op-mode run show interfaces vpp missing ipv6 address
**show interfaces vpp / show interfaces vpp dataplane** miss ipv6 address
```
vyos@vyos# run show interfaces vpp
Kernel Dataplane Type IP Address MAC MTU State
------------ ----------------- -------- ---------------- ----------------- ----- -------
BondEthernet0 bond 00:11:22:33:44:55 9000 up
BondEthernet0.100 bond 192.168.100.1/24 00:00:00:00:00:00 1500 up
BondEthernet0.200 bond 00:00:00:00:00:00 1500 up
eth1 dpdk 192.168.1.1/24 00:11:22:33:44:55 1500 up
eth2 dpdk 00:11:22:33:44:55 1500 up
gre1 GRE 00:00:00:00:00:00 9000 up
gre2 GRE d0:0b:ee:d0:00:00 9000 up
gre3 GRE d0:0b:ee:d0:00:01 9000 up
gre4 GRE 00:00:00:00:00:00 9000 up
local0 local 00:00:00:00:00:00 0 down
loop0 Loopback 10.255.0.1/32 de:ad:00:00:00:00 9000 up
loop0.0 Loopback 192.168.0.1/24 00:00:00:00:00:00 1500 up
loop0.10 Loopback 00:00:00:00:00:00 9000 up
eth1 tap4096 virtio 02:fe:10:b9:45:b5 1500 up
eth2 tap4097 virtio 02:fe:44:a7:0b:62 1500 up
vppbond0 tap4098 virtio 02:fe:3d:e9:32:5c 9000 up
vppbond0.100 tap4098.100 virtio 00:00:00:00:00:00 0 up
vppbond0.200 tap4098.200 virtio 00:00:00:00:00:00 0 up
vppgre1 tun4102 virtio 00:00:00:00:00:00 9000 up
vppgre2 tun4100 virtio 00:00:00:00:00:00 9000 up
vppgre3 tun4101 virtio 00:00:00:00:00:00 9000 up
vppgre4 tun4103 virtio 00:00:00:00:00:00 9000 up
vpplo0 tap4099 virtio 02:fe:3d:74:8f:e3 9000 up
vpplo0.0 tap4099.0 virtio 00:00:00:00:00:00 0 up
vpplo0.10 tap4099.10 virtio 00:00:00:00:00:00 0 up
[edit]
```
**run show interfaces** noraml bihaviour
```
vyos@vyos# run show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address MAC VRF MTU S/L Description
------------ ------------------ ----------------- ------- ----- ----- -----------------
eth0 192.168.0.224/24 08:00:27:ad:ab:8b default 1500 u/u
eth1 192.168.1.1/24 08:00:27:77:a9:ae default 1500 u/u
eth2 2001:db8::1/64 08:00:27:59:7a:0f default 1500 u/u
lo 127.0.0.1/8 00:00:00:00:00:00 default 65536 u/u
::1/128
vpplo0 10.255.0.1/32 de:ad:00:00:00:00 default 9000 u/u Loopback with vif
2001:db8:2::1/64
vppbond0 2001:db8:1::1/64 00:11:22:33:44:55 default 1500 u/u Broadcast bond
vpplo0.0 192.168.0.1/24 de:ad:00:00:00:00 default 1500 u/u Loopback vif 0
vpplo0.10 2001:db8::1/64 de:ad:00:00:00:00 default 9000 u/u Loopback vif 10
vppbond0.100 192.168.100.1/24 00:11:22:33:44:55 default 1500 u/u VLAN 100
vppbond0.200 2001:db8:200::1/64 00:11:22:33:44:55 default 1500 u/u VLAN 200
vppgre1 - n/a default 9000 u/u GRE L3 with key
vppgre2 - n/a default 9000 u/u GRE TEB with key
vppgre3 - n/a default 9000 u/u GRE ERSPAN
vppgre4 - n/a default 9000 u/u GRE IPv6 with key
[edit]
```
**vppctl** as proof of original source data
```
vyos@vyos# vppctl show interface address
BondEthernet0 (up):
L3 2001:db8:1::1/64
BondEthernet0.200 (up):
L3 2001:db8:200::1/64
BondEthernet0.100 (up):
L3 192.168.100.1/24
eth1 (up):
L3 192.168.1.1/24
eth2 (up):
gre1 (up):
gre2 (up):
gre3 (up):
gre4 (up):
local0 (dn):
loop0 (up):
L3 10.255.0.1/32
L3 2001:db8:2::1/64
loop0.0 (up):
L3 192.168.0.1/24
loop0.10 (up):
L3 2001:db8::1/64
tap4096 (up):
tap4097 (up):
tap4098 (up):
tap4098.100 (up):
tap4098.200 (up):
tap4099.0 (up):
tap4099 (up):
tap4099.10 (up):
tun4100 (up):
tun4101 (up):
tun4102 (up):
tun4103 (up):
```