.. _vyos.vyos.vyos_ospf_interfaces_module: ****************************** vyos.vyos.vyos_ospf_interfaces ****************************** **OSPF Interfaces Resource Module.** Version added: 1.2.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages OSPF configuration of interfaces on devices running VYOS. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of OSPF configuration for interfaces.
address_family
list / elements=dictionary
OSPF settings on the interfaces in address-family context.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Address Family Identifier (AFI) for OSPF settings on the interfaces.
authentication
dictionary
Authentication settings on the interface.
md5_key
dictionary
md5 parameters.
key
string
md5 key.
key_id
integer
key id.
plaintext_password
string
Plain Text password.
bandwidth
integer
Bandwidth of interface (kilobits/sec)
cost
integer
metric associated with interface.
dead_interval
integer
Time interval to detect a dead router.
hello_interval
integer
Timer interval between transmission of hello packets.
ifmtu
integer
interface MTU.
instance
string
Instance ID.
mtu_ignore
boolean
    Choices:
  • no
  • yes
if True, Disable MTU check for Database Description packets.
network
string
Interface type.
passive
boolean
    Choices:
  • no
  • yes
If True, disables forming adjacency.
priority
integer
Interface priority.
retransmit_interval
integer
LSA retransmission interval.
transmit_delay
integer
LSA transmission delay.
name
string
Name/Identifier of the interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration commands | match "set interfaces".
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state the configuration should be left in.

Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # @vyos:~$ show configuration commands | match "ospf" - name: Merge provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: True state: merged # After State: # -------------- # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # "after": [ # " # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ # "set interfaces ethernet eth1 ip ospf transmit-delay 50", # "set interfaces ethernet eth1 ip ospf priority 26", # "set interfaces ethernet eth1 ip ospf network point-to-point", # "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", # "set interfaces bonding bond2 ip ospf transmit-delay 45", # "set interfaces bonding bond2 ip ospf bandwidth 70", # "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", # "set interfaces bonding bond2 ipv6 ospfv3 passive" # ], # Using replaced: # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' - name: Replace provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 - afi: "ipv6" passive: True state: replaced # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf cost '100' # set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' # vyos@vyos:~$ # Module Execution # ---------------- # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ # "set interfaces ethernet eth1 ip ospf cost 100", # "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33", # "delete interfaces ethernet eth1 ip ospf network point-to-point", # "delete interfaces ethernet eth1 ip ospf priority 26", # "delete interfaces ethernet eth1 ip ospf transmit-delay 50", # "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", # "delete interfaces bonding bond2 ip ospf authentication", # "delete interfaces bonding bond2 ip ospf bandwidth 70" # ], # # Using Overridden: # ----------------- # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf cost '100' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' # vyos@vyos:~$ - name: Override device configuration with provided configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 passive: True state: overridden # After State: # ----------- # 200~vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces ethernet eth0 ip ospf cost '100' # set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' # set interfaces ethernet eth0 ipv6 ospfv3 'passive' # vyos@vyos:~$ # # # "after": [ # { # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100, # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39, # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ # "delete interfaces bonding bond2 ip ospf", # "delete interfaces bonding bond2 ipv6 ospfv3", # "delete interfaces ethernet eth1 ip ospf", # "delete interfaces ethernet eth1 ipv6 ospfv3", # "set interfaces ethernet eth0 ip ospf cost 100", # "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33", # "set interfaces ethernet eth0 ipv6 ospfv3 passive" # ], # # Using deleted: # ------------- # before state: # ------------- # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth0 ip ospf cost '100' # set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' # set interfaces ethernet eth0 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # vyos@vyos:~$ - name: Delete device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" state: deleted # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # vyos@vyos:~$ # # # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ # "delete interfaces ethernet eth0 ip ospf", # "delete interfaces ethernet eth0 ipv6 ospfv3" # ], # # Using parsed: # parsed.cfg: # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth0 ip ospf cost '50' # set interfaces ethernet eth0 ip ospf priority '26' # set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33' # set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # - name: parse configs vyos.vyos.vyos_ospf_interfaces: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed # Module Execution: # ---------------- # "parsed": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 50, # "priority": 26 # }, # { # "afi": "ipv6", # "instance": "33", # "mtu_ignore": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # } # ] # Using rendered: # -------------- - name: Render vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: True state: rendered # Module Execution: # ---------------- # "rendered": [ # "set interfaces ethernet eth1 ip ospf transmit-delay 50", # "set interfaces ethernet eth1 ip ospf priority 26", # "set interfaces ethernet eth1 ip ospf network point-to-point", # "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", # "set interfaces bonding bond2 ip ospf transmit-delay 45", # "set interfaces bonding bond2 ip ospf bandwidth 70", # "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", # "set interfaces bonding bond2 ipv6 ospfv3 passive" # ] # # Using Gathered: # -------------- # Native Config: # vyos@vyos:~$ show configuration commands | match "ospf" # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' # set interfaces bonding bond2 ip ospf bandwidth '70' # set interfaces bonding bond2 ip ospf transmit-delay '45' # set interfaces bonding bond2 ipv6 ospfv3 'passive' # set interfaces ethernet eth1 ip ospf network 'point-to-point' # set interfaces ethernet eth1 ip ospf priority '26' # set interfaces ethernet eth1 ip ospf transmit-delay '50' # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' # vyos@vyos:~$ - name: gather configs vyos.vyos.vyos_ospf_interfaces: state: gathered # Module Execution: # ----------------- # "gathered": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], Status ------ Authors ~~~~~~~ - Gomathi Selvi Srinivasan (@GomathiselviS)