No OneTemporary
Actions

Size

74 KB

Referenced Files

None

Subscribers

None

View Options

	diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2
	new file mode 100644
	index 000000000..585db93eb
	--- /dev/null
	+++ b/data/templates/ids/suricata.j2
	@@ -0,0 +1,1280 @@
	+%YAML 1.1
	+---
	+
	+# Suricata configuration file. In addition to the comments describing all
	+# options in this file, full documentation can be found at:
	+# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
	+#
	+# This configuration file generated by:
	+# Suricata 6.0.10
	+
	+##
	+## Step 1: Inform Suricata about your network
	+##
	+
	+vars:
	+ # more specific is better for alert accuracy and performance
	+ address-groups:
	+{% for (name, value) in suricata['address_group'] %}
	+ {{ name }}: "[{{ value \| join(',') }}]"
	+{% endfor %}
	+
	+ port-groups:
	+{% for (name, value) in suricata['port_group'] %}
	+ {{ name }}: "[{{ value \| join(',') }}]"
	+{% endfor %}
	+
	+##
	+## Step 2: Select outputs to enable
	+##
	+
	+# The default logging directory. Any log or output file will be
	+# placed here if it's not specified with a full path name. This can be
	+# overridden with the -l command line parameter.
	+default-log-dir: /var/log/suricata/
	+
	+# Configure the type of alert (and other) logging you would like.
	+{% if suricata.log is vyos_defined %}
	+outputs:
	+{% if suricata.log.eve is vyos_defined %}
	+ # Extensible Event Format (nicknamed EVE) event log in JSON format
	+ - eve-log:
	+ enabled: yes
	+ filetype: {{ suricata.log.eve.filetype }} #regular\|syslog\|unix_dgram\|unix_stream\|redis
	+ filename: {{ suricata.log.eve.filename }}
	+
	+ types:
	+{% if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %}
	+ - alert:
	+ tagged-packets: yes
	+{% endif %}
	+{% if "http" in suricata.log.eve.type %}
	+ - http:
	+ enabled: yes
	+ extended: yes
	+{% endif %}
	+{% if "tls" in suricata.log.eve.type %}
	+ - tls:
	+ enabled: yes
	+ extended: yes # enable this for extended logging information
	+{% endif %}
	+{% for protocol in suricata.log.eve.type %}
	+{% if protocol not in ["alert","http","tls"] %}
	+ - {{ protocol }}:
	+ enabled: yes
	+{% endif %}
	+{% endfor %}
	+{% endif %}
	+{% endif %}
	+
	+##
	+## Step 3: Configure common capture settings
	+##
	+## See "Advanced Capture Options" below for more options, including Netmap
	+## and PF_RING.
	+##
	+
	+# Linux high speed capture support
	+af-packet:
	+{% for interface in suricata.interface %}
	+ - interface: {{ interface }}
	+ # Default clusterid. AF_PACKET will load balance packets based on flow.
	+ cluster-id: 99
	+ # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
	+ # This is only supported for Linux kernel > 3.1
	+ # possible value are:
	+ # * cluster_flow: all packets of a given flow are sent to the same socket
	+ # * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket
	+ # * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
	+ # socket. Requires at least Linux 3.14.
	+ # * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
	+ # more info.
	+ # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
	+ # with capture card using RSS (requires cpu affinity tuning and system IRQ tuning)
	+ cluster-type: cluster_flow
	+ # In some fragmentation cases, the hash can not be computed. If "defrag" is set
	+ # to yes, the kernel will do the needed defragmentation before sending the packets.
	+ defrag: yes
	+{% endfor %}
	+
	+# Cross platform libpcap capture support
	+pcap:
	+{% for interface in suricata.interface %}
	+ - interface: {{ interface }}
	+{% endfor %}
	+
	+# Settings for reading pcap files
	+pcap-file:
	+ # Possible values are:
	+ # - yes: checksum validation is forced
	+ # - no: checksum validation is disabled
	+ # - auto: Suricata uses a statistical approach to detect when
	+ # checksum off-loading is used. (default)
	+ # Warning: 'checksum-validation' must be set to yes to have checksum tested
	+ checksum-checks: auto
	+
	+# See "Advanced Capture Options" below for more options, including Netmap
	+# and PF_RING.
	+
	+
	+##
	+## Step 4: App Layer Protocol configuration
	+##
	+
	+# Configure the app-layer parsers.
	+#
	+# The error-policy setting applies to all app-layer parsers. Values can be
	+# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or
	+# "ignore" (the default).
	+#
	+# The protocol's section details each protocol.
	+#
	+# The option "enabled" takes 3 values - "yes", "no", "detection-only".
	+# "yes" enables both detection and the parser, "no" disables both, and
	+# "detection-only" enables protocol detection only (parser disabled).
	+app-layer:
	+ # error-policy: ignore
	+ protocols:
	+ rfb:
	+ enabled: yes
	+ detection-ports:
	+ dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909
	+ # MQTT, disabled by default.
	+ mqtt:
	+ enabled: yes
	+ # max-msg-length: 1mb
	+ # subscribe-topic-match-limit: 100
	+ # unsubscribe-topic-match-limit: 100
	+ # Maximum number of live MQTT transactions per flow
	+ # max-tx: 4096
	+ krb5:
	+ enabled: yes
	+ snmp:
	+ enabled: yes
	+ ikev2:
	+ enabled: yes
	+ tls:
	+ enabled: yes
	+ detection-ports:
	+ dp: 443
	+
	+ # Generate JA3 fingerprint from client hello. If not specified it
	+ # will be disabled by default, but enabled if rules require it.
	+ #ja3-fingerprints: auto
	+
	+ # What to do when the encrypted communications start:
	+ # - default: keep tracking TLS session, check for protocol anomalies,
	+ # inspect tls_* keywords. Disables inspection of unmodified
	+ # 'content' signatures.
	+ # - bypass: stop processing this flow as much as possible. No further
	+ # TLS parsing and inspection. Offload flow bypass to kernel
	+ # or hardware if possible.
	+ # - full: keep tracking and inspection as normal. Unmodified content
	+ # keyword signatures are inspected as well.
	+ #
	+ # For best performance, select 'bypass'.
	+ #
	+ #encryption-handling: default
	+
	+ dcerpc:
	+ enabled: yes
	+ ftp:
	+ enabled: yes
	+ # memcap: 64mb
	+ rdp:
	+ enabled: yes
	+ ssh:
	+ enabled: yes
	+ #hassh: yes
	+ # HTTP2: Experimental HTTP 2 support. Disabled by default.
	+ http2:
	+ enabled: no
	+ # use http keywords on HTTP2 traffic
	+ http1-rules: no
	+ smtp:
	+ enabled: yes
	+ raw-extraction: no
	+ # Configure SMTP-MIME Decoder
	+ mime:
	+ # Decode MIME messages from SMTP transactions
	+ # (may be resource intensive)
	+ # This field supersedes all others because it turns the entire
	+ # process on or off
	+ decode-mime: yes
	+
	+ # Decode MIME entity bodies (ie. Base64, quoted-printable, etc.)
	+ decode-base64: yes
	+ decode-quoted-printable: yes
	+
	+ # Maximum bytes per header data value stored in the data structure
	+ # (default is 2000)
	+ header-value-depth: 2000
	+
	+ # Extract URLs and save in state data structure
	+ extract-urls: yes
	+ # Set to yes to compute the md5 of the mail body. You will then
	+ # be able to journalize it.
	+ body-md5: no
	+ # Configure inspected-tracker for file_data keyword
	+ inspected-tracker:
	+ content-limit: 100000
	+ content-inspect-min-size: 32768
	+ content-inspect-window: 4096
	+ imap:
	+ enabled: detection-only
	+ smb:
	+ enabled: yes
	+ detection-ports:
	+ dp: 139, 445
	+
	+ # Stream reassembly size for SMB streams. By default track it completely.
	+ #stream-depth: 0
	+
	+ nfs:
	+ enabled: yes
	+ tftp:
	+ enabled: yes
	+ dns:
	+ tcp:
	+ enabled: yes
	+ detection-ports:
	+ dp: 53
	+ udp:
	+ enabled: yes
	+ detection-ports:
	+ dp: 53
	+ http:
	+ enabled: yes
	+ # memcap: Maximum memory capacity for HTTP
	+ # Default is unlimited, values can be 64mb, e.g.
	+
	+ # default-config: Used when no server-config matches
	+ # personality: List of personalities used by default
	+ # request-body-limit: Limit reassembly of request body for inspection
	+ # by http_client_body & pcre /P option.
	+ # response-body-limit: Limit reassembly of response body for inspection
	+ # by file_data, http_server_body & pcre /Q option.
	+ #
	+ # For advanced options, see the user guide
	+
	+
	+ # server-config: List of server configurations to use if address matches
	+ # address: List of IP addresses or networks for this block
	+ # personality: List of personalities used by this block
	+ #
	+ # Then, all the fields from default-config can be overloaded
	+ #
	+ # Currently Available Personalities:
	+ # Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
	+ # IIS_7_0, IIS_7_5, Apache_2
	+ libhtp:
	+ default-config:
	+ personality: IDS
	+
	+ # Can be specified in kb, mb, gb. Just a number indicates
	+ # it's in bytes.
	+ request-body-limit: 100kb
	+ response-body-limit: 100kb
	+
	+ # inspection limits
	+ request-body-minimal-inspect-size: 32kb
	+ request-body-inspect-window: 4kb
	+ response-body-minimal-inspect-size: 40kb
	+ response-body-inspect-window: 16kb
	+
	+ # response body decompression (0 disables)
	+ response-body-decompress-layer-limit: 2
	+
	+ # auto will use http-body-inline mode in IPS mode, yes or no set it statically
	+ http-body-inline: auto
	+
