diff --git a/interface-definitions/dhcp-server.xml.in b/interface-definitions/dhcp-server.xml.in
index 0747d649a..6e1592200 100644
--- a/interface-definitions/dhcp-server.xml.in
+++ b/interface-definitions/dhcp-server.xml.in
@@ -1,490 +1,477 @@
<?xml version="1.0"?>
<!-- DHCP server configuration -->
<interfaceDefinition>
<node name="service">
<children>
<node name="dhcp-server" owner="${vyos_conf_scripts_dir}/dhcp_server.py">
<properties>
<help>Dynamic Host Configuration Protocol (DHCP) for DHCP server</help>
<priority>911</priority>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<leafNode name="dynamic-dns-update">
<properties>
<help>Dynamically update Domain Name System (RFC4702)</help>
<valueless/>
</properties>
</leafNode>
<node name="failover">
<properties>
<help>DHCP failover configuration</help>
</properties>
<children>
#include <include/source-address-ipv4.xml.i>
<leafNode name="remote">
<properties>
<help>IPv4 remote address used for connectio</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address of failover peer</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="name">
<properties>
<help>Peer name used to identify connection</help>
<constraint>
<regex>[-_a-zA-Z0-9.]+</regex>
</constraint>
<constraintErrorMessage>Invalid failover peer name. May only contain letters, numbers and .-_</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="status">
<properties>
<help>Failover hierarchy</help>
<completionHelp>
<list>primary secondary</list>
</completionHelp>
<valueHelp>
<format>primary</format>
<description>Configure this server to be the primary node</description>
</valueHelp>
<valueHelp>
<format>secondary</format>
<description>Configure this server to be the secondary node</description>
</valueHelp>
<constraint>
<regex>(primary|secondary)</regex>
</constraint>
<constraintErrorMessage>Invalid DHCP failover peer status</constraintErrorMessage>
</properties>
</leafNode>
</children>
</node>
<leafNode name="global-parameters">
<properties>
- <help>Additional global parameters for DHCP server. You must
- use the syntax of dhcpd.conf in this text-field. Using this
- without proper knowledge may result in a crashed DHCP server.
- Check system log to look for errors.</help>
+ <help>Additional global parameters for DHCP server. You must use the syntax of dhcpd.conf in this text-field. Using this without proper knowledge may result in a crashed DHCP server. Check system log to look for errors.</help>
<multi/>
</properties>
</leafNode>
<leafNode name="hostfile-update">
<properties>
<help>Updating /etc/hosts file (per client lease)</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="host-decl-name">
<properties>
<help>Use host declaration name for forward DNS name</help>
<valueless/>
</properties>
</leafNode>
#include <include/listen-address-ipv4.xml.i>
<tagNode name="shared-network-name">
<properties>
<help>Name of DHCP shared network</help>
<constraint>
<regex>[-_a-zA-Z0-9.]+</regex>
</constraint>
<constraintErrorMessage>Invalid shared network name. May only contain letters, numbers and .-_</constraintErrorMessage>
</properties>
<children>
<leafNode name="authoritative">
<properties>
<help>Option to make DHCP server authoritative for this physical network</help>
<valueless/>
</properties>
</leafNode>
#include <include/dhcp/domain-name.xml.i>
#include <include/dhcp/domain-search.xml.i>
#include <include/dhcp/ntp-server.xml.i>
#include <include/dhcp/ping-check.xml.i>
#include <include/generic-description.xml.i>
#include <include/generic-disable-node.xml.i>
#include <include/name-server-ipv4.xml.i>
<leafNode name="shared-network-parameters">
<properties>
- <help>Additional shared-network parameters for DHCP server.
- You must use the syntax of dhcpd.conf in this text-field.
- Using this without proper knowledge may result in a crashed
- DHCP server. Check system log to look for errors.</help>
+ <help>Additional shared-network parameters for DHCP server. You must use the syntax of dhcpd.conf in this text-field. Using this without proper knowledge may result in a crashed DHCP server. Check system log to look for errors.</help>
<multi/>
</properties>
</leafNode>
<tagNode name="subnet">
<properties>
<help>DHCP subnet for shared network</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 address and prefix length</description>
</valueHelp>
<constraint>
<validator name="ipv4-prefix"/>
</constraint>
<constraintErrorMessage>Invalid IPv4 subnet definition</constraintErrorMessage>
</properties>
<children>
<leafNode name="bootfile-name">
<properties>
<help>Bootstrap file name</help>
<constraint>
<regex>[-_a-zA-Z0-9./]+</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="bootfile-server">
<properties>
<help>Server from which the initial boot file is to be loaded</help>
<valueHelp>
<format>ipv4</format>
<description>Bootfile server IPv4 address</description>
</valueHelp>
<valueHelp>
<format>hostname</format>
<description>Bootfile server FQDN</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
<validator name="fqdn"/>
</constraint>
</properties>
</leafNode>
<leafNode name="bootfile-size">
<properties>
<help>Bootstrap file size</help>
<valueHelp>
<format>u32:1-16</format>
<description>Bootstrap file size in 512 byte blocks</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-16"/>
</constraint>
</properties>
</leafNode>
<leafNode name="client-prefix-length">
<properties>
<help>Specifies the clients subnet mask as per RFC 950. If unset, subnet declaration is used.</help>
<valueHelp>
<format>u32:0-32</format>
<description>DHCP client prefix length must be 0 to 32</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-32"/>
</constraint>
<constraintErrorMessage>DHCP client prefix length must be 0 to 32</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="default-router">
<properties>
<help>IP address of default router</help>
<valueHelp>
<format>ipv4</format>
<description>Default router IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
#include <include/dhcp/domain-name.xml.i>
#include <include/dhcp/domain-search.xml.i>
#include <include/generic-description.xml.i>
#include <include/name-server-ipv4.xml.i>
<leafNode name="enable-failover">
<properties>
<help>Enable DHCP failover support for this subnet</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="exclude">
<properties>
<help>IP address to exclude from DHCP lease range</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address to exclude from lease range</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="ip-forwarding">
<properties>
<help>Enable IP forwarding on client</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="lease">
<properties>
<help>Lease timeout in seconds</help>
<valueHelp>
<format>u32</format>
<description>DHCP lease time in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-4294967295"/>
</constraint>
<constraintErrorMessage>DHCP lease time must be between 0 and 4294967295 (49 days)</constraintErrorMessage>
</properties>
<defaultValue>86400</defaultValue>
</leafNode>
#include <include/dhcp/ntp-server.xml.i>
#include <include/dhcp/ping-check.xml.i>
<leafNode name="pop-server">
<properties>
<help>IP address of POP3 server</help>
<valueHelp>
<format>ipv4</format>
<description>POP3 server IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="server-identifier">
<properties>
<help>Address for DHCP server identifier</help>
<valueHelp>
<format>ipv4</format>
<description>DHCP server identifier IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="smtp-server">
<properties>
<help>IP address of SMTP server</help>
<valueHelp>
<format>ipv4</format>
<description>SMTP server IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<tagNode name="range">
<properties>
<help>DHCP lease range</help>
<constraint>
<regex>[-_a-zA-Z0-9.]+</regex>
</constraint>
<constraintErrorMessage>Invalid range name, may only be alphanumeric, dot and hyphen</constraintErrorMessage>
</properties>
<children>
<leafNode name="start">
<properties>
<help>First IP address for DHCP lease range</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 start address of pool</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="stop">
<properties>
<help>Last IP address for DHCP lease range</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 end address of pool</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
</children>
</tagNode>
<tagNode name="static-mapping">
<properties>
<help>Name of static mapping</help>
<constraint>
<regex>[-_a-zA-Z0-9.]+</regex>
</constraint>
<constraintErrorMessage>Invalid static mapping name, may only be alphanumeric, dot and hyphen</constraintErrorMessage>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<leafNode name="ip-address">
<properties>
<help>Fixed IP address of static mapping</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address used in static mapping</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="mac-address">
<properties>
<help>Media Access Control (MAC) address</help>
<valueHelp>
<format>macaddr</format>
<description>Hardware (MAC) address</description>
</valueHelp>
<constraint>
<validator name="mac-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="static-mapping-parameters">
<properties>
- <help>Additional static-mapping parameters for DHCP server.
