1.1.8 configuration
set system syslog host [2001:db8::2]:514 facility all level 'all'
1.1.8 configuration
set system syslog host [2001:db8::2]:514 facility all level 'all'
Try one of them options
I kill the vm 80+ times.
All works fine.
@c-po can we "cherry-pick" it to 1.3.0?
vrf detected even it not created
https://github.com/vyos/vyos-1x/blob/dd35eb76153191bc487e3ea23c3e73c753ec1d4b/src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper#L55-L59
root@r-roll01:/home/vyos# basename /sys/class/net/eth1/upper_* | sed -e 's/upper_//' eth1v1
Wrong behavior
Original task https://phabricator.vyos.net/T3377
Original task https://phabricator.vyos.net/T3377
Original task https://phabricator.vyos.net/T3377
Original task https://phabricator.vyos.net/T3377
@trystan attach please configuration with sets, how to reproduce it.
For example
set param xxx option xxx.. set param2 xxx .option xxx..
And after commit... tc error..
The same with ports.
It will be fixed after rewriting the firewall to python.
FRR doesn't have such a function.
Expected output, in VyOS 1.3.0-rc1 works fine
showvyos@vyos:~$ show int
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 - u/u WAN01-pppoe
eth1 10.0.0.1/24 u/u LAN
eth2 192.0.2.12/24 u/u WAN02-dhcp
eth3 - u/u
lo 127.0.0.1/8 u/u
::1/128
pppoe0 10.1.1.101/32 u/uUnexpected redistribution for isis VyOS 1.4-rolling-202103040218
Also, It can't check that cmd on hypervisor
@linuxludo Can you share a link?
It seems it some upstream issue
vyos@r-roll01# sudo ip tunnel add tun22 mode gre local 203.0.113.1 remote any [edit] vyos@r-roll01# sudo ip tunnel change tun22 mode gre local 203.0.113.1 remote 203.0.113.254 add tunnel "tun22" failed: Invalid argument [edit] vyos@r-roll01#
For 1.4 the same fail
Config
set interfaces tunnel tun1 address '10.20.30.1/30' set interfaces tunnel tun1 encapsulation 'gre' set interfaces tunnel tun1 source-address '192.168.122.11' set interfaces tunnel tun1 multicast 'disable' commit set interfaces tunnel tun1 remote 192.168.122.12 commit
Updated PR
I replace raw dhcpv6 global-parameters with leafNode.
@FileGo will be fixed in the next rolling release.
To reproduce, add one tunnel
I think it related T2651
It seems a bug with your configuration. It is incorrect.
It used different scripts in 1.3 and 1.4.
show interfaces => run: ${vyos_op_scripts_dir}/show_interfaces.py --action=show-brief
show interfaces vrrp => run: ${vyatta_bindir}/vyatta-show-interfaces.pl --vrrp --action=show-brief
Frr doesn't provide such option for ipv4, only for ipv6
Try to place that rule after established, for example, number 25
Duplicate T3349
Update pr
PR https://github.com/vyos/vyos-1x/pull/755
@Dmitry Can you check/review PR?
You can use <x.x.x.x>-<x.x.x.x>
Or you need "multi" addresses not in "range"? Something like
set nat destination rule 5 translation member 203.0.113.1 set nat destination rule 5 translation member 203.0.113.14 set nat destination rule 5 translation member 203.0.113.240
@craterman Thanks.
Node "protocols" in 1.4 also doesn't have a description
PR https://github.com/vyos/vyos-1x/pull/753
Additional checks for "neighbor interface" configuration.
But only vrrp works