	+ # Decompress SWF files.
	+ # Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
	+ # compress-depth:
	+ # Specifies the maximum amount of data to decompress,
	+ # set 0 for unlimited.
	+ # decompress-depth:
	+ # Specifies the maximum amount of decompressed data to obtain,
	+ # set 0 for unlimited.
	+ swf-decompression:
	+ enabled: yes
	+ type: both
	+ compress-depth: 100kb
	+ decompress-depth: 100kb
	+
	+ # Use a random value for inspection sizes around the specified value.
	+ # This lowers the risk of some evasion techniques but could lead
	+ # to detection change between runs. It is set to 'yes' by default.
	+ #randomize-inspection-sizes: yes
	+ # If "randomize-inspection-sizes" is active, the value of various
	+ # inspection size will be chosen from the [1 - range%, 1 + range%]
	+ # range
	+ # Default value of "randomize-inspection-range" is 10.
	+ #randomize-inspection-range: 10
	+
	+ # decoding
	+ double-decode-path: no
	+ double-decode-query: no
	+
	+ # Can enable LZMA decompression
	+ #lzma-enabled: false
	+ # Memory limit usage for LZMA decompression dictionary
	+ # Data is decompressed until dictionary reaches this size
	+ #lzma-memlimit: 1mb
	+ # Maximum decompressed size with a compression ratio
	+ # above 2048 (only LZMA can reach this ratio, deflate cannot)
	+ #compression-bomb-limit: 1mb
	+ # Maximum time spent decompressing a single transaction in usec
	+ #decompression-time-limit: 100000
	+
	+ server-config:
	+
	+ #- apache:
	+ # address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
	+ # personality: Apache_2
	+ # # Can be specified in kb, mb, gb. Just a number indicates
	+ # # it's in bytes.
	+ # request-body-limit: 4096
	+ # response-body-limit: 4096
	+ # double-decode-path: no
	+ # double-decode-query: no
	+
	+ #- iis7:
	+ # address:
	+ # - 192.168.0.0/24
	+ # - 192.168.10.0/24
	+ # personality: IIS_7_0
	+ # # Can be specified in kb, mb, gb. Just a number indicates
	+ # # it's in bytes.
	+ # request-body-limit: 4096
	+ # response-body-limit: 4096
	+ # double-decode-path: no
	+ # double-decode-query: no
	+
	+ # Note: Modbus probe parser is minimalist due to the limited usage in the field.
	+ # Only Modbus message length (greater than Modbus header length)
	+ # and protocol ID (equal to 0) are checked in probing parser
	+ # It is important to enable detection port and define Modbus port
	+ # to avoid false positives
	+ modbus:
	+ # How many unanswered Modbus requests are considered a flood.
	+ # If the limit is reached, the app-layer-event:modbus.flooded; will match.
	+ #request-flood: 500
	+
	+ enabled: no
	+ detection-ports:
	+ dp: 502
	+ # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
	+ # is recommended to keep the TCP connection opened with a remote device
	+ # and not to open and close it for each MODBUS/TCP transaction. In that
	+ # case, it is important to set the depth of the stream reassembling as
	+ # unlimited (stream.reassembly.depth: 0)
	+
	+ # Stream reassembly size for modbus. By default track it completely.
	+ stream-depth: 0
	+
	+ # DNP3
	+ dnp3:
	+ enabled: no
	+ detection-ports:
	+ dp: 20000
	+
	+ # SCADA EtherNet/IP and CIP protocol support
	+ enip:
	+ enabled: no
	+ detection-ports:
	+ dp: 44818
	+ sp: 44818
	+
	+ ntp:
	+ enabled: yes
	+
	+ dhcp:
	+ enabled: yes
	+
	+ sip:
	+ enabled: yes
	+
	+# Limit for the maximum number of asn1 frames to decode (default 256)
	+asn1-max-frames: 256
	+
	+# Datasets default settings
	+# datasets:
	+# # Default fallback memcap and hashsize values for datasets in case these
	+# # were not explicitly defined.
	+# defaults:
	+# memcap: 100mb
	+# hashsize: 2048
	+
	+##############################################################################
	+##
	+## Advanced settings below
	+##
	+##############################################################################
	+
	+##
	+## Run Options
	+##
	+
	+# Run Suricata with a specific user-id and group-id:
	+#run-as:
	+# user: suri
	+# group: suri
	+
	+# Some logging modules will use that name in event as identifier. The default
	+# value is the hostname
	+#sensor-name: suricata
	+
	+# Default location of the pid file. The pid file is only used in
	+# daemon mode (start Suricata with -D). If not running in daemon mode
	+# the --pidfile command line option must be used to create a pid file.
	+#pid-file: /var/run/suricata.pid
	+
	+# Daemon working directory
	+# Suricata will change directory to this one if provided
	+# Default: "/"
	+#daemon-directory: "/"
	+
	+# Umask.
	+# Suricata will use this umask if it is provided. By default it will use the
	+# umask passed on by the shell.
	+#umask: 022
	+
	+# Suricata core dump configuration. Limits the size of the core dump file to
	+# approximately max-dump. The actual core dump size will be a multiple of the
	+# page size. Core dumps that would be larger than max-dump are truncated. On
	+# Linux, the actual core dump size may be a few pages larger than max-dump.
	+# Setting max-dump to 0 disables core dumping.
	+# Setting max-dump to 'unlimited' will give the full core dump file.
	+# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
	+# to be 'unlimited'.
	+
	+coredump:
	+ max-dump: unlimited
	+
	+# If the Suricata box is a router for the sniffed networks, set it to 'router'. If
	+# it is a pure sniffing setup, set it to 'sniffer-only'.
	+# If set to auto, the variable is internally switched to 'router' in IPS mode
	+# and 'sniffer-only' in IDS mode.
	+# This feature is currently only used by the reject* keywords.
	+host-mode: auto
	+
	+# Number of packets preallocated per thread. The default is 1024. A higher number
	+# will make sure each CPU will be more easily kept busy, but may negatively
	+# impact caching.
	+#max-pending-packets: 1024
	+
	+# Runmode the engine should use. Please check --list-runmodes to get the available
	+# runmodes for each packet acquisition method. Default depends on selected capture
	+# method. 'workers' generally gives best performance.
	+#runmode: autofp
	+
	+# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
	+#
	+# Supported schedulers are:
	+#
	+# hash - Flow assigned to threads using the 5-7 tuple hash.
	+# ippair - Flow assigned to threads using addresses only.
	+#
	+#autofp-scheduler: hash
	+
	+# Preallocated size for each packet. Default is 1514 which is the classical
	+# size for pcap on Ethernet. You should adjust this value to the highest
	+# packet size (MTU + hardware header) on your system.
	+#default-packet-size: 1514
	+
	+# Unix command socket that can be used to pass commands to Suricata.
	+# An external tool can then connect to get information from Suricata
	+# or trigger some modifications of the engine. Set enabled to yes
	+# to activate the feature. In auto mode, the feature will only be
	+# activated in live capture mode. You can use the filename variable to set
	+# the file name of the socket.
	+unix-command:
	+ enabled: yes
	+ filename: /run/suricata/suricata.socket
	+
	+# Magic file. The extension .mgc is added to the value here.
	+#magic-file: /usr/share/file/magic
	+#magic-file:
	+
	+# GeoIP2 database file. Specify path and filename of GeoIP2 database
	+# if using rules with "geoip" rule option.
	+#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
	+
	+legacy:
	+ uricontent: enabled
	+
	+##
	+## Detection settings
	+##
	+
	+# Set the order of alerts based on actions
	+# The default order is pass, drop, reject, alert
	+# action-order:
	+# - pass
	+# - drop
	+# - reject
	+# - alert
	+
	+# Define maximum number of possible alerts that can be triggered for the same
	+# packet. Default is 15
	+#packet-alert-max: 15
	+
	+# IP Reputation
	+#reputation-categories-file: /etc/suricata/iprep/categories.txt
	+#default-reputation-path: /etc/suricata/iprep
	+#reputation-files:
	+# - reputation.list
	+
	+# When run with the option --engine-analysis, the engine will read each of
	+# the parameters below, and print reports for each of the enabled sections
	+# and exit. The reports are printed to a file in the default log dir
	+# given by the parameter "default-log-dir", with engine reporting
	+# subsection below printing reports in its own report file.
	+engine-analysis:
	+ # enables printing reports for fast-pattern for every rule.
	+ rules-fast-pattern: yes
	+ # enables printing reports for each rule
	+ rules: yes
	+
	+#recursion and match limits for PCRE where supported
	+pcre:
	+ match-limit: 3500
	+ match-limit-recursion: 1500
	+
	+##
	+## Advanced Traffic Tracking and Reconstruction Settings
	+##
	+
	+# Host specific policies for defragmentation and TCP stream
	+# reassembly. The host OS lookup is done using a radix tree, just
	+# like a routing table so the most specific entry matches.
	+host-os-policy:
	+ # Make the default policy windows.
	+ windows: [0.0.0.0/0]
	+ bsd: []
	+ bsd-right: []
	+ old-linux: []
	+ linux: []
	+ old-solaris: []
	+ solaris: []
	+ hpux10: []
	+ hpux11: []
	+ irix: []
	+ macos: []
	+ vista: []
	+ windows2k3: []
