Thank you, but I think I found a new bug. After executing the following command, I found that PPPoE frequently relinked, and it seems to return to normal after restarting!

Apr 20 2020, 7:11 AM · VyOS 1.3 Equuleus (1.3.0)

Viacheslav changed the status of T2320: Wireguard creates non-existing interfaces in [op-mode]., a subtask of T2322: CLI [op-mode] bugs. Root task, from Open to Needs testing.

Apr 20 2020, 6:53 AM · VyOS 1.3 Equuleus (1.3.0)

Viacheslav changed the status of T2320: Wireguard creates non-existing interfaces in [op-mode]. from Open to Needs testing.

Apr 20 2020, 6:53 AM · VyOS 1.3 Equuleus (1.3.0)

GitHub <noreply@github.com> committed rVYOSONEXcfc474b3e457: macvlan: pseudo-ethernet: T2341: adjust priority to support bond source… (authored by c-po).

Apr 20 2020, 5:56 AM

c-po closed T2341: Pseudo-ethernet Interfaces Not Loaded on Boot as Resolved.

Apr 20 2020, 5:55 AM · VyOS 1.3 Equuleus (1.3.0)

trae32566 awarded T2331: VRRP op-mode errors a Like token.

Apr 20 2020, 4:27 AM · VyOS 1.3 Equuleus (1.3.0)

trae32566 created T2341: Pseudo-ethernet Interfaces Not Loaded on Boot.

Apr 20 2020, 3:59 AM · VyOS 1.3 Equuleus (1.3.0)

Apr 19 2020

Unknown Object (User) published a new version of Perl API.

Apr 19 2020, 11:22 PM

Unknown Object (User) deleted CLI Shell API.

Apr 19 2020, 9:24 PM

Unknown Object (User) created CLI Shell API.

Apr 19 2020, 9:24 PM

daniil changed the subtype of T2271: OSPF: add per VRF instance support from "Task" to "Feature Request".

Apr 19 2020, 7:44 PM · VyOS 1.3 Equuleus (1.3.0)

c-po edited a custom field on T2340: Remove informational "sg" messages from syslog.

Apr 19 2020, 7:17 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2340: Remove informational "sg" messages from syslog as Resolved.

Apr 19 2020, 7:17 PM · VyOS 1.3 Equuleus (1.3.0)

c-po created T2340: Remove informational "sg" messages from syslog.

Apr 19 2020, 6:50 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2338: Can't delete static IPv6 route on vrf as Resolved.

Apr 19 2020, 6:48 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2338: Can't delete static IPv6 route on vrf.

Hehe - the problem here is the upper case F in your IPv6 address - FRR migrates all IPv6 addresses to lowercase letters as per RFC and thus we can't grep for it properly - let me think for a fix.

Apr 19 2020, 6:07 PM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2338: Can't delete static IPv6 route on vrf.

Apr 19 2020, 5:53 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028 as Resolved.

Apr 19 2020, 5:35 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEXd579a6c16c69: xml: T2337: bugfix on missing hw-id node.

Apr 19 2020, 5:35 PM

c-po claimed T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.

Apr 19 2020, 5:35 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.

Damn - I'm so sorry

Apr 19 2020, 5:32 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX38ec47e3fabf: vyos.validate: remove extra print() in is_bridge_member().

Apr 19 2020, 5:29 PM

c-po committed rVYOSONEX7b39e818c8c9: l2tpv3: fix missing "," within default_config_data.

Apr 19 2020, 5:17 PM

c-po added a comment to T2335: Unable to assign IPv6 from ISP.

My best bet is due to the missing set interfaces pppoe pppoe0 ipv6 address autoconf option.

Apr 19 2020, 5:04 PM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2335: Unable to assign IPv6 from ISP.

Apr 19 2020, 4:01 PM · VyOS 1.3 Equuleus (1.3.0)

c-po assigned T2339: OpenVPN: IPv4 no longer working after adding IPv6 support to jjakob.

