule 10 protocol 'all'
set nat source rule 10 source address '0.0.0.0/0'
set nat source rule 100 outbound-interface 'eth0'
set nat source rule 100 source address '203.0.113.0/24'
set nat source rule 100 translation address masquerade

vyos@r14# run show nat source rules 
Traceback (most recent call last):
  File "/usr/libexec/vyos/op_mode/nat.py", line 157, in <module>
    res = vyos.opmode.run(sys.modules[__name__])
  File "/usr/lib/python3/dist-packages/vyos/opmode.py", line 118, in run
    res = func(**args)
  File "/usr/libexec/vyos/op_mode/nat.py", line 152, in show_rules
    return _get_formatted_output_rules(nat_rules, direction)
  File "/usr/libexec/vyos/op_mode/nat.py", line 103, in _get_formatted_output_rules
    sport {sport}'''
UnboundLocalError: local variable 'sport' referenced before assignment
[edit]
vyos@r14#

vyos@r14# run show conf com | match bri
set interfaces bridge br0 enable-vlan
set interfaces bridge br0 member interface eth1 allowed-vlan '5-50'
set interfaces bridge br0 member interface eth1 native-vlan '5'
[edit]
vyos@r14# 
[edit]
vyos@r14# run show bridge vlan 
port              vlan-id  
br0               1 PVID Egress Untagged
[edit]
vyos@r14#

set interfaces vxlan vxlan0 group '239.0.0.241'
set interfaces vxlan vxlan0 mtu '1370'
set interfaces vxlan vxlan0 port '4789'
set interfaces vxlan vxlan0 source-interface 'wg0'
set interfaces vxlan vxlan0 vni '123'
set interfaces wireguard wg0 address '100.64.0.1/24'
set interfaces wireguard wg0 peer PEER01 allowed-ips '0.0.0.0/0'
set interfaces wireguard wg0 peer PEER01 public-key 'VVfR5S0yi+QPEJRLr25ZAfzFnwZM40G5WCZ/7ou7h3k='
set interfaces wireguard wg0 private-key 'yGOy08Kv8KUe8rsO6WHeo5jC7YdOAzQK0SJkDFQWlmA='

vyos@r14:~$ show bridge 
Bridge interface br0:
Member    State       MTU    Flags                            Prio
--------  ----------  -----  -------------------------------  ------
dum0      forwarding  1500   broadcast,noarp,up,lower_up      32
eth1.30   forwarding  1500   broadcast,multicast,up,lower_up  32
eth1.55   forwarding  1500   broadcast,multicast,up,lower_up  32

vyos@vyos-lab:~$ reset bgp
Possible completions:
  <x.x.x.x>     BGP IPv4/IPv6 neighbor to clear
  <h:h:h:h:h:h:h:h>
  1-4294967295  Reset peers with the AS number
  all           Clear all peers
  external      Reset all external peers
  ipv4          IPv4 Address Family
  ipv6          IPv6 Address Family
  l2vpn         Layer 2 Virtual Private Network Address Family
  peer-group    Reset all members of peer-group
  prefix        Clear bestpath and re-advertise
  vrf           Virtual Routing and Forwarding (VRF)

set policy prefix-list BARRA32 rule 5 action 'permit'
set policy prefix-list BARRA32 rule 5 ge '32'
set policy prefix-list BARRA32 rule 5 le '32'
set policy prefix-list BARRA32 rule 5 prefix '0.0.0.0/0'
set policy prefix-list UTRSv4s25 rule 5 action 'permit'
set policy prefix-list UTRSv4s25 rule 5 le '25'
set policy prefix-list UTRSv4s25 rule 5 prefix '0.0.0.0/0'
set policy prefix-list6 BARRA128 rule 5 action 'permit'
set policy prefix-list6 BARRA128 rule 5 ge '128'
set policy prefix-list6 BARRA128 rule 5 le '128'
set policy prefix-list6 BARRA128 rule 5 prefix '::/0'
set policy prefix-list6 UTRSv6s49 rule 5 action 'permit'
set policy prefix-list6 UTRSv6s49 rule 5 le '49'
set policy prefix-list6 UTRSv6s49 rule 5 prefix '::/0'