	+
	+# Defrag settings:
	+
	+# The memcap-policy value can be "drop-flow", "pass-flow", "bypass",
	+# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default).
	+defrag:
	+ memcap: 32mb
	+ # memcap-policy: ignore
	+ hash-size: 65536
	+ trackers: 65535 # number of defragmented flows to follow
	+ max-frags: 65535 # number of fragments to keep (higher than trackers)
	+ prealloc: yes
	+ timeout: 60
	+
	+# Enable defrag per host settings
	+# host-config:
	+#
	+# - dmz:
	+# timeout: 30
	+# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
	+#
	+# - lan:
	+# timeout: 45
	+# address:
	+# - 192.168.0.0/24
	+# - 192.168.10.0/24
	+# - 172.16.14.0/24
	+
	+# Flow settings:
	+# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
	+# for flow allocation inside the engine. You can change this value to allow
	+# more memory usage for flows.
	+# The hash-size determines the size of the hash used to identify flows inside
	+# the engine, and by default the value is 65536.
	+# At startup, the engine can preallocate a number of flows, to get better
	+# performance. The number of flows preallocated is 10000 by default.
	+# emergency-recovery is the percentage of flows that the engine needs to
	+# prune before clearing the emergency state. The emergency state is activated
	+# when the memcap limit is reached, allowing new flows to be created, but
	+# pruning them with the emergency timeouts (they are defined below).
	+# If the memcap is reached, the engine will try to prune flows
	+# with the default timeouts. If it doesn't find a flow to prune, it will set
	+# the emergency bit and it will try again with more aggressive timeouts.
	+# If that doesn't work, then it will try to kill the oldest flows using
	+# last time seen flows.
	+# The memcap can be specified in kb, mb, gb. Just a number indicates it's
	+# in bytes.
	+# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet",
	+# "pass-packet", "reject" or "ignore" (which is the default).
	+
	+flow:
	+ memcap: 128mb
	+ #memcap-policy: ignore
	+ hash-size: 65536
	+ prealloc: 10000
	+ emergency-recovery: 30
	+ #managers: 1 # default to one flow manager
	+ #recyclers: 1 # default to one flow recycler thread
	+
	+# This option controls the use of VLAN ids in the flow (and defrag)
	+# hashing. Normally this should be enabled, but in some (broken)
	+# setups where both sides of a flow are not tagged with the same VLAN
	+# tag, we can ignore the VLAN id's in the flow hashing.
	+vlan:
	+ use-for-tracking: true
	+
	+# Specific timeouts for flows. Here you can specify the timeouts that the
	+# active flows will wait to transit from the current state to another, on each
	+# protocol. The value of "new" determines the seconds to wait after a handshake or
	+# stream startup before the engine frees the data of that flow it doesn't
	+# change the state to established (usually if we don't receive more packets
	+# of that flow). The value of "established" is the amount of
	+# seconds that the engine will wait to free the flow if that time elapses
	+# without receiving new packets or closing the connection. "closed" is the
	+# amount of time to wait after a flow is closed (usually zero). "bypassed"
	+# timeout controls locally bypassed flows. For these flows we don't do any other
	+# tracking. If no packets have been seen after this timeout, the flow is discarded.
	+#
	+# There's an emergency mode that will become active under attack circumstances,
	+# making the engine to check flow status faster. This configuration variables
	+# use the prefix "emergency-" and work similar as the normal ones.
	+# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
	+# icmp.
	+
	+flow-timeouts:
	+
	+ default:
	+ new: 30
	+ established: 300
	+ closed: 0
	+ bypassed: 100
	+ emergency-new: 10
	+ emergency-established: 100
	+ emergency-closed: 0
	+ emergency-bypassed: 50
	+ tcp:
	+ new: 60
	+ established: 600
	+ closed: 60
	+ bypassed: 100
	+ emergency-new: 5
	+ emergency-established: 100
	+ emergency-closed: 10
	+ emergency-bypassed: 50
	+ udp:
	+ new: 30
	+ established: 300
	+ bypassed: 100
	+ emergency-new: 10
	+ emergency-established: 100
	+ emergency-bypassed: 50
	+ icmp:
	+ new: 30
	+ established: 300
	+ bypassed: 100
	+ emergency-new: 10
	+ emergency-established: 100
	+ emergency-bypassed: 50
	+
	+# Stream engine settings. Here the TCP stream tracking and reassembly
	+# engine is configured.
	+#
	+# stream:
	+# memcap: 64mb # Can be specified in kb, mb, gb. Just a
	+# # number indicates it's in bytes.
	+# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
	+# # "drop-packet", "pass-packet", "reject" or
	+# # "ignore" default is "ignore"
	+# checksum-validation: yes # To validate the checksum of received
	+# # packet. If csum validation is specified as
	+# # "yes", then packets with invalid csum values will not
	+# # be processed by the engine stream/app layer.
	+# # Warning: locally generated traffic can be
	+# # generated without checksum due to hardware offload
	+# # of checksum. You can control the handling of checksum
	+# # on a per-interface basis via the 'checksum-checks'
	+# # option
	+# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
	+# midstream: false # don't allow midstream session pickups
	+# midstream-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
	+# # "drop-packet", "pass-packet", "reject" or
	+# # "ignore" default is "ignore"
	+# async-oneside: false # don't enable async stream handling
	+# inline: no # stream inline mode
	+# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
	+# max-synack-queued: 5 # Max different SYN/ACKs to queue
	+# bypass: no # Bypass packets when stream.reassembly.depth is reached.
	+# # Warning: first side to reach this triggers
	+# # the bypass.
	+#
	+# reassembly:
	+# memcap: 256mb # Can be specified in kb, mb, gb. Just a number
	+# # indicates it's in bytes.
	+# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
	+# # "drop-packet", "pass-packet", "reject" or
	+# # "ignore" default is "ignore"
	+# depth: 1mb # Can be specified in kb, mb, gb. Just a number
	+# # indicates it's in bytes.
	+# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
	+# # this size. Can be specified in kb, mb,
	+# # gb. Just a number indicates it's in bytes.
	+# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
	+# # this size. Can be specified in kb, mb,
	+# # gb. Just a number indicates it's in bytes.
	+# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
	+# # This lowers the risk of some evasion techniques but could lead
	+# # to detection change between runs. It is set to 'yes' by default.
	+# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
	+# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
	+# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
	+# # calculation for toclient-chunk-size.
	+# # Default value of randomize-chunk-range is 10.
	+#
	+# raw: yes # 'Raw' reassembly enabled or disabled.
	+# # raw is for content inspection by detection
	+# # engine.
	+#
	+# segment-prealloc: 2048 # number of segments preallocated per thread
	+#
	+# check-overlap-different-data: true\|false
	+# # check if a segment contains different data
	+# # than what we've already seen for that
	+# # position in the stream.
	+# # This is enabled automatically if inline mode
	+# # is used or when stream-event:reassembly_overlap_different_data;
	+# # is used in a rule.
	+#
	+stream:
	+ memcap: 64mb
	+ #memcap-policy: ignore
	+ checksum-validation: yes # reject incorrect csums
	+ #midstream: false
	+ #midstream-policy: ignore
	+ inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
	+ reassembly:
	+ memcap: 256mb
	+ #memcap-policy: ignore
	+ depth: 1mb # reassemble 1mb into a stream
	+ toserver-chunk-size: 2560
	+ toclient-chunk-size: 2560
	+ randomize-chunk-size: yes
	+ #randomize-chunk-range: 10
	+ #raw: yes
	+ #segment-prealloc: 2048
	+ #check-overlap-different-data: true
	+
	+# Host table:
	+#
	+# Host table is used by the tagging and per host thresholding subsystems.
	+#
	+host:
	+ hash-size: 4096
	+ prealloc: 1000
	+ memcap: 32mb
	+
	+# IP Pair table:
	+#
	+# Used by xbits 'ippair' tracking.
	+#
	+#ippair:
	+# hash-size: 4096
	+# prealloc: 1000
	+# memcap: 32mb
	+
	+# Decoder settings
	+
	+decoder:
	+ # Teredo decoder is known to not be completely accurate
	+ # as it will sometimes detect non-teredo as teredo.
	+ teredo:
	+ enabled: true
	+ # ports to look for Teredo. Max 4 ports. If no ports are given, or
	+ # the value is set to 'any', Teredo detection runs on _all_ UDP packets.
	+ ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
	+
	+ # VXLAN decoder is assigned to up to 4 UDP ports. By default only the
	+ # IANA assigned port 4789 is enabled.
	+ vxlan:
	+ enabled: true
	+ ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'.
	+
	+ # VNTag decode support
	+ vntag:
	+ enabled: false
	+
	+ # Geneve decoder is assigned to up to 4 UDP ports. By default only the
	+ # IANA assigned port 6081 is enabled.