Apr 19 2020, 3:59 PM · VyOS 1.3 Equuleus (1.3.0)

c-po created T2339: OpenVPN: IPv4 no longer working after adding IPv6 support.

Apr 19 2020, 3:59 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEXc54b7508db6b: openvpn: T2336: delete auth-user-pass file when interface is unused #2.

Apr 19 2020, 3:55 PM

c-po committed rVYOSONEX580dde963f38: openvpn: T2308: fix path to UNIX control socket.

Apr 19 2020, 3:41 PM

c-po closed T2308: openvpn op-mode scripts broken after migrating to systemd service as Resolved.

Apr 19 2020, 3:41 PM · VyOS 1.3 Equuleus (1.3.0), openvpn

c-po added a reverting change for rVYOSONEX26adfd6d0d03: openvpn: T2336: delete auth-user-pass file when interface is unused: rVYOSONEX2f63c5abc93f: Revert "openvpn: T2336: delete auth-user-pass file when interface is unused".

Apr 19 2020, 3:38 PM

c-po committed rVYOSONEX2f63c5abc93f: Revert "openvpn: T2336: delete auth-user-pass file when interface is unused".

Apr 19 2020, 3:38 PM

c-po committed rVYOSONEX26adfd6d0d03: openvpn: T2336: delete auth-user-pass file when interface is unused.

Apr 19 2020, 3:38 PM

c-po committed rVYOSONEX70e008f858be: openvpn: T2336: fix auth-user-pass file generation.

Apr 19 2020, 3:36 PM

c-po claimed T2308: openvpn op-mode scripts broken after migrating to systemd service.

Apr 19 2020, 3:36 PM · VyOS 1.3 Equuleus (1.3.0), openvpn

c-po closed T2336: OpenVPN service fails to start as Resolved.

Apr 19 2020, 3:35 PM · VyOS 1.3 Equuleus (1.3.0)

c-po changed the status of T2336: OpenVPN service fails to start from Open to In progress.

Apr 19 2020, 3:24 PM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2336: OpenVPN service fails to start.

Apr 19 2020, 3:24 PM · VyOS 1.3 Equuleus (1.3.0)

jjakob added a comment to T2336: OpenVPN service fails to start.

Caused by T2273, issue is also in T2308: systemd uses a private /tmp dir. Should be moved to /run/openvpn or the systemd-private dir disabled (I prefer the 1st option)

Apr 19 2020, 1:41 PM · VyOS 1.3 Equuleus (1.3.0)

jjakob updated subscribers of T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.

Apr 19 2020, 1:37 PM · VyOS 1.3 Equuleus (1.3.0)

jjakob added a comment to T577: Unconfigured Ethernet interface discovery partial failure on boot.

I can take this on in conjunction with T1499 since there has been no activity on it for a long time and the issue still very much exists.

Apr 19 2020, 1:07 PM · VyOS Rolling, Bugs

jjakob added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.

@c-po this is the commit that caused this issue. You renamed the config node but didn't include a migrator. https://github.com/vyos/vyos-1x/commit/021a2470bd67dccfac0a53c9f4ef511640c03101

Apr 19 2020, 1:04 PM · VyOS 1.3 Equuleus (1.3.0)

jjakob added a comment to T1499: Move nic to mac mapping out of the configuration file.

I'll take this one.

Apr 19 2020, 12:57 PM

jjakob added a comment to T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028.

I spent the last hour at the console trying to fix this mess. It left me with completely broken internet and also bridged the WAN and one of the LAN ports (several of which are in a bridge). I must've tried rebooting 10 times with both 202004191028 and 202004141515 until I could finally get things to work properly with 202004120117. Before this, I've had problems with 1.2 and 1.3 rolling for years where sometimes the interfaces would get mixed up, but usually one reboot fixed it. Now there is a 100% chance of them being completely mixed up every time.

