diff --git a/CHANGELOG.rst b/CHANGELOG.rst index 4ccf0b59..4eac017f 100644 --- a/CHANGELOG.rst +++ b/CHANGELOG.rst @@ -1,391 +1,503 @@ ============================= Vyos Collection Release Notes ============================= .. contents:: Topics +v6.0.0 +====== + +Release Summary +--------------- + +This is the first significant release from the VyOS community for these modules. +This release is focussed on 1.3+ of VyOS and will be the last major release to +support 1.3 fully. Although efforts have been made to maintain compatibility +with the existing vyos collection modules, there have breaking changes where +necessary to configuration parameters. Please review all changes carefully before updating. + +Major Changes +------------- + +- bgp modules - Added support for 1.4+ "system-as". 1.3 embedded as_number is still supported +- vyos bgp modules - Many configuration attributes moved from `bgp_global` to `bgp_address_family` module (see documentation). +- vyos_bgp_address_family - Aligned with version 1.3+ configuration - aggregate_address, maximum_paths, network, and redistribute moved from `bgp_global` module. These are now Address-family specific. Many neighbor attributes also moved from `vyos_bgp_global` to `vyos_bgp_address_family` module. +- vyos_bgp_global - Aligned with version 1.3+ configuration - aggregate_address, maximum_paths, network, and redistribute Removed to `bgp_address_family` module. +- vyos_user - add support for encrypted password specification +- vyos_user - add support for public-key authentication + +Minor Changes +------------- + +- README.md - Add Communication section with Forum information. +- vyos_bgp_address_family - Redistribute, network stanza - added support for modifiers (metric, backdoor etc as per T6829) +- vyos_bgp_global - Added support for `solo` neighbor attribute +- vyos_config - block get_config call if match is set to "none" +- vyos_facts - added `network_os_major_version` to facts +- vyos_firewall_global - Added support for input, output, and forward chains (1.4+) +- vyos_firewall_global - Added support for log-level in state-policy (1.4+) +- vyos_firewall_global - with 1.4+, use the the global keyword to define global firewall rules +- vyos_firewall_interfaces - added support for VIF interfaces +- vyos_firewall_interfaces - enable support for 1.4 firewall +- vyos_firewall_interfaces - expanded firewall interface types to match existing types +- vyos_firewall_rules - Add support for diff mode for rulesets +- vyos_firewall_rules - Added support for 1.4+ firewall rules +- vyos_firewall_rules - Fixed comparing of firewall rules +- vyos_firewall_rules - added support for 1.5+ firewall `match-ipsec-in`, `match-ipsec-out`, `match-none-in`, `match-none-out` +- vyos_firewall_rules - added support for packet-length-exclude for 1.4+ and the states +- vyos_l3_interfaces - make l3_interfaces pick up loopback interfaces +- vyos_lldp_global - address is now addresses, with appropriate coercion for existing address keys +- vyos_ntp_global - Added ntp options for 1.5+ (interleave, ptp) +- vyos_ntp_global - Added support for VyOS 1.4+ (chronyd vs ntpd) +- vyos_ntp_global - Added syntax for allow_client in 1.4+ +- vyos_ospf_interaces - support for 1.4 ospf interfaces +- vyos_ospf_interfaces - add support for VyOS 1.3- virtual interfaces +- vyos_ospf_interfaces - add support for VyOS 1.4+, which moved interface configuration from the interfaces to ospf/ospfv3 interfaces configuration +- vyos_route_maps - add support for as-path-prepend policy option + +Breaking Changes / Porting Guide +-------------------------------- + +- Removed `vyos_logging`. Use `vyos_logging_global` instead. +- lldp_global - if "address" is available, merge will cause it to be added, in contrast to the previous behavior where it was replaced. When used in replace mode, it will remove any existing addresses and replace them with the new one. +- vyos_bgp_address_family - Support for 1.3+ VyOS only +- vyos_bgp_global - Support for 1.3+ VyOS only +- vyos_firewall_rules - removed p2p options as they have been removed prior to 1.3 of VyOS +- vyos_firewall_rules - tcp.flags is now a list with an inversion flag to support 1.4+ firewall rules, but still supports 1.3- +- vyos_lldp_global - civic_address is no longer a valid key (removed prior to 1.3) +- vyos_logging_global - For 1.4, `protocol` is an attribute of the syslog host, not the facility +- vyos_snmp_server - no longer works with versions prior to 1.3 +- vyos_snmp_server - parameter `engine_id` is no longer a `user` or `trap_target` parameter and is now a `snmp_v3` parameter +- vyos_snmp_server - parameters `encrypted-key` and `plaintext-key` are now `encrypted-password` and `plaintext-password` +- vyos_user - explicit support for version 1.3+ only +- vyos_user - removed level (and its alias, role) they were removed in 1.3 + +Deprecated Features +------------------- + +- vyos_bgp_global - no_ipv4_unicast - deprecated for use with VyOS 1.4+, use `ipv4_unicast` instead +- vyos_firewall_interfaces - deprecated for use with VyOS 1.4+, firewalls are no longer connected directly to interfaces. See the Firewall Configuration documentation for how to establish a connection betwen the firewall rulesets and the flow, interface, or zone. +- vyos_lldp_global - `address` is deprecated, use `addresses` instead. To be removed in 7.0.0. +- vyos_logging_global - `protocol` is deprecated for 1.4 and later, use `facility` instead. To be removed in next major version where supprot for 1.3 is removed + +Bugfixes +-------- + +- vyos_config - Fix change detection for recent Vyos versions +- vyos_firewall_global - Fix removing last member of a firewall group. +- vyos_firewall_global - Fixed ipv6 route-redirects and tests +- vyos_firewall_global - Fixed parsing of global-options (1.4+) +- vyos_firewall_global - Fixed state-policy deletion (partial and full) +- vyos_firewall_global - fixed behavior for stanzas processing by facts in 1.4+ (e.g. present/absent stanza vs enable/disable) +- vyos_firewall_global - fixed the facts parsers to include state-policies, redirect +- vyos_firewall_rules - Allow deleting of firewall description. +- vyos_firewall_rules - Fix limit parameter processing +- vyos_firewall_rules - fixed behavior for log, disable attributes +- vyos_firewall_rules - fixed behavior for override and replaced states +- vyos_interfaces - fixed bug where 'replace' would delete an active disable and not reinstate it +- vyos_interfaces - fixed over-zealous handling of