	+ geneve:
	+ enabled: true
	+ ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'.
	+
	+ # maximum number of decoder layers for a packet
	+ # max-layers: 16
	+
	+##
	+## Performance tuning and profiling
	+##
	+
	+# The detection engine builds internal groups of signatures. The engine
	+# allows us to specify the profile to use for them, to manage memory in an
	+# efficient way keeping good performance. For the profile keyword you
	+# can use the words "low", "medium", "high" or "custom". If you use custom,
	+# make sure to define the values in the "custom-values" section.
	+# Usually you would prefer medium/high/low.
	+#
	+# "sgh mpm-context", indicates how the staging should allot mpm contexts for
	+# the signature groups. "single" indicates the use of a single context for
	+# all the signature group heads. "full" indicates a mpm-context for each
	+# group head. "auto" lets the engine decide the distribution of contexts
	+# based on the information the engine gathers on the patterns from each
	+# group head.
	+#
	+# The option inspection-recursion-limit is used to limit the recursive calls
	+# in the content inspection code. For certain payload-sig combinations, we
	+# might end up taking too much time in the content inspection code.
	+# If the argument specified is 0, the engine uses an internally defined
	+# default limit. When a value is not specified, there are no limits on the recursion.
	+detect:
	+ profile: medium
	+ custom-values:
	+ toclient-groups: 3
	+ toserver-groups: 25
	+ sgh-mpm-context: auto
	+ inspection-recursion-limit: 3000
	+ # If set to yes, the loading of signatures will be made after the capture
	+ # is started. This will limit the downtime in IPS mode.
	+ #delayed-detect: yes
	+
	+ prefilter:
	+ # default prefiltering setting. "mpm" only creates MPM/fast_pattern
	+ # engines. "auto" also sets up prefilter engines for other keywords.
	+ # Use --list-keywords=all to see which keywords support prefiltering.
	+ default: mpm
	+
	+ # the grouping values above control how many groups are created per
	+ # direction. Port whitelisting forces that port to get its own group.
	+ # Very common ports will benefit, as well as ports with many expensive
	+ # rules.
	+ grouping:
	+ #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
	+ #udp-whitelist: 53, 135, 5060
	+
	+ profiling:
	+ # Log the rules that made it past the prefilter stage, per packet
	+ # default is off. The threshold setting determines how many rules
	+ # must have made it past pre-filter for that rule to trigger the
	+ # logging.
	+ #inspect-logging-threshold: 200
	+ grouping:
	+ dump-to-disk: false
	+ include-rules: false # very verbose
	+ include-mpm-stats: false
	+
	+# Select the multi pattern algorithm you want to run for scan/search the
	+# in the engine.
	+#
	+# The supported algorithms are:
	+# "ac" - Aho-Corasick, default implementation
	+# "ac-bs" - Aho-Corasick, reduced memory implementation
	+# "ac-ks" - Aho-Corasick, "Ken Steele" variant
	+# "hs" - Hyperscan, available when built with Hyperscan support
	+#
	+# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
	+# available, "ac" otherwise.
	+#
	+# The mpm you choose also decides the distribution of mpm contexts for
	+# signature groups, specified by the conf - "detect.sgh-mpm-context".
	+# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
	+# to be set to "single", because of ac's memory requirements, unless the
	+# ruleset is small enough to fit in memory, in which case one can
	+# use "full" with "ac". The rest of the mpms can be run in "full" mode.
	+
	+mpm-algo: auto
	+
	+# Select the matching algorithm you want to use for single-pattern searches.
	+#
	+# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
	+# available if Suricata has been built with Hyperscan support).
	+#
	+# The default of "auto" will use "hs" if available, otherwise "bm".
	+
	+spm-algo: auto
	+
	+# Suricata is multi-threaded. Here the threading can be influenced.
	+threading:
	+ set-cpu-affinity: no
	+ # Tune cpu affinity of threads. Each family of threads can be bound
	+ # to specific CPUs.
	+ #
	+ # These 2 apply to the all runmodes:
	+ # management-cpu-set is used for flow timeout handling, counters
	+ # worker-cpu-set is used for 'worker' threads
	+ #
	+ # Additionally, for autofp these apply:
	+ # receive-cpu-set is used for capture threads
	+ # verdict-cpu-set is used for IPS verdict threads
	+ #
	+ cpu-affinity:
	+ - management-cpu-set:
	+ cpu: [ 0 ] # include only these CPUs in affinity settings
	+ - receive-cpu-set:
	+ cpu: [ 0 ] # include only these CPUs in affinity settings
	+ - worker-cpu-set:
	+ cpu: [ "all" ]
	+ mode: "exclusive"
	+ # Use explicitly 3 threads and don't compute number by using
	+ # detect-thread-ratio variable:
	+ # threads: 3
	+ prio:
	+ low: [ 0 ]
	+ medium: [ "1-2" ]
	+ high: [ 3 ]
	+ default: "medium"
	+ #- verdict-cpu-set:
	+ # cpu: [ 0 ]
	+ # prio:
	+ # default: "high"
	+ #
	+ # By default Suricata creates one "detect" thread per available CPU/CPU core.
	+ # This setting allows controlling this behaviour. A ratio setting of 2 will
	+ # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
	+ # will result in 4 detect threads. If values below 1 are used, less threads
	+ # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
	+ # thread being created. Regardless of the setting at a minimum 1 detect
	+ # thread will always be created.
	+ #
	+ detect-thread-ratio: 1.0
	+ #
	+ # By default, the per-thread stack size is left to its default setting. If
	+ # the default thread stack size is too small, use the following configuration
	+ # setting to change the size. Note that if any thread's stack size cannot be
	+ # set to this value, a fatal error occurs.
	+ #
	+ # Generally, the per-thread stack-size should not exceed 8MB.
	+ #stack-size: 8mb
	+
	+# Luajit has a strange memory requirement, its 'states' need to be in the
	+# first 2G of the process' memory.
	+#
	+# 'luajit.states' is used to control how many states are preallocated.
	+# State use: per detect script: 1 per detect thread. Per output script: 1 per
	+# script.
	+luajit:
	+ states: 128
	+
	+# Profiling settings. Only effective if Suricata has been built with
	+# the --enable-profiling configure flag.
	+#
	+profiling:
	+ # Run profiling for every X-th packet. The default is 1, which means we
	+ # profile every packet. If set to 1000, one packet is profiled for every
	+ # 1000 received.
	+ #sample-rate: 1000
	+
	+ # rule profiling
	+ rules:
	+
	+ # Profiling can be disabled here, but it will still have a
	+ # performance impact if compiled in.
	+ enabled: yes
	+ filename: rule_perf.log
	+ append: yes
	+
	+ # Sort options: ticks, avgticks, checks, matches, maxticks
	+ # If commented out all the sort options will be used.
	+ #sort: avgticks
	+
	+ # Limit the number of sids for which stats are shown at exit (per sort).
	+ limit: 10
	+
	+ # output to json
	+ json: yes
	+
	+ # per keyword profiling
	+ keywords:
	+ enabled: yes
	+ filename: keyword_perf.log
	+ append: yes
	+
	+ prefilter:
	+ enabled: yes
	+ filename: prefilter_perf.log
	+ append: yes
	+
	+ # per rulegroup profiling
	+ rulegroups:
	+ enabled: yes
	+ filename: rule_group_perf.log
	+ append: yes
	+
	+ # packet profiling
	+ packets:
	+
	+ # Profiling can be disabled here, but it will still have a
	+ # performance impact if compiled in.
	+ enabled: yes
	+ filename: packet_stats.log
	+ append: yes
	+
	+ # per packet csv output
	+ csv:
	+
	+ # Output can be disabled here, but it will still have a
	+ # performance impact if compiled in.
	+ enabled: no
	+ filename: packet_stats.csv
	+
	+ # profiling of locking. Only available when Suricata was built with
	+ # --enable-profiling-locks.
	+ locks:
	+ enabled: no
	+ filename: lock_stats.log
	+ append: yes
	+
	+ pcap-log:
	+ enabled: no
	+ filename: pcaplog_stats.log
	+ append: yes
	+
	+##
	+## Netfilter integration
	+##
	+
	+# When running in NFQ inline mode, it is possible to use a simulated
	+# non-terminal NFQUEUE verdict.
	+# This permits sending all needed packet to Suricata via this rule:
	+# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
	+# And below, you can have your standard filtering ruleset. To activate
	+# this mode, you need to set mode to 'repeat'
	+# If you want a packet to be sent to another queue after an ACCEPT decision
	+# set the mode to 'route' and set next-queue value.
	+# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance
	+# by processing several packets before sending a verdict (worker runmode only).
	+# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel
	+# accept the packet if Suricata is not able to keep pace.
	+# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
	+# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
	+# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
	+# directly accept all packets of a flow once a packet has been marked.
	+nfq:
	+# mode: accept
	+# repeat-mark: 1
