@alexandrestein can I assume you‘re using NPTv6 on VyOS 1.2 series? If so you mind sharing an example/configuration so we can also improve our documentation?

Jun 15 2020, 5:15 PM · VyOS 1.4 Sagitta (1.4.0-epa3)

c-po added a comment to T2599: "show interfaces" does not list VIF interfaces in ascending order.

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface        IP Address                        S/L  Description
---------        ----------                        ---  -----------
dum0             172.18.254.201/32                 u/u
eth0             -                                 u/u
eth0.5           -                                 u/u
eth0.10          -                                 u/u
eth0.15          -                                 u/u
eth0.201         172.18.201.10/24                  u/u
eth0.202         2001:affe::201/64                 u/u
eth1             fd00::ffff/64                     u/u
eth2             -                                 A/D
lo               127.0.0.1/8                       u/u
                 ::1/128

Jun 15 2020, 3:29 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2599: "show interfaces" does not list VIF interfaces in ascending order as Resolved.

Jun 15 2020, 3:29 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2572: Wrong default units when defining traffic policy bandwidth.

vyos@vyos:~$ show config commands | grep traffic
set interfaces pppoe pppoe0 traffic-policy out 'QoS'
set traffic-policy shaper QoS bandwidth '50mbit'
set traffic-policy shaper QoS default bandwidth '100%'
set traffic-policy shaper QoS default queue-type 'fq-codel'
vyos@vyos:~$ tc class show dev pppoe0
vyos@vyos:~$

Jun 15 2020, 3:23 PM

c-po moved T2599: "show interfaces" does not list VIF interfaces in ascending order from Need Triage to Backlog on the VyOS 1.3 Equuleus board.

Jun 15 2020, 2:54 PM · VyOS 1.3 Equuleus (1.3.0)

c-po moved T2576: "show interfaces" does not return VTI from Need Triage to In Progress on the VyOS 1.3 Equuleus board.

Jun 15 2020, 2:54 PM · VyOS 1.3 Equuleus (1.3.0)

c-po changed the status of T2576: "show interfaces" does not return VTI from Open to Needs testing.

Jun 15 2020, 2:54 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX79bb346293e9: login: radius: T2600: fix wrongly redered pam_radius_auth.conf.

Jun 15 2020, 2:53 PM

c-po closed T2600: RADIUS system login configuration rendered wrongly as Resolved.

Jun 15 2020, 2:53 PM · VyOS 1.3 Equuleus (1.3.0)

c-po changed the status of T2600: RADIUS system login configuration rendered wrongly from Open to In progress.

Jun 15 2020, 2:31 PM · VyOS 1.3 Equuleus (1.3.0)

c-po created T2600: RADIUS system login configuration rendered wrongly.

Jun 15 2020, 2:23 PM · VyOS 1.3 Equuleus (1.3.0)

c-po renamed T2599: "show interfaces" does not list VIF interfaces in ascending order from "show interfaces" does not list VIF interfaces in natural sorted order to "show interfaces" does not list VIF interfaces in ascending order.

Jun 15 2020, 2:19 PM · VyOS 1.3 Equuleus (1.3.0)

c-po assigned T2599: "show interfaces" does not list VIF interfaces in ascending order to thomas-mangin.

Jun 15 2020, 2:18 PM · VyOS 1.3 Equuleus (1.3.0)

c-po created T2599: "show interfaces" does not list VIF interfaces in ascending order.

Jun 15 2020, 2:18 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2574: wan-load-balance snat bug and route problem.

Please also share your NAT configuration

Jun 15 2020, 7:45 AM · VyOS 1.3 Equuleus (1.3.6)

Jun 14 2020

c-po added a comment to T2596: Allow specifying source IP for 'add system image'.

Probably is can be set in a curlrc file which is populated from CLI options

Jun 14 2020, 8:52 PM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T1538: Update conntrack-sync packages to fix VRRP issues.

Jun 14 2020, 8:19 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a project to T1538: Update conntrack-sync packages to fix VRRP issues: VyOS 1.3 Equuleus.

Jun 14 2020, 8:11 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T1538: Update conntrack-sync packages to fix VRRP issues.

Jun 14 2020, 8:10 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T1415: equuleus: buster: 24-efi_packages.chroot fails to apply.

Booting on VMware ESX with EFI works as expected.

Jun 14 2020, 7:55 PM

c-po added a comment to T1415: equuleus: buster: 24-efi_packages.chroot fails to apply.

Is this still an issue? Or does it now work in EFI systems?