disable, which could catch other interface items that are disabled. +- vyos_l3_interfaces - fix delete in interfaces to remove vif completely if in affected interface +- vyos_l3_interfaces - fix override in interfaces to remove vif completely if not present in new config +- vyos_l3_interfaces - fix replace in interfaces to remove vif completely if not present in new config +- vyos_logging_global - Fixed v1.3 and before when `protocol` and `level` were set for the same host +- vyos_ospf_interfaces - fixed get_config to cater for unordered command lists in 1.4+ +- vyos_ospfv2 - passive-interface processing for 1.3- and 1.4+ +- vyos_ospfv3 - added support for adding interfaces to areas +- vyos_static routes - fixed the facts, argspecs, config to include interface-routes +- vyos_user - fix handling of `full-name` in parser and module + +Known Issues +------------ + +- existing code for 1.3 facility protocol and facility level are not compatible, only one will be set and level is the priority. + +Documentation Changes +--------------------- + +- Update module documentation to reflect 1.4+ support + v5.0.0 ====== Release Summary --------------- Starting from this release, the minimum `ansible-core` version that this collection requires is `2.15.0`. The last known version compatible with ansible-core<2.15 is v4.1.0. Major Changes ------------- - Bumping `requires_ansible` to `>=2.15.0`, since previous ansible-core versions are EoL now. Minor Changes ------------- - All GHA workflows have been updated to use ones from ansible-content-actions. - Passes latest ansible-lint with production profile. - Removes deprecation notice for vyos.vyos. - Uncaps supported ansible-core versions, this collection now supports ansible-core>=2.15. v4.1.0 ====== Minor Changes ------------- - vyos-l3_interface_support - Add support for Tunnel, Bridge and Dummy interfaces. (https://github.com/ansible-collections/vyos.vyos/issues/265) Bugfixes -------- - vyos-l3_interface_facts - fixed error when using no-default-link-local option. (https://github.com/ansible-collections/vyos.vyos/issues/295) v4.0.2 ====== Bugfixes -------- - bgp_global - changed to use `neighbor.password` rather than `neighbor.address` (https://github.com/ansible-collections/vyos.vyos/issues/304). Documentation Changes --------------------- - vyos_interfaces - Updated documentation with examples and task output. v4.0.1 ====== Bugfixes -------- - vyos_command - Run commands at least once even when retries is set to 0 (https://github.com/ansible-collections/cisco.nxos/issues/607). v4.0.0 ====== Major Changes ------------- - Use of connection: local and the provider option are no longer valid on any modules in this collection. Minor Changes ------------- - Update fact gathering to support v1.3 show version output Removed Features (previously deprecated) ---------------------------------------- - vyos_interface - use vyos_interfaces instead. - vyos_l3_interface - use vyos_l3_interfaces instead. - vyos_linkagg - use vyos_lag_interfaces instead. - vyos_lldp - use vyos_lldp_global instead. - vyos_lldp_interface - use vyos_lldp_interfaces instead. - vyos_static_route - use vyos_static_routes instead. v3.0.1 ====== Minor Changes ------------- - firewall_rules - icmpv6 type - add support for vyos sw >= 1.4. v3.0.0 ====== Major Changes ------------- - Minimum required ansible.netcommon version is 2.5.1. - Updated base plugin references to ansible.netcommon. - `vyos_facts` - change default gather_subset to `min` from `!config` (https://github.com/ansible-collections/vyos.vyos/issues/231). Minor Changes ------------- - Change preconfig hostname from vyos to vyosuser Bugfixes -------- - Add symlink of modules under plugins/action v2.8.0 ====== Minor Changes ------------- - Add vyos_hostname resource module. - Rename V4-EGRESS/V6-EGRESS to EGRESS in the tests to test the same-name situation - Update vyos_facts to support IPv4 and IPv6 rule sets having the same name - Update vyos_firewall_rules to support IPv4 and IPv6 rule sets having the same name - vyos_firewall_rules - Add support for log enable on individual rules - vyos_firewall_rules - fixed incorrect option 'disabled' passed to the rules. New Modules ----------- - vyos_hostname - Manages hostname resource module v2.7.0 ====== Major Changes ------------- - Add 'pool' as value to server key in ntp_global. Minor Changes ------------- - Add vyos_snmp_server resource module. New Modules ----------- - vyos_snmp_server - Manages snmp_server resource module v2.6.0 ====== Minor Changes ------------- - Add vyos_ntp Resource Module - Adds support for specifying an `afi` for an `address_group` for `vyos.vyos.firewall_global`. As a result, `address_group` now supports IPv6. - Adds support for specifying an `afi` for an `network_group` for `vyos.vyos.firewall_global`. As a result, `network_group` now supports IPv6. Bugfixes -------- - Fix vyos_firewall_rules with state replaced to only replace the specified rules. v2.5.1 ====== Bugfixes -------- - fix issue in firewall rules facts code when IPV6 ICMP type name in vyos.vyos.vyos_firewall_rules is not idempotent v2.5.0 ====== Minor Changes ------------- - vyos_logging_global logging resource module. Deprecated Features ------------------- - The vyos_logging module has been deprecated in favor of the new vyos_logging_global resource module and will be removed in a release after "2023-08-01". Bugfixes -------- - fix issue in route-maps facts code when route-maps facts are empty. v2.4.0 ====== Minor Changes ------------- - Add vyos_prefix_lists Resource Module. New Modules ----------- - vyos_prefix_lists - Prefix-Lists resource module for VyOS v2.3.1 ====== Bugfixes -------- - Fix KeyError 'source' - vyos_firewall_rules - Updated docs resolving spelling typos - change interface to next-hop-interface while generating static_routes nexthop command. v2.3.0 ====== Minor Changes ------------- - Add vyos_route_maps resource module (https://github.com/ansible-collections/vyos.vyos/pull/156.). Bugfixes -------- - change admin_distance to distance while generating static_routes nexthop command. - firewall_global - port-groups were not added (https://github.com/ansible-collections/vyos.vyos/issues/107) New Modules ----------- - vyos_route_maps - Route Map Resource Module. v2.2.0 ====== Minor Changes ------------- - Add support for available_network_resources key, which allows to fetch the available resources for a platform (https://github.com/ansible-collections/vyos.vyos/issues/138). Security Fixes -------------- - Mask values of sensitive keys in module result. v2.1.0 ====== Minor Changes ------------- - Add regex for delete failures to terminal_stderr_re - Add vyos BGP address_family resource module (https://github.com/ansible-collections/vyos.vyos/pull/132). - Enabled addition and parsing of wireguard interface. New Modules ----------- - vyos_bgp_address_family - BGP Address Family Resource Module. v2.0.0 ====== Major Changes ------------- - Please refer to ansible.netcommon `changelog `_ for more details. - Requires ansible.netcommon v2.0.0+ to support `ansible_network_single_user_mode` and `ansible_network_import_modules` - ipaddress is no longer in ansible.netcommon. For Python versions without ipaddress (< 3.0), the ipaddress package is now required. Minor Changes ------------- - Add support for configuration caching (single_user_mode). - Add vyos BGP global resource module.