diff --git a/data/templates/frr/ospfd.frr.j2 b/data/templates/frr/ospfd.frr.j2
index 882ec8f97..0baff2d72 100644
--- a/data/templates/frr/ospfd.frr.j2
+++ b/data/templates/frr/ospfd.frr.j2
@@ -1,217 +1,217 @@
!
{% if interface is vyos_defined %}
{% for iface, iface_config in interface.items() %}
interface {{ iface }}
{% if iface_config.authentication.plaintext_password is vyos_defined %}
ip ospf authentication-key {{ iface_config.authentication.plaintext_password }}
{% elif iface_config.authentication.md5 is vyos_defined %}
ip ospf authentication message-digest
{% if iface_config.authentication.md5.key_id is vyos_defined %}
{% for key, key_config in iface_config.authentication.md5.key_id.items() %}
ip ospf message-digest-key {{ key }} md5 {{ key_config.md5_key }}
{% endfor %}
{% endif %}
{% endif %}
{% if iface_config.area is vyos_defined %}
ip ospf area {{ iface_config.area }}
{% endif %}
{% if iface_config.bandwidth is vyos_defined %}
bandwidth {{ iface_config.bandwidth }}
{% endif %}
{% if iface_config.cost is vyos_defined %}
ip ospf cost {{ iface_config.cost }}
{% endif %}
{% if iface_config.priority is vyos_defined %}
ip ospf priority {{ iface_config.priority }}
{% endif %}
{% if iface_config.hello_interval is vyos_defined %}
ip ospf hello-interval {{ iface_config.hello_interval }}
{% endif %}
{% if iface_config.retransmit_interval is vyos_defined %}
ip ospf retransmit-interval {{ iface_config.retransmit_interval }}
{% endif %}
{% if iface_config.transmit_delay is vyos_defined %}
ip ospf transmit-delay {{ iface_config.transmit_delay }}
{% endif %}
{% if iface_config.dead_interval is vyos_defined %}
ip ospf dead-interval {{ iface_config.dead_interval }}
{% elif iface_config.hello_multiplier is vyos_defined %}
ip ospf dead-interval minimal hello-multiplier {{ iface_config.hello_multiplier }}
{% endif %}
{% if iface_config.bfd is vyos_defined %}
ip ospf bfd
{% endif %}
{% if iface_config.bfd.profile is vyos_defined %}
ip ospf bfd profile {{ iface_config.bfd.profile }}
{% endif %}
{% if iface_config.mtu_ignore is vyos_defined %}
ip ospf mtu-ignore
{% endif %}
{% if iface_config.network is vyos_defined %}
ip ospf network {{ iface_config.network }}
{% endif %}
{% if iface_config.passive is vyos_defined %}
{{ 'no ' if iface_config.passive.disable is vyos_defined }}ip ospf passive
{% endif %}
exit
!
{% endfor %}
{% endif %}
!
router ospf {{ 'vrf ' ~ vrf if vrf is vyos_defined }}
{% if access_list is vyos_defined %}
{% for acl, acl_config in access_list.items() %}
{% for protocol in acl_config.export if acl_config.export is vyos_defined %}
distribute-list {{ acl }} out {{ protocol }}
{% endfor %}
{% endfor %}
{% endif %}
{% if area is vyos_defined %}
{% for area_id, area_config in area.items() %}
{% if area_config.area_type is vyos_defined %}
{% for type, type_config in area_config.area_type.items() if type != 'normal' %}
area {{ area_id }} {{ type }} {{ 'no-summary' if type_config.no_summary is vyos_defined }}
{% if type_config.default_cost is vyos_defined %}
area {{ area_id }} default-cost {{ type_config.default_cost }}
{% endif %}
{% endfor %}
{% endif %}
{% if area_config.authentication is vyos_defined %}
area {{ area_id }} authentication {{ 'message-digest' if area_config.authentication is vyos_defined('md5') }}
{% endif %}
{% for network in area_config.network if area_config.network is vyos_defined %}
network {{ network }} area {{ area_id }}
{% endfor %}
{% if area_config.range is vyos_defined %}
{% for range, range_config in area_config.range.items() %}
{% if range_config.cost is vyos_defined %}
area {{ area_id }} range {{ range }} cost {{ range_config.cost }}
{% endif %}
{% if range_config.not_advertise is vyos_defined %}
area {{ area_id }} range {{ range }} not-advertise
{% endif %}
{% if range_config.substitute is vyos_defined %}
area {{ area_id }} range {{ range }} substitute {{ range_config.substitute }}
{% endif %}
{% endfor %}
{% endif %}
{% if area_config.export_list is vyos_defined %}
area {{ area_id }} export-list {{ area_config.export_list }}
{% endif %}
{% if area_config.import_list is vyos_defined %}
area {{ area_id }} import-list {{ area_config.import_list }}
{% endif %}
{% if area_config.shortcut is vyos_defined %}
area {{ area_id }} shortcut {{ area_config.shortcut }}
{% endif %}
{% if area_config.virtual_link is vyos_defined %}
{% for link, link_config in area_config.virtual_link.items() %}
{% if link_config.authentication.plaintext_password is vyos_defined %}
area {{ area_id }} virtual-link {{ link }} authentication-key {{ link_config.authentication.plaintext_password }}
{% elif link_config.authentication.md5.key_id is vyos_defined %}
{% for key, key_config in link_config.authentication.md5.key_id.items() %}
area {{ area_id }} virtual-link {{ link }} message-digest-key {{ key }} md5 {{ key_config.md5_key }}
{% endfor %}
{% endif %}
{# The following values are default values #}
area {{ area_id }} virtual-link {{ link }} hello-interval {{ link_config.hello_interval }} retransmit-interval {{ link_config.retransmit_interval }} transmit-delay {{ link_config.transmit_delay }} dead-interval {{ link_config.dead_interval }}
{% endfor %}
{% endif %}
{% endfor %}
{% endif %}
{% if auto_cost.reference_bandwidth is vyos_defined %}
auto-cost reference-bandwidth {{ auto_cost.reference_bandwidth }}
{% endif %}
{% if default_information.originate is vyos_defined %}
default-information originate {{ 'always' if default_information.originate.always is vyos_defined }} {{ 'metric ' + default_information.originate.metric if default_information.originate.metric is vyos_defined }} {{ 'metric-type ' + default_information.originate.metric_type if default_information.originate.metric_type is vyos_defined }} {{ 'route-map ' + default_information.originate.route_map if default_information.originate.route_map is vyos_defined }}
{% endif %}
{% if default_metric is vyos_defined %}
default-metric {{ default_metric }}
{% endif %}
{% if maximum_paths is vyos_defined %}
maximum-paths {{ maximum_paths }}
{% endif %}
{% if distance.global is vyos_defined %}
distance {{ distance.global }}
{% endif %}
{% if distance.ospf is vyos_defined %}
distance ospf {{ 'intra-area ' + distance.ospf.intra_area if distance.ospf.intra_area is vyos_defined }} {{ 'inter-area ' + distance.ospf.inter_area if distance.ospf.inter_area is vyos_defined }} {{ 'external ' + distance.ospf.external if distance.ospf.external is vyos_defined }}
{% endif %}
{% if log_adjacency_changes is vyos_defined %}
log-adjacency-changes {{ "detail" if log_adjacency_changes.detail is vyos_defined }}
{% endif %}
{% if max_metric.router_lsa.administrative is vyos_defined %}
max-metric router-lsa administrative
{% endif %}
{% if max_metric.router_lsa.on_shutdown is vyos_defined %}
max-metric router-lsa on-shutdown {{ max_metric.router_lsa.on_shutdown }}
{% endif %}
{% if max_metric.router_lsa.on_startup is vyos_defined %}
max-metric router-lsa on-startup {{ max_metric.router_lsa.on_startup }}
{% endif %}
{% if mpls_te.enable is vyos_defined %}
mpls-te on
mpls-te router-address {{ mpls_te.router_address }}
{% endif %}
{% if neighbor is vyos_defined %}
{% for address, address_config in neighbor.items() %}
neighbor {{ address }} {{ 'priority ' + address_config.priority if address_config.priority is vyos_defined }} {{ 'poll-interval ' + address_config.poll_interval if address_config.poll_interval is vyos_defined }}
{% endfor %}
{% endif %}
{% if parameters.abr_type is vyos_defined %}
ospf abr-type {{ parameters.abr_type }}
{% endif %}
{% if parameters.opaque_lsa is vyos_defined %}
ospf opaque-lsa
{% endif %}
{% if parameters.rfc1583_compatibility is vyos_defined %}
ospf rfc1583compatibility
{% endif %}
{% if parameters.router_id is vyos_defined %}
ospf router-id {{ parameters.router_id }}
{% endif %}
-{% if passive_interface.default is vyos_defined %}
+{% if passive_interface is vyos_defined('default') %}
passive-interface default
{% endif %}
{% if redistribute is vyos_defined %}
{% for protocol, protocols_options in redistribute.items() %}
{% if protocol == 'table' %}
{% for table, table_options in protocols_options.items() %}
redistribute {{ protocol }} {{ table }} {{ 'metric ' + table_options.metric if table_options.metric is vyos_defined }} {{ 'metric-type ' + table_options.metric_type if table_options.metric_type is vyos_defined }} {{ 'route-map ' + table_options.route_map if table_options.route_map is vyos_defined }}
{% endfor %}
{% else %}
redistribute {{ protocol }} {{ 'metric ' + protocols_options.metric if protocols_options.metric is vyos_defined }} {{ 'metric-type ' + protocols_options.metric_type if protocols_options.metric_type is vyos_defined }} {{ 'route-map ' + protocols_options.route_map if protocols_options.route_map is vyos_defined }}
{% endif %}
{% endfor %}
{% endif %}
{% if refresh.timers is vyos_defined %}
refresh timer {{ refresh.timers }}
{% endif %}
{% if segment_routing is vyos_defined %}
{% if segment_routing.maximum_label_depth is vyos_defined %}
segment-routing node-msd {{ segment_routing.maximum_label_depth }}
{% endif %}
{% if segment_routing.global_block is vyos_defined %}
{% if segment_routing.local_block is vyos_defined %}
segment-routing global-block {{ segment_routing.global_block.low_label_value }} {{ segment_routing.global_block.high_label_value }} local-block {{ segment_routing.local_block.low_label_value }} {{ segment_routing.local_block.high_label_value }}
{% else %}
segment-routing global-block {{ segment_routing.global_block.low_label_value }} {{ segment_routing.global_block.high_label_value }}
{% endif %}
{% endif %}
{% if segment_routing.prefix is vyos_defined %}
{% for prefix, prefix_config in segment_routing.prefix.items() %}
{% if prefix_config.index is vyos_defined %}
{% if prefix_config.index.value is vyos_defined %}
segment-routing prefix {{ prefix }} index {{ prefix_config.index.value }} {{ 'explicit-null' if prefix_config.index.explicit_null is vyos_defined }} {{ 'no-php-flag' if prefix_config.index.no_php_flag is vyos_defined }}
{% endif %}
{% endif %}
{% endfor %}
{% endif %}
segment-routing on
{% endif %}
{% if timers.throttle.spf.delay is vyos_defined and timers.throttle.spf.initial_holdtime is vyos_defined and timers.throttle.spf.max_holdtime is vyos_defined %}
{# Timer values have default values #}
timers throttle spf {{ timers.throttle.spf.delay }} {{ timers.throttle.spf.initial_holdtime }} {{ timers.throttle.spf.max_holdtime }}
{% endif %}
exit
!
diff --git a/smoketest/scripts/cli/test_protocols_ospf.py b/smoketest/scripts/cli/test_protocols_ospf.py
index 339713bf6..7ffe642f2 100755
--- a/smoketest/scripts/cli/test_protocols_ospf.py
+++ b/smoketest/scripts/cli/test_protocols_ospf.py
@@ -1,424 +1,426 @@
#!/usr/bin/env python3
#
# Copyright (C) 2021-2022 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import unittest
from base_vyostest_shim import VyOSUnitTestSHIM
from vyos.configsession import ConfigSessionError
from vyos.ifconfig import Section
from vyos.util import process_named_running
PROCESS_NAME = 'ospfd'
base_path = ['protocols', 'ospf']
route_map = 'foo-bar-baz10'
class TestProtocolsOSPF(VyOSUnitTestSHIM.TestCase):
@classmethod
def setUpClass(cls):
super(TestProtocolsOSPF, cls).setUpClass()
cls.cli_set(cls, ['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit'])
cls.cli_set(cls, ['policy', 'route-map', route_map, 'rule', '20', 'action', 'permit'])
# ensure we can also run this test on a live system - so lets clean
# out the current configuration :)
cls.cli_delete(cls, base_path)
@classmethod
def tearDownClass(cls):
cls.cli_delete(cls, ['policy', 'route-map', route_map])
super(TestProtocolsOSPF, cls).tearDownClass()
def tearDown(self):
# Check for running process
self.assertTrue(process_named_running(PROCESS_NAME))
self.cli_delete(base_path)
self.cli_commit()
def test_ospf_01_defaults(self):
# commit changes
self.cli_set(base_path)
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
def test_ospf_02_simple(self):
router_id = '127.0.0.1'
abr_type = 'ibm'
bandwidth = '1000'
metric = '123'
self.cli_set(base_path + ['auto-cost', 'reference-bandwidth', bandwidth])
self.cli_set(base_path + ['parameters', 'router-id', router_id])
self.cli_set(base_path + ['parameters', 'abr-type', abr_type])
self.cli_set(base_path + ['parameters', 'opaque-lsa'])
self.cli_set(base_path + ['parameters', 'rfc1583-compatibility'])
self.cli_set(base_path + ['log-adjacency-changes', 'detail'])
self.cli_set(base_path + ['default-metric', metric])
+ self.cli_set(base_path + ['passive-interface', 'default'])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' compatible rfc1583', frrconfig)
self.assertIn(f' auto-cost reference-bandwidth {bandwidth}', frrconfig)
self.assertIn(f' ospf router-id {router_id}', frrconfig)
self.assertIn(f' ospf abr-type {abr_type}', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
self.assertIn(f' capability opaque', frrconfig)
self.assertIn(f' default-metric {metric}', frrconfig)
+ self.assertIn(f' passive-interface default', frrconfig)
def test_ospf_03_access_list(self):
acl = '100'
seq = '10'
protocols = ['bgp', 'connected', 'isis', 'kernel', 'rip', 'static']
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'action', 'permit'])
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'source', 'any'])
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'destination', 'any'])
for ptotocol in protocols:
self.cli_set(base_path + ['access-list', acl, 'export', ptotocol])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
for ptotocol in protocols:
self.assertIn(f' distribute-list {acl} out {ptotocol}', frrconfig) # defaults
self.cli_delete(['policy', 'access-list', acl])
def test_ospf_04_default_originate(self):
seq = '100'
metric = '50'
metric_type = '1'
self.cli_set(base_path + ['default-information', 'originate', 'metric', metric])
self.cli_set(base_path + ['default-information', 'originate', 'metric-type', metric_type])
self.cli_set(base_path + ['default-information', 'originate', 'route-map', route_map])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
self.assertIn(f' default-information originate metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig)
# Now set 'always'
self.cli_set(base_path + ['default-information', 'originate', 'always'])
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f' default-information originate always metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig)
def test_ospf_05_options(self):
global_distance = '128'
intra_area = '100'
inter_area = '110'
external = '120'
on_startup = '30'
on_shutdown = '60'
refresh = '50'
self.cli_set(base_path + ['distance', 'global', global_distance])
self.cli_set(base_path + ['distance', 'ospf', 'external', external])
self.cli_set(base_path + ['distance', 'ospf', 'intra-area', intra_area])
self.cli_set(base_path + ['max-metric', 'router-lsa', 'on-startup', on_startup])
self.cli_set(base_path + ['max-metric', 'router-lsa', 'on-shutdown', on_shutdown])
self.cli_set(base_path + ['mpls-te', 'enable'])
self.cli_set(base_path + ['refresh', 'timers', refresh])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' mpls-te on', frrconfig)
self.assertIn(f' mpls-te router-address 0.0.0.0', frrconfig) # default
self.assertIn(f' distance {global_distance}', frrconfig)
self.assertIn(f' distance ospf intra-area {intra_area} external {external}', frrconfig)
self.assertIn(f' max-metric router-lsa on-startup {on_startup}', frrconfig)
self.assertIn(f' max-metric router-lsa on-shutdown {on_shutdown}', frrconfig)
self.assertIn(f' refresh timer {refresh}', frrconfig)
# enable inter-area
self.cli_set(base_path + ['distance', 'ospf', 'inter-area', inter_area])
self.cli_commit()
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f' distance ospf intra-area {intra_area} inter-area {inter_area} external {external}', frrconfig)
def test_ospf_06_neighbor(self):
priority = '10'
poll_interval = '20'
neighbors = ['1.1.1.1', '2.2.2.2', '3.3.3.3']
for neighbor in neighbors:
self.cli_set(base_path + ['neighbor', neighbor, 'priority', priority])
self.cli_set(base_path + ['neighbor', neighbor, 'poll-interval', poll_interval])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
for neighbor in neighbors:
self.assertIn(f' neighbor {neighbor} priority {priority} poll-interval {poll_interval}', frrconfig) # default
def test_ospf_07_redistribute(self):
metric = '15'
metric_type = '1'
redistribute = ['bgp', 'connected', 'isis', 'kernel', 'rip', 'static']
for protocol in redistribute:
self.cli_set(base_path + ['redistribute', protocol, 'metric', metric])
self.cli_set(base_path + ['redistribute', protocol, 'route-map', route_map])
self.cli_set(base_path + ['redistribute', protocol, 'metric-type', metric_type])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
for protocol in redistribute:
self.assertIn(f' redistribute {protocol} metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig)
def test_ospf_08_virtual_link(self):
networks = ['10.0.0.0/8', '172.16.0.0/12', '192.168.0.0/16']
area = '10'
shortcut = 'enable'
virtual_link = '192.0.2.1'
hello = '6'
retransmit = '5'
transmit = '5'
dead = '40'
self.cli_set(base_path + ['area', area, 'shortcut', shortcut])
self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'hello-interval', hello])
self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'retransmit-interval', retransmit])
self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'transmit-delay', transmit])
self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'dead-interval', dead])
for network in networks:
self.cli_set(base_path + ['area', area, 'network', network])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' area {area} shortcut {shortcut}', frrconfig)
self.assertIn(f' area {area} virtual-link {virtual_link} hello-interval {hello} retransmit-interval {retransmit} transmit-delay {transmit} dead-interval {dead}', frrconfig)
for network in networks:
self.assertIn(f' network {network} area {area}', frrconfig)
def test_ospf_09_interface_configuration(self):
interfaces = Section.interfaces('ethernet')
password = 'vyos1234'
bandwidth = '10000'
cost = '150'
network = 'point-to-point'
priority = '200'
bfd_profile = 'vyos-test'
self.cli_set(base_path + ['passive-interface', 'default'])
for interface in interfaces:
base_interface = base_path + ['interface', interface]
self.cli_set(base_interface + ['authentication', 'plaintext-password', password])
self.cli_set(base_interface + ['bandwidth', bandwidth])
self.cli_set(base_interface + ['bfd', 'profile', bfd_profile])
self.cli_set(base_interface + ['cost', cost])
self.cli_set(base_interface + ['mtu-ignore'])
self.cli_set(base_interface + ['network', network])
self.cli_set(base_interface + ['priority', priority])
self.cli_set(base_interface + ['passive', 'disable'])
# commit changes
self.cli_commit()
for interface in interfaces:
config = self.getFRRconfig(f'interface {interface}')
self.assertIn(f'interface {interface}', config)
self.assertIn(f' ip ospf authentication-key {password}', config)
self.assertIn(f' ip ospf bfd', config)
self.assertIn(f' ip ospf bfd profile {bfd_profile}', config)
self.assertIn(f' ip ospf cost {cost}', config)
self.assertIn(f' ip ospf mtu-ignore', config)
self.assertIn(f' ip ospf network {network}', config)
self.assertIn(f' ip ospf priority {priority}', config)
self.assertIn(f' no ip ospf passive', config)
self.assertIn(f' bandwidth {bandwidth}', config)
def test_ospf_10_zebra_route_map(self):
# Implemented because of T3328
self.cli_set(base_path + ['route-map', route_map])
# commit changes
self.cli_commit()
# Verify FRR configuration
zebra_route_map = f'ip protocol ospf route-map {route_map}'
frrconfig = self.getFRRconfig(zebra_route_map)
self.assertIn(zebra_route_map, frrconfig)
# Remove the route-map again
self.cli_delete(base_path + ['route-map'])
# commit changes
self.cli_commit()
# Verify FRR configuration
frrconfig = self.getFRRconfig(zebra_route_map)
self.assertNotIn(zebra_route_map, frrconfig)
def test_ospf_11_interface_area(self):
area = '0'
interfaces = Section.interfaces('ethernet')
self.cli_set(base_path + ['area', area, 'network', '10.0.0.0/8'])
for interface in interfaces:
self.cli_set(base_path + ['interface', interface, 'area', area])
# we can not have bot area network and interface area set
with self.assertRaises(ConfigSessionError):
self.cli_commit()
self.cli_delete(base_path + ['area', area, 'network'])
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
for interface in interfaces:
config = self.getFRRconfig(f'interface {interface}')
self.assertIn(f'interface {interface}', config)
self.assertIn(f' ip ospf area {area}', config)
def test_ospf_12_vrfs(self):
# It is safe to assume that when the basic VRF test works, all
# other OSPF related features work, as we entirely inherit the CLI
# templates and Jinja2 FRR template.
table = '1000'
vrf = 'blue'
vrf_base = ['vrf', 'name', vrf]
vrf_iface = 'eth1'
self.cli_set(vrf_base + ['table', table])
self.cli_set(vrf_base + ['protocols', 'ospf', 'interface', vrf_iface])
self.cli_set(['interfaces', 'ethernet', vrf_iface, 'vrf', vrf])
# Also set a default VRF OSPF config
self.cli_set(base_path)
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
frrconfig = self.getFRRconfig(f'router ospf vrf {vrf}')
self.assertIn(f'router ospf vrf {vrf}', frrconfig)
self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults
# cleanup
self.cli_delete(['vrf', 'name', vrf])
self.cli_delete(['interfaces', 'ethernet', vrf_iface, 'vrf'])
def test_ospf_13_export_list(self):
# Verify explort-list works on ospf-area
acl = '100'
seq = '10'
area = '0.0.0.10'
network = '10.0.0.0/8'
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'action', 'permit'])
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'source', 'any'])
self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'destination', 'any'])
self.cli_set(base_path + ['area', area, 'network', network])
self.cli_set(base_path + ['area', area, 'export-list', acl])
# commit changes
self.cli_commit()
# Verify FRR ospfd configuration
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f'router ospf', frrconfig)
self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # default
self.assertIn(f' network {network} area {area}', frrconfig)
self.assertIn(f' area {area} export-list {acl}', frrconfig)
def test_ospf_14_segment_routing_configuration(self):
global_block_low = "300"
global_block_high = "399"
local_block_low = "400"
local_block_high = "499"
interface = 'lo'
maximum_stack_size = '5'
prefix_one = '192.168.0.1/32'
prefix_two = '192.168.0.2/32'
prefix_one_value = '1'
prefix_two_value = '2'
self.cli_set(base_path + ['interface', interface])
self.cli_set(base_path + ['segment-routing', 'maximum-label-depth', maximum_stack_size])
self.cli_set(base_path + ['segment-routing', 'global-block', 'low-label-value', global_block_low])
self.cli_set(base_path + ['segment-routing', 'global-block', 'high-label-value', global_block_high])
self.cli_set(base_path + ['segment-routing', 'local-block', 'low-label-value', local_block_low])
self.cli_set(base_path + ['segment-routing', 'local-block', 'high-label-value', local_block_high])
self.cli_set(base_path + ['segment-routing', 'prefix', prefix_one, 'index', 'value', prefix_one_value])
self.cli_set(base_path + ['segment-routing', 'prefix', prefix_one, 'index', 'explicit-null'])
self.cli_set(base_path + ['segment-routing', 'prefix', prefix_two, 'index', 'value', prefix_two_value])
self.cli_set(base_path + ['segment-routing', 'prefix', prefix_two, 'index', 'no-php-flag'])
# Commit all changes
self.cli_commit()
# Verify all changes
frrconfig = self.getFRRconfig('router ospf')
self.assertIn(f' segment-routing on', frrconfig)
self.assertIn(f' segment-routing global-block {global_block_low} {global_block_high} local-block {local_block_low} {local_block_high}', frrconfig)
self.assertIn(f' segment-routing node-msd {maximum_stack_size}', frrconfig)
self.assertIn(f' segment-routing prefix {prefix_one} index {prefix_one_value} explicit-null', frrconfig)
self.assertIn(f' segment-routing prefix {prefix_two} index {prefix_two_value} no-php-flag', frrconfig)
if __name__ == '__main__':
unittest.main(verbosity=2)