Jun 14 2020, 7:48 PM

c-po committed rVYOSONEX27c38bfc6925: wireless: T2354: add new validator for phy interfaces.

Jun 14 2020, 7:46 PM

c-po closed T2354: Wireless conf_mode errors, a subtask of T2353: Interface [conf_mode] errors parent task, as Resolved.

Jun 14 2020, 7:46 PM · VyOS 1.3 Equuleus (1.3.6)

c-po closed T2354: Wireless conf_mode errors as Resolved.

Jun 14 2020, 7:46 PM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2354: Wireless conf_mode errors.

Jun 14 2020, 7:01 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2594: Missing firmware for iwlwifi, a subtask of T1958: Include only firmware we actually need, as Resolved.

Jun 14 2020, 4:23 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2594: Missing firmware for iwlwifi as Resolved.

Jun 14 2020, 4:23 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2595: Update Linux Kernel to v4.19.128 as Resolved.

Jun 14 2020, 4:05 PM · VyOS 1.3 Equuleus (1.3.0)

c-po created T2595: Update Linux Kernel to v4.19.128.

Jun 14 2020, 4:05 PM · VyOS 1.3 Equuleus (1.3.0)

c-po placed T1035: SNMP BGP 32 bit AS number fail up for grabs.

Jun 14 2020, 3:36 PM · VyOS 1.4 Sagitta (1.4.0)

c-po placed T1070: SWANCTL: DMVPN: ALL peers are deleted in swan when opennhrp tries to delete ONE peer up for grabs.

Jun 14 2020, 3:36 PM · Bugs, VyOS 1.3 Equuleus (1.3.9), VyOS 1.4 Sagitta (1.4.0-GA), Restricted Project

c-po placed T2594: Missing firmware for iwlwifi up for grabs.

Jun 14 2020, 2:51 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

Okay, root cause is the extraction script which parses the Kernel source for included source/object files.

Jun 14 2020, 11:58 AM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2594: Missing firmware for iwlwifi.

Jun 14 2020, 11:42 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

@jjakob by a weird coincidence I yesterday received a Thinkpad T420s which shows the exact same error.

Jun 14 2020, 11:41 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

In T2594#67314, @jack9603301 wrote:
For driver firmware, it's just a ko file, which can then be used by setting the boot in the configuration directory to automatically load the kernel file, or by using the following command:
depmod
modprobe myko
Considering the general Linux, the path of this driver and kernel component is usually:
/lib/modules/`uname -r`/kernel/driver/mymod/

Jun 14 2020, 11:06 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

Okay, the file is correctly installed, the question is, why the firmware is not accepted by the card. So there is no bug in general of the build system.

Jun 14 2020, 11:00 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

@jjakob installing all firmware files will again bload the image. As said - root cause must be determined why that particular file did not end up in the image. The repo holds the firmware in question (https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/iwlwifi-3945-2.ucode) so I'm currently debugging why it's not shipped.

Jun 14 2020, 10:51 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T1872: Removing serial console port from ESXi VM causes flooded syslog.

Any rolling ISO generated after vyos-1.3-rolling-202006140117-amd64.iso will have the fix.

Jun 14 2020, 9:48 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2593: source NAT translation port can not be set when translation address is set to masquerade.

Any rolling ISO generated after vyos-1.3-rolling-202006140117-amd64.iso will have the fix.

Jun 14 2020, 9:48 AM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2593: source NAT translation port can not be set when translation address is set to masquerade as Resolved.

Jun 14 2020, 9:48 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX5f75ecc0e207: nat: T2593: fix for SNAT translation port when using masquerade.

Jun 14 2020, 9:47 AM

c-po added a comment to T2593: source NAT translation port can not be set when translation address is set to masquerade.

It now renders to:

Jun 14 2020, 9:46 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2593: source NAT translation port can not be set when translation address is set to masquerade.

The mentioned configuration results into this snippet on VyOS 1.2.5

Jun 14 2020, 9:37 AM · VyOS 1.3 Equuleus (1.3.0)

c-po changed the status of T2593: source NAT translation port can not be set when translation address is set to masquerade from Open to In progress.

Jun 14 2020, 9:36 AM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2594: Missing firmware for iwlwifi.

It is not recommended to install Debian firmware- packages over vyos-linux-firmware. The question is why the firmware file in question is not pulled in automatically.

Jun 14 2020, 9:34 AM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEXe85ce4276c09: console: T2569: bugfix removing entire console CLI tree.

Jun 14 2020, 9:29 AM

c-po added a comment to T1872: Removing serial console port from ESXi VM causes flooded syslog.