(https://github.com/ansible-collections/vyos.vyos/pull/125). - Re-use device_info dictionary in cliconf. Bugfixes -------- - Update docs to clarify the idemptonecy related caveat and add it in the output warnings (https://github.com/ansible-collections/ansible.netcommon/pull/189) - cliconf plugin - Prevent `get_capabilities()` from getting larger every time it is called New Modules ----------- - vyos_bgp_global - BGP Global Resource Module. v1.1.1 ====== Bugfixes -------- - Add version key to galaxy.yaml to work around ansible-galaxy bug - Enable configuring an interface which is not present in the running config. - vyos_config - Only process src files as commands when they actually contain commands. This fixes an issue were the whitespace preceding a configuration key named 'set' was stripped, tripping up the parser. v1.1.0 ====== Minor Changes ------------- - Added ospf_interfaces resource module. New Modules ----------- - vyos_ospf_interfaces - OSPF Interfaces Resource Module. v1.0.5 ====== Bugfixes -------- - Added openvpn vtu interface support. - Update network integration auth timeout for connection local. - terminal plugin - Overhaul ansi_re to remove more escape sequences v1.0.4 ====== Minor Changes ------------- - Moved intent testcases from integration suite to unit tests. - Reformatted files with latest version of Black (20.8b1). v1.0.3 ====== v1.0.2 ====== Minor Changes ------------- - Fixed the typo in the modulename of ospfv2 and ospfv3 unit tests. - Updated docs. - terminal plugin - Added additional escape sequence to be removed from terminal output. Bugfixes -------- - Added workaround to avoid set_fact dynamically assigning value. This behavior seems to have been broken after ansible2.9. - Make `src`, `backup` and `backup_options` in vyos_config work when module alias is used (https://github.com/ansible-collections/vyos.vyos/pull/67). - vyos_config - fixed issue where config could be saved while in check mode (https://github.com/ansible-collections/vyos.vyos/pull/53) v1.0.1 ====== Minor Changes ------------- - Add doc plugin fixes (https://github.com/ansible-collections/vyos.vyos/pull/51) v1.0.0 ====== New Plugins ----------- Cliconf ~~~~~~~ - vyos - Use vyos cliconf to run command on VyOS platform New Modules ----------- - vyos_banner - Manage multiline banners on VyOS devices - vyos_command - Run one or more commands on VyOS devices - vyos_config - Manage VyOS configuration on remote device - vyos_facts - Get facts about vyos devices. - vyos_firewall_global - FIREWALL global resource module - vyos_firewall_interfaces - FIREWALL interfaces resource module - vyos_firewall_rules - FIREWALL rules resource module - vyos_interfaces - Interfaces resource module - vyos_l3_interfaces - L3 interfaces resource module - vyos_lag_interfaces - LAG interfaces resource module - vyos_lldp_global - LLDP global resource module - vyos_lldp_interfaces - LLDP interfaces resource module - vyos_logging - Manage logging on network devices - vyos_ospfv2 - OSPFv2 resource module - vyos_ospfv3 - OSPFV3 resource module - vyos_ping - Tests reachability using ping from VyOS network devices - vyos_static_routes - Static routes resource module - vyos_system - Run `set system` commands on VyOS devices - vyos_user - Manage the collection of local users on VyOS device - vyos_vlan - Manage VLANs on VyOS network devices diff --git a/changelogs/changelog.yaml b/changelogs/changelog.yaml index b20932d2..f92f47be 100644 --- a/changelogs/changelog.yaml +++ b/changelogs/changelog.yaml @@ -1,433 +1,624 @@ ancestor: null releases: 1.0.0: modules: - description: Manage multiline banners on VyOS devices name: vyos_banner namespace: "" - description: Run one or more commands on VyOS devices name: vyos_command namespace: "" - description: Manage VyOS configuration on remote device name: vyos_config namespace: "" - description: Get facts about vyos devices. name: vyos_facts namespace: "" - description: FIREWALL global resource module name: vyos_firewall_global namespace: "" - description: FIREWALL interfaces resource module name: vyos_firewall_interfaces namespace: "" - description: FIREWALL rules resource module name: vyos_firewall_rules namespace: "" - description: Interfaces resource module name: vyos_interfaces namespace: "" - description: L3 interfaces resource module name: vyos_l3_interfaces namespace: "" - description: LAG interfaces resource module name: vyos_lag_interfaces namespace: "" - description: LLDP global resource module name: vyos_lldp_global namespace: "" - description: LLDP interfaces resource module name: vyos_lldp_interfaces namespace: "" - description: Manage logging on network devices name: vyos_logging namespace: "" - description: OSPFv2 resource module name: vyos_ospfv2 namespace: "" - description: OSPFV3 resource module name: vyos_ospfv3 namespace: "" - description: Tests reachability using ping from VyOS network devices name: vyos_ping namespace: "" - description: Static routes resource module name: vyos_static_routes namespace: "" - description: Run `set system` commands on VyOS devices name: vyos_system namespace: "" - description: Manage the collection of local users on VyOS device name: vyos_user namespace: "" - description: Manage VLANs on VyOS network devices name: vyos_vlan namespace: "" plugins: cliconf: - description: Use vyos cliconf to run command on VyOS platform name: vyos namespace: null release_date: "2020-06-23" 1.0.1: changes: minor_changes: - Add doc plugin fixes (https://github.com/ansible-collections/vyos.vyos/pull/51) fragments: - 51-doc-plugin-fixes.yaml release_date: "2020-06-23" 1.0.2: changes: bugfixes: - Added workaround to avoid set_fact dynamically assigning value. This behavior seems to have been broken after ansible2.9. - Make `src`, `backup` and `backup_options` in vyos_config work when module alias is used (https://github.com/ansible-collections/vyos.vyos/pull/67). - vyos_config - fixed issue where config could be saved while in check mode (https://github.com/ansible-collections/vyos.vyos/pull/53) minor_changes: - Fixed the typo in the modulename of ospfv2 and ospfv3 unit tests. - Updated docs. - terminal plugin - Added additional escape sequence to be removed from terminal output. fragments: - 65-remove-unwanted-terminal-chars.yaml - 70-workaround-set_fact.yaml - 72-modulename-typofix.yaml - 73-update-docs.yaml - fix_src_backup_with_module_alias.yaml - prevent-vyos_config-saving-in-check-mode.yaml release_date: "2020-07-31" 1.0.3: fragments: - 1.0.3.yaml release_date: "2020-08-06" 1.0.4: changes: minor_changes: - Moved intent testcases from integration suite to unit tests. - Reformatted files with latest version of Black (20.8b1). fragments: - 71-refactor-interface-test.yaml - 80-reformat-files.yaml release_date: "2020-08-27" 1.0.5: changes: bugfixes: - Added openvpn vtu interface support. - Update network integration auth timeout for connection local. - terminal plugin - Overhaul ansi_re to remove more escape sequences fragments: - 86-openvpn_vtu_interface.yaml - local_auth_timeout.yaml - terminal-escape-codes.yaml release_date: "2020-10-08" 1.1.0: changes: minor_changes: - Added ospf_interfaces resource module. fragments: - vyos_ospf_interfaces_rm.yaml modules: - description: OSPF Interfaces Resource Module. name: vyos_ospf_interfaces namespace: "" release_date: "2020-10-30" 1.1.1: changes: bugfixes: - Add version key to galaxy.yaml to work around ansible-galaxy bug - Enable configuring an interface which is not present in the running config. - vyos_config - Only process src files as commands when they actually contain commands. This fixes an issue were the whitespace preceding a configuration key named 'set' was stripped, tripping up the parser. fragments: - 91-new-interface.yaml - config-processed-as-command.yaml - galaxy-version.yaml release_date: "2021-01-27" 2.0.0: changes: bugfixes: - Update docs to clarify the idemptonecy related caveat and add it in the output warnings (https://github.com/ansible-collections/ansible.netcommon/pull/189) - cliconf plugin - Prevent `get_capabilities()` from getting larger every time it is called major_changes: - Please refer to ansible.netcommon `changelog `_ for more details. - Requires ansible.netcommon v2.0.0+ to support `ansible_network_single_user_mode` and `ansible_network_import_modules` - ipaddress is no longer in ansible.netcommon. For Python versions without ipaddress (< 3.0), the ipaddress package is now required. minor_changes: - Add support for configuration caching (single_user_mode). - Add vyos BGP global resource module.(https://github.com/ansible-collections/vyos.vyos/pull/125). - Re-use device_info dictionary in cliconf. fragments: - 120-remove-ipaddress.yaml - 122-rpc-unbloat.yaml - bgp_global_resource_module.yaml - fix_docker_sanity_test_failures.yaml - major_release_2.0.0.yaml - modify_resource_module_class_import.yaml - single_user_mode.yaml - vyos_config_diff_doc_update.yaml modules: - description: BGP Global Resource Module. name: vyos_bgp_global namespace: "" release_date: "2021-02-24" 2.1.0: changes: minor_changes: - Add regex for delete failures to terminal_stderr_re - Add vyos BGP address_family resource module (https://github.com/ansible-collections/vyos.vyos/pull/132). - Enabled addition and parsing of wireguard interface. fragments: - 128-remove_tests_sanity_requirements.yml - 132-add-vyos-bgp-address-family.yml - parse_wireguard_interface.yml - replace-check_required.yaml - skip_no_log_sanity_error.yaml - terminal_stderr_delete.yml modules: - description: BGP Address Family Resource Module. name: vyos_bgp_address_family namespace: "" release_date: "2021-03-30" 2.2.0: changes: minor_changes: - Add support for available_network_resources key, which allows to fetch the available resources for a platform (https://github.com/ansible-collections/vyos.vyos/issues/138). security_fixes: - Mask values of sensitive keys in module result. fragments: - 147-add_ignore_txt.yml - 160_available_network_resources.yaml - no_log_mask.yaml - remove-old-test-deps.yml release_date: "2021-04-27" 2.3.0: changes: bugfixes: - change admin_distance to distance while generating static_routes nexthop command. - firewall_global - port-groups were not added (https://github.com/ansible-collections/vyos.vyos/issues/107) minor_changes: - Add vyos_route_maps resource module (https://github.com/ansible-collections/vyos.vyos/pull/156.). fragments: - changelog_doc_path_update.yaml - fix_delete_route_maps.yaml - fix_port_groups.yaml - fix_static_routes_distance.yaml - vyos-route-maps.yaml modules: - description: Route Map Resource Module. name: vyos_route_maps namespace: "" release_date: "2021-05-18" 2.3.1: changes: bugfixes: - Fix KeyError 'source' - vyos_firewall_rules - Updated docs resolving spelling typos - change interface to next-hop-interface while generating static_routes nexthop command. fragments: - 172-fix-source-keyerror-firewallrules.yml - docs_common_error_correction.yaml - fix_static_routes_next_hop_interface.yaml - update_readme_freenode_to_liberachat.yml release_date: "2021-06-22" 2.4.0: changes: minor_changes: - Add vyos_prefix_lists Resource Module. fragments: - vyos_prefix_lists.yml modules: - description: Prefix-Lists resource module for VyOS name: vyos_prefix_lists namespace: "" release_date: "2021-07-06" 2.5.0: changes: bugfixes: - fix issue in route-maps facts code when route-maps facts are empty. deprecated_features: - The vyos_logging module has been deprecated in favor of the new vyos_logging_global resource module and will be removed in a release after "2023-08-01". minor_changes: - vyos_logging_global logging resource module. fragments: - fix_issue_vyos_facts.yaml - vyos_logging_global_module.yaml release_date: "2021-07-26" 2.5.1: changes: bugfixes: - fix issue in firewall rules facts code when IPV6 ICMP type name in vyos.vyos.vyos_firewall_rules is not idempotent fragments: - doc_updated_correct_platform.yaml - fix_issue170_vyos_firewall_rules.yaml - fix_pylint_issues.yaml - tests_become.yaml release_date: "2021-08-27" 2.6.0: changes: bugfixes: - Fix vyos_firewall_rules with state replaced to only replace the