diff --git a/smoketest/configs/pppoe-server b/smoketest/configs/pppoe-server
index bfbef4a34..ff5815e29 100644
--- a/smoketest/configs/pppoe-server
+++ b/smoketest/configs/pppoe-server
@@ -1,100 +1,101 @@
interfaces {
ethernet eth0 {
address dhcp
}
ethernet eth1 {
address 192.168.0.1/24
}
ethernet eth2 {
}
loopback lo {
}
}
nat {
source {
rule 100 {
outbound-interface eth0
source {
address 192.168.0.0/24
}
translation {
address masquerade
}
}
}
}
service {
pppoe-server {
access-concentrator ACN
authentication {
local-users {
username foo {
password bar
rate-limit {
download 20480
upload 10240
}
}
}
mode local
}
client-ip-pool {
- start 192.168.0.100
- stop 192.168.0.200
+ subnet 10.0.0.0/24
+ subnet 10.0.1.0/24
+ subnet 10.0.2.0/24
}
gateway-address 192.168.0.2
interface eth1 {
}
interface eth2 {
vlan-id 10
vlan-id 20
vlan-range 30-40
vlan-range 50-60
}
name-server 192.168.0.1
}
ssh {
}
}
system {
config-management {
commit-revisions 100
}
console {
device ttyS0 {
speed 115200
}
}
host-name vyos
login {
user vyos {
authentication {
encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0
plaintext-password ""
}
}
}
ntp {
server 0.pool.ntp.org {
}
server 1.pool.ntp.org {
}
server 2.pool.ntp.org {
}
}
syslog {
global {
facility all {
level info
}
facility protocols {
level debug
}
}
}
}
// Warning: Do not remove the following line.
// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@1:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@13:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@6:salt@1:snmp@2:ssh@2:sstp@3:system@19:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webgui@1:webproxy@2:zone-policy@1"
// Release version: 1.3-rolling-202010260127
diff --git a/src/migration-scripts/l2tp/4-to-5 b/src/migration-scripts/l2tp/4-to-5
index fe8ab357e..496dc83d6 100755
--- a/src/migration-scripts/l2tp/4-to-5
+++ b/src/migration-scripts/l2tp/4-to-5
@@ -1,77 +1,87 @@
#!/usr/bin/env python3
#
# Copyright (C) 2023 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# - move all pool to named pools
# 'start-stop' migrate to namedpool 'default-range-pool'
# 'subnet' migrate to namedpool 'default-subnet-pool'
# 'default-subnet-pool' is the next pool for 'default-range-pool'
import os
from sys import argv
from sys import exit
from vyos.configtree import ConfigTree
if len(argv) < 2:
print("Must specify file name!")
exit(1)
file_name = argv[1]
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
base = ['vpn', 'l2tp', 'remote-access']
pool_base = base + ['client-ip-pool']
if not config.exists(base):
exit(0)
if not config.exists(pool_base):
exit(0)
default_pool = ''
range_pool_name = 'default-range-pool'
-subnet_pool_name = 'default-subnet-pool'
+subnet_base_name = 'default-subnet-pool'
+number = 1
+subnet_pool_name = f'{subnet_base_name}-{number}'
+prev_subnet_pool = subnet_pool_name
if config.exists(pool_base + ['subnet']):
- subnet = config.return_value(pool_base + ['subnet'])
- config.delete(pool_base + ['subnet'])
- config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
default_pool = subnet_pool_name
+ for subnet in config.return_values(pool_base + ['subnet']):
+ config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
+ if prev_subnet_pool != subnet_pool_name:
+ config.set(pool_base + [prev_subnet_pool, 'next-pool'],
+ value=subnet_pool_name)
+ prev_subnet_pool = subnet_pool_name
+ number += 1
+ subnet_pool_name = f'{subnet_base_name}-{number}'
+
+ config.delete(pool_base + ['subnet'])
if config.exists(pool_base + ['start']) and config.exists(pool_base + ['stop']):
start_ip = config.return_value(pool_base + ['start'])
stop_ip = config.return_value(pool_base + ['stop'])
ip_range = f'{start_ip}-{stop_ip}'
config.delete(pool_base + ['start'])
config.delete(pool_base + ['stop'])
config.set(pool_base + [range_pool_name, 'range'], value=ip_range)
if default_pool:
config.set(pool_base + [range_pool_name, 'next-pool'],
- value=subnet_pool_name)
+ value=default_pool)
default_pool = range_pool_name
if default_pool:
config.set(base + ['default-pool'], value=default_pool)
# format as tag node
config.set_tag(pool_base)
try:
with open(file_name, 'w') as f:
f.write(config.to_string())
except OSError as e:
print("Failed to save the modified config: {}".format(e))
exit(1)
diff --git a/src/migration-scripts/pppoe-server/6-to-7 b/src/migration-scripts/pppoe-server/6-to-7
index 34996d8fe..d856c1f34 100755
--- a/src/migration-scripts/pppoe-server/6-to-7
+++ b/src/migration-scripts/pppoe-server/6-to-7
@@ -1,111 +1,122 @@
#!/usr/bin/env python3
#
# Copyright (C) 2023 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# - move all pool to named pools
# 'start-stop' migrate to namedpool 'default-range-pool'
# 'subnet' migrate to namedpool 'default-subnet-pool'
# 'default-subnet-pool' is the next pool for 'default-range-pool'
# - There is only one gateway-address, take the first which is configured
# - default-pool by migration.
# 1. If authentication mode = 'local' then it is first named pool.
# If there are not named pools, namedless pool will be default.
# 2. If authentication mode = 'radius' then namedless pool will be default
import os
from sys import argv
from sys import exit
from vyos.configtree import ConfigTree
if len(argv) < 2:
print("Must specify file name!")
