Hello,
I have been using policy routing with ipv6 for a while, but I can no longer get it to work. There has been a lot of commits regarding policy routing lately. Might be due to that?
Unfortunately I don't know at which commit it stopped working.
My config is:
```
# show interfaces ethernet eth2
address 172.21.50.111/23
address 2c06:25:f1cd:11:1::1/80
hw-id f6:29:d0:f0:2f:0c
policy {
route6 src-route
}
# show policy
route6 src-route {
rule 1 {
destination {
address ::/0
}
set {
table 1
}
source {
address 2c06:25:f1cd:11:1::/80
}
}
}
# show nat66
source {
rule 1 {
outbound-interface wg01
source {
prefix 2c06:25:f1cd:11:1::/80
}
translation {
address masquerade
}
}
}
# show protocols static table 1
route6 ::/0 {
interface wg01 {
}
}
```
I cannot get it working on ipv6 despite the same config worked a while back. From a client, ping6 and traceroute6 just times out.
(ipv4 pbr works fine via the same tunnel and table)
It does also work locally on vyos with the wg01 tunnel via table 1 if I use local-route6.
Any ideas?