	+# repeat-mask: 1
	+# bypass-mark: 1
	+# bypass-mask: 1
	+# route-queue: 2
	+# batchcount: 20
	+# fail-open: yes
	+
	+#nflog support
	+nflog:
	+ # netlink multicast group
	+ # (the same as the iptables --nflog-group param)
	+ # Group 0 is used by the kernel, so you can't use it
	+ - group: 2
	+ # netlink buffer size
	+ buffer-size: 18432
	+ # put default value here
	+ - group: default
	+ # set number of packets to queue inside kernel
	+ qthreshold: 1
	+ # set the delay before flushing packet in the kernel's queue
	+ qtimeout: 100
	+ # netlink max buffer size
	+ max-size: 20000
	+
	+##
	+## Advanced Capture Options
	+##
	+
	+# General settings affecting packet capture
	+capture:
	+ # disable NIC offloading. It's restored when Suricata exits.
	+ # Enabled by default.
	+ #disable-offloading: false
	+ #
	+ # disable checksum validation. Same as setting '-k none' on the
	+ # commandline.
	+ #checksum-validation: none
	+
	+# Netmap support
	+#
	+# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has
	+# built-in Netmap support or compile and install the Netmap module and appropriate
	+# NIC driver for your Linux system.
	+# To reach maximum throughput disable all receive-, segmentation-,
	+# checksum- offloading on your NIC (using ethtool or similar).
	+# Disabling TX checksum offloading is required for connecting OS endpoint
	+# with NIC endpoint.
	+# You can find more information at https://github.com/luigirizzo/netmap
	+#
	+netmap:
	+ - interface: default
	+
	+# PF_RING configuration: for use with native PF_RING support
	+# for more info see http://www.ntop.org/products/pf_ring/
	+pfring:
	+ - interface: default
	+ #threads: 2
	+
	+# For FreeBSD ipfw(8) divert(4) support.
	+# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
	+# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
	+# Additionally, you need to have an ipfw rule for the engine to see
	+# the packets from ipfw. For Example:
	+#
	+# ipfw add 100 divert 8000 ip from any to any
	+#
	+# N.B. This example uses "8000" -- this number must mach the values
	+# you passed on the command line, i.e., -d 8000
	+#
	+ipfw:
	+
	+ # Reinject packets at the specified ipfw rule number. This config
	+ # option is the ipfw rule number AT WHICH rule processing continues
	+ # in the ipfw processing system after the engine has finished
	+ # inspecting the packet for acceptance. If no rule number is specified,
	+ # accepted packets are reinjected at the divert rule which they entered
	+ # and IPFW rule processing continues. No check is done to verify
	+ # this will rule makes sense so care must be taken to avoid loops in ipfw.
	+ #
	+ ## The following example tells the engine to reinject packets
	+ # back into the ipfw firewall AT rule number 5500:
	+ #
	+ # ipfw-reinjection-rule-number: 5500
	+
	+
	+napatech:
	+ # When use_all_streams is set to "yes" the initialization code will query
	+ # the Napatech service for all configured streams and listen on all of them.
	+ # When set to "no" the streams config array will be used.
	+ #
	+ # This option necessitates running the appropriate NTPL commands to create
	+ # the desired streams prior to running Suricata.
	+ #use-all-streams: no
	+
	+ # The streams to listen on when auto-config is disabled or when and threading
	+ # cpu-affinity is disabled. This can be either:
	+ # an individual stream (e.g. streams: [0])
	+ # or
	+ # a range of streams (e.g. streams: ["0-3"])
	+ #
	+ streams: ["0-3"]
	+
	+ # Stream stats can be enabled to provide fine grain packet and byte counters
	+ # for each thread/stream that is configured.
	+ #
	+ enable-stream-stats: no
	+
	+ # When auto-config is enabled the streams will be created and assigned
	+ # automatically to the NUMA node where the thread resides. If cpu-affinity
	+ # is enabled in the threading section. Then the streams will be created
	+ # according to the number of worker threads specified in the worker-cpu-set.
	+ # Otherwise, the streams array is used to define the streams.
	+ #
	+ # This option is intended primarily to support legacy configurations.
	+ #
	+ # This option cannot be used simultaneously with either "use-all-streams"
	+ # or "hardware-bypass".
	+ #
	+ auto-config: yes
	+
	+ # Enable hardware level flow bypass.
	+ #
	+ hardware-bypass: yes
	+
	+ # Enable inline operation. When enabled traffic arriving on a given port is
	+ # automatically forwarded out its peer port after analysis by Suricata.
	+ #
	+ inline: no
	+
	+ # Ports indicates which Napatech ports are to be used in auto-config mode.
	+ # these are the port IDs of the ports that will be merged prior to the
	+ # traffic being distributed to the streams.
	+ #
	+ # When hardware-bypass is enabled the ports must be configured as a segment.
	+ # specify the port(s) on which upstream and downstream traffic will arrive.
	+ # This information is necessary for the hardware to properly process flows.
	+ #
	+ # When using a tap configuration one of the ports will receive inbound traffic
	+ # for the network and the other will receive outbound traffic. The two ports on a
	+ # given segment must reside on the same network adapter.
	+ #
	+ # When using a SPAN-port configuration the upstream and downstream traffic
	+ # arrives on a single port. This is configured by setting the two sides of the
	+ # segment to reference the same port. (e.g. 0-0 to configure a SPAN port on
	+ # port 0).
	+ #
	+ # port segments are specified in the form:
	+ # ports: [0-1,2-3,4-5,6-6,7-7]
	+ #
	+ # For legacy systems when hardware-bypass is disabled this can be specified in any
	+ # of the following ways:
	+ #
	+ # a list of individual ports (e.g. ports: [0,1,2,3])
	+ #
	+ # a range of ports (e.g. ports: [0-3])
	+ #
	+ # "all" to indicate that all ports are to be merged together
	+ # (e.g. ports: [all])
	+ #
	+ # This parameter has no effect if auto-config is disabled.
	+ #
	+ ports: [0-1,2-3]
	+
	+ # When auto-config is enabled the hashmode specifies the algorithm for
	+ # determining to which stream a given packet is to be delivered.
	+ # This can be any valid Napatech NTPL hashmode command.
	+ #
	+ # The most common hashmode commands are: hash2tuple, hash2tuplesorted,
	+ # hash5tuple, hash5tuplesorted and roundrobin.
	+ #
	+ # See Napatech NTPL documentation other hashmodes and details on their use.
	+ #
	+ # This parameter has no effect if auto-config is disabled.
	+ #
	+ hashmode: hash5tuplesorted
	+
	+##
	+## Configure Suricata to load Suricata-Update managed rules.
	+##
	+
	+# As VyOS leverages suricata-update, the default rule path points to the
	+# generated rules instead of the built-in rules.
	+#
	+# default-rule-path: /etc/suricata/rules
	+default-rule-path: /var/lib/suricata/rules
	+
	+rule-files:
	+ - suricata.rules
	+
	+##
	+## Auxiliary configuration files.
	+##
	+
	+# As VyOS leverages suricata-update, the classification file points to the
	+# generated classification instead of the built-in one.
	+#
	+# classification-file: /etc/suricata/classification.config
	+classification-file: /var/lib/suricata/rules/classification.config
	+reference-config-file: /etc/suricata/reference.config
	+# threshold-file: /etc/suricata/threshold.config
	+
	+##
	+## Include other configs
	+##
	+
	+# Includes: Files included here will be handled as if they were in-lined
	+# in this configuration file. Files with relative pathnames will be
	+# searched for in the same directory as this configuration file. You may
	+# use absolute pathnames too.
	+# You can specify more than 2 configuration files, if needed.
	+#include: include1.yaml
	+#include: include2.yaml
	diff --git a/data/templates/ids/suricata_logrotate.j2 b/data/templates/ids/suricata_logrotate.j2
	new file mode 100644
	index 000000000..62773fc68
	--- /dev/null
	+++ b/data/templates/ids/suricata_logrotate.j2
	@@ -0,0 +1,17 @@
	+{% for filename in [(log.eve.filename \| default("eve.json"))] %}
	+{{ filename if filename.startswith("/") else ("/var/log/suricata/" + filename) }}
	+{% endfor %}{
	+ weekly
	+ dateext
	+ dateformat _%Y-%m-%d_%H-%M-%S
	+ maxsize 10M
	+ rotate 10
	+ missingok
	+ nocompress
	+ nocreate
	+ nomail
	+ sharedscripts
	+ postrotate
	+ /bin/kill -HUP `cat /run/suricata/suricata.pid 2>/dev/null` 2>/dev/null \|\| true
	+ endscript
	+}
	diff --git a/debian/control b/debian/control
	index 329ed09eb..2e99bdc28 100644
	--- a/debian/control
	+++ b/debian/control
	@@ -1,339 +1,341 @@
	Source: vyos-1x
	Section: contrib/net
	Priority: extra
	Maintainer: VyOS Package Maintainers <maintainers@vyos.net>
	Build-Depends:
	debhelper (>= 9),
	dh-python,
	fakeroot,
	gcc,
	iproute2,
	libvyosconfig0 (>= 0.0.7),
	libzmq3-dev,
	procps,
	python3 (>= 3.10),
	# For QA
	pylint,
	# For generating command definitions
	python3-lxml,
	python3-xmltodict,
	# For running tests
	python3-coverage,
	python3-netifaces,
	python3-nose,
	python3-jinja2,
	python3-psutil,
	python3-requests,
	python3-setuptools,
	quilt,
	whois
	Standards-Version: 3.9.6

