**The vxlan interface is missing after reboot.**
Running configuration works, but after rebooting the device, vxlan config is missing.
user@vyos-410-1# run show version
No hypervisor detected
Version: VyOS 999.lithium.06080013
Description: 999.lithium.06080013
Copyright: 2016 VyOS maintainers and contributors
Built by:
[email protected]
Built on: Wed Jun 8 00:13:41 UTC 2016
Build ID: 1606080013-2c03c9d
System type: x86 64-bit
Boot via: image
HW model: PowerEdge R410
HW S/N: XXX
HW UUID: 44454C4C-4D00-1054-804B-B7C04F32354A
Uptime: 14:36:57 up 1 day, 22:39, 2 users, load average: 0.15, 0.10, 0.07
**Configuration:**
set interfaces vxlan vxlan4 bridge-group bridge 'br4'
set interfaces vxlan vxlan4 link 'vti0'
set interfaces vxlan vxlan4 remote '2.2.2.2'
set interfaces vxlan vxlan4 vni '4'
**WORKAROUND - manual after reboot**
vyos@vyos-410-1# sudo bash
root@vyos-410-1:/home/vyos# cd /tmp/
root@vyos-410-1:/tmp# ls -al
total 4
drwxrwxrwt 2 root root 80 Aug 24 14:40 .
drwxr-xr-x 1 root root 4096 Aug 24 14:36 ..
-rw-rw-r-- 1 root vyattacfg 0 Aug 24 14:36 vxlan-vxlan4-create
root@vyos-410-1:/tmp#
root@vyos-410-1:/tmp# rm -f /tmp/vxlan-vxlan*
root@vyos-410-1:/tmp# exit
**show bridge - No vxlan interface attached**
vyos@vyos-410-1# run show bridge
bridge name bridge id STP enabled interfaces
br4 8000.0024e863f3a4 no eth1.4
Thank you!