A developer I work with reports this:

After nearly 30 reinstalls the upgrade finally blew up. The issue is in the initial copying of the config file, between lines 182 and 219 in the install script. That's where it happens... what's causing it / how it happens is still unclear...

PR: https://github.com/vyos/vyos-1x/pull/2078

I'm encountering similar issues on upgrade as well: the configuration fails to apply because of a broken config.boot file (incomplete; stops partway through, perhaps a migration issue?)

https://github.com/vyos/vyatta-cfg-quagga/pull/100 I have tried to fixed it. Works on my local system.
But need migration script.

Can we close this task?

Check if it exists in the kernel.

zcat /proc/config.gz | grep PARPORT

@Apachez Thanks!

set system option keyboard-layout se-latin1

Verified in vyos-1.4-rolling-202307060317-amd64.iso but Im biased :-)

Just tried to upgrade from April image and its failed with this error :(

Right, i found in modules ArchLinux support it.

Implementation here:
https://github.com/vyos/vyos-1x/compare/current...jestabro:from-defaults

@cuongdt1994
I installed Arch linux, there is already a parport_pc in the kernel, the device is perfectly defined.
Why it doesn’t work here, I don’t understand, despite the fact that there is no parport module in lsmod

@aztec102 https://github.com/torvalds/linux/blob/master/drivers/parport/Kconfig

Hi @marekm - Hope you are well.

In talking with the vendor, this appears to be an incompatibility with the WiFi card and the coreboot BIOS installed on the device. Tested with a second device that had a different card installed, and no such errors are present now.

basic configuration :

Merged with current: https://github.com/vyos/vyos-1x/commit/8afdb5ad5515a0a1ae716204f397f3d974cec714

In preparing/testing a revised pull-request to fix a merge conflict, with version 1.4-rolling-202307050317, the testing commands need to be slightly modified.

Pull request created: https://github.com/vyos/vyos-1x/pull/2075

Actual file to modify for commit: https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system-option.xml.in

@cuongdt1994 Thanks a lot, I'll definitely check it out.

Verified this particular request by modifying node.def and be able to select se-latin1.

Selectable keymaps are available in /usr/share/keymaps/i386/

PR : https://github.com/vyos/vyos-1x/pull/2073

PR: https://github.com/vyos/vyos-1x/pull/2072

Try and report, it's included in kernel:
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m

Ok, I will try

@cuongdt1994
The kernel has assembled, as a result, the image now cannot be assembled
vyos-build/data/defaults.json change version 6.4.0

It can work if you use

There are several layouts

se-fi-ir209
se-fi-lat6
se-ir209
se-lat6

Under normal operations the VyOS box looks like this for OSPF:

Added new commands and documentation

PR submitted for review:

In T5325#151572, @aztec102 wrote:

@cuongdt1994 I did not build the kernel, I built the image and specified the modules in the file. Which you were talking about earlier.

I can update the documentation when the feature is implemented.

@cuongdt1994 I did not build the kernel, I built the image and specified the modules in the file. Which you were talking about earlier.

@daniil could you re-check?

set qos interface eth0 ingress '1G-in'
set qos policy limiter 1G-in default bandwidth '1gbit'
set qos policy limiter 1G-in default burst '125000000b'