I did this change as you mentioned and it worked, , example:
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Apr 27 2022
@RyVolodya could you recheck it?
Try to replace option restart to reload-or-restart and re-configure from scratch, it may help.
https://github.com/vyos/vyos-1x/blob/363ecfa46cdb8402ea71637717863f01b09f428b/src/conf_mode/protocols_nhrp.py#L107
Hub basic setting :
Yes ,you need to reload the services and it works , here's an basic example with the current configuration :
It is not only for dhcp, any service can be affected to this
There are no many check when we remove interface
@fernando Does it work if you "reload" configuration?
Apr 26 2022
Works as expected
Fixed VyOS 1.4-rolling-202204260601
set nat source rule 10 destination port '!22,telnet,http,123,1001-1005'
nft:
oifname "eth4" tcp dport != { 22-23, 80, 123, 1001-1005 } counter packets 0 bytes 0 masquerade comment "SRC-NAT-10"VyOS 1.3.1-S1 is not affected:
table ip nat {
chain PREROUTING {
type nat hook prerouting priority dstnat; policy accept;
counter packets 1 bytes 112 jump VYATTA_PRE_DNAT_HOOK
}Apr 25 2022
Working fine in VyOS 1.4-rolling-202204250217
Apr 24 2022
Apr 23 2022
Confirmed working. Awesome
I can't reproduce it VyOS 1.4-rolling-202204230217
Apr 22 2022
PR for 1.3 https://github.com/vyos/vyos-1x/pull/1297
Confirmed working using the following CLI options with IPv6 only Cisco 7961G Phone:
Re-open for revision/simplification in:
https://github.com/vyos/vyos-1x/pull/1295
Apr 21 2022
sorry for my late reply , I've been testing this case and I could replicate the same behavior
I am also not expert; I used the options as described by documentation, but do not understand DHCPD in depth.
Backported to equuleus branch of vyos1x-config:
https://github.com/vyos/vyos1x-config/commit/8ad21f6c7e6f37edeca137b2a7dc7c3f7ffc6a20
Apr 20 2022
Confirming the same.
Pull https://github.com/FRRouting/frr/pull/11004 was merged. This needs retesting on the latest FRR
Not a super expert in ISC DHCPd but it feels like the vendor specific options are hardcoded
Tested in VyOS 1.4-rolling-202204130521
Works