- Will be placed inside the "host" block of the mapping.
- You must use the syntax of dhcpd.conf in this text-field.
- Using this without proper knowledge may result in a crashed
- DHCP server. Check system log to look for errors.</help>
+ <help>Additional static-mapping parameters for DHCP server. Will be placed inside the "host" block of the mapping. You must use the syntax of dhcpd.conf in this text-field. Using this without proper knowledge may result in a crashed DHCP server. Check system log to look for errors.</help>
<multi/>
</properties>
</leafNode>
</children>
</tagNode>
<tagNode name="static-route">
<properties>
<help>Classless static route destination subnet</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 address and prefix length</description>
</valueHelp>
<constraint>
<validator name="ipv4-prefix"/>
</constraint>
</properties>
<children>
<leafNode name="next-hop">
<properties>
<help>IP address of router to be used to reach the destination subnet</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address of router</description>
</valueHelp>
<constraint>
<validator name="ip-address"/>
</constraint>
</properties>
</leafNode>
</children>
</tagNode >
<leafNode name="subnet-parameters">
<properties>
- <help>Additional subnet parameters for DHCP server. You must
- use the syntax of dhcpd.conf in this text-field. Using this
- without proper knowledge may result in a crashed DHCP server.
- Check system log to look for errors.</help>
+ <help>Additional subnet parameters for DHCP server. You must use the syntax of dhcpd.conf in this text-field. Using this without proper knowledge may result in a crashed DHCP server. Check system log to look for errors.</help>
<multi/>
</properties>
</leafNode>
<leafNode name="tftp-server-name">
<properties>
<help>TFTP server name</help>
<valueHelp>
<format>ipv4</format>
<description>TFTP server IPv4 address</description>
</valueHelp>
<valueHelp>
<format>hostname</format>
<description>TFTP server FQDN</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
<validator name="fqdn"/>
</constraint>
</properties>
</leafNode>
<leafNode name="time-offset">
<properties>
<help>Client subnet offset in seconds from Coordinated Universal Time (UTC)</help>
<valueHelp>
<format>[-]N</format>
<description>Time offset (number, may be negative)</description>
</valueHelp>
<constraint>
<regex>-?[0-9]+</regex>
</constraint>
<constraintErrorMessage>Invalid time offset value</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="time-server">
<properties>
<help>IP address of time server</help>
<valueHelp>
<format>ipv4</format>
<description>Time server IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<node name="vendor-option">
<properties>
<help>Vendor Specific Options</help>
</properties>
<children>
<node name="ubiquiti">
<properties>
<help>Ubiquiti specific parameters</help>
</properties>
<children>
<leafNode name="unifi-controller">
<properties>
<help>Address of UniFi controller</help>
<valueHelp>
<format>ipv4</format>
<description>IP address of UniFi controller</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
</children>
</node>
</children>
</node>
<leafNode name="wins-server">
<properties>
<help>IP address for Windows Internet Name Service (WINS) server</help>
<valueHelp>
<format>ipv4</format>
<description>WINS server IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="wpad-url">
<properties>
<help>Web Proxy Autodiscovery (WPAD) URL</help>
</properties>
</leafNode>
</children>
</tagNode>
</children>
</tagNode>
</children>
</node>
</children>
</node>
</interfaceDefinition>
diff --git a/interface-definitions/interfaces-openvpn.xml.in b/interface-definitions/interfaces-openvpn.xml.in
index bfad6d70f..f1cbf8468 100644
--- a/interface-definitions/interfaces-openvpn.xml.in
+++ b/interface-definitions/interfaces-openvpn.xml.in
@@ -1,827 +1,821 @@
<?xml version="1.0"?>
<interfaceDefinition>
<node name="interfaces">
<children>
<tagNode name="openvpn" owner="${vyos_conf_scripts_dir}/interfaces-openvpn.py">
<properties>
<help>OpenVPN Tunnel Interface</help>
<priority>460</priority>
<constraint>
<regex>vtun[0-9]+</regex>
</constraint>
<constraintErrorMessage>OpenVPN tunnel interface must be named vtunN</constraintErrorMessage>
<valueHelp>
<format>vtunN</format>
<description>OpenVPN interface name</description>
</valueHelp>
</properties>
<children>
<node name="authentication">
<properties>
<help>Authentication options</help>
</properties>
<children>
<leafNode name="password">
<properties>
<help>OpenVPN password used for authentication</help>
</properties>
</leafNode>
<leafNode name="username">
<properties>
<help>OpenVPN username used for authentication</help>
</properties>
</leafNode>
</children>
</node>
#include <include/interface/description.xml.i>
#include <include/interface/interface-firewall.xml.i>
#include <include/interface/interface-policy.xml.i>
<leafNode name="device-type">
<properties>
<help>OpenVPN interface device-type</help>
<completionHelp>
<list>tun tap</list>
</completionHelp>
<valueHelp>
<format>tun</format>
<description>TUN device, required for OSI layer 3</description>
</valueHelp>
<valueHelp>
<format>tap</format>
<description>TAP device, required for OSI layer 2</description>
</valueHelp>
<constraint>
<regex>(tun|tap)</regex>
</constraint>
</properties>
<defaultValue>tun</defaultValue>
</leafNode>
#include <include/interface/disable.xml.i>
<node name="encryption">
<properties>
<help>Data Encryption settings</help>
</properties>
<children>
<leafNode name="cipher">
<properties>
<help>Standard Data Encryption Algorithm</help>
<completionHelp>
<list>none des 3des bf128 bf256 aes128 aes128gcm aes192 aes192gcm aes256 aes256gcm</list>
</completionHelp>
<valueHelp>
<format>none</format>
<description>Disable encryption</description>
</valueHelp>
<valueHelp>
<format>des</format>
<description>DES algorithm</description>