exit(1)
file_name = argv[1]
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
base = ['service', 'pppoe-server']
pool_base = base + ['client-ip-pool']
if not config.exists(base):
exit(0)
if not config.exists(pool_base):
exit(0)
default_pool = ''
range_pool_name = 'default-range-pool'
-subnet_pool_name = 'default-subnet-pool'
+
+subnet_base_name = 'default-subnet-pool'
+number = 1
+subnet_pool_name = f'{subnet_base_name}-{number}'
+prev_subnet_pool = subnet_pool_name
#Default nameless pools migrations
if config.exists(pool_base + ['subnet']):
- subnet = config.return_value(pool_base + ['subnet'])
- config.delete(pool_base + ['subnet'])
- config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
default_pool = subnet_pool_name
+ for subnet in config.return_values(pool_base + ['subnet']):
+ config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
+ if prev_subnet_pool != subnet_pool_name:
+ config.set(pool_base + [prev_subnet_pool, 'next-pool'],
+ value=subnet_pool_name)
+ prev_subnet_pool = subnet_pool_name
+ number += 1
+ subnet_pool_name = f'{subnet_base_name}-{number}'
+
+ config.delete(pool_base + ['subnet'])
if config.exists(pool_base + ['start']) and config.exists(pool_base + ['stop']):
start_ip = config.return_value(pool_base + ['start'])
stop_ip = config.return_value(pool_base + ['stop'])
ip_range = f'{start_ip}-{stop_ip}'
config.delete(pool_base + ['start'])
config.delete(pool_base + ['stop'])
config.set(pool_base + [range_pool_name, 'range'], value=ip_range)
if default_pool:
config.set(pool_base + [range_pool_name, 'next-pool'],
- value=subnet_pool_name)
+ value=default_pool)
default_pool = range_pool_name
gateway = ''
if config.exists(base + ['gateway-address']):
gateway = config.return_value(base + ['gateway-address'])
#named pool migration
namedpools_base = pool_base + ['name']
if config.exists(namedpools_base):
if config.exists(base + ['authentication', 'mode']):
if config.return_value(base + ['authentication', 'mode']) == 'local':
if config.list_nodes(namedpools_base):
default_pool = config.list_nodes(namedpools_base)[0]
for pool_name in config.list_nodes(namedpools_base):
pool_path = namedpools_base + [pool_name]
if config.exists(pool_path + ['subnet']):
subnet = config.return_value(pool_path + ['subnet'])
config.set(pool_base + [pool_name, 'range'], value=subnet)
if config.exists(pool_path + ['next-pool']):
next_pool = config.return_value(pool_path + ['next-pool'])
config.set(pool_base + [pool_name, 'next-pool'], value=next_pool)
if not gateway:
if config.exists(pool_path + ['gateway-address']):
gateway = config.return_value(pool_path + ['gateway-address'])
config.delete(namedpools_base)
if gateway:
config.set(base + ['gateway-address'], value=gateway)
if default_pool:
config.set(base + ['default-pool'], value=default_pool)
# format as tag node
config.set_tag(pool_base)
try:
with open(file_name, 'w') as f:
f.write(config.to_string())
except OSError as e:
print("Failed to save the modified config: {}".format(e))
exit(1)
diff --git a/src/migration-scripts/sstp/4-to-5 b/src/migration-scripts/sstp/4-to-5
index 0f332e04f..3a86c79ec 100755
--- a/src/migration-scripts/sstp/4-to-5
+++ b/src/migration-scripts/sstp/4-to-5
@@ -1,60 +1,71 @@
#!/usr/bin/env python3
#
# Copyright (C) 2023 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# - move all pool to named pools
# 'subnet' migrate to namedpool 'default-subnet-pool'
# 'default-subnet-pool' is the next pool for 'default-range-pool'
import os
from sys import argv
from sys import exit
from vyos.configtree import ConfigTree
if len(argv) < 2:
print("Must specify file name!")
exit(1)
file_name = argv[1]
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
base = ['vpn', 'sstp']
pool_base = base + ['client-ip-pool']
if not config.exists(base):
exit(0)
if not config.exists(pool_base):
exit(0)
-subnet_pool_name = 'default-subnet-pool'
+subnet_base_name = 'default-subnet-pool'
+number = 1
+subnet_pool_name = f'{subnet_base_name}-{number}'
+prev_subnet_pool = subnet_pool_name
if config.exists(pool_base + ['subnet']):
- subnet = config.return_value(pool_base + ['subnet'])
+ default_pool = subnet_pool_name
+ for subnet in config.return_values(pool_base + ['subnet']):
+ config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
+ if prev_subnet_pool != subnet_pool_name:
+ config.set(pool_base + [prev_subnet_pool, 'next-pool'],
+ value=subnet_pool_name)
+ prev_subnet_pool = subnet_pool_name
+ number += 1
+ subnet_pool_name = f'{subnet_base_name}-{number}'
+
config.delete(pool_base + ['subnet'])
- config.set(pool_base + [subnet_pool_name, 'range'], value=subnet)
- config.set(base + ['default-pool'], value=subnet_pool_name)
+ config.set(base + ['default-pool'], value=default_pool)
# format as tag node
config.set_tag(pool_base)
try:
with open(file_name, 'w') as f:
f.write(config.to_string())
except OSError as e:
print("Failed to save the modified config: {}".format(e))
exit(1)