The following config works as expected (since nexthop dhcp was fixed in T3395):
load-balancing {
wan {
interface-health eth0 {
nexthop dhcp
test 1 {
target 8.8.8.8
type ping
}
}
interface-health eth1 {
nexthop dhcp
test 1 {
target 1.1.1.1
type ping
}
}
rule 1 {
inbound-interface br0
interface eth0 {
}
interface eth1 {
}
}
}
}Running show wan-load-balance:
Interface: eth0
Status: active
Last Status Change: Tue May 10 11:04:42 2022
+Test: ping Target: 8.8.8.8
Last Interface Success: 0s
Last Interface Failure: 1h21m14s
# Interface Failure(s): 0
Interface: eth1
Status: failed
Last Status Change: Tue May 10 11:05:29 2022
-Test: ping Target: 1.1.1.1
Last Interface Success: n/a
Last Interface Failure: 0s
# Interface Failure(s): 1986But if additional tests are performed to the same address into the health check of every interface, it will fail for all interfaces when one interface fails its checks:
load-balancing {
wan {
interface-health eth0 {
nexthop dhcp
test 1 {
target 8.8.8.8
type ping
}
}
interface-health eth1 {
nexthop dhcp
test 1 {
target 8.8.8.8
type ping
}
}
rule 1 {
inbound-interface br0
interface eth0 {
}
interface eth1 {
}
}
}
}Interface: eth0
Status: failed
Last Status Change: Tue May 10 17:15:59 2022
-Test: ping Target: 8.8.8.8
Last Interface Success: n/a
Last Interface Failure: 0s
# Interface Failure(s): 5
Interface: eth1
Status: failed
Last Status Change: Tue May 10 17:15:59 2022
-Test: ping Target: 8.8.8.8
Last Interface Success: n/a
Last Interface Failure: 0s
# Interface Failure(s): 5This bug can be reproduced in 1.3.0-rc6, 1.3-rolling-202205100648 and in 1.4-rolling-202205080844.
Version: VyOS 1.3.0-rc6 Release Train: equuleus Built by: Sentrium S.L. Built on: Sun 22 Aug 2021 15:37 UTC Build UUID: 965518de-857d-4e61-ab09-381aadf24eb1 Build Commit ID: 75b37b28b2e9ab Architecture: x86_64 Boot via: installed image System type: bare metal Hardware vendor: Supermicro Hardware model: X10SLH-N6-ST031 Hardware S/N: 0123456789 Hardware UUID: Unknown Copyright: VyOS maintainers and contributors