DEBUG - Running Testcase: /usr/libexec/vyos/tests/smoke/cli/test_interfaces_pppoe.py
DEBUG - test_pppoe_authentication (__main__.PPPoEInterfaceTest.test_pppoe_authentication) ... ok
DEBUG - test_pppoe_client (__main__.PPPoEInterfaceTest.test_pppoe_client) ... FAIL
DEBUG - test_pppoe_client_disabled_interface (__main__.PPPoEInterfaceTest.test_pppoe_client_disabled_interface) ... ok
DEBUG - test_pppoe_dhcpv6pd (__main__.PPPoEInterfaceTest.test_pppoe_dhcpv6pd) ... ok
DEBUG - test_pppoe_mtu_mru (__main__.PPPoEInterfaceTest.test_pppoe_mtu_mru) ... ok
DEBUG - test_pppoe_options (__main__.PPPoEInterfaceTest.test_pppoe_options) ... ok
DEBUG -
DEBUG - ======================================================================
DEBUG - FAIL: test_pppoe_client (__main__.PPPoEInterfaceTest.test_pppoe_client)
DEBUG - ----------------------------------------------------------------------
DEBUG - Traceback (most recent call last):
DEBUG -   File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_pppoe.py", line 179, in test_pppoe_client
DEBUG -     self.assertTrue(any(iface == interface for (iface, _) in tmp))
DEBUG - AssertionError: False is not true
DEBUG -
DEBUG - ----------------------------------------------------------------------
DEBUG - Ran 6 tests in 77.628s

Oct 07 12:36:52 r14 staticd[2000]: [PNYPZ-BCP8Y] Static Route using pppoe20 interface not installed because the interface does not exist in specified vrf

vyos@r14:~$ show version 
Version:          VyOS 1.5-stream-202510060458
Release train:    circinus
Release flavor:   generic

set container name radius allow-host-networks
set container name radius image 'dchidell/radius-web'
set container name radius volume accel destination '/usr/share/freeradius/dictionary.accel'
set container name radius volume accel source '/usr/share/accel-ppp/radius/dictionary.accel'
set container name radius volume clients destination '/etc/raddb/clients.conf'
set container name radius volume clients source '/config/containers/radius/clients'
set container name radius volume dictionary destination '/usr/share/freeradius/dictionary'
set container name radius volume dictionary source '/config/containers/radius/dictionary'
set container name radius volume users destination '/etc/raddb/users'
set container name radius volume users source '/config/containers/radius/users'
set service pppoe-server access-concentrator 'ACN'
set service pppoe-server authentication mode 'radius'
set service pppoe-server authentication radius server 192.168.122.14 key 'vyos-secret'
set service pppoe-server client-ip-pool FIRST range '100.64.0.0/18'
set service pppoe-server client-ipv6-pool IPv6-POOL delegate 2001:db8:8003::/48 delegation-prefix '56'
set service pppoe-server client-ipv6-pool IPv6-POOL prefix 2001:db8:8002::/48 mask '64'
set service pppoe-server default-ipv6-pool 'IPv6-POOL'
set service pppoe-server default-pool 'FIRST'
set service pppoe-server gateway-address '100.64.0.1'
set service pppoe-server interface eth1 combined
set service pppoe-server interface eth1.23
set service pppoe-server log level '5'
set service pppoe-server name-server '1.1.1.1'
set service pppoe-server name-server '1.0.0.1'
set service pppoe-server ppp-options disable-ccp
set service pppoe-server ppp-options ipv6 'allow'
set service pppoe-server session-control 'disable'

client-1	Cleartext-Password := "client-1"
    Service-Type = Framed-User,
    Accel-VRF-Name = "red",
    Framed-IP-Address = 10.0.0.11,
    Stateful-IPv6-Address-Pool = "IPv6-POOL",
    Delegated-IPv6-Prefix-Pool = "IPv6-POOL",
    Framed-Route = "100.64.0.11/32 10.0.0.11 1",
    Framed-Protocol = PPP

Other nodes the config is similar, but without NAT
Show neighbors:

# def enable(log=True):
def enable(log=False):

vyos@r14# set vpp settings interface eth1 driver xdp 
[edit]
vyos@r14# commit
[edit]
vyos@r14# set vpp settings interface eth1 xdp-options num-rx-queues 
Possible completions:
   <1-65535>            Number of receive queues to connect to
   all                  All (default)

vyos@r15# run show conf com | match dhcp
set interfaces pppoe pppoe1 dhcpv6-options pd 1 interface dum1
set interfaces pppoe pppoe2 dhcpv6-options pd 1 interface dum2
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 lease '86400'
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 range 0 start '10.0.0.100'
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 range 0 stop '10.0.0.199'
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 static-mapping myPC ip-address '10.0.0.130'
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 static-mapping myPC mac '52:54:00:28:23:f1'
set service dhcp-server shared-network-name LAN subnet 10.0.0.0/24 subnet-id '10'
[edit]
vyos@r15# 
[edit]
vyos@r15# run show dhcp server leases 
IP Address    MAC address        State    Lease start                Lease expiration           Remaining    Pool    Hostname    Origin
------------  -----------------  -------  -------------------------  -------------------------  -----------  ------  ----------  --------
10.0.0.130    52:54:00:28:23:f1  active   2025-09-25 03:47:47+00:00  2025-09-26 03:47:47+00:00  23:59:28     LAN     mypc        local
[edit]
vyos@r15# 
[edit]
vyos@r15# 
[edit]
vyos@r15# run show ver
Version:          VyOS 1.5-stream-2025-Q2
Release train:    circinus
Release flavor:   generic