Living in Norway but originally from Sweden.
With more than 10 years of experience with Cisco networking products, I am now migrating over to open source alternatives. I have created my own company and started to evangelize about open source infrastructure solutions.
I have tested out NHRPv6 on FRR as well and found out that it seems impossible to get it work.
Sorry for late reply. It probably don't but I haven't had time to test it yet. It's not a big issue anyway.
for me on VyOS 1.5-rolling-202503030030 it works if you first remove the ospf configuration, then delete the protocols:
I'm just sharing my thoughts here: Could it have something to do with the fact that the IPv4 prefix is a /32? why does it have to be a /32 anyway (when NHRP is configured)? On Cisco IOS there is no such restrictions.
I can see that on VyOS 1.5-rolling-202503030030, the network type "point-to-multipoint" and "non-broadcast" is available. But not "point-to-multipoint non-broadcast"
vyos@LBS-RO1# set protocols ospf int eth1 network Possible completions: broadcast Broadcast network type non-broadcast Non-broadcast network type point-to-multipoint Point-to-multipoint network type point-to-point Point-to-point network type
vyos@LBS-RO1# set protocols ospf int eth1 network point-to-multipoint Possible completions: <Enter> Execute the current command
It is possible to configure from FRR: