Page MenuHomeVyOS Platform
Files F118306164

interface-vxlan.py
No OneTemporary
Actions

Size
6 KB
Referenced Files
None
Subscribers
None

interface-vxlan.py
View Options

#!/usr/bin/env python3
#
# Copyright (C) 2019 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
from os import environ
from sys import exit
from copy import deepcopy
from vyos.configdict import list_diff
from vyos.config import Config
from vyos.ifconfig import VXLANIf, Interface
from vyos.interfaces import get_type_of_interface
from vyos import ConfigError
from netifaces import interfaces
default_config_data = {
'address': [],
'address_remove': [],
'deleted': False,
'description': '',
'disable': False,
'group': '',
'intf': '',
'ip_arp_cache_tmo': 30,
'ip_proxy_arp': 0,
'link': '',
'mtu': 1450,
'remote': '',
'remote_port': 8472 # The Linux implementation of VXLAN pre-dates
# the IANA's selection of a standard destination port
}
def get_config():
vxlan = deepcopy(default_config_data)
conf = Config()
# determine tagNode instance
try:
vxlan['intf'] = environ['VYOS_TAGNODE_VALUE']
except KeyError as E:
print("Interface not specified")
# Check if interface has been removed
if not conf.exists('interfaces vxlan ' + vxlan['intf']):
vxlan['deleted'] = True
return vxlan
# set new configuration level
conf.set_level('interfaces vxlan ' + vxlan['intf'])
# retrieve configured interface addresses
if conf.exists('address'):
vxlan['address'] = conf.return_values('address')
# Determine interface addresses (currently effective) - to determine which
# address is no longer valid and needs to be removed from the interface
eff_addr = conf.return_effective_values('address')
act_addr = conf.return_values('address')
vxlan['address_remove'] = list_diff(eff_addr, act_addr)
# retrieve interface description
if conf.exists('description'):
vxlan['description'] = conf.return_value('description')
# Disable this interface
if conf.exists('disable'):
vxlan['disable'] = True
# VXLAN multicast grou
if conf.exists('group'):
vxlan['group'] = conf.return_value('group')
# ARP cache entry timeout in seconds
if conf.exists('ip arp-cache-timeout'):
vxlan['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
# Enable proxy-arp on this interface
if conf.exists('ip enable-proxy-arp'):
vxlan['ip_proxy_arp'] = 1
# VXLAN underlay interface
if conf.exists('link'):
vxlan['link'] = conf.return_value('link')
# Maximum Transmission Unit (MTU)
if conf.exists('mtu'):
vxlan['mtu'] = int(conf.return_value('mtu'))
# Remote address of VXLAN tunnel
if conf.exists('remote'):
vxlan['remote'] = conf.return_value('remote')
# Remote port of VXLAN tunnel
if conf.exists('port'):
vxlan['remote_port'] = int(conf.return_value('port'))
# Virtual Network Identifier
if conf.exists('vni'):
vxlan['vni'] = conf.return_value('vni')
return vxlan
def verify(vxlan):
if vxlan['deleted']:
# bail out early
return None
if vxlan['mtu'] < 1500:
print('WARNING: RFC7348 recommends VXLAN tunnels preserve a 1500 byte MTU')
if vxlan['group'] and not vxlan['link']:
raise ConfigError('Multicast VXLAN requires an underlaying interface ')
if not (vxlan['group'] or vxlan['remote']):
raise ConfigError('Group or remote must be configured')
if not vxlan['vni']:
raise ConfigError('Must configure VNI for VXLAN')
if vxlan['link']:
# VXLAN adds a 50 byte overhead - we need to check the underlaying MTU
# if our configured MTU is at least 50 bytes less
underlay_mtu = int(Interface(vxlan['link']).mtu)
if underlay_mtu < (vxlan['mtu'] + 50):
raise ConfigError('VXLAN has a 50 byte overhead, underlaying device ' \
'MTU is to small ({})'.format(underlay_mtu))
return None
def generate(vxlan):
return None
def apply(vxlan):
# Check if the VXLAN interface already exists
if vxlan['intf'] in interfaces():
v = VXLANIf(vxlan['intf'])
# VXLAN is super picky and the tunnel always needs to be recreated,
# thus we can simply always delete it first.
v.remove()
if not vxlan['deleted']:
# VXLAN interface needs to be created on-block
# instead of passing a ton of arguments, I just use a dict
# that is managed by vyos.ifconfig
conf = deepcopy(VXLANIf.get_config())
# Assign VXLAN instance configuration parameters to config dict
conf['vni'] = vxlan['vni']
conf['group'] = vxlan['group']
conf['dev'] = vxlan['link']
conf['remote'] = vxlan['remote']
conf['port'] = vxlan['remote_port']
# Finally create the new interface
v = VXLANIf(vxlan['intf'], config=conf)
# update interface description used e.g. by SNMP
v.ifalias = vxlan['description']
# Maximum Transfer Unit (MTU)
v.mtu = vxlan['mtu']
# configure ARP cache timeout in milliseconds
v.arp_cache_tmp = vxlan['ip_arp_cache_tmo']
# Enable proxy-arp on this interface
v.proxy_arp = vxlan['ip_proxy_arp']
# Configure interface address(es)
# - not longer required addresses get removed first
# - newly addresses will be added second
for addr in vxlan['address_remove']:
v.del_addr(addr)
for addr in vxlan['address']:
v.add_addr(addr)
# As the bond interface is always disabled first when changing
# parameters we will only re-enable the interface if it is not
# administratively disabled
if not vxlan['disable']:
v.state='up'
return None
if __name__ == '__main__':
try:
c = get_config()
verify(c)
generate(c)
apply(c)
except ConfigError as e:
print(e)
exit(1)

File Metadata

Mime Type
text/x-script.python
Expires
Sat, Oct 17, 12:12 AM (1 d, 19 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
4353324
Default Alt Text
interface-vxlan.py (6 KB)

Event Timeline