1.2.0-alpha-frr-test

vyos@vyos:~$ show configuration 
interfaces {
    ethernet eth0 {
        address dhcp
    }
    loopback lo {
    }
}
service {
    ssh {
        port 22
    }
}
system {
    config-management {
        commit-revisions 20
    }
    console {
        device ttyS0 {
            speed 9600
        }
    }
    login {
        user vyos {
            authentication {
                encrypted-password ****************
                plaintext-password ****************
            }
            level admin
        }
    }
    ntp {
        server 0.pool.ntp.org {
        }
        server 1.pool.ntp.org {
        }
        server 2.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
}
vyos@vyos:~$ configure
[edit]
vyos@vyos# set interfaces bridge br0
[edit]
vyos@vyos# set interfaces ethernet eth1 bridge-group bridge br0
[edit]
vyos@vyos# commit; save; exit
[ interfaces ethernet eth1 bridge-group ]
Adding interface eth1 to bridge br0

[ interfaces ethernet eth1 duplex auto ]
Cannot set new settings: Invalid argument
  not setting autoneg

Saving configuration to '/config/config.boot'...
Done
exit
vyos@vyos:~$ show interfaces 
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface        IP Address                        S/L  Description
---------        ----------                        ---  -----------
br0              -                                 u/D  
eth0             192.168.163.164/22                u/u  
eth1             -                                 u/D  
lo               127.0.0.1/8                       u/u  
                 ::1/128
vyos@vyos:~$ show bridge 
bridge name     bridge id               STP enabled     interfaces
br0             8000.723eba94b2ca       no              eth1
vyos@vyos:~$ show configuration 
interfaces {
    bridge br0 {
    }
    ethernet eth0 {
        address dhcp
    }
    ethernet eth1 {
        bridge-group {
            bridge br0
        }
    }
    loopback lo {
    }
}
service {
    ssh {
        port 22
    }
}
system {
    config-management {
        commit-revisions 20
    }
    console {
        device ttyS0 {
            speed 9600
        }
    }
    login {
        user vyos {
            authentication {
                encrypted-password ****************
                plaintext-password ****************
            }
            level admin
        }
    }
    ntp {
        server 0.pool.ntp.org {
        }
        server 1.pool.ntp.org {
        }
        server 2.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
}

vyos@vyos# commit; save; exit
[ interfaces ethernet eth1 bridge-group ]
Removing interface eth1 from bridge br0

Saving configuration to '/config/config.boot'...
Done
exit
vyos@vyos:~$ show configuration 
interfaces {
    bridge br0 {
    }
    ethernet eth0 {
        address dhcp
    }
    ethernet eth1 {
        bridge-group {
        }
    }
    loopback lo {
    }
}
service {
    ssh {
        port 22
    }
}
system {
    config-management {
        commit-revisions 20
    }
    console {
        device ttyS0 {
            speed 9600
        }
    }
    login {
        user vyos {
            authentication {
                encrypted-password ****************
                plaintext-password ****************
            }
            level admin
        }
    }
    ntp {
        server 0.pool.ntp.org {
        }
        server 1.pool.ntp.org {
        }
        server 2.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
}
vyos@vyos:~$ show version 
Version:          VyOS 999.201711012230
Built by:         dmbaturin@jessiedevel
Built on:         Wed 01 Nov 2017 22:30 UTC
Build ID:         d0c1baf1-ecc3-466e-b632-bd4ca31172e4

Architecture:     x86_64
Boot via:         installed image
System type:      KVM guest

Hardware vendor:  QEMU
Hardware model:   Standard PC (i440FX + PIIX, 1996)
Hardware S/N:     
Hardware UUID:    4CF775F2-CC17-4DBF-8DAD-228015FFD802

Copyright:        VyOS maintainers and contributors