Apr 19 2020, 12:55 PM · VyOS 1.3 Equuleus (1.3.0)

Raeven created T2338: Can't delete static IPv6 route on vrf.

Apr 19 2020, 11:57 AM · VyOS 1.3 Equuleus (1.3.0)

jjakob triaged T2337: hw-id gone missing from interfaces after upgrade to 1.3-rolling-202004191028 as Urgent! priority.

Apr 19 2020, 11:37 AM · VyOS 1.3 Equuleus (1.3.0)

Raeven created T2336: OpenVPN service fails to start.

Apr 19 2020, 11:32 AM · VyOS 1.3 Equuleus (1.3.0)

jjakob changed the status of T2316: DHCP-server op-mode errors, a subtask of T2322: CLI [op-mode] bugs. Root task, from Confirmed to Needs testing.

Apr 19 2020, 11:30 AM · VyOS 1.3 Equuleus (1.3.0)

jjakob changed the status of T2316: DHCP-server op-mode errors from Confirmed to Needs testing.

Apr 19 2020, 11:30 AM · VyOS 1.3 Equuleus (1.3.0)

jack9603301 added a comment to T2335: Unable to assign IPv6 from ISP.

set firewall all-ping 'enable'
set firewall broadcast-ping 'enable'
set firewall config-trap 'disable'
set firewall ipv6-receive-redirects 'enable'
set firewall ipv6-src-route 'enable'
set firewall ip-src-route 'enable'
set firewall log-martians 'enable'
set firewall name wan default-action 'drop'
set firewall name wan rule 1 action 'accept'
set firewall name wan rule 1 state established 'enable'
set firewall name wan rule 1 state related 'enable'
set firewall name wan-local default-action 'drop'
set firewall name wan-local rule 1 action 'accept'
set firewall name wan-local rule 1 state established 'enable'
set firewall name wan-local rule 1 state related 'enable'
set firewall name wan-local rule 2 action 'accept'
set firewall name wan-local rule 2 icmp type-name 'echo-request'
set firewall name wan-local rule 2 protocol 'icmp'
set firewall name wan-local rule 2 state new 'enable'
set firewall name wan-local rule 3 action 'drop'
set firewall name wan-local rule 3 destination port '22'
set firewall name wan-local rule 3 protocol 'tcp'
set firewall name wan-local rule 3 recent count '4'
set firewall name wan-local rule 3 recent time '60'
set firewall name wan-local rule 3 state new 'enable'
set firewall name wan-local rule 4 action 'accept'
set firewall name wan-local rule 4 protocol 'tcp'
set firewall name wan-local rule 4 state new 'enable'
set firewall options interface pppoe0 adjust-mss '1452'
set firewall options interface pppoe0 adjust-mss6 '1280'
set firewall receive-redirects 'disable'
set firewall send-redirects 'enable'
set firewall source-validation 'disable'
set firewall state-policy established action 'accept'
set firewall state-policy established log enable
set firewall state-policy invalid action 'accept'
set firewall state-policy invalid log enable
set firewall state-policy related action 'accept'
set firewall state-policy related log enable
set firewall syn-cookies 'enable'
set firewall twa-hazards-protection 'disable'
set interfaces bridge br1 address '192.168.0.1/24'
set interfaces bridge br1 address 'fc00:470:f1cd::1/64'
set interfaces bridge br1 description 'lan 0'
set interfaces bridge br1 dhcpv6-options temporary
set interfaces bridge br1 ipv6 address autoconf
set interfaces bridge br1 ipv6 address eui64 'fc00:470:f1cd::/64'
set interfaces bridge br1 ipv6 dup-addr-detect-transmits '1'
set interfaces bridge br1 member interface eth1.1
set interfaces bridge br1 member interface eth2
set interfaces bridge br1 stp
set interfaces bridge br2 address '192.168.101.1/24'
set interfaces bridge br2 address 'fc00:470:f1cd:101::1/64'
set interfaces bridge br2 description 'lan 101'
set interfaces bridge br2 dhcpv6-options temporary