	Package: vyos-1x
	Architecture: amd64 arm64
	Pre-Depends:
	libnss-tacplus [amd64],
	libpam-tacplus [amd64],
	libpam-radius-auth [amd64]
	Depends:
	## Fundamentals
	${python3:Depends} (>= 3.10),
	libvyosconfig0,
	vyatta-bash,
	vyatta-cfg,
	vyos-http-api-tools,
	vyos-utils,
	## End of Fundamentals
	## Python libraries used in multiple modules and scripts
	python3,
	python3-cryptography,
	python3-hurry.filesize,
	python3-inotify,
	python3-jinja2,
	python3-jmespath,
	python3-netaddr,
	python3-netifaces,
	python3-paramiko,
	python3-passlib,
	python3-psutil,
	python3-pyhumps,
	python3-pystache,
	python3-pyudev,
	python3-six,
	python3-tabulate,
	python3-voluptuous,
	python3-xmltodict,
	python3-zmq,
	## End of Python libraries
	## Basic System services and utilities
	sudo,
	systemd,
	bsdmainutils,
	openssl,
	curl,
	dbus,
	file,
	iproute2 (>= 6.0.0),
	linux-cpupower,
	# ipaddrcheck is widely used in IP value validators
	ipaddrcheck,
	ethtool,
	fdisk,
	lm-sensors,
	procps,
	netplug,
	sed,
	ssl-cert,
	tuned,
	beep,
	wide-dhcpv6-client,
	# Generic colorizer
	grc,
	## End of System services and utilities
	## For the installer
	# Image signature verification tool
	minisign,
	# Live filesystem tools
	squashfs-tools,
	fuse-overlayfs,
	## End installer
	auditd,
	iputils-arping,
	isc-dhcp-client,
	# For "vpn pptp", "vpn l2tp", "vpn sstp", "service ipoe-server"
	accel-ppp,
	# End "vpn pptp", "vpn l2tp", "vpn sstp", "service ipoe-server"
	avahi-daemon,
	conntrack,
	conntrackd,
	## Conf mode features
	# For "interfaces wireless"
	hostapd,
	hsflowd,
	iw,
	wireless-regdb,
	wpasupplicant (>= 0.6.7),
	# End "interfaces wireless"
	# For "interfaces wwan"
	modemmanager,
	usb-modeswitch,
	libqmi-utils,
	# End "interfaces wwan"
	# For "interfaces openvpn"
	openvpn,
	openvpn-auth-ldap,
	openvpn-auth-radius,
	openvpn-otp,
	libpam-google-authenticator,
	# End "interfaces openvpn"
	# For "interfaces wireguard"
	wireguard-tools,
	qrencode,
	# End "interfaces wireguard"
	# For "interfaces pppoe"
	pppoe,
	# End "interfaces pppoe"
	# For "interfaces sstpc"
	sstp-client,
	# End "interfaces sstpc"
	# For "protocols *"
	frr (>= 7.5),
	frr-pythontools,
	frr-rpki-rtrlib,
	frr-snmp,
	# End "protocols *"
	# For "protocols nhrp" (part of DMVPN)
	opennhrp,
	# End "protocols nhrp"
	# For "protocols igmp-proxy"
	igmpproxy,
	# End "protocols igmp-proxy"
	# For "pki"
	certbot,
	# End "pki"
	# For "service console-server"
	conserver-client,
	conserver-server,
	console-data,
	dropbear,
	# End "service console-server"
	# For "service aws glb"
	aws-gwlbtun,
	# For "service dns dynamic"
	ddclient (>= 3.11.1),
	# End "service dns dynamic"
	# # For "service ids"
	fastnetmon [amd64],
	+ suricata,
	+ suricata-update,
	# End "service ids"
	# # For "service ndp-proxy"
	ndppd,
	# End "service ndp-proxy"
	# For "service router-advert"
	radvd,
	# End "service route-advert"
	# For "high-availability reverse-proxy"
	haproxy,
	# End "high-availability reverse-proxy"
	# For "service dhcp-relay"
	isc-dhcp-relay,
	# For "service dhcp-server"
	kea,
	# End "service dhcp-server"
	# For "service lldp"
	lldpd,
	# End "service lldp"
	# For "service https"
	nginx-light,
	# End "service https"
	# For "service ssh"
	openssh-server,
	sshguard,
	# End "service ssh"
	# For "service salt-minion"
	salt-minion,
	# End "service salt-minion"
	# For "service snmp"
	snmp,
	snmpd,
	# End "service snmp"
	# For "service webproxy"
	squid,
	squidclient,
	squidguard,
	# End "service webproxy"
	# For "service monitoring telegraf"
	telegraf (>= 1.20),
	# End "service monitoring telegraf"
	# For "service monitoring zabbix-agent"
	zabbix-agent2,
	# End "service monitoring zabbix-agent"
	# For "service tftp-server"
	tftpd-hpa,
	# End "service tftp-server"
	# For "service dns forwarding"
	pdns-recursor,
	# End "service dns forwarding"
	# For "service sla owamp"
	owamp-client,
	owamp-server,
	# End "service sla owamp"
	# For "service sla twamp"
	twamp-client,
	twamp-server,
	# End "service sla twamp"
	# For "service broadcast-relay"
	udp-broadcast-relay,
	# End "service broadcast-relay"
	# For "high-availability vrrp"
	keepalived (>=2.0.5),
	# End "high-availability-vrrp"
	# For "system task-scheduler"
	cron,
	# End "system task-scheduler"
	# For "system lcd"
	lcdproc,
	lcdproc-extra-drivers,
	# End "system lcd"
	# For "system config-management commit-archive"
	git,
	# End "system config-management commit-archive"
	# For firewall
	libndp-tools,
	libnetfilter-conntrack3,
	libnfnetlink0,
	nfct,
	nftables (>= 0.9.3),
	# For "vpn ipsec"
	strongswan (>= 5.9),
	strongswan-swanctl (>= 5.9),
	charon-systemd,
	libcharon-extra-plugins (>=5.9),
	libcharon-extauth-plugins (>=5.9),
	libstrongswan-extra-plugins (>=5.9),
	libstrongswan-standard-plugins (>=5.9),
	python3-vici (>= 5.7.2),
	# End "vpn ipsec"
	# For "nat64"
	jool,
	# End "nat64"
	# For "system conntrack modules rtsp"
	nat-rtsp,
	# End "system conntrack modules rtsp"
	# For "system ntp"
	chrony,
	# End "system ntp"
	# For "vpn openconnect"
	ocserv,
	# End "vpn openconnect"
	# For "system flow-accounting"
	pmacct (>= 1.6.0),
	# End "system flow-accounting"
	# For container
	podman,
	netavark,
	aardvark-dns,
	# iptables is only used for containers now, not the the firewall CLI
	iptables,
	# End container
	## End Configuration mode
	## Operational mode
	# Used for hypervisor model in "run show version"
	hvinfo,
	# For "run traceroute"
	traceroute,
	# For "run monitor traffic"
	tcpdump,
	# End "run monitor traffic"
	# For "show hardware dmi"
	dmidecode,
	# For "run show hardware storage smart"
	smartmontools,
	# For "run show hardware scsi"
	lsscsi,
	# For "run show hardware pci"
	pciutils,
	# For "show hardware usb"
	usbutils,
	# For "run show hardware storage nvme"
	nvme-cli,
	# For "run monitor bandwidth-test"
	iperf,
	iperf3,
	# End "run monitor bandwidth-test"
	# For "run wake-on-lan"
	etherwake,
	# For "run force ipv6-nd"
	ndisc6,
	# For "run monitor bandwidth"
	bmon,
	# End Operational mode
	## TPM tools
	cryptsetup,
	tpm2-tools,
	## End TPM tools
	## Optional utilities
	easy-rsa,
	tcptraceroute,
	mtr-tiny,
	telnet,
	stunnel4,
	uidmap
	## End optional utilities
	Description: VyOS configuration scripts and data
	VyOS configuration scripts, interface definitions, and everything

