vpp.py
No OneTemporary
Actions

Size

28 KB

Referenced Files

None

Subscribers

None

vpp.py
View Options

	#!/usr/bin/env python3
	#
	# Copyright (C) VyOS Inc.
	#
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License along
	# with this program; if not, write to the Free Software Foundation, Inc.,
	# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

	from pathlib import Path

	from pyroute2.iproute import IPRoute

	try:
	from vpp_papi import VPPIOError, VPPValueError
	except ImportError: # pylint: disable=import-error
	VPPIOError = VPPValueError = None

	from vyos import ConfigError
	from vyos import airbag
	from vyos.base import Warning
	from vyos.config import Config, config_dict_merge
	from vyos.configdep import set_dependents, call_dependents
	from vyos.configdict import node_changed, leaf_node_changed
	from vyos.ifconfig import Section
	from vyos.template import render
	from vyos.utils.boot import boot_configuration_complete
	from vyos.utils.process import call
	from vyos.utils.system import sysctl_read, sysctl_apply

	from vyos.vpp import VPPControl
	from vyos.vpp import control_host
	from vyos.vpp.config_deps import deps_xconnect_dict
	from vyos.vpp.config_verify import (
	verify_dev_driver,
	verify_vpp_minimum_cpus,
	verify_vpp_minimum_memory,
	verify_vpp_settings_cpu_and_corelist_workers,
	verify_vpp_settings_cpu_corelist_workers,
	verify_vpp_cpu_main_core,
	verify_vpp_settings_cpu_skip_cores,
	verify_vpp_settings_cpu_workers,
	verify_vpp_nat44_workers,
	verify_vpp_memory,
	verify_vpp_statseg_size,
	verify_vpp_interfaces_dpdk_num_queues,
	verify_vpp_host_resources,
	verify_routes_count,
	)
	from vyos.vpp.config_filter import iface_filter_eth
	from vyos.vpp.utils import EthtoolGDrvinfo
	from vyos.vpp.configdb import JSONStorage

	airbag.enable()

	service_name = 'vpp'
	service_conf = Path(f'/run/vpp/{service_name}.conf')
	systemd_override = '/run/systemd/system/vpp.service.d/10-override.conf'

	dependency_interface_type_map = {
	'vpp_interfaces_bonding': 'bonding',
	'vpp_interfaces_bridge': 'bridge',
	'vpp_interfaces_ethernet': 'ethernet',
	'vpp_interfaces_geneve': 'geneve',
	'vpp_interfaces_gre': 'gre',
	'vpp_interfaces_ipip': 'ipip',
	'vpp_interfaces_loopback': 'loopback',
	'vpp_interfaces_vxlan': 'vxlan',
	'vpp_interfaces_xconnect': 'xconnect',
	}

	# dict of drivers that needs to be overrided
	override_drivers: dict[str, str] = {
	'hv_netvsc': 'uio_hv_generic',
	'ena': 'vfio-pci',
	}

	# drivers that does not use PCIe addresses
	not_pci_drv: list[str] = ['hv_netvsc']

	# drivers that support interrupt RX mode for DPDK and XDP
	drivers_support_interrupt: dict[str, list] = {
	'atlantic': ['dpdk', 'xdp'],
	'bnx2x': ['dpdk'],
	'e1000': ['dpdk'],
	'ena': ['dpdk', 'xdp'],
	'i40e': ['dpdk', 'xdp'],
	'ice': ['dpdk', 'xdp'],
	'igb': ['xdp'],
	'igc': ['dpdk', 'xdp'],
	'ixgbe': ['dpdk', 'xdp'],
	'qede': ['dpdk', 'xdp'],
	'vmxnet3': ['xdp'],
	'virtio_net': ['xdp'],
	}


	def get_config(config=None):
	# use persistent config to store interfaces data between executions
	# this is required because some interfaces after they are connected
	# to VPP is really hard or impossible to restore without knowing
	# their original parameters (like IDs)
	persist_config = JSONStorage('vpp_conf')
	eth_ifaces_persist: dict[str, dict[str, str]] = persist_config.read(
	'eth_ifaces', {}
	)

	if config:
	conf = config
	else:
	conf = Config()

	base = ['vpp']
	base_settings = ['vpp', 'settings']

	# find interfaces removed from VPP
	effective_config = conf.get_config_dict(
	base,
	key_mangling=('-', '_'),
	effective=True,
	get_first_key=True,
	no_tag_node_value_mangle=True,
	)

	xconn_members = deps_xconnect_dict(conf)

	removed_ifaces = []
	tmp = node_changed(conf, base_settings + ['interface'])
	if tmp:
	for removed_iface in tmp:
	to_append = {
	'iface_name': removed_iface,
	'driver': effective_config['settings']['interface'][removed_iface][
	'driver'
	],
	}
	removed_ifaces.append(to_append)
	# add an interface to a list of interfaces that need
	# to be reinitialized after the commit
	set_dependents('ethernet', conf, removed_iface)

	# NAT dependency
	if conf.exists(['vpp', 'nat44']):
	set_dependents('vpp_nat', conf)
	if conf.exists(['vpp', 'nat', 'cgnat']):
	set_dependents('vpp_nat_cgnat', conf)

	# sFlow dependency
	if conf.exists(['vpp', 'sflow']):
	set_dependents('vpp_sflow', conf)

	# ACL dependency
	if conf.exists(['vpp', 'acl']):
	set_dependents('vpp_acl', conf)

	if not conf.exists(base):
	return {
	'removed_ifaces': removed_ifaces,
	'xconn_members': xconn_members,
	'persist_config': eth_ifaces_persist,
	}

	config = conf.get_config_dict(
	base,
	get_first_key=True,
	key_mangling=('-', '_'),
	no_tag_node_value_mangle=True,
	)

	# Get default values which we need to conditionally update into the
	# dictionary retrieved.
	default_values = conf.get_config_defaults(**config.kwargs, recursive=True)

	# delete 'xdp-options' from defaults if driver is DPDK
	for iface, iface_config in config.get('settings', {}).get('interface', {}).items():
	if iface_config.get('driver') == 'dpdk':
	del default_values['settings']['interface'][iface]['xdp_options']

	config = config_dict_merge(default_values, config)

	# Ignore default XML values if config doesn't exists
	if not conf.exists(base_settings + ['ipsec']):
	del config['settings']['ipsec']

	# add running config
	if effective_config:
	config['effective'] = effective_config

	if 'settings' in config:
	if 'interface' in config['settings']:
	for iface, iface_config in config['settings']['interface'].items():
	# Driver must be configured to continue
	if 'driver' not in iface_config:
	raise ConfigError(
	f'"driver" must be configured for {iface} interface!'
	)

	old_driver = leaf_node_changed(
	conf, base_settings + ['interface', iface, 'driver']
	)

	# Get current kernel module, required for extra verification and
	# logic for VMBus interfaces
	config['settings']['interface'][iface]['kernel_module'] = (
	EthtoolGDrvinfo(iface).driver
	)

	# filter unsupported config nodes
	iface_filter_eth(conf, iface)
	set_dependents('ethernet', conf, iface)
	# Interfaces with changed driver should be removed/readded
	if old_driver and old_driver[0] == 'dpdk':
	removed_ifaces.append(
	{
	'iface_name': iface,
	'driver': 'dpdk',
	}
	)

	# Get PCI address or device ID
	if iface_config['driver'] == 'dpdk':
	if 'dpdk_options' not in iface_config:
	iface_config['dpdk_options'] = {}
	# Check in a persistent config first
	id_from_persisten_conf = eth_ifaces_persist.get(iface, {}).get(
	'dev_id'
	)
	if id_from_persisten_conf:
	iface_config['dpdk_options']['dev_id'] = id_from_persisten_conf
	else:
	try:
	iface_to_search = iface
	if old_driver and old_driver[0] == 'xdp':
	iface_to_search = f'defunct_{iface}'
	iface_config['dpdk_options']['dev_id'] = (
	control_host.get_dev_id(iface_to_search)
	)
	except Exception:
	# Return empty address if all attempts failed
	# We will catch this in verify()
	iface_config['dpdk_options']['dev_id'] = ''
	# prepare XDP interface parameters
	if iface_config['driver'] == 'xdp':
	xdp_api_params = {
	'rxq_size': int(iface_config['xdp_options']['rx_queue_size']),
	'txq_size': int(iface_config['xdp_options']['tx_queue_size']),
	}
	if iface_config['xdp_options']['num_rx_queues'] == 'all':
	xdp_api_params['rxq_num'] = 0
	else:
	xdp_api_params['rxq_num'] = int(
	iface_config['xdp_options']['num_rx_queues']
	)
	if 'zero-copy' in iface_config['xdp_options']:
	xdp_api_params['mode'] = 'zero-copy'
	if 'zero-copy' in iface_config['xdp_options']:
	xdp_api_params['flags'] = 'no_syscall_lock'
	iface_config['xdp_api_params'] = xdp_api_params

	if removed_ifaces:
	config['removed_ifaces'] = removed_ifaces
	config['xconn_members'] = xconn_members

	# Dependencies
	for dependency, interface_type in dependency_interface_type_map.items():
	# if conf.exists(base + ['interfaces', interface_type]):
	if effective_config.get('interfaces', {}).get(interface_type):
	for iface, iface_config in (
	config.get('interfaces', {}).get(interface_type, {}).items()
	):
	# filter unsupported config nodes
	if interface_type == 'ethernet':
	iface_filter_eth(conf, iface)
	set_dependents(dependency, conf, iface)

	# Save important info about all interfaces that cannot be retrieved later
	# Add new interfaces (only if they are first time seen in a config)
	for iface, iface_config in config.get('settings', {}).get('interface', {}).items():
	if iface not in effective_config.get('settings', {}).get('interface', {}):
	eth_ifaces_persist[iface] = {
	'original_driver': config['settings']['interface'][iface][
	'kernel_module'
	],
	}
	eth_ifaces_persist[iface]['bus_id'] = control_host.get_bus_name(iface)
	eth_ifaces_persist[iface]['dev_id'] = control_host.get_dev_id(iface)

	# Get kernel settings for hugepages
	kernel_memory_settings = conf.get_config_dict(
	['system', 'option', 'kernel', 'memory'],
	key_mangling=('-', '_'),
	get_first_key=True,
	no_tag_node_value_mangle=True,
	)
	config['kernel_memory_settings'] = kernel_memory_settings

	# Return to config dictionary
	config['persist_config'] = eth_ifaces_persist

	return config


	def verify(config):
	# bail out early - looks like removal from running config
	if not config or ('removed_ifaces' in config and 'settings' not in config):
	return None

	if 'settings' not in config:
	raise ConfigError('"settings interface" is required but not set!')

	if 'interface' not in config['settings']:
	raise ConfigError('"settings interface" is required but not set!')

	# check if the system meets minimal requirements
	verify_vpp_minimum_cpus()
	verify_vpp_minimum_memory()

	# check if Ethernet interfaces exist
	ethernet_ifaces = Section.interfaces('ethernet')
	for iface in config['settings']['interface'].keys():
	if iface not in ethernet_ifaces:
	raise ConfigError(f'Interface {iface} does not exist or is not Ethernet!')

	# Resource usage checks
	workers = 0

	if 'cpu' in config['settings']:
	cpu_settings = config['settings']['cpu']

	# Check if there are enough CPU cores to skip according to config
	if 'skip_cores' in cpu_settings:
	skip_cores = int(cpu_settings['skip_cores'])
	verify_vpp_settings_cpu_skip_cores(skip_cores)

	# Check whether the workers and corelist-workers are configured properly
	verify_vpp_settings_cpu_and_corelist_workers(cpu_settings)

	# Check if there are enough CPU cores to add workers
	if 'workers' in cpu_settings:
	workers = verify_vpp_settings_cpu_workers(cpu_settings)

	if 'main_core' in cpu_settings:
	verify_vpp_cpu_main_core(cpu_settings)

	# Check the CPU main core not falling to the corelist-workers
	if 'corelist_workers' in cpu_settings:
	workers = verify_vpp_settings_cpu_corelist_workers(cpu_settings)

	if 'workers' in config['settings']['nat44']:
	verify_vpp_nat44_workers(
	workers=workers, nat44_workers=config['settings']['nat44']['workers']
	)

	# Check if available memory is enough for current VPP config
	verify_vpp_memory(config)

	if 'max_map_count' in config['settings'].get('host_resources', {}):
	verify_vpp_host_resources(config)

	if 'statseg' in config['settings']:
	verify_vpp_statseg_size(config['settings'])

	# ensure DPDK/XDP settings are properly configured
	for iface, iface_config in config['settings']['interface'].items():
	# check if selected driver is supported, but only for new interfaces
	if iface not in config.get('effective', {}).get('settings', {}).get(
	'interface', {}
	):
	if not verify_dev_driver(iface, iface_config['driver']):
	raise ConfigError(
	f'Driver {iface_config["driver"]} is not compatible with interface {iface}!'
	)
	if iface_config['driver'] == 'xdp' and 'xdp_options' in iface_config:
	if iface_config['xdp_options']['num_rx_queues'] != 'all':
	Warning(f'Not all RX queues will be connected to VPP for {iface}!')

	if iface_config['driver'] == 'xdp' and 'dpdk_options' in iface_config:
	raise ConfigError('DPDK options are not applicable for XDP driver!')

	if iface_config['driver'] == 'dpdk' and 'xdp_options' in iface_config:
	raise ConfigError('XDP options are not applicable for DPDK driver!')

	if iface_config['driver'] == 'dpdk' and 'dpdk_options' in iface_config:
	if 'num_rx_queues' in iface_config['dpdk_options']:
	rx_queues = int(iface_config['dpdk_options']['num_rx_queues'])
	verify_vpp_interfaces_dpdk_num_queues(
	qtype='receive', num_queues=rx_queues, workers=workers
	)

	if 'num_tx_queues' in iface_config['dpdk_options']:
	tx_queues = int(iface_config['dpdk_options']['num_tx_queues'])
	verify_vpp_interfaces_dpdk_num_queues(
	qtype='transmit', num_queues=tx_queues, workers=workers
	)

	# RX-mode verification
	rx_mode = iface_config.get('rx_mode')
	if rx_mode and rx_mode != 'polling':
	# By default drivers operate in polling mode. Not all NIC drivers support
	# RX mode interrupt and adaptive
	driver = config.get('persist_config').get(iface).get('original_driver')
	if (
	driver not in drivers_support_interrupt
	or iface_config['driver'] not in drivers_support_interrupt[driver]
	):
	raise ConfigError(
	f'RX mode {rx_mode} is not supported for interface {iface}'
	)

	# check GRE tunnels as part of the bridge, only tunnel-type teb is allowed
	# set vpp interfaces bridge br1 member interface gre1
	# set vpp interfaces gre gre1 tunnel-type teb
	if 'interfaces' in config:
	if 'bridge' in config['interfaces']:
	for iface, iface_config in config['interfaces']['bridge'].items():
	if 'member' in iface_config:
	for member in iface_config['member'].get('interface', []):
	if member.startswith('gre'):
	if (
	'gre' in config['interfaces']
	and config['interfaces']['gre']
	.get(member, {})
	.get('tunnel_type')
	!= 'teb'
	):
	raise ConfigError(
	f'Only tunnel-type teb is allowed for GRE interfaces in bridge {iface}'
	)

	# Only one multipoint GRE tunnel is allowed from the same source address
	# set vpp interfaces gre gre0 mode 'point-to-multipoint'
	# set vpp interfaces gre gre0 remote '0.0.0.0'
	# set vpp interfaces gre gre0 source-address '192.0.2.1'
	# set vpp interfaces gre gre1 mode 'point-to-multipoint'
	# set vpp interfaces gre gre1 remote '0.0.0.0'
	# set vpp interfaces gre gre1 source-address '192.0.2.1'
	if 'gre' in config['interfaces']:
	for iface, iface_config in config['interfaces']['gre'].items():
	if iface_config['mode'] == 'point-to-multipoint':
	for other_iface, other_iface_config in config['interfaces'][
	'gre'
	].items():
	if (
	other_iface_config['mode'] == 'point-to-multipoint'
	and other_iface_config['source_address']
	== iface_config['source_address']
	and iface != other_iface
	):
	raise ConfigError(
	'Only one multipoint GRE tunnel is allowed from the same source address'
	)

	# Check if deleted interfaces are not xconnect memebrs
	for iface_config in config.get('removed_ifaces', []):
	if iface_config['iface_name'] in config.get('xconn_members', {}):
	raise ConfigError(
	f'Interface {iface_config["iface_name"]} is an xconnect member and cannot be removed'
	)

	verify_routes_count(config['settings'], workers)


	def generate(config):
	if not config or ('removed_ifaces' in config and 'settings' not in config):
	# Remove old config and return
	service_conf.unlink(missing_ok=True)
	return None

	render(service_conf, 'vpp/startup.conf.j2', config['settings'])
	render(systemd_override, 'vpp/override.conf.j2', config)

	# apply sysctl values
	# default: https://github.com/FDio/vpp/blob/v23.10/src/vpp/conf/80-vpp.conf
	# vm.nr_hugepages are now configured in section
	# 'set system option kernel memory hugepage-size 2M hugepage-count <count>'
	sysctl_config: dict[str, str] = {
	'vm.max_map_count': config['settings']['host_resources']['max_map_count'],
	'vm.hugetlb_shm_group': '0',
	'kernel.shmmax': config['settings']['host_resources']['shmmax'],
	}
	# we do not want to lower current values
	for sysctl_key, sysctl_value in sysctl_config.items():
	# perform check only for quantitative params
	if sysctl_key == 'vm.hugetlb_shm_group':
	pass
	current_value = sysctl_read(sysctl_key)
	if int(current_value) > int(sysctl_value):
	sysctl_config[sysctl_key] = current_value

	if not sysctl_apply(sysctl_config):
	raise ConfigError('Cannot configure sysctl parameters for VPP')

	return None


	def initialize_interface(iface, driver, iface_config) -> None:
	# DPDK - rescan PCI to use a proper driver
	if driver == 'dpdk' and iface_config['original_driver'] not in not_pci_drv:
	control_host.pci_rescan(iface_config['dev_id'])
	# rename to the proper name
	iface_new_name: str = control_host.get_eth_name(iface_config['dev_id'])
	control_host.rename_iface(iface_new_name, iface)

	# XDP - rename an interface, disable promisc and XDP
	if driver == 'xdp':
	control_host.set_promisc(f'defunct_{iface}', 'off')
	control_host.rename_iface(f'defunct_{iface}', iface)
	control_host.xdp_remove(iface)

	# Rename Mellanox NIC to a normal name
	try:
	if control_host.get_eth_driver(f'defunct_{iface}') == 'mlx5_core':
	control_host.rename_iface(f'defunct_{iface}', iface)
	except FileNotFoundError:
	pass

	# Replace a driver with original for VMBus interfaces and rename it
	if driver == 'dpdk' and iface_config['original_driver'] in override_drivers:
	control_host.override_driver(iface_config['bus_id'], iface_config['dev_id'])
	iface_new_name: str = control_host.get_eth_name(iface_config['dev_id'])
	control_host.rename_iface(iface_new_name, iface)


	def apply(config):
	# Open persistent config
	# It is required for operations with interfaces
	persist_config = JSONStorage('vpp_conf')
	if not config or ('removed_ifaces' in config and 'settings' not in config):
	# Cleanup persistent config
	persist_config.delete()
	# And stop the service
	call(f'systemctl stop {service_name}.service')
	else:
	# Some interfaces required extra preparation before VPP can be started
	if 'settings' in config and 'interface' in config.get('settings'):
	for iface, iface_config in config['settings']['interface'].items():
	if iface_config['driver'] == 'dpdk':
	# ena interfaces require noiommu mode
	if iface_config['kernel_module'] == 'ena':
	control_host.unsafe_noiommu_mode(True)

	if iface_config['kernel_module'] in override_drivers:
	control_host.override_driver(
	config['persist_config'][iface]['bus_id'],
	config['persist_config'][iface]['dev_id'],
	override_drivers[iface_config['kernel_module']],
	)

	call('systemctl daemon-reload')
	call(f'systemctl restart {service_name}.service')

	# Initialize interfaces removed from VPP
	for iface in config.get('removed_ifaces', []):
	initialize_interface(
	iface['iface_name'],
	iface['driver'],
	config['persist_config'][iface['iface_name']],
	)

	# Remove what is not in the config anymore
	if iface['iface_name'] not in config.get('settings', {}).get('interface', {}):
	del config['persist_config'][iface['iface_name']]

	if 'settings' in config and 'interface' in config.get('settings'):
	# connect to VPP
	# must be performed multiple attempts because API is not available
	# immediately after the service restart
	try:
	vpp_control = VPPControl(attempts=20, interval=500)

