diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2
index 585db93eb..d76994c47 100644
--- a/data/templates/ids/suricata.j2
+++ b/data/templates/ids/suricata.j2
@@ -1,1280 +1,1280 @@
%YAML 1.1
---
# Suricata configuration file. In addition to the comments describing all
# options in this file, full documentation can be found at:
# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
#
# This configuration file generated by:
# Suricata 6.0.10
##
## Step 1: Inform Suricata about your network
##
vars:
# more specific is better for alert accuracy and performance
address-groups:
{% for (name, value) in suricata['address_group'] %}
{{ name }}: "[{{ value | join(',') }}]"
{% endfor %}
port-groups:
{% for (name, value) in suricata['port_group'] %}
{{ name }}: "[{{ value | join(',') }}]"
{% endfor %}
##
## Step 2: Select outputs to enable
##
# The default logging directory. Any log or output file will be
# placed here if it's not specified with a full path name. This can be
# overridden with the -l command line parameter.
default-log-dir: /var/log/suricata/
# Configure the type of alert (and other) logging you would like.
{% if suricata.log is vyos_defined %}
outputs:
{% if suricata.log.eve is vyos_defined %}
# Extensible Event Format (nicknamed EVE) event log in JSON format
- eve-log:
enabled: yes
filetype: {{ suricata.log.eve.filetype }} #regular|syslog|unix_dgram|unix_stream|redis
filename: {{ suricata.log.eve.filename }}
types:
{% if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %}
- alert:
tagged-packets: yes
{% endif %}
{% if "http" in suricata.log.eve.type %}
- http:
enabled: yes
extended: yes
{% endif %}
{% if "tls" in suricata.log.eve.type %}
- tls:
enabled: yes
extended: yes # enable this for extended logging information
{% endif %}
{% for protocol in suricata.log.eve.type %}
{% if protocol not in ["alert","http","tls"] %}
- {{ protocol }}:
enabled: yes
{% endif %}
{% endfor %}
{% endif %}
{% endif %}
##
## Step 3: Configure common capture settings
##
## See "Advanced Capture Options" below for more options, including Netmap
## and PF_RING.
##
# Linux high speed capture support
af-packet:
{% for interface in suricata.interface %}
- interface: {{ interface }}
# Default clusterid. AF_PACKET will load balance packets based on flow.
- cluster-id: 99
+ cluster-id: {{ 100 - loop.index }}
# Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
# This is only supported for Linux kernel > 3.1
# possible value are:
# * cluster_flow: all packets of a given flow are sent to the same socket
# * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket
# * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
# socket. Requires at least Linux 3.14.
# * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
# more info.
# Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
# with capture card using RSS (requires cpu affinity tuning and system IRQ tuning)
cluster-type: cluster_flow
# In some fragmentation cases, the hash can not be computed. If "defrag" is set
# to yes, the kernel will do the needed defragmentation before sending the packets.
defrag: yes
{% endfor %}
# Cross platform libpcap capture support
pcap:
{% for interface in suricata.interface %}
- interface: {{ interface }}
{% endfor %}
# Settings for reading pcap files
pcap-file:
# Possible values are:
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: Suricata uses a statistical approach to detect when
# checksum off-loading is used. (default)
# Warning: 'checksum-validation' must be set to yes to have checksum tested
checksum-checks: auto
# See "Advanced Capture Options" below for more options, including Netmap
# and PF_RING.
##
## Step 4: App Layer Protocol configuration
##
# Configure the app-layer parsers.
#
# The error-policy setting applies to all app-layer parsers. Values can be
# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or
# "ignore" (the default).
#
# The protocol's section details each protocol.
#
# The option "enabled" takes 3 values - "yes", "no", "detection-only".
# "yes" enables both detection and the parser, "no" disables both, and
# "detection-only" enables protocol detection only (parser disabled).
app-layer:
# error-policy: ignore
protocols:
rfb:
enabled: yes
detection-ports:
dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909
# MQTT, disabled by default.
mqtt:
enabled: yes
# max-msg-length: 1mb
# subscribe-topic-match-limit: 100
# unsubscribe-topic-match-limit: 100
# Maximum number of live MQTT transactions per flow
# max-tx: 4096
krb5:
enabled: yes
snmp:
enabled: yes
ikev2:
enabled: yes
tls:
enabled: yes
detection-ports:
dp: 443
# Generate JA3 fingerprint from client hello. If not specified it
# will be disabled by default, but enabled if rules require it.
#ja3-fingerprints: auto
# What to do when the encrypted communications start:
# - default: keep tracking TLS session, check for protocol anomalies,
# inspect tls_* keywords. Disables inspection of unmodified
# 'content' signatures.
# - bypass: stop processing this flow as much as possible. No further
# TLS parsing and inspection. Offload flow bypass to kernel
# or hardware if possible.
# - full: keep tracking and inspection as normal. Unmodified content
# keyword signatures are inspected as well.
#
# For best performance, select 'bypass'.
#
#encryption-handling: default
dcerpc:
enabled: yes
ftp:
enabled: yes
# memcap: 64mb
rdp:
enabled: yes
ssh:
enabled: yes
#hassh: yes
# HTTP2: Experimental HTTP 2 support. Disabled by default.
http2:
enabled: no
# use http keywords on HTTP2 traffic
http1-rules: no
smtp:
enabled: yes
raw-extraction: no
# Configure SMTP-MIME Decoder
mime:
# Decode MIME messages from SMTP transactions
# (may be resource intensive)
# This field supersedes all others because it turns the entire
# process on or off
decode-mime: yes
# Decode MIME entity bodies (ie. Base64, quoted-printable, etc.)
decode-base64: yes
decode-quoted-printable: yes
# Maximum bytes per header data value stored in the data structure
# (default is 2000)
header-value-depth: 2000
# Extract URLs and save in state data structure
extract-urls: yes
# Set to yes to compute the md5 of the mail body. You will then
# be able to journalize it.
body-md5: no
# Configure inspected-tracker for file_data keyword
inspected-tracker:
content-limit: 100000
content-inspect-min-size: 32768
content-inspect-window: 4096
imap:
enabled: detection-only
smb:
enabled: yes
detection-ports:
dp: 139, 445
# Stream reassembly size for SMB streams. By default track it completely.
#stream-depth: 0
nfs:
enabled: yes
tftp:
enabled: yes
dns:
tcp:
enabled: yes
detection-ports:
dp: 53
udp:
enabled: yes
detection-ports:
dp: 53
http:
enabled: yes
# memcap: Maximum memory capacity for HTTP
# Default is unlimited, values can be 64mb, e.g.
# default-config: Used when no server-config matches
# personality: List of personalities used by default
# request-body-limit: Limit reassembly of request body for inspection
# by http_client_body & pcre /P option.
# response-body-limit: Limit reassembly of response body for inspection
# by file_data, http_server_body & pcre /Q option.
#
# For advanced options, see the user guide
# server-config: List of server configurations to use if address matches
# address: List of IP addresses or networks for this block
# personality: List of personalities used by this block
#
# Then, all the fields from default-config can be overloaded
#
# Currently Available Personalities:
# Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
# IIS_7_0, IIS_7_5, Apache_2
libhtp:
default-config:
personality: IDS
# Can be specified in kb, mb, gb. Just a number indicates
# it's in bytes.
request-body-limit: 100kb
response-body-limit: 100kb
# inspection limits
request-body-minimal-inspect-size: 32kb
request-body-inspect-window: 4kb
response-body-minimal-inspect-size: 40kb
response-body-inspect-window: 16kb
# response body decompression (0 disables)
response-body-decompress-layer-limit: 2
# auto will use http-body-inline mode in IPS mode, yes or no set it statically
http-body-inline: auto
# Decompress SWF files.
# Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
# compress-depth:
# Specifies the maximum amount of data to decompress,
# set 0 for unlimited.
# decompress-depth:
# Specifies the maximum amount of decompressed data to obtain,
# set 0 for unlimited.
swf-decompression:
enabled: yes
type: both
compress-depth: 100kb
decompress-depth: 100kb
# Use a random value for inspection sizes around the specified value.
# This lowers the risk of some evasion techniques but could lead
# to detection change between runs. It is set to 'yes' by default.
#randomize-inspection-sizes: yes
# If "randomize-inspection-sizes" is active, the value of various
# inspection size will be chosen from the [1 - range%, 1 + range%]
# range
# Default value of "randomize-inspection-range" is 10.
#randomize-inspection-range: 10
# decoding
double-decode-path: no
double-decode-query: no
# Can enable LZMA decompression
#lzma-enabled: false
# Memory limit usage for LZMA decompression dictionary
# Data is decompressed until dictionary reaches this size
#lzma-memlimit: 1mb
# Maximum decompressed size with a compression ratio
# above 2048 (only LZMA can reach this ratio, deflate cannot)
#compression-bomb-limit: 1mb
# Maximum time spent decompressing a single transaction in usec
#decompression-time-limit: 100000
server-config:
#- apache:
# address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
# personality: Apache_2
# # Can be specified in kb, mb, gb. Just a number indicates
# # it's in bytes.
# request-body-limit: 4096
# response-body-limit: 4096
# double-decode-path: no
# double-decode-query: no
#- iis7:
# address:
# - 192.168.0.0/24
# - 192.168.10.0/24
# personality: IIS_7_0
# # Can be specified in kb, mb, gb. Just a number indicates
# # it's in bytes.
# request-body-limit: 4096
# response-body-limit: 4096
# double-decode-path: no
# double-decode-query: no
# Note: Modbus probe parser is minimalist due to the limited usage in the field.
# Only Modbus message length (greater than Modbus header length)
# and protocol ID (equal to 0) are checked in probing parser
# It is important to enable detection port and define Modbus port
# to avoid false positives
modbus:
# How many unanswered Modbus requests are considered a flood.
# If the limit is reached, the app-layer-event:modbus.flooded; will match.
#request-flood: 500
enabled: no
detection-ports:
dp: 502
# According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
# is recommended to keep the TCP connection opened with a remote device
# and not to open and close it for each MODBUS/TCP transaction. In that
# case, it is important to set the depth of the stream reassembling as
# unlimited (stream.reassembly.depth: 0)
# Stream reassembly size for modbus. By default track it completely.
stream-depth: 0
# DNP3
dnp3:
enabled: no
detection-ports:
dp: 20000
# SCADA EtherNet/IP and CIP protocol support
enip:
enabled: no
detection-ports:
dp: 44818
sp: 44818
ntp:
enabled: yes
dhcp:
enabled: yes
sip:
enabled: yes
# Limit for the maximum number of asn1 frames to decode (default 256)
asn1-max-frames: 256
# Datasets default settings
# datasets:
# # Default fallback memcap and hashsize values for datasets in case these
# # were not explicitly defined.
# defaults:
# memcap: 100mb
# hashsize: 2048
##############################################################################
##
## Advanced settings below
##
##############################################################################
##
## Run Options
##
# Run Suricata with a specific user-id and group-id:
#run-as:
# user: suri
# group: suri
# Some logging modules will use that name in event as identifier. The default
# value is the hostname
#sensor-name: suricata
# Default location of the pid file. The pid file is only used in
# daemon mode (start Suricata with -D). If not running in daemon mode
# the --pidfile command line option must be used to create a pid file.
#pid-file: /var/run/suricata.pid
# Daemon working directory
# Suricata will change directory to this one if provided
# Default: "/"
#daemon-directory: "/"
# Umask.
# Suricata will use this umask if it is provided. By default it will use the
# umask passed on by the shell.
#umask: 022
# Suricata core dump configuration. Limits the size of the core dump file to
# approximately max-dump. The actual core dump size will be a multiple of the
# page size. Core dumps that would be larger than max-dump are truncated. On
# Linux, the actual core dump size may be a few pages larger than max-dump.
# Setting max-dump to 0 disables core dumping.
# Setting max-dump to 'unlimited' will give the full core dump file.
# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
# to be 'unlimited'.
coredump:
max-dump: unlimited
# If the Suricata box is a router for the sniffed networks, set it to 'router'. If
# it is a pure sniffing setup, set it to 'sniffer-only'.
# If set to auto, the variable is internally switched to 'router' in IPS mode
# and 'sniffer-only' in IDS mode.
# This feature is currently only used by the reject* keywords.
host-mode: auto
# Number of packets preallocated per thread. The default is 1024. A higher number
# will make sure each CPU will be more easily kept busy, but may negatively
# impact caching.
#max-pending-packets: 1024
# Runmode the engine should use. Please check --list-runmodes to get the available
# runmodes for each packet acquisition method. Default depends on selected capture
# method. 'workers' generally gives best performance.
#runmode: autofp
# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
#
# Supported schedulers are:
#
# hash - Flow assigned to threads using the 5-7 tuple hash.
# ippair - Flow assigned to threads using addresses only.
#
#autofp-scheduler: hash
# Preallocated size for each packet. Default is 1514 which is the classical
# size for pcap on Ethernet. You should adjust this value to the highest
# packet size (MTU + hardware header) on your system.
#default-packet-size: 1514
# Unix command socket that can be used to pass commands to Suricata.
# An external tool can then connect to get information from Suricata
# or trigger some modifications of the engine. Set enabled to yes
# to activate the feature. In auto mode, the feature will only be
# activated in live capture mode. You can use the filename variable to set
# the file name of the socket.
unix-command:
enabled: yes
filename: /run/suricata/suricata.socket
# Magic file. The extension .mgc is added to the value here.
#magic-file: /usr/share/file/magic
#magic-file:
# GeoIP2 database file. Specify path and filename of GeoIP2 database
# if using rules with "geoip" rule option.
#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
legacy:
uricontent: enabled
##
## Detection settings
##
# Set the order of alerts based on actions
# The default order is pass, drop, reject, alert
# action-order:
# - pass
# - drop
# - reject
# - alert
# Define maximum number of possible alerts that can be triggered for the same
# packet. Default is 15
#packet-alert-max: 15
# IP Reputation
#reputation-categories-file: /etc/suricata/iprep/categories.txt
#default-reputation-path: /etc/suricata/iprep
#reputation-files:
# - reputation.list
# When run with the option --engine-analysis, the engine will read each of
# the parameters below, and print reports for each of the enabled sections
# and exit. The reports are printed to a file in the default log dir
# given by the parameter "default-log-dir", with engine reporting
# subsection below printing reports in its own report file.
engine-analysis:
# enables printing reports for fast-pattern for every rule.
rules-fast-pattern: yes
# enables printing reports for each rule
rules: yes
#recursion and match limits for PCRE where supported
pcre:
match-limit: 3500
match-limit-recursion: 1500
##
## Advanced Traffic Tracking and Reconstruction Settings
##
# Host specific policies for defragmentation and TCP stream
# reassembly. The host OS lookup is done using a radix tree, just
# like a routing table so the most specific entry matches.
host-os-policy:
# Make the default policy windows.
windows: [0.0.0.0/0]
bsd: []
bsd-right: []
old-linux: []
linux: []
old-solaris: []
solaris: []
hpux10: []
hpux11: []
irix: []
macos: []
vista: []
windows2k3: []
# Defrag settings:
# The memcap-policy value can be "drop-flow", "pass-flow", "bypass",
# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default).
defrag:
memcap: 32mb
# memcap-policy: ignore
hash-size: 65536
trackers: 65535 # number of defragmented flows to follow
max-frags: 65535 # number of fragments to keep (higher than trackers)
prealloc: yes
timeout: 60
# Enable defrag per host settings
# host-config:
#
# - dmz:
# timeout: 30
# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
#
# - lan:
# timeout: 45
# address:
# - 192.168.0.0/24
# - 192.168.10.0/24
# - 172.16.14.0/24
# Flow settings:
# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
# for flow allocation inside the engine. You can change this value to allow
# more memory usage for flows.
# The hash-size determines the size of the hash used to identify flows inside
# the engine, and by default the value is 65536.
# At startup, the engine can preallocate a number of flows, to get better
# performance. The number of flows preallocated is 10000 by default.
# emergency-recovery is the percentage of flows that the engine needs to
# prune before clearing the emergency state. The emergency state is activated
# when the memcap limit is reached, allowing new flows to be created, but
# pruning them with the emergency timeouts (they are defined below).
# If the memcap is reached, the engine will try to prune flows
# with the default timeouts. If it doesn't find a flow to prune, it will set
# the emergency bit and it will try again with more aggressive timeouts.
# If that doesn't work, then it will try to kill the oldest flows using
# last time seen flows.
# The memcap can be specified in kb, mb, gb. Just a number indicates it's
# in bytes.
# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet",
# "pass-packet", "reject" or "ignore" (which is the default).
flow:
memcap: 128mb
#memcap-policy: ignore
hash-size: 65536
prealloc: 10000
emergency-recovery: 30
#managers: 1 # default to one flow manager
#recyclers: 1 # default to one flow recycler thread
# This option controls the use of VLAN ids in the flow (and defrag)
# hashing. Normally this should be enabled, but in some (broken)
# setups where both sides of a flow are not tagged with the same VLAN
# tag, we can ignore the VLAN id's in the flow hashing.
vlan:
use-for-tracking: true
# Specific timeouts for flows. Here you can specify the timeouts that the
# active flows will wait to transit from the current state to another, on each
# protocol. The value of "new" determines the seconds to wait after a handshake or
# stream startup before the engine frees the data of that flow it doesn't
# change the state to established (usually if we don't receive more packets
# of that flow). The value of "established" is the amount of
# seconds that the engine will wait to free the flow if that time elapses
# without receiving new packets or closing the connection. "closed" is the
# amount of time to wait after a flow is closed (usually zero). "bypassed"
# timeout controls locally bypassed flows. For these flows we don't do any other
# tracking. If no packets have been seen after this timeout, the flow is discarded.
#
# There's an emergency mode that will become active under attack circumstances,
# making the engine to check flow status faster. This configuration variables
# use the prefix "emergency-" and work similar as the normal ones.
# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
# icmp.
flow-timeouts:
default:
new: 30
established: 300
closed: 0
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-closed: 0
emergency-bypassed: 50
tcp:
new: 60
established: 600
closed: 60
bypassed: 100
emergency-new: 5
emergency-established: 100
emergency-closed: 10
emergency-bypassed: 50
udp:
new: 30
established: 300
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-bypassed: 50
icmp:
new: 30
established: 300
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-bypassed: 50
# Stream engine settings. Here the TCP stream tracking and reassembly
# engine is configured.
#
# stream:
# memcap: 64mb # Can be specified in kb, mb, gb. Just a
# # number indicates it's in bytes.
# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
# # "drop-packet", "pass-packet", "reject" or
# # "ignore" default is "ignore"
# checksum-validation: yes # To validate the checksum of received
# # packet. If csum validation is specified as
# # "yes", then packets with invalid csum values will not
# # be processed by the engine stream/app layer.
# # Warning: locally generated traffic can be
# # generated without checksum due to hardware offload
# # of checksum. You can control the handling of checksum
# # on a per-interface basis via the 'checksum-checks'
# # option
# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
# midstream: false # don't allow midstream session pickups
# midstream-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
# # "drop-packet", "pass-packet", "reject" or
# # "ignore" default is "ignore"
# async-oneside: false # don't enable async stream handling
# inline: no # stream inline mode
# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
# max-synack-queued: 5 # Max different SYN/ACKs to queue
# bypass: no # Bypass packets when stream.reassembly.depth is reached.
# # Warning: first side to reach this triggers
# # the bypass.
#
# reassembly:
# memcap: 256mb # Can be specified in kb, mb, gb. Just a number
# # indicates it's in bytes.
# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
# # "drop-packet", "pass-packet", "reject" or
# # "ignore" default is "ignore"
# depth: 1mb # Can be specified in kb, mb, gb. Just a number
# # indicates it's in bytes.
# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
# # this size. Can be specified in kb, mb,
# # gb. Just a number indicates it's in bytes.
# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
# # this size. Can be specified in kb, mb,
# # gb. Just a number indicates it's in bytes.
# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
# # This lowers the risk of some evasion techniques but could lead
# # to detection change between runs. It is set to 'yes' by default.
# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
# # calculation for toclient-chunk-size.
# # Default value of randomize-chunk-range is 10.
#
# raw: yes # 'Raw' reassembly enabled or disabled.
# # raw is for content inspection by detection
# # engine.
#
# segment-prealloc: 2048 # number of segments preallocated per thread
#
# check-overlap-different-data: true|false
# # check if a segment contains different data
# # than what we've already seen for that
# # position in the stream.
# # This is enabled automatically if inline mode
# # is used or when stream-event:reassembly_overlap_different_data;
# # is used in a rule.
#
stream:
memcap: 64mb
#memcap-policy: ignore
checksum-validation: yes # reject incorrect csums
#midstream: false
#midstream-policy: ignore
inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
reassembly:
memcap: 256mb
#memcap-policy: ignore
depth: 1mb # reassemble 1mb into a stream
toserver-chunk-size: 2560
toclient-chunk-size: 2560
randomize-chunk-size: yes
#randomize-chunk-range: 10
#raw: yes
#segment-prealloc: 2048
#check-overlap-different-data: true
# Host table:
#
# Host table is used by the tagging and per host thresholding subsystems.
#
host:
hash-size: 4096
prealloc: 1000
memcap: 32mb
# IP Pair table:
#
# Used by xbits 'ippair' tracking.
#
#ippair:
# hash-size: 4096
# prealloc: 1000
# memcap: 32mb
# Decoder settings
decoder:
# Teredo decoder is known to not be completely accurate
# as it will sometimes detect non-teredo as teredo.
teredo:
enabled: true
# ports to look for Teredo. Max 4 ports. If no ports are given, or
# the value is set to 'any', Teredo detection runs on _all_ UDP packets.
ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
# VXLAN decoder is assigned to up to 4 UDP ports. By default only the
# IANA assigned port 4789 is enabled.
vxlan:
enabled: true
ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'.
# VNTag decode support
vntag:
enabled: false
# Geneve decoder is assigned to up to 4 UDP ports. By default only the
# IANA assigned port 6081 is enabled.
geneve:
enabled: true
ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'.
# maximum number of decoder layers for a packet
# max-layers: 16
##
## Performance tuning and profiling
##
# The detection engine builds internal groups of signatures. The engine
# allows us to specify the profile to use for them, to manage memory in an
# efficient way keeping good performance. For the profile keyword you
# can use the words "low", "medium", "high" or "custom". If you use custom,
# make sure to define the values in the "custom-values" section.
# Usually you would prefer medium/high/low.
#
# "sgh mpm-context", indicates how the staging should allot mpm contexts for
# the signature groups. "single" indicates the use of a single context for
# all the signature group heads. "full" indicates a mpm-context for each
# group head. "auto" lets the engine decide the distribution of contexts
# based on the information the engine gathers on the patterns from each
# group head.
#
# The option inspection-recursion-limit is used to limit the recursive calls
# in the content inspection code. For certain payload-sig combinations, we
# might end up taking too much time in the content inspection code.
# If the argument specified is 0, the engine uses an internally defined
# default limit. When a value is not specified, there are no limits on the recursion.
detect:
profile: medium
custom-values:
toclient-groups: 3
toserver-groups: 25
sgh-mpm-context: auto
inspection-recursion-limit: 3000
# If set to yes, the loading of signatures will be made after the capture
# is started. This will limit the downtime in IPS mode.
#delayed-detect: yes
prefilter:
# default prefiltering setting. "mpm" only creates MPM/fast_pattern
# engines. "auto" also sets up prefilter engines for other keywords.
# Use --list-keywords=all to see which keywords support prefiltering.
default: mpm
# the grouping values above control how many groups are created per
# direction. Port whitelisting forces that port to get its own group.
# Very common ports will benefit, as well as ports with many expensive
# rules.
grouping:
#tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
#udp-whitelist: 53, 135, 5060
profiling:
# Log the rules that made it past the prefilter stage, per packet
# default is off. The threshold setting determines how many rules
# must have made it past pre-filter for that rule to trigger the
# logging.
#inspect-logging-threshold: 200
grouping:
dump-to-disk: false
include-rules: false # very verbose
include-mpm-stats: false
# Select the multi pattern algorithm you want to run for scan/search the
# in the engine.
#
# The supported algorithms are:
# "ac" - Aho-Corasick, default implementation
# "ac-bs" - Aho-Corasick, reduced memory implementation
# "ac-ks" - Aho-Corasick, "Ken Steele" variant
# "hs" - Hyperscan, available when built with Hyperscan support
#
# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
# available, "ac" otherwise.
#
# The mpm you choose also decides the distribution of mpm contexts for
# signature groups, specified by the conf - "detect.sgh-mpm-context".
# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
# to be set to "single", because of ac's memory requirements, unless the
# ruleset is small enough to fit in memory, in which case one can
# use "full" with "ac". The rest of the mpms can be run in "full" mode.
mpm-algo: auto
# Select the matching algorithm you want to use for single-pattern searches.
#
# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
# available if Suricata has been built with Hyperscan support).
#
# The default of "auto" will use "hs" if available, otherwise "bm".
spm-algo: auto
# Suricata is multi-threaded. Here the threading can be influenced.
threading:
set-cpu-affinity: no
# Tune cpu affinity of threads. Each family of threads can be bound
# to specific CPUs.
#
# These 2 apply to the all runmodes:
# management-cpu-set is used for flow timeout handling, counters
# worker-cpu-set is used for 'worker' threads
#
# Additionally, for autofp these apply:
# receive-cpu-set is used for capture threads
# verdict-cpu-set is used for IPS verdict threads
#
cpu-affinity:
- management-cpu-set:
cpu: [ 0 ] # include only these CPUs in affinity settings
- receive-cpu-set:
cpu: [ 0 ] # include only these CPUs in affinity settings
- worker-cpu-set:
cpu: [ "all" ]
mode: "exclusive"
# Use explicitly 3 threads and don't compute number by using
# detect-thread-ratio variable:
# threads: 3
prio:
low: [ 0 ]
medium: [ "1-2" ]
high: [ 3 ]
default: "medium"
#- verdict-cpu-set:
