This is a copy of https://forum.vyos.io/t/error-on-adding-a-wireguard-interface-to-ospfv3/13534
and by request of tjh I'm also posting it here.
i have OSPF (ipv4) up and running with some ipsec-vti (+ neighbor’s) and wireguard (passive) interfaces
this is working fine.
now i’m trying to add OSPFv3 (IPv6) to it.
this works with de VTI interfaces:
XXX@rt01# show protocols ospfv3 | strip-private
area 10.10.0.0 {
range xxxx:xxxx:c2c:2bd9::/64 {
advertise
}
range xxxx:xxxx:fd32::/48 {
advertise
}
}
interface lo {
area 10.10.0.0
passive
}
interface vti101 {
area 10.10.0.0
network point-to-point
}
interface vti201 {
area 0.0.0.0
network point-to-point
}
interface vti202 {
area 0.0.0.0
network point-to-point
}
interface vti203 {
area 0.0.0.0
network point-to-point
}
log-adjacency-changes {
detail
}
parameters {
router-id xxx.xxx.255.1
}but when i’m trying to add the wireguard interfaces i’m getting the following error:
rt01# compare
[protocols ospfv3 interface]
+ wg231 {
+ area "10.10.0.0"
+ passive
+ }
[edit]
XXX@rt01# commit
[ protocols ospfv3 ]
VyOS had an issue completing a command.
We are sorry that you encountered a problem while using VyOS.
There are a few things you can do to help us (and yourself):
- Contact us using the online help desk if you have a subscription:
https://support.vyos.io/
- Make sure you are running the latest version of VyOS available at:
https://vyos.net/get/
- Consult the community forum to see how to handle this issue:
https://forum.vyos.io
- Join us on Slack where our users exchange help and advice:
https://vyos.slack.com
When reporting problems, please include as much information as possible:
- do not obfuscate any data (feel free to contact us privately if your
business policy requires it)
- and include all the information presented below
Report time: 2024-01-28 21:41:14
Image version: VyOS 1.5-rolling-202401090834
Release train: current
Built by: [email protected]
Built on: Tue 09 Jan 2024 10:30 UTC
Build UUID: 350f1f79-e581-4dd2-956c-36b7ef1c5e5c
Build commit ID: 92195009af863c
Architecture: x86_64
Boot via: installed image
System type: KVM guest
Hardware vendor: Hetzner
Hardware model: vServer
Hardware S/N: 14585311
Hardware UUID: 156eed2a-0020-4471-ad82-eecfe5de4127
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/protocols_ospfv3.py", line 184, in <module>
apply(c)
File "/usr/libexec/vyos/conf_mode/protocols_ospfv3.py", line 175, in apply
frr_cfg.commit_configuration(ospf6_daemon)
File "/usr/lib/python3/dist-packages/vyos/frr.py", line 482, in commit_configuration
raise ConfigurationNotValid(f'Config commit retry counter ({count_max}) exceeded for {daemon} dameon!')
vyos.frr.ConfigurationNotValid: Config commit retry counter (5) exceeded for ospf6d dameon!
[[protocols ospfv3]] failed
Commit failed
[edit]What gone wrong here?