	# preconfigure LCP plugin
	if 'ignore_kernel_routes' in config.get('settings', {}).get('lcp', {}):
	vpp_control.cli_cmd('lcp param route-no-paths off')
	else:
	vpp_control.cli_cmd('lcp param route-no-paths on')
	# add interfaces
	iproute = IPRoute()
	for iface, iface_config in config['settings']['interface'].items():
	# promisc option for DPDK interfaces
	if iface_config['driver'] == 'dpdk':
	if 'promisc' in iface_config['dpdk_options']:
	if_index = vpp_control.get_sw_if_index(iface)
	vpp_control.api.sw_interface_set_promisc(
	sw_if_index=if_index, promisc_on=True
	)
	# add XDP interfaces
	if iface_config['driver'] == 'xdp':
	control_host.rename_iface(iface, f'defunct_{iface}')
	vpp_control.xdp_iface_create(
	host_if=f'defunct_{iface}',
	name=iface,
	**iface_config['xdp_api_params'],
	)
	# replicate MAC address of a real interface
	real_mac = control_host.get_eth_mac(f'defunct_{iface}')
	vpp_control.set_iface_mac(iface, real_mac)
	if 'promisc' in iface_config['xdp_options']:
	control_host.set_promisc(f'defunct_{iface}', 'on')
	control_host.set_status(f'defunct_{iface}', 'up')
	control_host.flush_ip(f'defunct_{iface}')
	# Rename Mellanox interfaces to hide them and create LCP properly
	if (
	iface in Section.interfaces()
	and control_host.get_eth_driver(iface) == 'mlx5_core'
	):
	control_host.rename_iface(iface, f'defunct_{iface}')
	control_host.set_status(f'defunct_{iface}', 'up')
	control_host.flush_ip(f'defunct_{iface}')
	# Create lcp
	if iface not in Section.interfaces():
	vpp_control.lcp_pair_add(iface, iface)

	# For unknown reasons, if multiple interfaces later try to be
	# initialized by configuration scripts, some of them may stuck
	# in an endless UP/DOWN loop
	# We found two workarounds - pause initialization (requires
	# main code modifications).
	# And this one
	dev_index = iproute.link_lookup(ifname=iface)[0]
	iproute.link('set', index=dev_index, state='up')

	# Set rx-mode. Should be configured after interface state set to UP
	rx_mode = iface_config.get('rx_mode')
	if rx_mode:
	# to hardware side
	vpp_control.iface_rxmode(iface, rx_mode)
	# to kernel side
	lcp_name = vpp_control.lcp_pair_find(vpp_name_hw=iface).get(
	'vpp_name_kernel'
	)
	vpp_control.iface_rxmode(lcp_name, rx_mode)

	# Syncronize routes via LCP
	vpp_control.lcp_resync()

	# NAT44 settings
	nat44_settings = config['settings'].get('nat44', {})

	enable_forwarding = True
	if 'no_forwarding' in nat44_settings:
	enable_forwarding = False
	vpp_control.enable_disable_nat44_forwarding(enable_forwarding)

	vpp_control.set_nat44_session_limit(
	int(nat44_settings.get('session_limit'))
	)

	if nat44_settings.get('workers'):
	bitmask = 0
	for worker_range in nat44_settings['workers']:
	worker_numbers = worker_range.split('-')
	for wid in range(
	int(worker_numbers[0]), int(worker_numbers[-1]) + 1
	):
	bitmask \|= 1 << wid
	vpp_control.set_nat_workers(bitmask)

	except (VPPIOError, VPPValueError) as e:
	# if cannot connect to VPP or an error occurred then
	# we need to stop vpp service and initialize interfaces
	call(f'systemctl stop {service_name}.service')
	for iface, iface_config in config['settings']['interface'].items():
	initialize_interface(
	iface, iface_config['driver'], config['persist_config'][iface]
	)

	raise ConfigError(
	f'An error occurred: {e}. '
	'VPP service will be restarted with the previous configuration'
	)

	# Save persistent config
	if 'persist_config' in config and config['persist_config']:
	persist_config.write('eth_ifaces', config['persist_config'])

	# reinitialize interfaces, but not during the first boot
	if boot_configuration_complete():
	call_dependents()


	if __name__ == '__main__':
	try:
	c = get_config()
	verify(c)
	generate(c)
	apply(c)
	except ConfigError as e:
	print(e)
	exit(1)

File Metadata

Mime Type: text/x-script.python
Expires: Sat, Oct 17, 12:15 AM (1 d, 13 h)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 4379853
Default Alt Text: vpp.py (28 KB)

vpp.pyNo OneTemporaryActions

vpp.pyView Options

File Metadata

Event Timeline

vpp.py
No OneTemporary
Actions

vpp.py
View Options