# cpu: [ 0 ]
# prio:
# default: "high"
#
# By default Suricata creates one "detect" thread per available CPU/CPU core.
# This setting allows controlling this behaviour. A ratio setting of 2 will
# create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
# will result in 4 detect threads. If values below 1 are used, less threads
# are created. So on a dual core CPU a setting of 0.5 results in 1 detect
# thread being created. Regardless of the setting at a minimum 1 detect
# thread will always be created.
#
detect-thread-ratio: 1.0
#
# By default, the per-thread stack size is left to its default setting. If
# the default thread stack size is too small, use the following configuration
# setting to change the size. Note that if any thread's stack size cannot be
# set to this value, a fatal error occurs.
#
# Generally, the per-thread stack-size should not exceed 8MB.
#stack-size: 8mb
# Luajit has a strange memory requirement, its 'states' need to be in the
# first 2G of the process' memory.
#
# 'luajit.states' is used to control how many states are preallocated.
# State use: per detect script: 1 per detect thread. Per output script: 1 per
# script.
luajit:
states: 128
# Profiling settings. Only effective if Suricata has been built with
# the --enable-profiling configure flag.
#
profiling:
# Run profiling for every X-th packet. The default is 1, which means we
# profile every packet. If set to 1000, one packet is profiled for every
# 1000 received.
#sample-rate: 1000
# rule profiling
rules:
# Profiling can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: yes
filename: rule_perf.log
append: yes
# Sort options: ticks, avgticks, checks, matches, maxticks
# If commented out all the sort options will be used.
#sort: avgticks
# Limit the number of sids for which stats are shown at exit (per sort).
limit: 10
# output to json
json: yes
# per keyword profiling
keywords:
enabled: yes
filename: keyword_perf.log
append: yes
prefilter:
enabled: yes
filename: prefilter_perf.log
append: yes
# per rulegroup profiling
rulegroups:
enabled: yes
filename: rule_group_perf.log
append: yes
# packet profiling
packets:
# Profiling can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: yes
filename: packet_stats.log
append: yes
# per packet csv output
csv:
# Output can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: no
filename: packet_stats.csv
# profiling of locking. Only available when Suricata was built with
# --enable-profiling-locks.
locks:
enabled: no
filename: lock_stats.log
append: yes
pcap-log:
enabled: no
filename: pcaplog_stats.log
append: yes
##
## Netfilter integration
##
# When running in NFQ inline mode, it is possible to use a simulated
# non-terminal NFQUEUE verdict.
# This permits sending all needed packet to Suricata via this rule:
# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
# And below, you can have your standard filtering ruleset. To activate
# this mode, you need to set mode to 'repeat'
# If you want a packet to be sent to another queue after an ACCEPT decision
# set the mode to 'route' and set next-queue value.
# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance
# by processing several packets before sending a verdict (worker runmode only).
# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel
# accept the packet if Suricata is not able to keep pace.
# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
# directly accept all packets of a flow once a packet has been marked.
nfq:
# mode: accept
# repeat-mark: 1
# repeat-mask: 1
# bypass-mark: 1
# bypass-mask: 1
# route-queue: 2
# batchcount: 20
# fail-open: yes
#nflog support
nflog:
# netlink multicast group
# (the same as the iptables --nflog-group param)
# Group 0 is used by the kernel, so you can't use it
- group: 2
# netlink buffer size
buffer-size: 18432
# put default value here
- group: default
# set number of packets to queue inside kernel
qthreshold: 1
# set the delay before flushing packet in the kernel's queue
qtimeout: 100
# netlink max buffer size
max-size: 20000
##
## Advanced Capture Options
##
# General settings affecting packet capture
capture:
# disable NIC offloading. It's restored when Suricata exits.
# Enabled by default.
#disable-offloading: false
#
# disable checksum validation. Same as setting '-k none' on the
# commandline.
#checksum-validation: none
# Netmap support
#
# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has
# built-in Netmap support or compile and install the Netmap module and appropriate
# NIC driver for your Linux system.
# To reach maximum throughput disable all receive-, segmentation-,
# checksum- offloading on your NIC (using ethtool or similar).
# Disabling TX checksum offloading is *required* for connecting OS endpoint
# with NIC endpoint.
# You can find more information at https://github.com/luigirizzo/netmap
#
netmap:
- interface: default
# PF_RING configuration: for use with native PF_RING support
# for more info see http://www.ntop.org/products/pf_ring/
pfring:
- interface: default
#threads: 2
# For FreeBSD ipfw(8) divert(4) support.
# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
# Additionally, you need to have an ipfw rule for the engine to see
# the packets from ipfw. For Example:
#
# ipfw add 100 divert 8000 ip from any to any
#
# N.B. This example uses "8000" -- this number must mach the values
# you passed on the command line, i.e., -d 8000
#
ipfw:
# Reinject packets at the specified ipfw rule number. This config
# option is the ipfw rule number AT WHICH rule processing continues
# in the ipfw processing system after the engine has finished
# inspecting the packet for acceptance. If no rule number is specified,
# accepted packets are reinjected at the divert rule which they entered
# and IPFW rule processing continues. No check is done to verify
# this will rule makes sense so care must be taken to avoid loops in ipfw.
#
## The following example tells the engine to reinject packets
# back into the ipfw firewall AT rule number 5500:
#
# ipfw-reinjection-rule-number: 5500
napatech:
# When use_all_streams is set to "yes" the initialization code will query
# the Napatech service for all configured streams and listen on all of them.
# When set to "no" the streams config array will be used.
#
# This option necessitates running the appropriate NTPL commands to create
# the desired streams prior to running Suricata.
#use-all-streams: no
# The streams to listen on when auto-config is disabled or when and threading
# cpu-affinity is disabled. This can be either:
# an individual stream (e.g. streams: [0])
# or
# a range of streams (e.g. streams: ["0-3"])
#
streams: ["0-3"]
# Stream stats can be enabled to provide fine grain packet and byte counters
# for each thread/stream that is configured.
#
enable-stream-stats: no
# When auto-config is enabled the streams will be created and assigned
# automatically to the NUMA node where the thread resides. If cpu-affinity
# is enabled in the threading section. Then the streams will be created
# according to the number of worker threads specified in the worker-cpu-set.
# Otherwise, the streams array is used to define the streams.
#
# This option is intended primarily to support legacy configurations.
#
# This option cannot be used simultaneously with either "use-all-streams"
# or "hardware-bypass".
#
auto-config: yes
# Enable hardware level flow bypass.
#
hardware-bypass: yes
# Enable inline operation. When enabled traffic arriving on a given port is
# automatically forwarded out its peer port after analysis by Suricata.
#
inline: no
# Ports indicates which Napatech ports are to be used in auto-config mode.
# these are the port IDs of the ports that will be merged prior to the
# traffic being distributed to the streams.
#
# When hardware-bypass is enabled the ports must be configured as a segment.
# specify the port(s) on which upstream and downstream traffic will arrive.
# This information is necessary for the hardware to properly process flows.
#
# When using a tap configuration one of the ports will receive inbound traffic
# for the network and the other will receive outbound traffic. The two ports on a
# given segment must reside on the same network adapter.
#
# When using a SPAN-port configuration the upstream and downstream traffic
# arrives on a single port. This is configured by setting the two sides of the
# segment to reference the same port. (e.g. 0-0 to configure a SPAN port on
# port 0).
#
# port segments are specified in the form:
# ports: [0-1,2-3,4-5,6-6,7-7]
#
# For legacy systems when hardware-bypass is disabled this can be specified in any
# of the following ways:
#
# a list of individual ports (e.g. ports: [0,1,2,3])
#
# a range of ports (e.g. ports: [0-3])
#
# "all" to indicate that all ports are to be merged together
# (e.g. ports: [all])
#
# This parameter has no effect if auto-config is disabled.
#
ports: [0-1,2-3]
# When auto-config is enabled the hashmode specifies the algorithm for
# determining to which stream a given packet is to be delivered.
# This can be any valid Napatech NTPL hashmode command.
#
# The most common hashmode commands are: hash2tuple, hash2tuplesorted,
# hash5tuple, hash5tuplesorted and roundrobin.
#
# See Napatech NTPL documentation other hashmodes and details on their use.
#
# This parameter has no effect if auto-config is disabled.
#
hashmode: hash5tuplesorted
##
## Configure Suricata to load Suricata-Update managed rules.
##
# As VyOS leverages suricata-update, the default rule path points to the
# generated rules instead of the built-in rules.
#
# default-rule-path: /etc/suricata/rules
default-rule-path: /var/lib/suricata/rules
rule-files:
- suricata.rules
##
## Auxiliary configuration files.
##
# As VyOS leverages suricata-update, the classification file points to the
# generated classification instead of the built-in one.
#
# classification-file: /etc/suricata/classification.config
classification-file: /var/lib/suricata/rules/classification.config
reference-config-file: /etc/suricata/reference.config
# threshold-file: /etc/suricata/threshold.config
##
## Include other configs
##
# Includes: Files included here will be handled as if they were in-lined
# in this configuration file. Files with relative pathnames will be
# searched for in the same directory as this configuration file. You may
# use absolute pathnames too.
# You can specify more than 2 configuration files, if needed.
#include: include1.yaml
#include: include2.yaml