Query: All Stories

	Include stories about projects I am a member of.

thanks for pushing and testing this featureset. Your requested changes will make it into the rolling image the next couple of days!

I haven't tested it directly but I haven't experienced this problem while working on the configuration changes. I don't have much time right now, so I can't test the exact scenario.

Not reproducible, tested on "1.3-beta-202108151336"

@Viacheslav Sorry for the long delay in replying.

Bug, values on interfaces are overwritten after firewall global parameters.

By default:

vyos@r4-1.3# sudo sysctl -a | grep "\.rp_filter"
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth1.rp_filter = 0
net.ipv4.conf.eth2.rp_filter = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.vtun10.rp_filter = 0

Set value for the interface eth2 value "loose"

vyos@r4-1.3# set interfaces ethernet eth2 ip source-validation 'loose'
[edit]
vyos@r4-1.3# commit
vyos@r4-1.3# sudo sysctl -a | grep "\.rp_filter"
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth1.rp_filter = 0
net.ipv4.conf.eth2.rp_filter = 2
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.vtun10.rp_filter = 0

@Merijn Any updates?

@c-po Can we close it?

Not more actual for 1.3, as it used isc-dhcp-client/isc-dhcp-relay/isc-dhcp-server 4.4.1-2
I can't find in logs something like bad udp checksums

VyOS 1.3.0-rc6 (upcoming) and 1.4 have the following commands available:

Do we need to set this option configurable?
We have an option --disable-syslog so for enable logging it should be --enable-syslog

SA only with hub, output correct

vyos@spoke1:~$ show vpn ipsec sa
Connection    State    Uptime    Bytes In/Out    Packets In/Out    Remote address    Remote ID    Proposal
------------  -------  --------  --------------  ----------------  ----------------  -----------  ----------------------------------
dmvpn         up       16m24s    2K/2K           24/23             192.0.2.1         N/A          AES_CBC_256/HMAC_SHA1_96/MODP_1024
vyos@spoke1:~$ 
vyos@spoke1:~$ 
vyos@spoke1:~$ sudo swanctl -l
dmvpn-NHRPVPN-tun100: #1, ESTABLISHED, IKEv1, 2bc867b1ca327379_i* c85b15462b657b03_r
  local  '100.64.1.11' @ 100.64.1.11[500]
  remote '192.0.2.1' @ 192.0.2.1[500]
  AES_CBC-256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024
  established 1001s ago, rekeying in 2400s
  dmvpn: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_CBC-256/HMAC_SHA1_96/MODP_1024
    installed 1001s ago, rekeying in 505s, expires in 979s
    in  cb2b55ee,   3044 bytes,    24 packets,    91s ago
    out cb3647d6,   2474 bytes,    23 packets,    91s ago
    local  100.64.1.11/32[gre]
    remote 192.0.2.1/32[gre]
vyos@spoke1:~$

Tested on VyOS 1.3.0-rc5

Not reproducible update from 1.2.4 to 1.3-rc5
1.2.4 config

set interfaces ethernet eth1 bond-group bond0
set interfaces ethernet eth1 bond-group bond0
set interfaces bonding bond0 vif 29 address '192.168.159.167/31'
set interfaces bonding bond0 vif 29 address 'fd12:45:fff:29::2/126'
set interfaces bonding bond0 vif 29 description 'Point to Point - DMZ'
set interfaces bonding bond0 vif 29 ip ospf dead-interval '20'
set interfaces bonding bond0 vif 29 ip ospf hello-interval '10'
set interfaces bonding bond0 vif 29 ip ospf priority '220'
set interfaces bonding bond0 vif 29 ip ospf retransmit-interval '5'
set interfaces bonding bond0 vif 29 ip ospf transmit-delay '1'
set interfaces bonding bond0 vif 29 ipv6 dup-addr-detect-transmits '1'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 cost '1'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 dead-interval '20'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 hello-interval '10'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 instance-id '0'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 priority '220'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 retransmit-interval '5'
set interfaces bonding bond0 vif 29 ipv6 ospfv3 transmit-delay '1'
set interfaces bonding bond0 vif 29 mtu '1500'
set interfaces loopback lo address 'fd12:45::14/128'
set policy route-map OSPF-Filter description 'This route map will apply to outgoing routes sent via OSPF'
set policy route-map OSPF-Filter rule 10 action 'permit'
set policy route-map OSPF-Filter rule 10 description 'Only permit loopback interface'
set policy route-map OSPF-Filter rule 10 match interface 'lo'
set policy route-map OSPF-Filter rule 100 action 'deny'
set policy route-map OSPF-Filter rule 100 description 'Default deny'
set protocols ospfv3 area 0.0.0.0 interface 'lo'
set protocols ospfv3 area 0.0.0.0 interface 'bond0.29'
set protocols ospfv3 area 0.0.0.0 range fd12:45:fff:29::/126
set protocols ospfv3 parameters router-id '192.168.159.241'
set protocols ospfv3 redistribute connected route-map 'OSPF-Filter'

Large-community and large-community-list it is different functions.
It seems all works fine

@darkdragon-001 It will be available in the next rolling release, can you test it?

Might be good to have a workaround in VyOS in the mean time

Thank's for opening an upstream bug

Thank you for testing! The change was backported to 1.3 and 1.2.

Fixed, 1.3-beta-202108151336

vyos@r4-1.3# run show conf com | match openvpn
set interfaces openvpn vtun10 encryption cipher 'aes256'
set interfaces openvpn vtun10 hash 'sha512'
set interfaces openvpn vtun10 local-host '192.168.122.14'
set interfaces openvpn vtun10 local-port '1194'
set interfaces openvpn vtun10 mode 'server'
set interfaces openvpn vtun10 persistent-tunnel
set interfaces openvpn vtun10 protocol 'udp'
set interfaces openvpn vtun10 server client client1 ip '10.10.0.10'
set interfaces openvpn vtun10 server domain-name 'vyos.net'
set interfaces openvpn vtun10 server max-connections '250'
set interfaces openvpn vtun10 server name-server '172.16.254.30'
set interfaces openvpn vtun10 server subnet '10.10.0.0/24'
set interfaces openvpn vtun10 server topology 'subnet'
set interfaces openvpn vtun10 tls ca-cert-file '/config/auth/ca.crt'
set interfaces openvpn vtun10 tls cert-file '/config/auth/central.crt'
set interfaces openvpn vtun10 tls dh-file '/config/auth/dh.pem'
set interfaces openvpn vtun10 tls key-file '/config/auth/central.key'
set interfaces openvpn vtun10 tls tls-version-min '1.0'
set interfaces openvpn vtun10 use-lzo-compression
[edit]
vyos@r4-1.3#
vyos@r4-1.3# set interfaces openvpn vtun10 authentication username foo
[edit]
vyos@r4-1.3# commit

Not sure that it is a good idea for this format.
The syntax between versions (1.3/1.4 bgd/isisd) is changed. With every syntax change you should also change and section "service https API ... bgp"
My point API must have a full access to all configuration options.

I have just opened a GitHub issue for this at FRR as well: https://github.com/FRRouting/frr/issues/9405

Just checked, the behaviour for this bug is still the same.

All Stories
Use Results
Edit Query
Hide Query

Aug 18 2021

Aug 17 2021

Aug 16 2021

Aug 15 2021

All StoriesUse ResultsEdit QueryHide Query

Aug 18 2021

Aug 17 2021

Aug 16 2021

Aug 15 2021

All Stories
Use Results
Edit Query
Hide Query