set interfaces bridge br2 ipv6 address autoconf
set interfaces bridge br2 ipv6 address eui64 'fc00:470:f1cd:101::/64'
set interfaces bridge br2 ipv6 dup-addr-detect-transmits '1'
set interfaces bridge br2 member interface eth0
set interfaces bridge br2 member interface eth1.2
set interfaces bridge br2 member interface eth3
set interfaces bridge br2 member interface eth4
set interfaces bridge br2 stp
set interfaces ethernet eth0 description 'LAN'
set interfaces ethernet eth0 ipv6 address
set interfaces ethernet eth0 ipv6 dup-addr-detect-transmits '1'
set interfaces ethernet eth1 description 'Trunk'
set interfaces ethernet eth1 vif 1 description 'vlan 1 of eth1'
set interfaces ethernet eth1 vif 2 description 'vlan 2 of eth1'
set interfaces ethernet eth2 description 'LAN'
set interfaces ethernet eth3 description 'LAN'
set interfaces ethernet eth4 description 'LAN'
set interfaces ethernet eth5 description 'WAN'
set interfaces ethernet eth5 disable-flow-control
set interfaces ethernet eth5 firewall in name 'wan'
set interfaces ethernet eth5 firewall local name 'wan-local'
set interfaces pppoe pppoe0 authentication password 'password'
set interfaces pppoe pppoe0 authentication user 'username'
set interfaces pppoe pppoe0 default-route 'auto'
set interfaces pppoe pppoe0 description 'ISP'
set interfaces pppoe pppoe0 ipv6 enable
set interfaces pppoe pppoe0 mtu '1492'
set interfaces pppoe pppoe0 source-interface 'eth5'
set nat nptv6 rule 2 description 'IPv6 NPT'
set nat nptv6 rule 2 outbound-interface 'pppoe0'
set nat nptv6 rule 2 source prefix 'fc00:470:f1cd::/48'
set nat nptv6 rule 2 translation prefix '240e:fc:7d:dc27::/64'
set nat source rule 1 description 'PUBLIC'
set nat source rule 1 log 'enable'
set nat source rule 1 outbound-interface 'pppoe0'
set nat source rule 1 protocol 'all'
set nat source rule 1 source address '0.0.0.0/0'
set nat source rule 1 translation address 'masquerade'
set protocols static interface-route 0.0.0.0/0 next-hop-interface pppoe0
set protocols static interface-route6 ::/0 next-hop-interface pppoe0
set protocols static table 150 interface-route 0.0.0.0/0 next-hop-interface pppoe0
set protocols static table 150 interface-route6 ::/0 next-hop-interface pppoe0
set service dhcp-server shared-network-name pri101 description 'DHCP 101'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 default-router '192.168.101.1'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.0.254'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.101.1'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 dns-server '192.168.0.1'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 lease '86400'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 ntp-server '192.168.101.1'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 range 0 start '192.168.101.8'
set service dhcp-server shared-network-name pri101 subnet 192.168.101.0/24 range 0 stop '192.168.101.254'
set service dhcpv6-server preference '0'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 address-range start fc00:470:f1cd:101::8 stop 'fc00:470:f1cd:101:ffff:ffff:ffff:ffff'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::ff00'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::1'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd:101::1'
set service dns forwarding allow-from '192.168.0.0/16'
set service dns forwarding allow-from '2001:470:f1cd::/48'
set service dns forwarding cache-size '1024'
set service dns forwarding domain pve. server '192.168.0.47'
set service dns forwarding domain pve. server '2001:470:f1cd::47'