	Package: vyos-1x-vmware
	Architecture: amd64
	Depends:
	vyos-1x,
	open-vm-tools
	Description: VyOS configuration scripts and data for VMware
	Adds configuration files required for VyOS running on VMware hosts.

	Package: vyos-1x-smoketest
	Architecture: all
	Depends:
	skopeo,
	snmp,
	vyos-1x
	Description: VyOS build sanity checking toolkit
	diff --git a/interface-definitions/service_suricata.xml.in b/interface-definitions/service_suricata.xml.in
	new file mode 100644
	index 000000000..e0159e2ba
	--- /dev/null
	+++ b/interface-definitions/service_suricata.xml.in
	@@ -0,0 +1,238 @@
	+<?xml version="1.0"?>
	+<interfaceDefinition>
	+ <node name="service">
	+ <children>
	+ <node name="suricata" owner="${vyos_conf_scripts_dir}/service_suricata.py">
	+ <properties>
	+ <help>Network IDS, IPS and Security Monitoring</help>
	+ <priority>740</priority>
	+ </properties>
	+ <children>
	+ #include <include/generic-interface-multi.xml.i>
	+ <tagNode name="address-group">
	+ <properties>
	+ <help>Address group name</help>
	+ <constraint>
	+ <regex>[a-z0-9-]+</regex>
	+ </constraint>
	+ </properties>
	+ <children>
	+ <leafNode name="address">
	+ <properties>
	+ <help>IP address or subnet</help>
	+ <valueHelp>
	+ <format>ipv4</format>
	+ <description>IPv4 address to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>ipv6</format>
	+ <description>IPv6 address to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>ipv4net</format>
	+ <description>IPv4 prefix to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>ipv6net</format>
	+ <description>IPv6 prefix to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!ipv4</format>
	+ <description>Exclude the specified IPv4 address from matches</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!ipv6</format>
	+ <description>Exclude the specified IPv6 address from matches</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!ipv4net</format>
	+ <description>Exclude the specified IPv6 prefix from matches</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!ipv6net</format>
	+ <description>Exclude the specified IPv6 prefix from matches</description>
	+ </valueHelp>
	+ <constraint>
	+ <validator name="ipv4-address"/>
	+ <validator name="ipv6-address"/>
	+ <validator name="ipv4-prefix"/>
	+ <validator name="ipv6-prefix"/>
	+ <validator name="ipv4-address-exclude"/>
	+ <validator name="ipv6-address-exclude"/>
	+ <validator name="ipv4-prefix-exclude"/>
	+ <validator name="ipv6-prefix-exclude"/>
	+ </constraint>
	+ <multi/>
	+ </properties>
	+ </leafNode>
	+ <leafNode name="group">
	+ <properties>
	+ <help>Address group</help>
	+ <completionHelp>
	+ <path>service ids suricata address-group</path>
	+ </completionHelp>
	+ <valueHelp>
	+ <format>txt</format>
	+ <description>Address group to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!txt</format>
	+ <description>Exclude the specified address group from matches</description>
	+ </valueHelp>
	+ <constraint>
	+ <regex>!?[a-z0-9-]+</regex>
	+ </constraint>
	+ <multi/>
	+ </properties>
	+ </leafNode>
	+ </children>
	+ </tagNode>
	+ <tagNode name="port-group">
	+ <properties>
	+ <help>Port group name</help>
	+ <constraint>
	+ <regex>[a-z0-9-]+</regex>
	+ </constraint>
	+ </properties>
	+ <children>
	+ <leafNode name="port">
	+ <properties>
	+ <help>Port number</help>
	+ <valueHelp>
	+ <format>u32:1-65535</format>
	+ <description>Numeric port to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!u32:1-65535</format>
	+ <description>Numeric port to exclude from matches</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>start-end</format>
	+ <description>Numbered port range (e.g. 1001-1005) to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!start-end</format>
	+ <description>Numbered port range (e.g. !1001-1005) to exclude from matches</description>
	+ </valueHelp>
	+ <constraint>
	+ <validator name="port-range"/>
	+ <validator name="port-range-exclude"/>
	+ </constraint>
	+ <multi/>
	+ </properties>
	+ </leafNode>
	+ <leafNode name="group">
	+ <properties>
	+ <help>Port group</help>
	+ <completionHelp>
	+ <path>service ids suricata port-group</path>
	+ </completionHelp>
	+ <valueHelp>
	+ <format>txt</format>
	+ <description>Port group to match</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>!txt</format>
	+ <description>Exclude the specified port group from matches</description>
	+ </valueHelp>
	+ <constraint>
	+ <regex>!?[a-z0-9-]+</regex>
	+ </constraint>
	+ <multi/>
	+ </properties>
	+ </leafNode>
	+ </children>
	+ </tagNode>
	+ <node name="log">
	+ <properties>
	+ <help>Suricata log outputs</help>
	+ </properties>
	+ <children>
	+ <node name="eve">
	+ <properties>
	+ <help>Extensible Event Format (EVE)</help>
	+ </properties>
	+ <children>
	+ <leafNode name="filetype">
	+ <properties>
	+ <help>EVE logging destination</help>
	+ <completionHelp>
	+ <list>regular syslog</list>
	+ </completionHelp>
	+ <valueHelp>
	+ <format>regular</format>
	+ <description>Log to filename</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>syslog</format>
	+ <description>Log to syslog</description>
	+ </valueHelp>
	+ <constraint>
	+ <regex>(regular\|syslog)</regex>
	+ </constraint>
	+ </properties>
	+ <defaultValue>regular</defaultValue>
	+ </leafNode>
	+ <leafNode name="filename">
	+ <properties>
	+ <help>Log file</help>
	+ <valueHelp>
	+ <format>filename</format>
	+ <description>File name in default Suricata log directory</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>/path</format>
	+ <description>Absolute file path</description>
	+ </valueHelp>
	+ </properties>
	+ <defaultValue>eve.json</defaultValue>
	+ </leafNode>
	+ <leafNode name="type">
	+ <properties>
	+ <help>Log types</help>
	+ <completionHelp>
	+ <list>alert anomaly drop files http dns tls smtp dnp3 ftp rdp nfs smb tftp ikev2 dcerpc krb5 snmp rfb sip dhcp ssh mqtt http2 flow netflow</list>
	+ </completionHelp>
	+ <valueHelp>
	+ <format>alert</format>
	+ <description>Record events for rule matches</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>anomaly</format>
	+ <description>Record unexpected conditions such as truncated packets, packets with invalid IP/UDP/TCP length values, and other events that render the packet invalid for further processing or describe unexpected behavior on an established stream</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>drop</format>
	+ <description>Record events for dropped packets</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>file</format>
	+ <description>Record file details (e.g., MD5) for files extracted from application protocols (e.g., HTTP)</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>application (http, dns, tls, ...)</format>
	+ <description>Record application-level transactions</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>flow</format>
	+ <description>Record bi-directional flows</description>
	+ </valueHelp>
	+ <valueHelp>
	+ <format>netflow</format>
	+ <description>Record uni-directional flows</description>
	+ </valueHelp>
	+ <constraint>
	+ <regex>(alert\|anomaly\|http\|dns\|tls\|files\|drop\|smtp\|dnp3\|ftp\|rdp\|nfs\|smb\|tftp\|ikev2\|dcerpc\|krb5\|snmp\|rfb\|sip\|dhcp\|ssh\|mqtt\|http2\|flow\|netflow)</regex>
	+ </constraint>
	+ <multi/>
	+ </properties>
	+ </leafNode>
	+ </children>
	+ </node>
	+ </children>
	+ </node>
	+ </children>
	+ </node>
	+ </children>
	+ </node>
	+</interfaceDefinition>
	diff --git a/op-mode-definitions/suricata.xml.in b/op-mode-definitions/suricata.xml.in
	new file mode 100644
	index 000000000..a5025afba
	--- /dev/null
	+++ b/op-mode-definitions/suricata.xml.in
	@@ -0,0 +1,23 @@
	+<?xml version="1.0"?>
	+<interfaceDefinition>
	+ <node name="update">
	+ <children>
	+ <node name="suricata">
	+ <properties>
	+ <help>Update Suricata</help>
	+ </properties>
	+ <command>if test -f /run/suricata/suricata.yaml; then sudo suricata-update --suricata-conf /run/suricata/suricata.yaml; sudo systemctl restart suricata; else echo "Service Suricata not configured"; fi </command>
	+ </node>
	+ </children>
	+ </node>
	+ <node name="restart">
	+ <children>
	+ <node name="suricata">
	+ <properties>
	+ <help>Restart Suricata service</help>
	+ </properties>
	+ <command>if systemctl is-active --quiet suricata; then sudo systemctl restart suricata.service; else echo "Service Suricata not configured"; fi</command>
	+ </node>
	+ </children>
	+ </node>
	+</interfaceDefinition>
	diff --git a/python/vyos/base.py b/python/vyos/base.py
	index 9b93cb2f2..054b1d837 100644
	--- a/python/vyos/base.py
	+++ b/python/vyos/base.py
	@@ -1,65 +1,65 @@
	# Copyright 2018-2022 VyOS maintainers and contributors <maintainers@vyos.io>
	#
	# This library is free software; you can redistribute it and/or
	# modify it under the terms of the GNU Lesser General Public
	# License as published by the Free Software Foundation; either
	# version 2.1 of the License, or (at your option) any later version.
	#
	# This library is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	# Lesser General Public License for more details.
	#
	# You should have received a copy of the GNU Lesser General Public
	# License along with this library. If not, see <http://www.gnu.org/licenses/>.

