- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed Search
Thu, Nov 6
Thu, Nov 6
Wed, Nov 5
Wed, Nov 5
c-po changed the status of T7305: Container network loses VRF on container restart from Confirmed to In progress.
c-po renamed T7305: Container network loses VRF on container restart from Container network loses VRF on container restart to Container network looses VRF on container restart.
natali-rs1985 moved T7789: VPP fails to load XDP on GCP with gve driver from Need Triage to Completed on the VyOS Rolling board.
natali-rs1985 moved T7949: Support children of bond interfaces in VPP NAT from Need Triage to Completed on the VyOS Rolling board.
Nov 4 2025
Nov 4 2025
jestabro renamed T7991: Fix regex in constraints interface-name.xml.i, interface-name-with-wildcard.xml.i from Fix regex in constriants interface-name.xml.i, interface-name-with-wildcard.xml.i to Fix regex in constraints interface-name.xml.i, interface-name-with-wildcard.xml.i.
c-po moved T7305: Container network loses VRF on container restart from Need Triage to Completed on the VyOS Rolling board.
c-po changed the status of T7990: veth: removing virtual-ethernet pairs will purge the peer interface form the kernel from Open to In progress.
c-po moved T7976: pki: calls to node_changed_presence() must use unmangled config paths. from Need Triage to Completed on the VyOS Rolling board.
Nov 3 2025
Nov 3 2025
Nov 2 2025
Nov 2 2025
c-po added a comment to T7976: pki: calls to node_changed_presence() must use unmangled config paths..
Nov 1 2025
Nov 1 2025
c-po moved T7953: certbot: streamline implementation to avoid bugs due to duplicated code from Backlog to Finished on the VyOS 1.4 Sagitta (1.4.4) board.
c-po edited projects for T7953: certbot: streamline implementation to avoid bugs due to duplicated code, added: VyOS 1.5 Circinus (1.5-stream-2025-Q4); removed VyOS 1.5 Circinus (1.5-stream-2025-Q3).
Oct 31 2025
Oct 31 2025
ruffy91 renamed T7928: load-balancing haproxy not taking into account listen-address when checking for other services on port from Cannot reuse port for haproxy that is used as container port to load-balancing haproxy not taking into account listen-address when checking for other services on port.
Oct 30 2025
Oct 30 2025
c-po renamed T7973: VyOS does not accept IPv6 interface addresses with an all-zero host part from Vyos does not accept IP ending in :: on ethernet interfaces to VyOS does not accept IPv6 all-zero interface addresses with prefix length of /64.
c-po added a comment to T7973: VyOS does not accept IPv6 interface addresses with an all-zero host part.
cpo@LR1.wue3# set interfaces dummy dum4444 address 2001:db8::/64 Error: 2001:db8::/64 is not a valid IP host
c-po changed the status of T7973: VyOS does not accept IPv6 interface addresses with an all-zero host part from Open to Confirmed.
Oct 29 2025
Oct 29 2025
natali-rs1985 moved T7690: VPP add new interface to sFlow fails from Need Triage to Completed on the VyOS Rolling board.
c-po moved T7896: Add option to select FRR profile from Need Triage to Completed on the VyOS Rolling board.
c-po added a project to T7896: Add option to select FRR profile: VyOS 1.5 Circinus (1.5-stream-2025-Q4).
Oct 28 2025
Oct 28 2025
Viacheslav changed the status of T7849: Impossible to add dynamic interfaces to the firewall zone from Open to In progress.
Oct 23 2025
Oct 23 2025
Fix is in this PR https://github.com/vyos/vyos-1x/pull/4808
Fix is in this PR https://github.com/vyos/vyos-1x/pull/4808
Oct 22 2025
Oct 22 2025
natali-rs1985 moved T7930: VPP: Changing NAT44 Settings Resets `forwarding_enabled` to False from Need Triage to Completed on the VyOS Rolling board.
c-po moved T7927: Default DHCP route under VRF is deleted on commit that reloads FRR from Need Triage to Completed on the VyOS Rolling board.
c-po moved T7948: Smoketests: setUp() and tearDown() base class functions are not always called from Need Triage to Completed on the VyOS Rolling board.
Oct 21 2025
Oct 21 2025
PR was now merged. Please also backport to 1.4. Thanks!
natali-rs1985 changed the status of T7949: Support children of bond interfaces in VPP NAT from Open to In progress.
Oct 20 2025
Oct 20 2025
c-po changed the status of T7948: Smoketests: setUp() and tearDown() base class functions are not always called from Open to In progress.
c-po moved T7942: Consistent naming of "memory" in op-mode from Backlog to Finished on the VyOS 1.4 Sagitta (1.4.4) board.
c-po moved T7942: Consistent naming of "memory" in op-mode from Need Triage to Completed on the VyOS Rolling board.
jestabro updated the task description for T7946: Log redirected stdout from FRRender under vyos-configd.
Restricted Repository Identity closed T7941: vrf: dhcp does not work when VRF name contains a hyphen as Resolved by committing Restricted Diffusion Commit.
Restricted Repository Identity closed T7941: vrf: dhcp does not work when VRF name contains a hyphen, a subtask of T7927: Default DHCP route under VRF is deleted on commit that reloads FRR, as Resolved.
Oct 18 2025
Oct 18 2025
Oct 17 2025
Oct 17 2025
c-po renamed T7942: Consistent naming of "memory" in op-mode from Consitent naming of "memory" in op-mode to Consistent naming of "memory" in op-mode.
c-po changed the status of T7942: Consistent naming of "memory" in op-mode from Open to In progress.
c-po changed the status of T7941: vrf: dhcp does not work when VRF name contains a hyphen from Open to In progress.
c-po changed the status of T7941: vrf: dhcp does not work when VRF name contains a hyphen, a subtask of T7927: Default DHCP route under VRF is deleted on commit that reloads FRR, from Open to In progress.
c-po moved T7908: certbot: renewal ineffective due to wrong config location from Backlog to Finished on the VyOS 1.4 Sagitta (1.4.4) board.
c-po moved T7908: certbot: renewal ineffective due to wrong config location from Need Triage to Completed on the VyOS Rolling board.
c-po moved T7657: Op-mode command show system memory cache does not work from Need Triage to Completed on the VyOS Rolling board.
c-po changed the status of T7657: Op-mode command show system memory cache does not work from Open to In progress.
Oct 16 2025
Oct 16 2025
In PR changed interface to
Oct 15 2025
Oct 15 2025
natali-rs1985 changed the status of T7690: VPP add new interface to sFlow fails from Open to In progress.
natali-rs1985 changed the status of T7691: VPP delete sFlow configuration does not work from Open to In progress.
Oct 14 2025
Oct 14 2025
natali-rs1985 changed the status of T7929: VPP: Too Strict Validation for NAT44 Static Rules from Open to In progress.
natali-rs1985 changed the status of T7930: VPP: Changing NAT44 Settings Resets `forwarding_enabled` to False from Open to In progress.
natali-rs1985 triaged T7930: VPP: Changing NAT44 Settings Resets `forwarding_enabled` to False as Normal priority.
Oct 13 2025
Oct 13 2025
martb@rauter# set interfaces pppoe pppoe0 address 'dhcpv6' [edit] martb@rauter# comp [interfaces pppoe pppoe0] + address "dhcpv6"
Something seems to trigger the next elif branch in interface.py L1284.
Your bug report suggest a malformed string in your set command.
Could you test with a quoted param?
Yes I've tested with the latest nightly, the config node didn't exist before.
vyos@vyos# show interfaces pppoe pppoe0 | strip-private
+address dhcpv6
authentication {
password xxxxxx
username xxxxxx
}
dhcpv6-options {
duid xx:xx:xx:xx:xx:12:xx:xx:xx:xx:xx:b9:xx:xx:xx:xx:xx:94
pd 0 {
interface bond0.1 {
address 1
sla-id 0
}
interface bond0.1001 {
address 1
sla-id 1
}
interface bond0.1002 {
address 1
sla-id 2
}
interface bond0.1003 {
address 1
sla-id 3
}
interface bond0.2001 {
address 1
sla-id 257
}
interface eth2 {
address 1
sla-id 4
}
interface eth3 {
address 1
sla-id 10
}
length 48
}
}
ipv6 {
address {
autoconf
}
}
mtu 1500
no-peer-dns
source-interface bond0.4002
[edit]
vyos@vyos#[ interfaces pppoe pppoe0 ]
Traceback (most recent call last):
File "/usr/libexec/vyos/services/vyos-configd", line 156, in run_
script
script.apply(c)
File "/usr/libexec/vyos/conf_mode/interfaces_pppoe.py", line 132,
in apply
p.update(pppoe)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/pppoe.py", lin
e 124, in update
super().update(config)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py",
line 1831, in update
self.add_addr(addr, vrf_changed=vrf_changed)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py",
line 1286, in add_addr
elif not is_intf_addr_assigned(self.ifname, addr, netns=netns):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/utils/network.py", line
454, in is_intf_addr_assigned
if ip_interface(addr) == interface or address == addr:
^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/ipaddress.py", line 117, in ip_interfac
e
raise ValueError(f'{address!r} does not appear to be an IPv4 or
IPv6 interface')
ValueError: 'd' does not appear to be an IPv4 or IPv6 interfaceMy original pull request was using the 'dhcpv6' keyword under system interface pppoe pppoeN ipv6 address namespace.
@c-po enhanced that by matching global interface configuration by assigning the keyword to system interface pppoe pppoeN address to be more inline with general VyOS configuration.
This unfortunately doesn't work.
Why is it in the new address node when there is ipv4 address and ipv6 address already? It should be in ipv6 address where the other ipv6 addressing options are too.
Also I get the following error when trying to set it:
script
script.apply(c)
File "/usr/libexec/vyos/conf_mode/interfaces_pppoe.py", line 132,
in apply
p.update(pppoe)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/pppoe.py", lin
e 124, in update
super().update(config)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py",
line 1831, in update
self.add_addr(addr, vrf_changed=vrf_changed)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py",
line 1286, in add_addr
elif not is_intf_addr_assigned(self.ifname, addr, netns=netns):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/utils/network.py", line
454, in is_intf_addr_assigned
if ip_interface(addr) == interface or address == addr:
^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/ipaddress.py", line 117, in ip_interfac
e
raise ValueError(f'{address!r} does not appear to be an IPv4 or
IPv6 interface')
ValueError: 'd' does not appear to be an IPv4 or IPv6 interfaceUnfortunately I am not aware of such plans currently.
Oct 12 2025
Oct 12 2025
sarthurdev changed the status of T7882: dhcp6c fails to restart after interface down & up when using only PD from Open to Needs testing.
sarthurdev changed the status of T7925: Improve dhcpv6 prefix verification, add fallback check of Kea config from In progress to Needs testing.
c-po moved T7919: Removing PPPoE interface in smoketests and throw a PermissionError from Backlog to Finished on the VyOS 1.4 Sagitta (1.4.4) board.
Oct 10 2025
Oct 10 2025
Please use: set interfaces pppoe pppoe0 address dhcpv6 to enable IA_NA
c-po moved T7485: DHCPv6 does not work on PPPoE interfaces from Need Triage to Completed on the VyOS Rolling board.
c-po moved T7919: Removing PPPoE interface in smoketests and throw a PermissionError from Need Triage to Completed on the VyOS Rolling board.
Unknown Object (User) placed T4251: Add TLS functionality for rsyslog up for grabs.
Viacheslav renamed T7922: vpp: Add basic vpp policer configuration from vpp: Added basic vpp policer configuration to vpp: Add basic vpp policer configuration.
Viacheslav changed the status of T7922: vpp: Add basic vpp policer configuration from Open to In progress.