</valueHelp>
<valueHelp>
<format>3des</format>
<description>DES algorithm with triple encryption</description>
</valueHelp>
<valueHelp>
<format>bf128</format>
<description>Blowfish algorithm with 128-bit key</description>
</valueHelp>
<valueHelp>
<format>bf256</format>
<description>Blowfish algorithm with 256-bit key</description>
</valueHelp>
<valueHelp>
<format>aes128</format>
<description>AES algorithm with 128-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes128gcm</format>
<description>AES algorithm with 128-bit key GCM</description>
</valueHelp>
<valueHelp>
<format>aes192</format>
<description>AES algorithm with 192-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes192gcm</format>
<description>AES algorithm with 192-bit key GCM</description>
</valueHelp>
<valueHelp>
<format>aes256</format>
<description>AES algorithm with 256-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes256gcm</format>
<description>AES algorithm with 256-bit key GCM</description>
</valueHelp>
<constraint>
<regex>(none|des|3des|bf128|bf256|aes128|aes128gcm|aes192|aes192gcm|aes256|aes256gcm)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="ncp-ciphers">
<properties>
<help>Cipher negotiation list for use in server or client mode</help>
<completionHelp>
<list>none des 3des aes128 aes128gcm aes192 aes192gcm aes256 aes256gcm</list>
</completionHelp>
<valueHelp>
<format>none</format>
<description>Disable encryption</description>
</valueHelp>
<valueHelp>
<format>des</format>
<description>DES algorithm</description>
</valueHelp>
<valueHelp>
<format>3des</format>
<description>DES algorithm with triple encryption</description>
</valueHelp>
<valueHelp>
<format>aes128</format>
<description>AES algorithm with 128-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes128gcm</format>
<description>AES algorithm with 128-bit key GCM</description>
</valueHelp>
<valueHelp>
<format>aes192</format>
<description>AES algorithm with 192-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes192gcm</format>
<description>AES algorithm with 192-bit key GCM</description>
</valueHelp>
<valueHelp>
<format>aes256</format>
<description>AES algorithm with 256-bit key CBC</description>
</valueHelp>
<valueHelp>
<format>aes256gcm</format>
<description>AES algorithm with 256-bit key GCM</description>
</valueHelp>
<constraint>
<regex>(none|des|3des|aes128|aes128gcm|aes192|aes192gcm|aes256|aes256gcm)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
</children>
</node>
#include <include/interface/ipv4-options.xml.i>
#include <include/interface/ipv6-options.xml.i>
#include <include/interface/mirror.xml.i>
<leafNode name="hash">
<properties>
<help>Hashing Algorithm</help>
<completionHelp>
<list>md5 sha1 sha256 sha384 sha512</list>
</completionHelp>
<valueHelp>
<format>md5</format>
<description>MD5 algorithm</description>
</valueHelp>
<valueHelp>
<format>sha1</format>
<description>SHA-1 algorithm</description>
</valueHelp>
<valueHelp>
<format>sha256</format>
<description>SHA-256 algorithm</description>
</valueHelp>
<valueHelp>
<format>sha384</format>
<description>SHA-384 algorithm</description>
</valueHelp>
<valueHelp>
<format>sha512</format>
<description>SHA-512 algorithm</description>
</valueHelp>
<constraint>
<regex>(md5|sha1|sha256|sha384|sha512)</regex>
</constraint>
</properties>
</leafNode>
<node name="keep-alive">
<properties>
<help>Keepalive helper options</help>
</properties>
<children>
<leafNode name="failure-count">
<properties>
<help>Maximum number of keepalive packet failures</help>
<valueHelp>
<format>u32:0-1000</format>
<description>Maximum number of keepalive packet failures</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-1000"/>
</constraint>
</properties>
<defaultValue>60</defaultValue>
</leafNode>
<leafNode name="interval">
<properties>
<help>Keepalive packet interval in seconds</help>
<valueHelp>
<format>u32:0-600</format>
<description>Keepalive packet interval (seconds)</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-600"/>
</constraint>
</properties>
<defaultValue>10</defaultValue>
</leafNode>
</children>
</node>
<tagNode name="local-address">
<properties>
<help>Local IP address of tunnel (IPv4 or IPv6)</help>
<constraint>
<validator name="ip-address"/>
</constraint>
</properties>
<children>
<leafNode name="subnet-mask">
<properties>
<help>Subnet-mask for local IP address of tunnel (IPv4 only)</help>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
</children>
</tagNode>
<leafNode name="local-host">
<properties>
<help>Local IP address to accept connections (all if not set)</help>
<valueHelp>
<format>ipv4</format>
<description>Local IPv4 address</description>
</valueHelp>
<valueHelp>
<format>ipv6</format>
<description>Local IPv6 address</description>
</valueHelp>
<constraint>
<validator name="ip-address"/>
</constraint>
</properties>
</leafNode>
<leafNode name="local-port">
<properties>
<help>Local port number to accept connections</help>
<valueHelp>
<format>u32:1-65535</format>
<description>Numeric IP port</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
</leafNode>
<leafNode name="mode">
<properties>
<help>OpenVPN mode of operation</help>
<completionHelp>
<list>site-to-site client server</list>
</completionHelp>
<valueHelp>
<format>site-to-site</format>
<description>Site-to-site mode</description>
</valueHelp>
<valueHelp>
<format>client</format>
<description>Client in client-server mode</description>
</valueHelp>
<valueHelp>
<format>server</format>
<description>Server in client-server mode</description>
</valueHelp>
<constraint>
<regex>(site-to-site|client|server)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="openvpn-option">
<properties>
- <help>Additional OpenVPN options. You must
- use the syntax of openvpn.conf in this text-field. Using this
- without proper knowledge may result in a crashed OpenVPN server.
- Check system log to look for errors.</help>
+ <help>Additional OpenVPN options. You must use the syntax of openvpn.conf in this text-field. Using this without proper knowledge may result in a crashed OpenVPN server. Check system log to look for errors.</help>
<multi/>
</properties>
</leafNode>
<leafNode name="persistent-tunnel">
<properties>
<help>Do not close and reopen interface (TUN/TAP device) on client restarts</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="protocol">
<properties>
<help>OpenVPN communication protocol</help>
<completionHelp>
<list>udp tcp-passive tcp-active</list>
</completionHelp>
<valueHelp>
<format>udp</format>
<description>UDP</description>
</valueHelp>
<valueHelp>
<format>tcp-passive</format>
<description>TCP and accepts connections passively</description>
</valueHelp>
<valueHelp>
<format>tcp-active</format>
<description>TCP and initiates connections actively</description>
</valueHelp>
<constraint>
<regex>(udp|tcp-passive|tcp-active)</regex>
</constraint>
</properties>
<defaultValue>udp</defaultValue>
</leafNode>
<leafNode name="remote-address">
<properties>
<help>IP address of remote end of tunnel</help>
<valueHelp>
<format>ipv4</format>
<description>Remote end IPv4 address</description>
</valueHelp>
<valueHelp>
<format>ipv6</format>
<description>Remote end IPv6 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
<validator name="ipv6-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="remote-host">
<properties>
<help>Remote host to connect to (dynamic if not set)</help>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address of remote host</description>
</valueHelp>
<valueHelp>
<format>ipv6</format>
<description>IPv6 address of remote host</description>
</valueHelp>
<valueHelp>
<format>txt</format>
<description>Hostname of remote host</description>
</valueHelp>
<multi/>
</properties>
</leafNode>
<leafNode name="remote-port">
<properties>
<help>Remote port number to connect to</help>
<valueHelp>
<format>u32:1-65535</format>
<description>Numeric IP port</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
</leafNode>
<node name="replace-default-route">
<properties>
<help>OpenVPN tunnel to be used as the default route</help>
</properties>
<children>
<leafNode name="local">
<properties>
<help>Tunnel endpoints are on the same subnet</help>
</properties>
</leafNode>
</children>
</node>
<node name="server">
<properties>
<help>Server-mode options</help>
</properties>
<children>
<tagNode name="client">
<properties>
<help>Client-specific settings</help>
<valueHelp>
<format>name</format>
<description>Client common-name in the certificate</description>
</valueHelp>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<leafNode name="ip">
<properties>
<help>IP address of the client</help>
<valueHelp>
<format>ipv4</format>
<description>Client IPv4 address</description>
</valueHelp>
<valueHelp>
<format>ipv6</format>
<description>Client IPv6 address</description>
</valueHelp>
<constraint>
<validator name="ip-address"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="push-route">
<properties>
<help>Route to be pushed to the client</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 network and prefix length</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>IPv6 network and prefix length</description>
</valueHelp>
<constraint>
<validator name="ip-prefix"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="subnet">
<properties>
<help>Subnet belonging to the client (iroute)</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 network and prefix length belonging to the client</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>IPv6 network and prefix length belonging to the client</description>
</valueHelp>
<constraint>
<validator name="ip-prefix"/>
</constraint>
<multi/>
</properties>
</leafNode>
</children>
</tagNode>
<node name="client-ip-pool">
<properties>
<help>Pool of client IPv4 addresses</help>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<leafNode name="start">
<properties>
<help>First IP address in the pool</help>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address</description>
</valueHelp>
</properties>
</leafNode>
<leafNode name="stop">
<properties>
<help>Last IP address in the pool</help>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<valueHelp>
<format>ipv4</format>
<description>IPv4 address</description>
</valueHelp>
</properties>
</leafNode>
<leafNode name="subnet-mask">
<properties>
- <help>Subnet mask pushed to dynamic clients.
- If not set the server subnet mask will be used.
- Only used with topology subnet or device type tap.
- Not used with bridged interfaces.</help>
+ <help>Subnet mask pushed to dynamic clients. If not set the server subnet mask will be used. Only used with topology subnet or device type tap. Not used with bridged interfaces.</help>
<constraint>
<validator name="ipv4-address"/>
</constraint>
<valueHelp>
<format>ipv4</format>
<description>IPv4 subnet mask</description>
</valueHelp>
</properties>
</leafNode>
</children>
</node>
<node name="client-ipv6-pool">
<properties>
<help>Pool of client IPv6 addresses</help>
</properties>
<children>
<leafNode name="base">
<properties>
<help>Client IPv6 pool base address with optional prefix length</help>
<valueHelp>
<format>ipv6net</format>
<description>Client IPv6 pool base address with optional prefix length (defaults: base = server subnet + 0x1000, prefix length = server prefix length)</description>
</valueHelp>
<constraint>
<validator name="ipv6"/>
</constraint>
</properties>
</leafNode>
#include <include/generic-disable-node.xml.i>
</children>
</node>
<leafNode name="domain-name">
<properties>
<help>DNS suffix to be pushed to all clients</help>
<valueHelp>
<format>txt</format>
<description>Domain Name Server suffix</description>
</valueHelp>
</properties>
</leafNode>
<leafNode name="max-connections">
<properties>
<help>Number of maximum client connections</help>
<valueHelp>
<format>u32:1-4096</format>
<description>Number of concurrent clients</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-4096"/>
</constraint>
</properties>
</leafNode>
#include <include/name-server-ipv4-ipv6.xml.i>
<tagNode name="push-route">
<properties>
<help>Route to be pushed to all clients</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 network and prefix length</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>IPv6 network and prefix length</description>
</valueHelp>
<constraint>
<validator name="ip-prefix"/>
</constraint>
</properties>
<children>
<leafNode name="metric">
<properties>
<help>Set metric for this route</help>
<valueHelp>
<format>u32:0-4294967295</format>
<description>Metric for this route</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-4294967295"/>
</constraint>
</properties>
<defaultValue>0</defaultValue>
</leafNode>
</children>
</tagNode>
<leafNode name="reject-unconfigured-clients">
<properties>
<help>Reject connections from clients that are not explicitly configured</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="subnet">
<properties>
<help>Server-mode subnet (from which client IPs are allocated)</help>
<valueHelp>
<format>ipv4net</format>
<description>IPv4 network and prefix length</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>IPv6 network and prefix length</description>
</valueHelp>
<constraint>
<validator name="ip-prefix"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="topology">
<properties>
<help>Topology for clients</help>
<completionHelp>
<list>net30 point-to-point subnet</list>
</completionHelp>
<valueHelp>
<format>net30</format>
<description>net30 topology</description>
</valueHelp>
<valueHelp>
<format>point-to-point</format>
<description>Point-to-point topology</description>
</valueHelp>
<valueHelp>
<format>subnet</format>
<description>Subnet topology</description>
</valueHelp>
<constraint>
<regex>(subnet|point-to-point|net30)</regex>
</constraint>
</properties>
<defaultValue>net30</defaultValue>
</leafNode>
<node name="mfa">
<properties>
<help>multi-factor authentication</help>
</properties>
<children>
<node name="totp">
<properties>
<help>Time-based one-time passwords</help>
</properties>
<children>
<leafNode name="slop">
<properties>
<help>Maximum allowed clock slop in seconds</help>
<valueHelp>
<format>1-65535</format>
<description>Seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
<defaultValue>180</defaultValue>
</leafNode>
<leafNode name="drift">
<properties>
<help>Time drift in seconds</help>
<valueHelp>
<format>1-65535</format>
<description>Seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
<defaultValue>0</defaultValue>
</leafNode>
<leafNode name="step">
<properties>
<help>Step value for totp in seconds</help>
<valueHelp>
<format>1-65535</format>
<description>Seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
<defaultValue>30</defaultValue>
</leafNode>
<leafNode name="digits">
<properties>
<help>Number of digits to use for totp hash</help>
<valueHelp>
<format>1-65535</format>
<description>Seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
<defaultValue>6</defaultValue>
</leafNode>
<leafNode name="challenge">
<properties>
<help>Expect password as result of a challenge response protocol</help>
<completionHelp>
<list>disable enable</list>
</completionHelp>
<valueHelp>
<format>disable</format>
<description>Disable challenge-response</description>
</valueHelp>
<valueHelp>
<format>enable</format>
<description>Enable chalenge-response</description>
</valueHelp>
<constraint>
<regex>(disable|enable)</regex>
</constraint>
</properties>
<defaultValue>enable</defaultValue>
</leafNode>
</children>
</node>
</children>
</node>
</children>
</node>
<leafNode name="shared-secret-key">
<properties>
<help>Secret key shared with remote end of tunnel</help>
<completionHelp>
<path>pki openvpn shared-secret</path>
</completionHelp>
</properties>
</leafNode>
<node name="tls">
<properties>
<help>Transport Layer Security (TLS) options</help>
</properties>
<children>
<leafNode name="auth-key">
<properties>
<help>TLS shared secret key for tls-auth</help>
<completionHelp>
<path>pki openvpn shared-secret</path>
</completionHelp>
</properties>
</leafNode>
#include <include/pki/certificate.xml.i>
#include <include/pki/ca-certificate.xml.i>
<leafNode name="dh-params">
<properties>
<help>Diffie Hellman parameters (server only)</help>
<completionHelp>
<path>pki dh</path>
</completionHelp>
</properties>
</leafNode>
<leafNode name="crypt-key">
<properties>
<help>Static key to use to authenticate control channel</help>
<completionHelp>
<path>pki openvpn shared-secret</path>
</completionHelp>
</properties>
</leafNode>
<leafNode name="tls-version-min">
<properties>
<help>Specify the minimum required TLS version</help>
<completionHelp>
<list>1.0 1.1 1.2 1.3</list>
</completionHelp>
<valueHelp>
<format>1.0</format>
<description>TLS v1.0</description>
</valueHelp>
<valueHelp>
<format>1.1</format>
<description>TLS v1.1</description>
</valueHelp>
<valueHelp>
<format>1.2</format>
<description>TLS v1.2</description>
</valueHelp>
<valueHelp>
<format>1.3</format>
<description>TLS v1.3</description>
</valueHelp>
<constraint>
<regex>(1.0|1.1|1.2|1.3)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="role">
<properties>
<help>TLS negotiation role</help>
<completionHelp>
<list>active passive</list>
</completionHelp>
<valueHelp>
<format>active</format>
<description>Initiate TLS negotiation actively</description>
</valueHelp>
<valueHelp>
<format>passive</format>
<description>Wait for incoming TLS connection</description>
</valueHelp>
<constraint>
<regex>(active|passive)</regex>
</constraint>
</properties>
</leafNode>
</children>
</node>
<leafNode name="use-lzo-compression">
<properties>
<help>Use fast LZO compression on this TUN/TAP interface</help>
<valueless/>
</properties>
</leafNode>
#include <include/interface/redirect.xml.i>
#include <include/interface/vrf.xml.i>
</children>
</tagNode>
</children>
</node>
</interfaceDefinition>
diff --git a/interface-definitions/interfaces-wireless.xml.in b/interface-definitions/interfaces-wireless.xml.in
index eb6107303..daee770a9 100644
--- a/interface-definitions/interfaces-wireless.xml.in
+++ b/interface-definitions/interfaces-wireless.xml.in
@@ -1,792 +1,790 @@
<?xml version="1.0"?>
<interfaceDefinition>
<node name="interfaces">
<children>
<tagNode name="wireless" owner="${vyos_conf_scripts_dir}/interfaces-wireless.py">
<properties>
<help>Wireless (WiFi/WLAN) Network Interface</help>
<priority>318</priority>
<completionHelp>
<script>cd /sys/class/net; if compgen -G "wlan*" > /dev/null; then ls -d wlan*; fi</script>
</completionHelp>
<constraint>
<regex>wlan[0-9]+</regex>
</constraint>
<constraintErrorMessage>Wireless interface must be named wlanN</constraintErrorMessage>
<valueHelp>
<format>wlanN</format>
<description>Wireless (WiFi/WLAN) interface name</description>
</valueHelp>
</properties>
<children>
#include <include/interface/address-ipv4-ipv6-dhcp.xml.i>
#include <include/interface/interface-firewall.xml.i>
#include <include/interface/interface-policy.xml.i>
<node name="capabilities">
<properties>
<help>HT and VHT capabilities for your card</help>
</properties>
<children>
<node name="ht">
<properties>
<help>HT (High Throughput) settings</help>
</properties>
<children>
<leafNode name="40mhz-incapable">
<properties>
<help>40MHz intolerance, use 20MHz only!</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="auto-powersave">
<properties>
<help>Enable WMM-PS unscheduled automatic power aave delivery [U-APSD]</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="channel-set-width">
<properties>
<help>Supported channel set width</help>
<completionHelp>
<list>ht20 ht40+ ht40-</list>
</completionHelp>
<valueHelp>
<format>ht20</format>
<description>Supported channel set width both 20 MHz only</description>
</valueHelp>
<valueHelp>
<format>ht40+</format>
<description>Supported channel set width both 20 MHz and 40 MHz with secondary channel above primary channel</description>
</valueHelp>
<valueHelp>
<format>ht40-</format>
<description>Supported channel set width both 20 MHz and 40 MHz with secondary channel below primary channel</description>
</valueHelp>
<constraint>
<regex>(ht20|ht40\+|ht40-)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="delayed-block-ack">
<properties>
<help>Enable HT-delayed block ack</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="dsss-cck-40">
<properties>
<help>Enable DSSS_CCK-40</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="greenfield">
<properties>
<help>Enable HT-greenfield</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="ldpc">
<properties>
<help>Enable LDPC coding capability</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="lsig-protection">
<properties>
<help>Enable L-SIG TXOP protection capability</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="max-amsdu">
<properties>
<help>Set maximum A-MSDU length</help>
<completionHelp>
<list>3839 7935</list>
</completionHelp>
<valueHelp>
<format>3839</format>
<description>Set maximum A-MSDU length to 3839 octets</description>
</valueHelp>
<valueHelp>
<format>7935</format>
<description>Set maximum A-MSDU length to 7935 octets</description>
</valueHelp>
<constraint>
<regex>(3839|7935)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="short-gi">
<properties>
<help>Short GI capabilities</help>
<completionHelp>
<list>20 40</list>
</completionHelp>
<valueHelp>
<format>20</format>
<description>Short GI for 20 MHz</description>
</valueHelp>
<valueHelp>
<format>40</format>
<description>Short GI for 40 MHz</description>
</valueHelp>
<constraint>
<regex>(20|40)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="smps">
<properties>
<help>Spatial Multiplexing Power Save (SMPS) settings</help>
<completionHelp>
<list>static dynamic</list>
</completionHelp>
<valueHelp>
<format>static</format>
<description>STATIC Spatial Multiplexing (SM) Power Save</description>
</valueHelp>
<valueHelp>
<format>dynamic</format>
<description>DYNAMIC Spatial Multiplexing (SM) Power Save</description>
</valueHelp>
<constraint>
<regex>(static|dynamic)</regex>
</constraint>
</properties>
</leafNode>
<node name="stbc">
<properties>
<help>Support for sending and receiving PPDU using STBC (Space Time Block Coding)</help>
</properties>
<children>
<leafNode name="rx">
<properties>
<help>Enable receiving PPDU using STBC (Space Time Block Coding)</help>
<valueHelp>
<format>[1-3]+</format>
<description>Number of spacial streams that can use RX STBC</description>
</valueHelp>
<constraint>
<regex>[1-3]+</regex>
</constraint>
<constraintErrorMessage>Invalid capability item</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="tx">
<properties>
<help>Enable sending PPDU using STBC (Space Time Block Coding)</help>
<valueless/>
</properties>
</leafNode>
</children>
</node>
</children>
</node>
<leafNode name="require-ht">
<properties>
<help>Require stations to support HT PHY (reject association if they do not)</help>
<completionHelp>
<script>echo If you reject non-HT, you also disable 802.11g</script>
</completionHelp>
<valueless/>
</properties>
</leafNode>
<leafNode name="require-vht">
<properties>
<help>Require stations to support VHT PHY (reject association if they do not)</help>
<completionHelp>
<script>echo If you reject non-VHT, you also disable 802.11n</script>
</completionHelp>
<valueless/>
</properties>
</leafNode>
<node name="vht">
<properties>
<help>VHT (Very High Throughput) settings</help>
</properties>
<children>
<leafNode name="antenna-count">
<properties>
<help>Number of antennas on this card</help>
<valueHelp>
<format>u32:1-8</format>
<description>Number of antennas for this card</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-8"/>
</constraint>
</properties>
</leafNode>
<leafNode name="antenna-pattern-fixed">
<properties>
<help>Set if antenna pattern does not change during the lifetime of an association</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="beamform">
<properties>
<help>Beamforming capabilities</help>
<completionHelp>
<list>single-user-beamformer single-user-beamformee multi-user-beamformer multi-user-beamformee</list>
</completionHelp>
<valueHelp>
<format>single-user-beamformer</format>
<description>Support for operation as single user beamformer</description>
</valueHelp>
<valueHelp>
<format>single-user-beamformee</format>
<description>Support for operation as single user beamformee</description>
</valueHelp>
<valueHelp>
<format>multi-user-beamformer</format>
<description>Support for operation as multi user beamformer</description>
</valueHelp>
<valueHelp>
<format>multi-user-beamformee</format>
<description>Support for operation as multi user beamformee</description>
</valueHelp>
<constraint>
<regex>(single-user-beamformer|single-user-beamformee|multi-user-beamformer|multi-user-beamformee)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
<node name="center-channel-freq">
<properties>
<help>VHT operating channel center frequency</help>
</properties>
<children>
<leafNode name="freq-1">
<properties>
<help>VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes)</help>
<valueHelp>
<format>u32:34-173</format>
<description>5Ghz (802.11 a/h/j/n/ac) center channel index (use 42 for primary 80MHz channel 36)</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 34-173"/>
</constraint>
<constraintErrorMessage>Channel center value must be between 34 and 173</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="freq-2">
<properties>
<help>VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode)</help>
<valueHelp>
<format>u32:34-173</format>
<description>5Ghz (802.11 a/h/j/n/ac) center channel index (use 58 for primary 80MHz channel 52)</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 34-173"/>
</constraint>
<constraintErrorMessage>Channel center value must be between 34 and 173</constraintErrorMessage>
</properties>
</leafNode>
</children>
</node>
<leafNode name="channel-set-width">
<properties>
<help>VHT operating Channel width</help>
<completionHelp>
<list>0 1 2 3</list>
</completionHelp>
<valueHelp>
<format>0</format>
<description>20 or 40 MHz channel width</description>
</valueHelp>
<valueHelp>
<format>1</format>
<description>80 MHz channel width</description>
</valueHelp>
<valueHelp>
<format>2</format>
<description>160 MHz channel width</description>
</valueHelp>
<valueHelp>
<format>3</format>
<description>80+80 MHz channel width</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-3"/>
</constraint>
</properties>
</leafNode>
<leafNode name="ldpc">
<properties>
<help>Enable LDPC (Low Density Parity Check) coding capability</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="link-adaptation">
<properties>
<help>VHT link adaptation capabilities</help>
<completionHelp>
<list>unsolicited both</list>
</completionHelp>
<valueHelp>
<format>unsolicited</format>
<description>Station provides only unsolicited VHT MFB</description>
</valueHelp>
<valueHelp>
<format>both</format>
<description>Station can provide VHT MFB in response to VHT MRQ and unsolicited VHT MFB</description>
</valueHelp>
<constraint>
<regex>(unsolicited|both)</regex>
</constraint>
<constraintErrorMessage>Invalid capability item</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="max-mpdu-exp">
<properties>
<help>Set the maximum length of A-MPDU pre-EOF padding that the station can receive</help>
<valueHelp>
<format>u32:0-7</format>
<description>Maximum length of A-MPDU pre-EOF padding = 2 pow(13 + x) -1 octets</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-7"/>
</constraint>
</properties>
</leafNode>
<leafNode name="max-mpdu">
<properties>
<help>Increase Maximum MPDU length to 7991 or 11454 octets (otherwise: 3895 octets)</help>
<completionHelp>
<list>7991 11454</list>
</completionHelp>
<valueHelp>
<format>7991</format>
<description>ncrease Maximum MPDU length to 7991 octets</description>
</valueHelp>
<valueHelp>
<format>11454</format>
<description>ncrease Maximum MPDU length to 11454 octets</description>
</valueHelp>
<constraint>
<regex>(7991|11454)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="short-gi">
<properties>
<help>Short GI capabilities</help>
<completionHelp>
<list>80 160</list>
</completionHelp>
<valueHelp>
<format>80</format>
<description>Short GI for 80 MHz</description>
</valueHelp>
<valueHelp>
<format>160</format>
<description>Short GI for 160 MHz</description>
</valueHelp>
<constraint>
<regex>(80|160)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
<node name="stbc">
<properties>
<help>Support for sending and receiving PPDU using STBC (Space Time Block Coding)</help>
</properties>
<children>
<leafNode name="rx">
<properties>
<help>Enable receiving PPDU using STBC (Space Time Block Coding)</help>
<valueHelp>
<format>[1-4]+</format>
<description>Number of spacial streams that can use RX STBC</description>
</valueHelp>
<constraint>
<regex>[1-4]+</regex>
</constraint>
<constraintErrorMessage>Invalid capability item</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="tx">
<properties>
<help>Enable sending PPDU using STBC (Space Time Block Coding)</help>
<valueless/>
</properties>
</leafNode>
</children>
</node>
<leafNode name="tx-powersave">
<properties>
<help>Enable VHT TXOP Power Save Mode</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="vht-cf">
<properties>
<help>Station supports receiving VHT variant HT Control field</help>
<valueless/>
</properties>
</leafNode>
</children>
</node>
</children>
</node>
<leafNode name="channel">
<properties>
<help>Wireless radio channel</help>
<valueHelp>
<format>0</format>
<description>Automatic Channel Selection (ACS)</description>
</valueHelp>
<valueHelp>
<format>u32:1-14</format>
<description>2.4Ghz (802.11 b/g/n) Channel</description>
</valueHelp>
<valueHelp>
<format>u32:34-173</format>
<description>5Ghz (802.11 a/h/j/n/ac) Channel</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-0 --range 1-14 --range 34-173"/>
</constraint>
</properties>
<defaultValue>0</defaultValue>
</leafNode>
<leafNode name="country-code">
<properties>
<help>Indicate country in which device is operating</help>
<completionHelp>
<list>us eu jp de uk cn es fr ru</list>
</completionHelp>
<valueHelp>
<format>txt</format>
<description>ISO/IEC 3166-1 Country Code</description>
</valueHelp>
<constraint>
<regex>[a-z][a-z]</regex>
</constraint>
<constraintErrorMessage>Invalid ISO/IEC 3166-1 Country Code</constraintErrorMessage>
</properties>
</leafNode>
#include <include/interface/description.xml.i>
#include <include/interface/dhcp-options.xml.i>
#include <include/interface/dhcpv6-options.xml.i>
<leafNode name="disable-broadcast-ssid">
<properties>
<help>Disable broadcast of SSID from access-point</help>
<valueless/>
</properties>
</leafNode>
#include <include/interface/disable-link-detect.xml.i>
#include <include/interface/disable.xml.i>
#include <include/interface/vrf.xml.i>
<leafNode name="expunge-failing-stations">
<properties>
<help>Disassociate stations based on excessive transmission failures</help>
<valueless/>
</properties>
</leafNode>
#include <include/interface/ipv4-options.xml.i>
#include <include/interface/ipv6-options.xml.i>
#include <include/interface/hw-id.xml.i>
<leafNode name="isolate-stations">
<properties>
<help>Isolate stations on the AP so they cannot see each other</help>
<valueless/>
</properties>
</leafNode>
#include <include/interface/mac.xml.i>
<leafNode name="max-stations">
<properties>
<help>Maximum number of wireless radio stations. Excess stations will be rejected upon authentication request.</help>
<valueHelp>
<format>u32:1-2007</format>
<description>Number of allowed stations</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-2007"/>
</constraint>
<constraintErrorMessage>Number of stations must be between 1 and 2007</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="mgmt-frame-protection">
<properties>
<help>Management Frame Protection (MFP) according to IEEE 802.11w</help>
<completionHelp>
<list>disabled optional required</list>
</completionHelp>
<valueHelp>
<format>disabled</format>
<description>no MFP</description>
</valueHelp>
<valueHelp>
<format>optional</format>
<description>MFP optional</description>
</valueHelp>
<valueHelp>
<format>required</format>
<description>MFP enforced</description>
</valueHelp>
<constraint>
<regex>(disabled|optional|required)</regex>
</constraint>
</properties>
<defaultValue>disabled</defaultValue>
</leafNode>
<leafNode name="mode">
<properties>
<help>Wireless radio mode</help>
<completionHelp>
<list>a b g n ac</list>
</completionHelp>
<valueHelp>
<format>a</format>
<description>802.11a - 54 Mbits/sec</description>
</valueHelp>
<valueHelp>
<format>b</format>
<description>802.11b - 11 Mbits/sec</description>
</valueHelp>
<valueHelp>
<format>g</format>
<description>802.11g - 54 Mbits/sec</description>
</valueHelp>
<valueHelp>
<format>n</format>
<description>802.11n - 600 Mbits/sec</description>
</valueHelp>
<valueHelp>
<format>ac</format>
<description>802.11ac - 1300 Mbits/sec</description>
</valueHelp>
<constraint>
<regex>(a|b|g|n|ac)</regex>
</constraint>
</properties>
<defaultValue>g</defaultValue>
</leafNode>
#include <include/interface/mirror.xml.i>
<leafNode name="physical-device">
<properties>
<help>Wireless physical device</help>
<completionHelp>
<script>${vyos_completion_dir}/list_wireless_phys.sh</script>
</completionHelp>
<constraint>
<validator name="wireless-phy"/>
</constraint>
</properties>
<defaultValue>phy0</defaultValue>
</leafNode>
<leafNode name="reduce-transmit-power">
<properties>
<help>Transmission power reduction in dBm</help>
<valueHelp>
<format>u32:0-255</format>
<description>TX power reduction in dBm</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-255"/>
</constraint>
<constraintErrorMessage>dBm value must be between 0 and 255</constraintErrorMessage>
</properties>
</leafNode>
<node name="security">
<properties>
<help>Wireless security settings</help>
</properties>
<children>
<node name="wep">
<properties>
<help>Wired Equivalent Privacy (WEP) parameters</help>
</properties>
<children>
<leafNode name="key">
<properties>
<help>WEP encryption key</help>
<valueHelp>
<format>txt</format>
<description>Wired Equivalent Privacy key</description>
</valueHelp>
<constraint>
<regex>([a-fA-F0-9]{10}|[a-fA-F0-9]{26}|[a-fA-F0-9]{32})</regex>
</constraint>
<constraintErrorMessage>Invalid WEP key</constraintErrorMessage>
<multi/>
</properties>
</leafNode>
</children>
</node>
<node name="wpa">
<properties>
<help>Wifi Protected Access (WPA) parameters</help>
</properties>
<children>
<leafNode name="cipher">
<properties>
<help>Cipher suite for WPA unicast packets</help>
<completionHelp>
<list>GCMP-256 GCMP CCMP-256 CCMP TKIP</list>
</completionHelp>
<valueHelp>
<format>GCMP-256</format>
<description>AES in Galois/counter mode with 256-bit key</description>
</valueHelp>
<valueHelp>
<format>GCMP</format>
<description>AES in Galois/counter mode with 128-bit key</description>
</valueHelp>
<valueHelp>
<format>CCMP-256</format>
<description>AES in Counter mode with CBC-MAC with 256-bit key</description>
</valueHelp>
<valueHelp>
<format>CCMP</format>
<description>AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] (supported on all WPA2 APs)</description>
</valueHelp>
<valueHelp>
<format>TKIP</format>
<description>Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]</description>
</valueHelp>
<constraint>
<regex>(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)</regex>
</constraint>
<constraintErrorMessage>Invalid cipher selection</constraintErrorMessage>
<multi/>
</properties>
</leafNode>
<leafNode name="group-cipher">
<properties>
<help>Cipher suite for WPA multicast and broadcast packets</help>
<completionHelp>
<list>GCMP-256 GCMP CCMP-256 CCMP TKIP</list>
</completionHelp>
<valueHelp>
<format>GCMP-256</format>
<description>AES in Galois/counter mode with 256-bit key</description>
</valueHelp>
<valueHelp>
<format>GCMP</format>
<description>AES in Galois/counter mode with 128-bit key</description>
</valueHelp>
<valueHelp>
<format>CCMP-256</format>
<description>AES in Counter mode with CBC-MAC with 256-bit key</description>
</valueHelp>
<valueHelp>
<format>CCMP</format>
<description>AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] (supported on all WPA2 APs)</description>
</valueHelp>
<valueHelp>
<format>TKIP</format>
<description>Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]</description>
</valueHelp>
<constraint>
<regex>(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)</regex>
</constraint>
<constraintErrorMessage>Invalid group cipher selection</constraintErrorMessage>
<multi/>
</properties>
</leafNode>
<leafNode name="mode">
<properties>
<help>WPA mode</help>
<completionHelp>
<list>wpa wpa2 wpa+wpa2 wpa3</list>
</completionHelp>
<valueHelp>
<format>wpa</format>
<description>WPA (IEEE 802.11i/D3.0)</description>
</valueHelp>
<valueHelp>
<format>wpa2</format>
<description>WPA2 (full IEEE 802.11i/RSN)</description>
</valueHelp>
<valueHelp>
<format>wpa+wpa2</format>
<description>Allow both WPA and WPA2</description>
</valueHelp>
<constraint>
<regex>(wpa|wpa2|wpa\+wpa2|wpa3)</regex>
</constraint>
<constraintErrorMessage>Unknown WPA mode</constraintErrorMessage>
</properties>
<defaultValue>wpa+wpa2</defaultValue>
</leafNode>
<leafNode name="passphrase">
<properties>
- <help>WPA personal shared pass phrase. If you are
- using special characters in the WPA passphrase then single
- quotes are required.</help>
+ <help>WPA personal shared pass phrase. If you are using special characters in the WPA passphrase then single quotes are required.</help>
<valueHelp>
<format>txt</format>
<description>Passphrase of at least 8 but not more than 63 printable characters</description>
</valueHelp>
<constraint>
<regex>.{8,63}</regex>
</constraint>
<constraintErrorMessage>Invalid WPA pass phrase, must be 8 to 63 printable characters!</constraintErrorMessage>
</properties>
</leafNode>
#include <include/radius-server-ipv4.xml.i>
<node name="radius">
<children>
<tagNode name="server">
<children>
<leafNode name="accounting">
<properties>
<help>Enable RADIUS server to receive accounting info</help>
<valueless/>
</properties>
</leafNode>
</children>
</tagNode>
</children>
</node>
</children>
</node>
</children>
</node>
<leafNode name="ssid">
<properties>
<help>Wireless access-point service set identifier (SSID)</help>
<constraint>
<regex>.{1,32}</regex>
</constraint>
<constraintErrorMessage>Invalid SSID</constraintErrorMessage>
</properties>
</leafNode>
<leafNode name="type">
<properties>
<help>Wireless device type for this interface</help>
<completionHelp>
<list>access-point station monitor</list>
</completionHelp>
<valueHelp>
<format>access-point</format>
<description>Access-point forwards packets between other nodes</description>
</valueHelp>
<valueHelp>
<format>station</format>
<description>Connects to another access point</description>
</valueHelp>
<valueHelp>
<format>monitor</format>
<description>Passively monitor all packets on the frequency/channel</description>
</valueHelp>
<constraint>
<regex>(access-point|station|monitor)</regex>
</constraint>
<constraintErrorMessage>Type must be access-point, station or monitor</constraintErrorMessage>
</properties>
<defaultValue>monitor</defaultValue>
</leafNode>
#include <include/interface/redirect.xml.i>
#include <include/interface/vif.xml.i>
#include <include/interface/vif-s.xml.i>
</children>
</tagNode>
</children>
</node>
</interfaceDefinition>