	from textwrap import fill


	class BaseWarning:
	def __init__(self, header, message, **kwargs):
	self.message = message
	self.kwargs = kwargs
	if 'width' not in kwargs:
	self.width = 72
	if 'initial_indent' in kwargs:
	del self.kwargs['initial_indent']
	if 'subsequent_indent' in kwargs:
	del self.kwargs['subsequent_indent']
	self.textinitindent = header
	self.standardindent = ''

	def print(self):
	messages = self.message.split('\n')
	isfirstmessage = True
	initial_indent = self.textinitindent
	print('')
	for mes in messages:
	mes = fill(mes, initial_indent=initial_indent,
	subsequent_indent=self.standardindent, **self.kwargs)
	if isfirstmessage:
	isfirstmessage = False
	initial_indent = self.standardindent
	print(f'{mes}')
	- print('')
	+ print('', flush=True)


	class Warning():
	def __init__(self, message, **kwargs):
	self.BaseWarn = BaseWarning('WARNING: ', message, **kwargs)
	self.BaseWarn.print()


	class DeprecationWarning():
	def __init__(self, message, **kwargs):
	# Reformat the message and trim it to 72 characters in length
	self.BaseWarn = BaseWarning('DEPRECATION WARNING: ', message, **kwargs)
	self.BaseWarn.print()


	class ConfigError(Exception):
	def __init__(self, message):
	# Reformat the message and trim it to 72 characters in length
	message = fill(message, width=72)
	# Call the base class constructor with the parameters it needs
	super().__init__(message)
	diff --git a/src/conf_mode/service_suricata.py b/src/conf_mode/service_suricata.py
	new file mode 100755
	index 000000000..69b369e0b
	--- /dev/null
	+++ b/src/conf_mode/service_suricata.py
	@@ -0,0 +1,161 @@
	+#!/usr/bin/env python3
	+#
	+# Copyright (C) 2024 VyOS maintainers and contributors
	+#
	+# This program is free software; you can redistribute it and/or modify
	+# it under the terms of the GNU General Public License version 2 or later as
	+# published by the Free Software Foundation.
	+#
	+# This program is distributed in the hope that it will be useful,
	+# but WITHOUT ANY WARRANTY; without even the implied warranty of
	+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	+# GNU General Public License for more details.
	+#
	+# You should have received a copy of the GNU General Public License
	+# along with this program. If not, see <http://www.gnu.org/licenses/>.
	+
	+import os
	+
	+from sys import exit
	+
	+from vyos.base import Warning
	+from vyos.config import Config
	+from vyos.template import render
	+from vyos.utils.process import call
	+from vyos import ConfigError
	+from vyos import airbag
	+airbag.enable()
	+
	+config_file = '/run/suricata/suricata.yaml'
	+rotate_file = '/etc/logrotate.d/suricata'
	+
	+def get_config(config=None):
	+ if config:
	+ conf = config
	+ else:
	+ conf = Config()
	+ base = ['service', 'suricata']
	+
	+ if not conf.exists(base):
	+ return None
	+
	+ suricata = conf.get_config_dict(base, key_mangling=('-', '_'),
	+ get_first_key=True, with_recursive_defaults=True)
	+
	+ return suricata
	+
	+# https://en.wikipedia.org/wiki/Topological_sorting#Depth-first_search
	+def topological_sort(source):
	+ sorted_nodes = []
	+ permanent_marks = set()
	+ temporary_marks = set()
	+
	+ def visit(n, v):
	+ if n in permanent_marks:
	+ return
	+ if n in temporary_marks:
	+ raise ConfigError('At least one cycle exists in the referenced groups')
	+
	+ temporary_marks.add(n)
	+
	+ for m in v.get('group', []):
	+ m = m.lstrip('!')
	+ if m not in source:
	+ raise ConfigError(f'Undefined referenced group "{m}"')
	+ visit(m, source[m])
	+
	+ temporary_marks.remove(n)
	+ permanent_marks.add(n)
	+ sorted_nodes.append((n, v))
	+
	+ while len(permanent_marks) < len(source):
	+ n = next(n for n in source.keys() if n not in permanent_marks)
	+ visit(n, source[n])
	+
	+ return sorted_nodes
	+
	+def verify(suricata):
	+ if not suricata:
	+ return None
	+
	+ if 'interface' not in suricata:
	+ raise ConfigError('No interfaces configured!')
	+
	+ if 'address_group' not in suricata:
	+ raise ConfigError('No address-group configured!')
	+
	+ if 'port_group' not in suricata:
	+ raise ConfigError('No port-group configured!')
	+
	+ try:
	+ topological_sort(suricata['address_group'])
	+ except (ConfigError,StopIteration) as e:
	+ raise ConfigError(f'Invalid address-group: {e}')
	+
	+ try:
	+ topological_sort(suricata['port_group'])
	+ except (ConfigError,StopIteration) as e:
	+ raise ConfigError(f'Invalid port-group: {e}')
	+
	+def generate(suricata):
	+ if not suricata:
	+ for file in [config_file, rotate_file]:
	+ if os.path.isfile(file):
	+ os.unlink(file)
	+
	+ return None
	+
	+ # Config-related formatters
	+ def to_var(s:str):
	+ return s.replace('-','_').upper()
	+
	+ def to_val(s:str):
	+ return s.replace('-',':')
	+
	+ def to_ref(s:str):
	+ if s[0] == '!':
	+ return '!$' + to_var(s[1:])
	+ return '$' + to_var(s)
	+
	+ def to_config(kind:str):
	+ def format_group(group):
	+ (name, value) = group
	+ property = [to_val(property) for property in value.get(kind,[])]
	+ group = [to_ref(group) for group in value.get('group',[])]
	+ return (to_var(name), property + group)
	+ return format_group
	+
	+ # Format the address group
	+ suricata['address_group'] = map(to_config('address'),
	+ topological_sort(suricata['address_group']))
	+
	+ # Format the port group
	+ suricata['port_group'] = map(to_config('port'),
	+ topological_sort(suricata['port_group']))
	+
	+ render(config_file, 'ids/suricata.j2', {'suricata': suricata})
	+ render(rotate_file, 'ids/suricata_logrotate.j2', suricata)
	+ return None
	+
	+def apply(suricata):
	+ systemd_service = 'suricata.service'
	+ if not suricata or 'interface' not in suricata:
	+ # Stop suricata service if removed
	+ call(f'systemctl stop {systemd_service}')
	+ else:
	+ Warning('To fetch the latest rules, use "update suricata"; '
	+ 'To periodically fetch the latest rules, '
	+ 'use the task scheduler!')
	+ call(f'systemctl restart {systemd_service}')
	+
	+ return None
	+
	+if __name__ == '__main__':
	+ try:
	+ c = get_config()
	+ verify(c)
	+ generate(c)
	+ apply(c)
	+ except ConfigError as e:
	+ print(e)
	+ exit(1)
	diff --git a/src/etc/systemd/system/suricata.service.d/10-override.conf b/src/etc/systemd/system/suricata.service.d/10-override.conf
	new file mode 100644
	index 000000000..781256cf5
	--- /dev/null
	+++ b/src/etc/systemd/system/suricata.service.d/10-override.conf
	@@ -0,0 +1,9 @@
	+[Service]
	+ExecStart=
	+ExecStart=/usr/bin/suricata -D --af-packet -c /run/suricata/suricata.yaml --pidfile /run/suricata/suricata.pid
	+PIDFile=
	+PIDFile=/run/suricata/suricata.pid
	+ExecReload=
	+ExecReload=/usr/bin/suricatasc -c reload-rules /run/suricata/suricata.socket ; /bin/kill -HUP $MAINPID
	+ExecStop=
	+ExecStop=/usr/bin/suricatasc -c shutdown /run/suricata/suricata.socket
	diff --git a/src/validators/port-range-exclude b/src/validators/port-range-exclude
	new file mode 100755
	index 000000000..4c049e98f
	--- /dev/null
	+++ b/src/validators/port-range-exclude
	@@ -0,0 +1,7 @@
	+#!/bin/sh
	+arg="$1"
	+if [ "${arg:0:1}" != "!" ]; then
	+ exit 1
	+fi
	+path=$(dirname "$0")
	+${path}/port-range "${arg:1}"

File Metadata

Mime Type: text/x-diff
Expires: Sat, Oct 17, 12:02 AM (16 h, 24 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 4416399
Default Alt Text: (74 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions