@danhusan that PR was only done to current and not backported. I just packported it to the crux branch.

Sorry for the late reply, I've dismantled the setup as I needed to put the PPP link back in use, I will look into it again tonight. In essence, it would be good to see something like this on terse view:

sudo journalctl -b

lspci -knn

The reason these validations https://github.com/vyos/vyos-1x/blob/aca3254d96d01cc37c9e15e02e500a36f3708959/interface-definitions/vrrp.xml#L220-L224
There is no such problem in version 1.4.

@Viacheslav 1.2.7.

@c-po I expected this to go into 1.2.7 but it did not. How would I tag this properly so it hopefully makes it into 1.2.8?

This can be close. The commit is working again after upgrading to the latest rolling

Submitted following PR:

@dtoux could you provide us with a mocked up output what you would like to see?

frr-reload output: 184 % Cannot have local-as same as BGP AS number

@olofl which version?

PR https://github.com/vyos/vyos-1x/pull/801
And related
PR https://github.com/vyos/vyos-build/pull/156
PR https://github.com/vyos/vyatta-cfg/pull/35

This issue seems to have gone away or I haven't noticed it recently.

I cannot reproduce this on VyOS 1.4-rolling-202104062128. Instead, on that version, ipv6 address autoconf commits, but the interface never picks up a v6 address.

Works! Thanks!

Add PR with improvements to documentation https://github.com/vyos/vyos-documentation/pull/503

Thanks. I think the main issue is missing required modules in the generated pppoe server config file

 sudo cat /run/accel-pppd/pppoe.conf 
### generated by accel_pppoe.py ###
[modules]
log_syslog
pppoe
shaper
chap-secrets
ippool
auth_pap
auth_chap_md5
auth_mschap_v1
auth_mschap_v2

Required

ipv6pool
ipv6_nd
ipv6_dhcp

These option enables by the foloowing CLI command::

set service pppoe-server ppp-options ipv6 allow

Even when setting above command I have no IPv6 address assigned.

It looks like the same nature of this issue https://phabricator.vyos.net/T3393
@c-po , could you try to test fast solution

configure
set system sysctl custom net.ipv6.conf.default.addr_gen_mode value 0
commit

https://github.com/vyos/vyos-1x/pull/800

Looks like that is actually working.

Oops, I did not see that. Thanks.

I modified bgp.frr.tmpl, but systemctl restart vyos-configd did not seem to do anything. Rebooting the router produces the correct config:

@linuxludo thanks for the heads-up - should be fixed in the next bugfix version of 5.10 then which I regularely update VyOS to. See T3318

We probably should move the following statement https://github.com/vyos/vyos-1x/blob/current/data/templates/frr/bgp.frr.tmpl#L362-L364

Just for your information.
The patch was added to kernel 5.4, 5.10 and 5.11.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/