Weird - does not happen on my PPPoE test server. Please update us if you find the root cause on this odd behavior with your ISP. Closing this.
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed All Stories
All Stories
All Stories
Apr 20 2020
Apr 20 2020
show dhcp server leases now works, but I've found show dhcp server statistics is broken as well:
vyos@cr01b-vyos:~$ show dhcp server statistics
Traceback (most recent call last):
File "/usr/libexec/vyos/op_mode/show_dhcp.py", line 243, in <module>
leases = len(get_leases(lease_file, state='active', pool=p))
TypeError: get_leases() missing 1 required positional argument: 'leases'GitHub <noreply@github.com> committed rVYOSONEXfa7d69112268: Merge pull request #359 from sever-sever/dns-for-stat (authored by c-po).
GitHub <noreply@github.com> committed rVYOSONEXae6f1052b1d9: Merge pull request #358 from thomas-mangin/T2320 (authored by c-po).
Unknown Object (User) changed the status of T2342: Bridge l2tpv3 + ethX errors from In progress to Needs testing.
PR https://github.com/vyos/vyatta-cfg-system/pull/123
vyatta-cfg-system_1.2.5_amd64.deb405 KBDownload
@Viacheslav can you double-check this package with most popular interfaces in the bridge?
jjakob moved T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Tested latest rolling, hw-id works as expected again (albeit sometimes buggy, but that's nothing new).
If I execute the above command, it seems that IPv6 settings can't really take effect, and the PPPoE link will be broken every ten seconds. Of course, if I restart vyos, it will return to normal and obtain IPv6 normally! Of course, this is just a problem when I execute these commands in my situation. It doesn't mean that it's the only condition to reproduce this bug!
c-po moved T2344: PPPoE server client static IP assignment silently fails from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2344: PPPoE server client static IP assignment silently fails from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.6) board.
What do you mean by:
jestabro moved T2292: Ensure graceful shutdown of vyos-http-api from Need Triage to Backport Candidates on the VyOS 1.3 Equuleus board.
Unknown Object (User) changed the status of T2342: Bridge l2tpv3 + ethX errors from Open to In progress.
Thank you, but I think I found a new bug. After executing the following command, I found that PPPoE frequently relinked, and it seems to return to normal after restarting!
Viacheslav changed the status of T2320: Wireguard creates non-existing interfaces in [op-mode]., a subtask of T2322: CLI [op-mode] bugs. Root task, from Open to Needs testing.
Viacheslav changed the status of T2320: Wireguard creates non-existing interfaces in [op-mode]. from Open to Needs testing.
GitHub <noreply@github.com> committed rVYOSONEXcfc474b3e457: macvlan: pseudo-ethernet: T2341: adjust priority to support bond source… (authored by c-po).
trae32566 awarded T2331: VRRP op-mode errors a Like token.
Apr 19 2020
Apr 19 2020
Unknown Object (User) published a new version of Perl API.
Unknown Object (User) deleted CLI Shell API.
Unknown Object (User) created CLI Shell API.
daniil changed the subtype of T2271: OSPF: add per VRF instance support from "Task" to "Feature Request".
Hehe - the problem here is the upper case F in your IPv6 address - FRR migrates all IPv6 addresses to lowercase letters as per RFC and thus we can't grep for it properly - let me think for a fix.
c-po added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.
Damn - I'm so sorry
My best bet is due to the missing set interfaces pppoe pppoe0 ipv6 address autoconf option.
jjakob updated subscribers of T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.
I can take this on in conjunction with T1499 since there has been no activity on it for a long time and the issue still very much exists.
jjakob added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.
@c-po this is the commit that caused this issue. You renamed the config node but didn't include a migrator. https://github.com/vyos/vyos-1x/commit/021a2470bd67dccfac0a53c9f4ef511640c03101
I'll take this one.
jjakob added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.
I spent the last hour at the console trying to fix this mess. It left me with completely broken internet and also bridged the WAN and one of the LAN ports (several of which are in a bridge). I must've tried rebooting 10 times with both 202004191028 and 202004141515 until I could finally get things to work properly with 202004120117. Before this, I've had problems with 1.2 and 1.3 rolling for years where sometimes the interfaces would get mixed up, but usually one reboot fixed it. Now there is a 100% chance of them being completely mixed up every time.
jjakob triaged T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028 as Urgent! priority.
jjakob changed the status of T2316: DHCP-server op-mode errors, a subtask of T2322: CLI [op-mode] bugs. Root task, from Confirmed to Needs testing.
set firewall all-ping 'enable' set firewall broadcast-ping 'enable' set firewall config-trap 'disable' set firewall ipv6-receive-redirects 'enable' set firewall ipv6-src-route 'enable' set firewall ip-src-route 'enable' set firewall log-martians 'enable' set firewall name wan default-action 'drop' set firewall name wan rule 1 action 'accept' set firewall name wan rule 1 state established 'enable' set firewall name wan rule 1 state related 'enable' set firewall name wan-local default-action 'drop' set firewall name wan-local rule 1 action 'accept' set firewall name wan-local rule 1 state established 'enable' set firewall name wan-local rule 1 state related 'enable' set firewall name wan-local rule 2 action 'accept' set firewall name wan-local rule 2 icmp type-name 'echo-request' set firewall name wan-local rule 2 protocol 'icmp' set firewall name wan-local rule 2 state new 'enable' set firewall name wan-local rule 3 action 'drop' set firewall name wan-local rule 3 destination port '22' set firewall name wan-local rule 3 protocol 'tcp' set firewall name wan-local rule 3 recent count '4' set firewall name wan-local rule 3 recent time '60' set firewall name wan-local rule 3 state new 'enable' set firewall name wan-local rule 4 action 'accept' set firewall name wan-local rule 4 protocol 'tcp' set firewall name wan-local rule 4 state new 'enable' set firewall options interface pppoe0 adjust-mss '1452' set firewall options interface pppoe0 adjust-mss6 '1280' set firewall receive-redirects 'disable' set firewall send-redirects 'enable' set firewall source-validation 'disable' set firewall state-policy established action 'accept' set firewall state-policy established log enable set firewall state-policy invalid action 'accept' set firewall state-policy invalid log enable set firewall state-policy related action 'accept' set firewall state-policy related log enable set firewall syn-cookies 'enable' set firewall twa-hazards-protection 'disable' set interfaces bridge br1 address '192.168.0.1/24' set interfaces bridge br1 address 'fc00:470:f1cd::1/64' set interfaces bridge br1 description 'lan 0' set interfaces bridge br1 dhcpv6-options temporary set interfaces bridge br1 ipv6 address autoconf set interfaces bridge br1 ipv6 address eui64 'fc00:470:f1cd::/64' set interfaces bridge br1 ipv6 dup-addr-detect-transmits '1' set interfaces bridge br1 member interface eth1.1 set interfaces bridge br1 member interface eth2 set interfaces bridge br1 stp set interfaces bridge br2 address '192.168.101.1/24' set interfaces bridge br2 address 'fc00:470:f1cd:101::1/64' set interfaces bridge br2 description 'lan 101' set interfaces bridge br2 dhcpv6-options temporary set interfaces bridge br2 ipv6 address autoconf set interfaces bridge br2 ipv6 address eui64 'fc00:470:f1cd:101::/64' set interfaces bridge br2 ipv6 dup-addr-detect-transmits '1' set interfaces bridge br2 member interface eth0 set interfaces bridge br2 member interface eth1.2 set interfaces bridge br2 member interface eth3 set interfaces bridge br2 member interface eth4 set interfaces bridge br2 stp set interfaces ethernet eth0 description 'LAN' set interfaces ethernet eth0 ipv6 address set interfaces ethernet eth0 ipv6 dup-addr-detect-transmits '1' set interfaces ethernet eth1 description 'Trunk' set interfaces ethernet eth1 vif 1 description 'vlan 1 of eth1' set interfaces ethernet eth1 vif 2 description 'vlan 2 of eth1' set interfaces ethernet eth2 description 'LAN' set interfaces ethernet eth3 description 'LAN' set interfaces ethernet eth4 description 'LAN' set interfaces ethernet eth5 description 'WAN' set interfaces ethernet eth5 disable-flow-control set interfaces ethernet eth5 firewall in name 'wan' set interfaces ethernet eth5 firewall local name 'wan-local' set interfaces pppoe pppoe0 authentication password 'password' set interfaces pppoe pppoe0 authentication user 'username' set interfaces pppoe pppoe0 default-route 'auto' set interfaces pppoe pppoe0 description 'ISP' set interfaces pppoe pppoe0 ipv6 enable set interfaces pppoe pppoe0 mtu '1492' set interfaces pppoe pppoe0 source-interface 'eth5' set nat nptv6 rule 2 description 'IPv6 NPT' set nat nptv6 rule 2 outbound-interface 'pppoe0' set nat nptv6 rule 2 source prefix 'fc00:470:f1cd::/48' set nat nptv6 rule 2 translation prefix '240e:fc:7d:dc27::/64' set nat source rule 1 description 'PUBLIC' set nat source rule 1 log 'enable' set nat source rule 1 outbound-interface 'pppoe0' set nat source rule 1 protocol 'all' set nat source rule 1 source address '0.0.0.0/0' set nat source rule 1 translation address 'masquerade' set protocols static interface-route 0.0.0.0/0 next-hop-interface pppoe0 set protocols static interface-route6 ::/0 next-hop-interface pppoe0 set protocols static table 150 interface-route 0.0.0.0/0 next-hop-interface pppoe0 set protocols static table 150 interface-route6 ::/0 next-hop-interface pppoe0 set service dhcp-server shared-network-name pri101 description 'DHCP 101' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 default-router '192.168.101.1' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.0.254' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.101.1' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.0.1' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 lease '86400' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 ntp-server '192.168.101.1' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 range 0 start '192.168.101.8' set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 range 0 stop '192.168.101.254' set service dhcpv6-server preference '0' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 address-range start fc00:470:f1cd:101::8 stop 'fc00:470:f1cd:101:ffff:ffff:ffff:ffff' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::ff00' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::1' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd:101::1' set service dns forwarding allow-from '192.168.0.0/16' set service dns forwarding allow-from '2001:470:f1cd::/48' set service dns forwarding cache-size '1024' set service dns forwarding domain pve. server '192.168.0.47' set service dns forwarding domain pve. server '2001:470:f1cd::47' set service dns forwarding listen-address '0.0.0.0' set service dns forwarding listen-address '::' set service dns forwarding name-server '114.114.114.114' set service dns forwarding name-server '1.1.1.1' set service dns forwarding name-server '1.0.0.1' set service dns forwarding name-server '2001:470:f1cd::ff00' set service dns forwarding name-server '192.168.0.254' set service dns forwarding system set service https virtual-host vhost0 listen-address '*' set service https virtual-host vhost0 server-name '192.168.0.1' set service mdns repeater interface 'br1' set service mdns repeater interface 'br2' set service router-advert interface br1 set service router-advert interface br2 set service ssh listen-address '0.0.0.0' set system acceleration set system config-management commit-revisions '100' set system console device ttyS0 speed '115200' ...skipping... set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::ff00' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::1' set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd:101::1' set service dns forwarding allow-from '192.168.0.0/16' set service dns forwarding allow-from '2001:470:f1cd::/48' set service dns forwarding cache-size '1024' set service dns forwarding domain pve. server '192.168.0.47' set service dns forwarding domain pve. server '2001:470:f1cd::47' set service dns forwarding listen-address '0.0.0.0' set service dns forwarding listen-address '::' set service dns forwarding name-server '114.114.114.114' set service dns forwarding name-server '1.1.1.1' set service dns forwarding name-server '1.0.0.1' set service dns forwarding name-server '2001:470:f1cd::ff00' set service dns forwarding name-server '192.168.0.254' set service dns forwarding system set service https virtual-host vhost0 listen-address '*' set service https virtual-host vhost0 server-name '192.168.0.1' set service mdns repeater interface 'br1' set service mdns repeater interface 'br2' set service router-advert interface br1 set service router-advert interface br2 set service ssh listen-address '0.0.0.0' set system acceleration set system config-management commit-revisions '100' set system console device ttyS0 speed '115200' set system domain-name 'router' set system host-name 'vyos' set system ip arp table-size '2048' set system ip multipath layer4-hashing set system ipv6 multipath layer4-hashing set system ipv6 neighbor table-size '2048' set system ipv6 strict-dad set system login user vyos authentication encrypted-password '$6$UaXQViDvJ.Hr$85U/9Q5d/tc9hdtrnntMVgrztOCext..OJCHaJYZUo82GAdD95lchvSjI3vCZJTNte7cIAs87YctYlXODGXAz1' set system login user vyos authentication plaintext-password '' set system name-server '192.168.0.1' set system ntp allow-clients address '192.168.0.0/16' set system ntp allow-clients address 'fc00:470:f1cd::/48' set system ntp listen-address '::' set system ntp listen-address '0.0.0.0' set system ntp server 0.centos.pool.ntp.org set system ntp server 1.centos.pool.ntp.org set system ntp server 2.centos.pool.ntp.org set system ntp server 3.centos.pool.ntp.org set system ntp server ntp.qhjack.cn set system sysctl custom net.ipv4.conf.all.rp_filter value '0' set system sysctl custom net.ipv4.conf.default.rp_filter value '0' set system sysctl custom net.ipv4.conf.eth0.rp_filter value '0' set system sysctl custom net.ipv6.conf.all.accept_ra value '2' set system sysctl custom net.ipv6.conf.all.forwarding value '1' set system syslog global facility all level 'info' set system syslog global facility protocols level 'debug' set system time-zone 'Asia/Shanghai'
Can you please post the configuration as show configuration commands from op-mode level? Then it will become easier to reproduce it. Thanks
The configuration is as follows:
Please share your configuration and where you expect an IPv6 address to pop up
Apr 18 2020
Apr 18 2020
alainlamar closed T2210: vyos-1x: WiFi interfaces as bridge slaves, hostapd config items missing as Invalid.
The hostapd.conf says that this might not be needed anymore.
alainlamar added a comment to T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.
Thought about some quirks. Did not touch the reset button yet but had in mind to use it as some ACPI power button to enable cold boot by pressing a button, not unplugging and replugging odd wires. Resetting the config by that button would be a waste of that button. You would have to hook up to the APU board by serial again in order to revive it. If you did so, you might as well just have moved away the bad config and reboot :-) Once I get a hang of how that reset button works (gotta look into the GPIO stuff), I'll open a new ticket. Maybe we can add some generic config wizzardry to set up LEDs and GPIOs once we get a good grasp on it.