set service dns forwarding listen-address '0.0.0.0'
set service dns forwarding listen-address '::'
set service dns forwarding name-server '114.114.114.114'
set service dns forwarding name-server '1.1.1.1'
set service dns forwarding name-server '1.0.0.1'
set service dns forwarding name-server '2001:470:f1cd::ff00'
set service dns forwarding name-server '192.168.0.254'
set service dns forwarding system
set service https virtual-host vhost0 listen-address '*'
set service https virtual-host vhost0 server-name '192.168.0.1'
set service mdns repeater interface 'br1'
set service mdns repeater interface 'br2'
set service router-advert interface br1
set service router-advert interface br2
set service ssh listen-address '0.0.0.0'
set system acceleration
set system config-management commit-revisions '100'
set system console device ttyS0 speed '115200'
...skipping...
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::ff00'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd::1'
set service dhcpv6-server shared-network-name pri101 subnet fc00:470:f1cd:101::/64 name-server 'fc00:470:f1cd:101::1'
set service dns forwarding allow-from '192.168.0.0/16'
set service dns forwarding allow-from '2001:470:f1cd::/48'
set service dns forwarding cache-size '1024'
set service dns forwarding domain pve. server '192.168.0.47'
set service dns forwarding domain pve. server '2001:470:f1cd::47'
set service dns forwarding listen-address '0.0.0.0'
set service dns forwarding listen-address '::'
set service dns forwarding name-server '114.114.114.114'
set service dns forwarding name-server '1.1.1.1'
set service dns forwarding name-server '1.0.0.1'
set service dns forwarding name-server '2001:470:f1cd::ff00'
set service dns forwarding name-server '192.168.0.254'
set service dns forwarding system
set service https virtual-host vhost0 listen-address '*'
set service https virtual-host vhost0 server-name '192.168.0.1'
set service mdns repeater interface 'br1'
set service mdns repeater interface 'br2'
set service router-advert interface br1
set service router-advert interface br2
set service ssh listen-address '0.0.0.0'
set system acceleration
set system config-management commit-revisions '100'
set system console device ttyS0 speed '115200'
set system domain-name 'router'
set system host-name 'vyos'
set system ip arp table-size '2048'
set system ip multipath layer4-hashing
set system ipv6 multipath layer4-hashing
set system ipv6 neighbor table-size '2048'
set system ipv6 strict-dad
set system login user vyos authentication encrypted-password '$6$UaXQViDvJ.Hr$85U/9Q5d/tc9hdtrnntMVgrztOCext..OJCHaJYZUo82GAdD95lchvSjI3vCZJTNte7cIAs87YctYlXODGXAz1'
set system login user vyos authentication plaintext-password ''
set system name-server '192.168.0.1'
set system ntp allow-clients address '192.168.0.0/16'
set system ntp allow-clients address 'fc00:470:f1cd::/48'
set system ntp listen-address '::'
set system ntp listen-address '0.0.0.0'
set system ntp server 0.centos.pool.ntp.org
set system ntp server 1.centos.pool.ntp.org
set system ntp server 2.centos.pool.ntp.org
set system ntp server 3.centos.pool.ntp.org
set system ntp server ntp.qhjack.cn
set system sysctl custom net.ipv4.conf.all.rp_filter value '0'
set system sysctl custom net.ipv4.conf.default.rp_filter value '0'
set system sysctl custom net.ipv4.conf.eth0.rp_filter value '0'
set system sysctl custom net.ipv6.conf.all.accept_ra value '2'
set system sysctl custom net.ipv6.conf.all.forwarding value '1'
set system syslog global facility all level 'info'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'

