PR https://github.com/vyos/vyos-1x/pull/589

Not had a lot of time recently, but I have kind of been waiting for the configuration nodes to be ported to Python, so that this can be written in the new / modern way.

Another willing to test.

We need some expressions like

I see correct state "disabled"

Hi guys, I decided to revive this thread because it seems better than to create a new one, the subject seems to be the same. Im running a Vyos in a R420 with 16gb of ram (no errors in my tests while preparing the machine for the Vyos) and 2 processors, and after some 30 days running flawlessly, it started failing partially. It started working fine again after a reboot. After some 5-7 days the same problem reoccurred. At the first time I managed to see some errors in its screens and they said basically:

which exact VyOS version are you using? Delegating from one interface to many should be doable and can be configured on the latest rolling version.

Closing in favor of T2994 - please try tomorrows rolling release. If there are new bugs (which might always happen on rewrites) please file a new Bug report and I try to fix them ASAP.

In T1289#78883, @Viacheslav wrote:

Like this?

vyos@r4-roll# set policy route-map FJFFJJF rule 10 set ip-next-hop 
Possible completions:
   <x.x.x.x>    IP address

where x.x.x.x route to blackhole?

Like this?

In T1289#35636, @dmbaturin wrote:

The usual procedure is to create a route-map that sets the nexthop to a blackholed address if the advertisment has a specific community string set.
So when a customer advertises an address (rather a /32 network) to you with that string set, it automatically ends up blackholed.

Do you just want a shortcut for that, or you are having issues with community string-based approach?

This logic does not allow for the complete removal of the protocol.
https://github.com/vyos/vyatta-cfg-quagga/blob/32cbb1e5059c6c27449b7013f790aff1c50a9831/templates/protocols/ospf/passive-interface/node.def#L29-L35

@Azayaka do you mean import routes to a specific table? T3032
Can you check it with the next rolling release?

@rizkidtn Update, please your request. Is the community works for you for blackholing?

I found some interesting information, it seems that inbound/outbound port mirroring can be achieved

PR https://github.com/vyos/vyos-1x/pull/588

PR https://github.com/vyos/vyatta-cfg-quagga/pull/56

Can you please share the entire configuration and version of the VyOS to reproduce the issue in the lab.

set interfaces ethernet eth1 ipv6 address no-default-link-local is the right command, yes

Bug ;) will be fixed soon

Yes, but iptables tee seems to support packet copy of various rules

Do you mean that?

set interfaces ethernet eth1 mirror

1. Not all interfaces can be used as "update-source"

Missed "vti | dum | lo" etc.
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/protocols-bgp.xml.in#L639

PR https://github.com/vyos/vyos-1x/pull/587
Fix the FRR template for new bgp implementation.

Pull request is up: https://github.com/vyos/vyos-1x/pull/586

How to do it?

You actually can when setting ipv6 disable-link-local addressing on the particular interface.