In the latest rolling version "show vpn ike sa" shows as "IPsec Process NOT Running" even though the process is running:
vyos@vyos# run sh vpn ike sa
IPsec Process NOT Running
[edit]
vyos@vyos# run sh vpn ike sa peer test
IPsec Process NOT Running
vyos@vyos# sudo swanctl -l
test: #2, ESTABLISHED, IKEv1, 23608727f5bca3cf_i* e11bbfea0e653891_r
local '10.0.0.2' @ 10.0.0.2[500]
remote '10.0.0.1' @ 10.0.0.1[500]
AES_CBC-128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_2048
established 21s ago, rekeying in 78509s
test-vti: #4, reqid 1, INSTALLED, TUNNEL, ESP:AES_CBC-128/HMAC_SHA1_96/MODP_14
installed 21s ago, rekeying in 2979s, expires in 3579s
in c4a7c633 (-|0x00000001), 0 bytes, 0 packets
out c59fb259 (-|0x00000001), 0 bytes, 0 packets
local 0.0.0.0/0
remote 0.0.0.0/0
vyos@vyos# run sh vpn ike status
● strongswan.service - strongSwan IPsec IKEv1/IKEv2 daemon using swanctl
Loaded: loaded (/lib/systemd/system/strongswan.service; disabled; preset: )
Active: active (running) since Thu 2023-07-13 08:02:48 UTC; 12min ago
Process: 2739 ExecReload=/usr/sbin/swanctl --reload (code=exited, status=0/)
Process: 2744 ExecReload=/usr/sbin/swanctl --load-all --noprompt (code=exit)
Main PID: 1903 (charon-systemd)
Status: "charon-systemd running, strongSwan 5.9.8, Linux 6.1.38-amd64-vyos"
Tasks: 17 (limit: 1137)
Memory: 16.9M
CPU: 3.136s
CGroup: /system.slice/strongswan.service
└─1903 /usr/sbin/charon-systemd
Jul 13 08:14:47 vyos charon-systemd[1903]: generating INFORMATIONAL_V1 request ]
Jul 13 08:14:47 vyos charon-systemd[1903]: sending packet: from 10.0.0.2[500] t)
Jul 13 08:15:17 vyos charon[1903]: 16[NET] <test|2> received packet: from 10.0.)
vyos@vyos# run sh vpn ipsec status
IPsec Process Running: 1903
vyos@vyos# run sh vpn ipsec sa
Connection State Uptime Bytes In/Out Packets In/Out Remote addrel
------------ ------- -------- -------------- ---------------- -------------
test-vti up 4m59s 0B/0B 0/0 10.0.0.1 4