Apr 19 2020, 11:29 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2335: Unable to assign IPv6 from ISP.

Can you please post the configuration as show configuration commands from op-mode level? Then it will become easier to reproduce it. Thanks

Apr 19 2020, 11:05 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX5cbba3a13868: bridge: T2232: bugfix - remove double colon (:).

Apr 19 2020, 10:22 AM

jack9603301 added a comment to T2335: Unable to assign IPv6 from ISP.

The configuration is as follows:

Apr 19 2020, 10:06 AM · VyOS 1.3 Equuleus (1.3.0)

c-po reassigned T2232: Prevent deletion of bridge member interfaces from c-po to thomas-mangin.

Apr 19 2020, 10:03 AM · Restricted Project, VyOS 1.5 Circinus

c-po added a comment to T2335: Unable to assign IPv6 from ISP.

Please share your configuration and where you expect an IPv6 address to pop up

Apr 19 2020, 9:59 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX0e19d622a041: bridge: T2232: move helper to vyos.validate.

Apr 19 2020, 9:55 AM

c-po committed rVYOSONEX0588c120b8c2: {pppoe,ipoe}-server: T2324: T2314: migrate to common accel-name-server XML.

Apr 19 2020, 8:51 AM

c-po closed T2185: Start daemons with systemd units instead of with start-stop-daemon as Resolved.

Apr 19 2020, 8:50 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX84f20f1d5e09: ipoe-server: T2324: bugfix name-server migration.

Apr 19 2020, 8:43 AM

c-po committed rVYOSONEX3bd64cad570f: ipoe-server: T2324: bugfix template generation on interface line.

Apr 19 2020, 8:41 AM

jack9603301 edited a custom field on T2335: Unable to assign IPv6 from ISP.

Apr 19 2020, 8:36 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEXbf3ba1cba4c9: ipoe-server: T2324: use common accel-radius-additions XML file.

Apr 19 2020, 8:36 AM

c-po committed rVYOSONEX75a382ae75e3: {pppoe,ipoe}-server: T2324: T2314: migrate CoA server.

Apr 19 2020, 8:36 AM

c-po committed rVYOSONEXb2af248ff2c6: pppoe-server: T2314: add common accel-radius-additions XML file.

Apr 19 2020, 8:36 AM

jack9603301 updated the task description for T2335: Unable to assign IPv6 from ISP.

Apr 19 2020, 8:34 AM · VyOS 1.3 Equuleus (1.3.0)

jack9603301 created T2335: Unable to assign IPv6 from ISP.

Apr 19 2020, 8:32 AM · VyOS 1.3 Equuleus (1.3.0)

Apr 18 2020

alainlamar closed T2210: vyos-1x: WiFi interfaces as bridge slaves, hostapd config items missing as Invalid.

The hostapd.conf says that this might not be needed anymore.

Apr 18 2020, 9:49 PM · VyOS 1.3 Equuleus (1.3.0)

alainlamar closed T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis as Resolved.

Apr 18 2020, 8:55 PM · VyOS 1.3 Equuleus (1.3.0)

alainlamar added a comment to T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.

Thought about some quirks. Did not touch the reset button yet but had in mind to use it as some ACPI power button to enable cold boot by pressing a button, not unplugging and replugging odd wires. Resetting the config by that button would be a waste of that button. You would have to hook up to the APU board by serial again in order to revive it. If you did so, you might as well just have moved away the bad config and reboot :-) Once I get a hang of how that reset button works (gotta look into the GPIO stuff), I'll open a new ticket. Maybe we can add some generic config wizzardry to set up LEDs and GPIOs once we get a good grasp on it.

Apr 18 2020, 8:55 PM · VyOS 1.3 Equuleus (1.3.0)

alainlamar closed T2306: Add new cipher suites to the WiFi configuration as Resolved.

Apr 18 2020, 8:45 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEXc08ea8340ec5: {pppoe,ipoe}-server: rename RADIUS key.

Apr 18 2020, 8:39 PM

c-po committed rVYOSONEX6da4b1013978: ipoe-server: T2324: move template files to common accel-ppp template directory.

Apr 18 2020, 7:49 PM

c-po committed rVYOSONEXefa172449e05: ipoe-server: T2324: migrate IPv6 client IP pool to common CLI nodes.

Apr 18 2020, 7:46 PM

c-po closed T2324: Cleanup IPoE server implementation and CLI commands as Resolved.

Apr 18 2020, 7:46 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2110: RADIUS: supply include file for radius config to have a uniform CLI as Resolved.