T2569 did an entire rewrite of the console command in XML / Pyhton. Bugfix for this problem is also tracked in that task.

Jun 14 2020, 9:29 AM · VyOS 1.3 Equuleus (1.3.0)

Jun 13 2020

c-po closed T2321: VRF support for SSH, NTP, SNMP service as Resolved.

Jun 13 2020, 9:47 PM · VyOS 1.3 Equuleus (1.3.0)

c-po closed T2321: VRF support for SSH, NTP, SNMP service, a subtask of T2579: The root task for VRF features, as Resolved.

Jun 13 2020, 9:47 PM · VyOS 1.3 Equuleus (1.3.6)

c-po committed rVYOSONEXde112874efc3: snmp: T2321: add VRF support.

Jun 13 2020, 9:46 PM

c-po updated the task description for T2321: VRF support for SSH, NTP, SNMP service.

Jun 13 2020, 9:22 PM · VyOS 1.3 Equuleus (1.3.0)

c-po changed the status of T2321: VRF support for SSH, NTP, SNMP service, a subtask of T2579: The root task for VRF features, from Open to Needs testing.

Jun 13 2020, 9:21 PM · VyOS 1.3 Equuleus (1.3.6)

c-po changed the status of T2321: VRF support for SSH, NTP, SNMP service from Open to Needs testing.

Jun 13 2020, 9:21 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX4dbc229db28c: op-mode: T2321: add "show vrf black processes" command.

Jun 13 2020, 9:19 PM

c-po committed rVYOSONEX5b1f06336b9c: ntp: T2321: add VRF support.

Jun 13 2020, 9:19 PM

c-po committed rVYOSONEX84abe1f9d224: ssh: T2321: always run "systemctl daemon-reload".

Jun 13 2020, 9:19 PM

c-po committed rVYOSONEX7b1f1fa56f7f: ntp: T2321: remove superfluous verify() step on network addresses.

Jun 13 2020, 9:19 PM

c-po committed rVYOSONEX13f9b8fab678: ntp: T2321: use list over string when working with Config().

Jun 13 2020, 9:19 PM

c-po added a comment to T2321: VRF support for SSH, NTP, SNMP service.

vyos@vyos:~$ show vrf black processes
 4624  sshd
 4404  ntpd

Jun 13 2020, 9:17 PM · VyOS 1.3 Equuleus (1.3.0)

c-po added a comment to T2321: VRF support for SSH, NTP, SNMP service.

@daniil it will be fixed in tomorrows rolling ISO.

Jun 13 2020, 8:38 PM · VyOS 1.3 Equuleus (1.3.0)

c-po committed rVYOSONEX89a097ea0ad9: ssh: T2321: fix invalid string/list assignment of default port.

Jun 13 2020, 8:38 PM

c-po added a comment to T2574: wan-load-balance snat bug and route problem.

Can you share what you did to make it work again? NAT has recently be rewritten which could be the root cause.

Jun 13 2020, 8:34 AM · VyOS 1.3 Equuleus (1.3.6)

c-po merged T2577: /31 addresses are unable to be used in many cases into T2578: ipaddrcheck unaware of /31 host addresses - can no longer assign /31 mask to interface addresses.

Jun 13 2020, 8:33 AM · VyOS 1.3 Equuleus (1.3.0)

c-po merged task T2577: /31 addresses are unable to be used in many cases into T2578: ipaddrcheck unaware of /31 host addresses - can no longer assign /31 mask to interface addresses.

Jun 13 2020, 8:33 AM · VyOS 1.3 Equuleus (1.3.0)

c-po claimed T2589: delete pseudo-ethernet failed.

Jun 13 2020, 7:34 AM · VyOS 1.3 Equuleus (1.3.0)

Jun 12 2020

c-po added a comment to T421: Add Pv6 prefix delegation support.

A config Syntax is always migratable. Wide also supports scripts, but ISC PD (as I‘ve seen it, and interpret it) seems to have some rough edges. If you find a guide I will definately have a look.

Jun 12 2020, 1:54 PM · VyOS 1.3 Equuleus (1.3.0-epa1)

c-po added a comment to T421: Add Pv6 prefix delegation support.

@jjakob it was only choosen as it prooved to be "more simple" compared to ISC and that helper script. I have no affiliation with either implementation. I was not aware that it could cause other issue. If you need to change it to ISC you're free to go.

Jun 12 2020, 11:48 AM · VyOS 1.3 Equuleus (1.3.0-epa1)