specified rules. minor_changes: - Add vyos_ntp Resource Module - Adds support for specifying an `afi` for an `address_group` for `vyos.vyos.firewall_global`. As a result, `address_group` now supports IPv6. - Adds support for specifying an `afi` for an `network_group` for `vyos.vyos.firewall_global`. As a result, `network_group` now supports IPv6. fragments: - 0-copy_ignore_txt.yml - fix-firewall_rules-state-replaced.yaml - set_allow_duplicates.yaml - support_ipv6_address_and_network_groups.yaml - vyos_ntp.yml release_date: "2021-10-02" 2.7.0: changes: major_changes: - Add 'pool' as value to server key in ntp_global. minor_changes: - Add vyos_snmp_server resource module. fragments: - add_snmp_server_resource_module.yaml - ntp_server_add_pool.yaml - remove-swap-file.yml - sanity_issue_fix.yaml modules: - description: Manages snmp_server resource module name: vyos_snmp_server namespace: "" release_date: "2022-01-31" 2.8.0: changes: minor_changes: - Add vyos_hostname resource module. - Rename V4-EGRESS/V6-EGRESS to EGRESS in the tests to test the same-name situation - Update vyos_facts to support IPv4 and IPv6 rule sets having the same name - Update vyos_firewall_rules to support IPv4 and IPv6 rule sets having the same name - vyos_firewall_rules - Add support for log enable on individual rules - vyos_firewall_rules - fixed incorrect option 'disabled' passed to the rules. fragments: - rule_set_same_name.yaml - vyos_firewall_rules_add_log.yaml - vyos_firewall_rules_fix_rules_disable.yaml - vyos_hostname_rm.yaml modules: - description: Manages hostname resource module name: vyos_hostname namespace: "" release_date: "2022-03-01" 3.0.0: changes: bugfixes: - Add symlink of modules under plugins/action major_changes: - Minimum required ansible.netcommon version is 2.5.1. - Updated base plugin references to ansible.netcommon. - "`vyos_facts` - change default gather_subset to `min` from `!config` (https://github.com/ansible-collections/vyos.vyos/issues/231)." minor_changes: - Change preconfig hostname from vyos to vyosuser fragments: - add_fqcn_ansible_connection.yaml - add_symlinks_redirection.yml - change_host_name.yml - netcommon_ref_update.yaml - vyos_facts_remove_warning.yaml - vyos_facts_update.yaml release_date: "2022-04-26" 3.0.1: changes: minor_changes: - firewall_rules - icmpv6 type - add support for vyos sw >= 1.4. fragments: - firewall_rule_cli_change_version_1.4.yaml release_date: "2022-05-25" 4.0.0: changes: major_changes: - "Use of connection: local and the provider option are no longer valid on any modules in this collection." minor_changes: - Update fact gathering to support v1.3 show version output removed_features: - vyos_interface - use vyos_interfaces instead. - vyos_l3_interface - use vyos_l3_interfaces instead. - vyos_linkagg - use vyos_lag_interfaces instead. - vyos_lldp - use vyos_lldp_global instead. - vyos_lldp_interface - use vyos_lldp_interfaces instead. - vyos_static_route - use vyos_static_routes instead. fragments: - 271_equuleus_facts.yaml - 2H22-removal.yaml - fix-precommit-issues.yml - fqcn.yaml - gha.yaml - ignores-2.15.yaml - net_mods.yaml - renamed.yaml release_date: "2022-10-13" 4.0.1: changes: bugfixes: - vyos_command - Run commands at least once even when retries is set to 0 (https://github.com/ansible-collections/cisco.nxos/issues/607). fragments: - command_retries.yaml - prettier.yaml - rm_base.yaml release_date: "2023-02-27" 4.0.2: changes: bugfixes: - bgp_global - changed to use `neighbor.password` rather than `neighbor.address` (https://github.com/ansible-collections/vyos.vyos/issues/304). doc_changes: - vyos_interfaces - Updated documentation with examples and task output. fragments: - bgp-password-fix.yml - ci_codecov.yml - update_intf_doc.yaml release_date: "2023-04-03" 4.1.0: changes: bugfixes: - vyos-l3_interface_facts - fixed error when using no-default-link-local option. (https://github.com/ansible-collections/vyos.vyos/issues/295) minor_changes: - vyos-l3_interface_support - Add support for Tunnel, Bridge and Dummy interfaces. (https://github.com/ansible-collections/vyos.vyos/issues/265) fragments: - firewall.yaml - l3_interfaces-support.yaml - l3_interfaces.yaml release_date: "2023-05-30" 5.0.0: changes: major_changes: - Bumping `requires_ansible` to `>=2.15.0`, since previous ansible-core versions are EoL now. minor_changes: - All GHA workflows have been updated to use ones from ansible-content-actions. - Passes latest ansible-lint with production profile. - Removes deprecation notice for vyos.vyos. - Uncaps supported ansible-core versions, this collection now supports ansible-core>=2.15. release_summary: Starting from this release, the minimum `ansible-core` version that this collection requires is `2.15.0`. The last known version compatible with ansible-core<2.15 is v4.1.0. fragments: - avoid_unsafe_conditions.yml - integration_test_fix.yml - release_500.yaml - undeprecate.yaml release_date: "2024-06-25" + 6.0.0: + changes: + breaking_changes: + - Removed `vyos_logging`. Use `vyos_logging_global` instead. + - lldp_global - if "address" is available, merge will cause it to be added, + in contrast to the previous behavior where it was replaced. When used in replace + mode, it will remove any existing addresses and replace them with the new + one. + - vyos_bgp_address_family - Support for 1.3+ VyOS only + - vyos_bgp_global - Support for 1.3+ VyOS only + - vyos_firewall_rules - removed p2p options as they have been removed prior + to 1.3 of VyOS + - vyos_firewall_rules - tcp.flags is now a list with an inversion flag to support + 1.4+ firewall rules, but still supports 1.3- + - vyos_lldp_global - civic_address is no longer a valid key (removed prior to + 1.3) + - vyos_logging_global - For 1.4, `protocol` is an attribute of the syslog host, + not the facility + - vyos_snmp_server - no longer works with versions prior to 1.3 + - vyos_snmp_server - parameter `engine_id` is no longer a `user` or `trap_target` + parameter and is now a `snmp_v3` parameter + - vyos_snmp_server - parameters `encrypted-key` and `plaintext-key` are now + `encrypted-password` and `plaintext-password` + - vyos_user - explicit support for version 1.3+ only + - vyos_user - removed level (and its alias, role) they were removed in 1.3 + bugfixes: + - vyos_config - Fix change detection for recent Vyos versions + - vyos_firewall_global - Fix removing last member of a firewall group. + - vyos_firewall_global - Fixed ipv6 route-redirects and tests + - vyos_firewall_global - Fixed parsing of global-options (1.4+) + - vyos_firewall_global - Fixed state-policy deletion (partial and full) + - vyos_firewall_global - fixed behavior for stanzas processing by facts in 1.4+ + (e.g. present/absent stanza vs enable/disable) + - vyos_firewall_global - fixed the facts parsers to include state-policies, + redirect + - vyos_firewall_rules - Allow deleting of firewall description. + - vyos_firewall_rules - Fix limit parameter processing + - vyos_firewall_rules - fixed behavior for log, disable attributes + - vyos_firewall_rules - fixed behavior for override and replaced states + - vyos_interfaces - fixed bug where 'replace' would delete an active disable + and not reinstate it + - vyos_interfaces - fixed over-zealous handling of disable, which could catch + other interface items that are disabled. + - vyos_l3_interfaces - fix delete in interfaces to remove vif completely if + in affected interface + - vyos_l3_interfaces - fix override in interfaces to remove vif completely if + not present in new config + - vyos_l3_interfaces - fix replace in interfaces to remove vif completely if + not present in new config + - vyos_logging_global - Fixed v1.3 and before when `protocol` and `level` were + set for the same host + - vyos_ospf_interfaces - fixed get_config to cater for unordered command lists + in 1.4+ + - vyos_ospfv2 - passive-interface processing for 1.3- and 1.4+ + - vyos_ospfv3 - added support for adding interfaces to areas + - vyos_static routes - fixed the facts, argspecs, config to include interface-routes + - vyos_user - fix handling of `full-name` in parser and module + deprecated_features: + - vyos_bgp_global - no_ipv4_unicast - deprecated for use with VyOS 1.4+, use + `ipv4_unicast` instead + - vyos_firewall_interfaces - deprecated for use with VyOS 1.4+, firewalls are + no longer connected directly to interfaces. See the Firewall Configuration + documentation for how to establish a connection betwen the firewall rulesets + and the flow, interface, or zone. + - vyos_lldp_global - `address` is deprecated, use `addresses` instead. To be + removed in 7.0.0. + - vyos_logging_global - `protocol` is deprecated for 1.4 and later, use `facility` + instead. To be removed in next major version where supprot for 1.3 is removed + doc_changes: + - Update module documentation to reflect 1.4+ support + known_issues: + - existing code for 1.3 facility protocol and facility level are not compatible, + only one will be set and level is the priority. + major_changes: + - bgp modules - Added support for 1.4+ "system-as". 1.3 embedded as_number is + still supported + - vyos bgp modules - Many configuration attributes moved from `bgp_global` to + `bgp_address_family` module (see documentation). + - vyos_bgp_address_family - Aligned with version 1.3+ configuration - aggregate_address, + maximum_paths, network, and redistribute moved from `bgp_global` module. These + are now Address-family specific. Many neighbor attributes also moved from + `vyos_bgp_global` to `vyos_bgp_address_family` module. + - vyos_bgp_global - Aligned with version 1.3+ configuration - aggregate_address, + maximum_paths, network, and redistribute Removed to `bgp_address_family` module. + - vyos_user - add support for encrypted password specification + - vyos_user - add support for public-key authentication + minor_changes: + - README.md - Add Communication section with Forum information. + - vyos_bgp_address_family - Redistribute, network stanza - added support for + modifiers (metric, backdoor etc as per T6829) + - vyos_bgp_global - Added support for `solo` neighbor attribute + - vyos_config - block get_config call if match is set to "none" + - vyos_facts - added `network_os_major_version` to facts + - vyos_firewall_global - Added support for input, output, and forward chains + (1.4+) + - vyos_firewall_global - Added support for log-level in state-policy (1.4+) + - vyos_firewall_global - with 1.4+, use the the global keyword to define global + firewall rules + - vyos_firewall_interfaces - added support for VIF interfaces + - vyos_firewall_interfaces - enable support for 1.4 firewall + - vyos_firewall_interfaces - expanded firewall interface types to match existing + types + - vyos_firewall_rules - Add support for diff mode for rulesets + - vyos_firewall_rules - Added support for 1.4+ firewall rules + - vyos_firewall_rules - Fixed comparing of firewall rules + - vyos_firewall_rules - added support for 1.5+ firewall `match-ipsec-in`, `match-ipsec-out`, + `match-none-in`, `match-none-out` + - vyos_firewall_rules - added support for packet-length-exclude for 1.4+ and + the states + - vyos_l3_interfaces - make l3_interfaces pick up loopback interfaces + - vyos_lldp_global - address is now addresses, with appropriate coercion for + existing address keys + - vyos_ntp_global - Added ntp options for 1.5+ (interleave, ptp) + - vyos_ntp_global - Added support for VyOS 1.4+ (chronyd vs ntpd) + - vyos_ntp_global - Added syntax for allow_client in 1.4+ + - vyos_ospf_interaces - support for 1.4 ospf interfaces + - vyos_ospf_interfaces - add support for VyOS 1.3- virtual interfaces + - vyos_ospf_interfaces - add support for VyOS 1.4+, which moved interface configuration + from the interfaces to ospf/ospfv3 interfaces configuration + - vyos_route_maps - add support for as-path-prepend policy option + release_summary: + "This is the first significant release from the VyOS community + for these modules. + + This release is focussed on 1.3+ of VyOS and will be the last major release + to + + support 1.3 fully. Although efforts have been made to maintain compatibility + + with the existing vyos collection modules, there have breaking changes where + + necessary to configuration parameters. Please review all changes carefully + before updating. + + " + fragments: + - 0-readme.yml + - 6.0.0.yml + - T151-prepare-for-release.yaml + - T6817_T6825_ovr_rep.yml + - T6821_route_map_options.yml + - T6829-ospfv3-v1.3-area-interfacces.yml + - T6831_ospf_vif.yml + - T6833_fw_rules_limit.yaml + - T6834-static-routes-interfaces.yml + - T6891-docsite.yaml + - T6894-ntp-integration-tests.yml + - T6987-logging-changes.yml + - T6988-fix-user.yml + - T7002-firewall-global-integration-tests.yml + - T7003-firewall-interface-integration-tests.yml + - T7006-interface-integration-tests.yml + - T7008-l3-interface-integration-tests.yml + - T7010-lag-interfaces-integration-tests.yaml + - T7011-lldp-integration-tests.yaml + - T7012_ospf-integration-tests.yaml + - T7012_ospfv2_integration_tests.yaml + - T7012_ospfv3_integration_tests.yaml + - T7013_route-maps-integration-tests.yml + - T7015_static_routes_integration_tests.yaml + - T7083_firewall_rules.yml + - T7088-codecoverage.yml + - T7127-fix-interface-integration-13.yaml + - T7153-remove-logging.yaml + - T7162-interface-preflight.yaml + - T7236_firewall_rules.yml + - T7238_logging_global.yml + - T7259-get_config.yaml + - T7260-remove-last-firewall-group-member.yaml + - T7284-delete_firewall_description.yml + - T7329_snmp_server_support.yml + - T7391_domain_search.yaml + - bgp_address_family.yaml + - bgp_global.yaml + - cliconf.yml + - firewall_global_14.yml + - firewall_global_parsing.yml + - firewall_interface_types.yml + - firewall_rules.yml + - firewall_rules_diff.yml + - fix-recent-vyos-version-change-detection.yml + - integration_tests_fixes.yml + - interfaces_update.yml + - ntp_global.yaml + - pre-release6.yaml + - resource_updates.yml + - revert-409-paramiko-compatible.yaml + - snmp_server.yml + - test_module_patch.yml + - tests.yml + release_date: "2025-06-25" diff --git a/changelogs/fragments/0-readme.yml b/changelogs/fragments/0-readme.yml deleted file mode 100644 index 41a129d3..00000000 --- a/changelogs/fragments/0-readme.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - README.md - Add Communication section with Forum information. diff --git a/changelogs/fragments/6.0.0.yml b/changelogs/fragments/6.0.0.yml deleted file mode 100644 index ecd702e4..00000000 --- a/changelogs/fragments/6.0.0.yml +++ /dev/null @@ -1,6 +0,0 @@ -release_summary: | - This is the first significant release from the VyOS community for these modules. - This release is focussed on 1.3+ of VyOS and will be the last major release to - support 1.3 fully. Although efforts have been made to maintain compatibility - with the existing vyos collection modules, there have breaking changes where - necessary to configuration parameters. Please review all changes carefully before updating. diff --git a/changelogs/fragments/T151-prepare-for-release.yaml b/changelogs/fragments/T151-prepare-for-release.yaml deleted file mode 100644 index f1601d08..00000000 --- a/changelogs/fragments/T151-prepare-for-release.yaml +++ /dev/null @@ -1,3 +0,0 @@ -trivial: - - update galaxy.yml for release version 6.0.0 - - update fragments to include modules, re-align with requirements diff --git a/changelogs/fragments/T6817_T6825_ovr_rep.yml b/changelogs/fragments/T6817_T6825_ovr_rep.yml deleted file mode 100644 index 17af8a44..00000000 --- a/changelogs/fragments/T6817_T6825_ovr_rep.yml +++ /dev/null @@ -1,8 +0,0 @@ ---- -minor_changes: - - vyos_firewall_rules - added support for packet-length-exclude for 1.4+ and the states -bugfixes: - - vyos_firewall_rules - fixed behavior for override and replaced states - - vyos_firewall_rules - fixed behavior for log, disable attributes -trivial: - - vyos_firewall_rules - added a separate test suite test_vyos_firewall_rules14.py diff --git a/changelogs/fragments/T6821_route_map_options.yml b/changelogs/fragments/T6821_route_map_options.yml deleted file mode 100644 index 6d1e974b..00000000 --- a/changelogs/fragments/T6821_route_map_options.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_route_maps - add support for as-path-prepend policy option diff --git a/changelogs/fragments/T6829-ospfv3-v1.3-area-interfacces.yml b/changelogs/fragments/T6829-ospfv3-v1.3-area-interfacces.yml deleted file mode 100644 index 7a969007..00000000 --- a/changelogs/fragments/T6829-ospfv3-v1.3-area-interfacces.yml +++ /dev/null @@ -1,6 +0,0 @@ ---- -bugfixes: - - vyos_ospfv3 - added support for adding interfaces to areas -trivial: - - vyos_ospfv3 - updated unit test suites to include area interfaces - - vyos_ospfv3 - added v1.4 unit test diff --git a/changelogs/fragments/T6831_ospf_vif.yml b/changelogs/fragments/T6831_ospf_vif.yml deleted file mode 100644 index 97a4c7c8..00000000 --- a/changelogs/fragments/T6831_ospf_vif.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_ospf_interfaces - add support for VyOS 1.3- virtual interfaces diff --git a/changelogs/fragments/T6833_fw_rules_limit.yaml b/changelogs/fragments/T6833_fw_rules_limit.yaml deleted file mode 100644 index 3e6f7beb..00000000 --- a/changelogs/fragments/T6833_fw_rules_limit.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -bugfixes: - - vyos_firewall_rules - Fix limit parameter processing diff --git a/changelogs/fragments/T6834-static-routes-interfaces.yml b/changelogs/fragments/T6834-static-routes-interfaces.yml deleted file mode 100644 index e827f598..00000000 --- a/changelogs/fragments/T6834-static-routes-interfaces.yml +++ /dev/null @@ -1,5 +0,0 @@ ---- -bugfixes: - - vyos_static routes - fixed the facts, argspecs, config to include interface-routes -trivial: - - vyos_static routes - updated unit test suites to include interface-routes diff --git a/changelogs/fragments/T6891-docsite.yaml b/changelogs/fragments/T6891-docsite.yaml deleted file mode 100644 index 7667ac7b..00000000 --- a/changelogs/fragments/T6891-docsite.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - move docsite VyOS platform docs internal diff --git a/changelogs/fragments/T6894-ntp-integration-tests.yml b/changelogs/fragments/T6894-ntp-integration-tests.yml deleted file mode 100644 index 5096866c..00000000 --- a/changelogs/fragments/T6894-ntp-integration-tests.yml +++ /dev/null @@ -1,6 +0,0 @@ ---- -minor_changes: - - vyos_ntp_global - Added ntp options for 1.5+ (interleave, ptp) -trivial: - - vyos_ntp_global - Synchronized argspec and docs with core module - - vyos_ntp_global - Fix integration tests for 1.3+ diff --git a/changelogs/fragments/T6987-logging-changes.yml b/changelogs/fragments/T6987-logging-changes.yml deleted file mode 100644 index 89f50337..00000000 --- a/changelogs/fragments/T6987-logging-changes.yml +++ /dev/null @@ -1,19 +0,0 @@ ---- -breaking_changes: - - vyos_logging_global - For 1.4, `protocol` is an attribute of the syslog host, not the facility - -bugfixes: - - vyos_logging_global - Fixed v1.3 and before when `protocol` and `level` were set for the same host - -deprecated_features: - - vyos_logging_global - `protocol` is deprecated for 1.4 and later, use `facility` instead. To be removed - in next major version where supprot for 1.3 is removed - -known_issues: - - existing code for 1.3 facility protocol and facility level are not compatible, - only one will be set and level is the priority. - -trivial: - - vyos_logging_global - Fixed integration test for `vyos_facts` which was brittle due to line dependencies in checks - - vyos_logging_global - Fixed integration test for `vyos_config` due to bad commands. 1.3 frequently won't finish due - to timeouts or system failures during the tests, but 1.4 and 1.5 diff --git a/changelogs/fragments/T6988-fix-user.yml b/changelogs/fragments/T6988-fix-user.yml deleted file mode 100644 index 05966e62..00000000 --- a/changelogs/fragments/T6988-fix-user.yml +++ /dev/null @@ -1,15 +0,0 @@ ---- -breaking_changes: - - vyos_user - removed level (and its alias, role) they were removed in 1.3 - - vyos_user - explicit support for version 1.3+ only - -major_changes: - - vyos_user - add support for public-key authentication - - vyos_user - add support for encrypted password specification - -bugfixes: - - vyos_user - fix handling of `full-name` in parser and module - -trivial: - - vyos_user - fix parsing of `full-name` to ignore quotes - - vyos_user - fix integration tests for smoke diff --git a/changelogs/fragments/T7002-firewall-global-integration-tests.yml b/changelogs/fragments/T7002-firewall-global-integration-tests.yml deleted file mode 100644 index c94a76fc..00000000 --- a/changelogs/fragments/T7002-firewall-global-integration-tests.yml +++ /dev/null @@ -1,8 +0,0 @@ ---- -bugfixes: - - vyos_firewall_global - fixed the facts parsers to include state-policies, redirect - - vyos_firewall_global - fixed behavior for stanzas processing by facts in 1.4+ (e.g. present/absent stanza vs enable/disable) -trivial: - - vyos_firewall_global - updated unit test suites to include units for 1.4+ and missing attributes (e.g. log) - - vyos_firewall_global - re-factored integration test suite structure to D.R.Y and add support for 1.4+ - - vyos_firewall_global - cleared-up the obsolete stanzas (e.g. config-trap) diff --git a/changelogs/fragments/T7003-firewall-interface-integration-tests.yml b/changelogs/fragments/T7003-firewall-interface-integration-tests.yml deleted file mode 100644 index 03541174..00000000 --- a/changelogs/fragments/T7003-firewall-interface-integration-tests.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - fix integration tests for `firewall_interfaces` for v1.3- diff --git a/changelogs/fragments/T7006-interface-integration-tests.yml b/changelogs/fragments/T7006-interface-integration-tests.yml deleted file mode 100644 index 61c4e70a..00000000 --- a/changelogs/fragments/T7006-interface-integration-tests.yml +++ /dev/null @@ -1,5 +0,0 @@ ---- -trivial: - - vyos interfaces tests - adjust for loopback being removed in `vyos_l3_interfaces` - - vyos interfaces tests - fixed `vyos_interfaces` for 1.5+ - - actions - update codecov updloader to version 5 diff --git a/changelogs/fragments/T7008-l3-interface-integration-tests.yml b/changelogs/fragments/T7008-l3-interface-integration-tests.yml deleted file mode 100644 index 36b377b3..00000000 --- a/changelogs/fragments/T7008-l3-interface-integration-tests.yml +++ /dev/null @@ -1,10 +0,0 @@ ---- -bugfixes: - - vyos_l3_interfaces - fix replace in interfaces to remove vif completely if not present in new config - - vyos_l3_interfaces - fix override in interfaces to remove vif completely if not present in new config - - vyos_l3_interfaces - fix delete in interfaces to remove vif completely if in affected interface - -trivial: - - vyos_l3_interfaces - fix integration tests for `l3_interfaces` - - vyos_l3_interfaces - fix integration tests for `interfaces` - - vyos_l3_interfaces - added unit test for unknown interface type diff --git a/changelogs/fragments/T7010-lag-interfaces-integration-tests.yaml b/changelogs/fragments/T7010-lag-interfaces-integration-tests.yaml deleted file mode 100644 index 23b918f4..00000000 --- a/changelogs/fragments/T7010-lag-interfaces-integration-tests.yaml +++ /dev/null @@ -1,4 +0,0 @@ ---- -trivial: - - vyos_lag_interfaces - fix integration tests for `lag_interfaces` - - vyos_lag_interfaces - add unit tests for `lag_interfaces` diff --git a/changelogs/fragments/T7011-lldp-integration-tests.yaml b/changelogs/fragments/T7011-lldp-integration-tests.yaml deleted file mode 100644 index 60601681..00000000 --- a/changelogs/fragments/T7011-lldp-integration-tests.yaml +++ /dev/null @@ -1,11 +0,0 @@ ---- -breaking_changes: - - lldp_global - if "address" is available, merge will cause it to be added, in contrast to - the previous behavior where it was replaced. When used in replace mode, it - will remove any existing addresses and replace them with the new one. - - vyos_lldp_global - civic_address is no longer a valid key (removed prior to 1.3) - -deprecated_features: - - vyos_lldp_global - `address` is deprecated, use `addresses` instead. To be removed in 7.0.0. -minor_changes: - - vyos_lldp_global - address is now addresses, with appropriate coercion for existing address keys diff --git a/changelogs/fragments/T7012_ospf-integration-tests.yaml b/changelogs/fragments/T7012_ospf-integration-tests.yaml deleted file mode 100644 index b696b2aa..00000000 --- a/changelogs/fragments/T7012_ospf-integration-tests.yaml +++ /dev/null @@ -1,9 +0,0 @@ ---- -minor_changes: - - vyos_ospf_interfaces - add support for VyOS 1.4+, which moved interface configuration from the interfaces to ospf/ospfv3 interfaces configuration -bugfixes: - - vyos_ospf_interfaces - fixed get_config to cater for unordered command lists in 1.4+ -trivial: - - vyos_ospf_interfaces - re-worked intergration test suite structure to D.R.Y. - - vyos_ospf_interfaces - added support for 1.4+ VyOS - - vyos_ospf_interfaces - updated unit test suite to cater for 1.4+ bugfixes diff --git a/changelogs/fragments/T7012_ospfv2_integration_tests.yaml b/changelogs/fragments/T7012_ospfv2_integration_tests.yaml deleted file mode 100644 index b1382697..00000000 --- a/changelogs/fragments/T7012_ospfv2_integration_tests.yaml +++ /dev/null @@ -1,6 +0,0 @@ ---- -trivial: - - vyos_ospfv2 - fix intergration test suite. - - vyos_ospfv2 - fix unit tests. -bugfixes: - - vyos_ospfv2 - passive-interface processing for 1.3- and 1.4+ diff --git a/changelogs/fragments/T7012_ospfv3_integration_tests.yaml b/changelogs/fragments/T7012_ospfv3_integration_tests.yaml deleted file mode 100644 index b8f1f8b3..00000000 --- a/changelogs/fragments/T7012_ospfv3_integration_tests.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - vyos_ospfv2 - fix intergration test suite. diff --git a/changelogs/fragments/T7013_route-maps-integration-tests.yml b/changelogs/fragments/T7013_route-maps-integration-tests.yml deleted file mode 100644 index 1290bbf5..00000000 --- a/changelogs/fragments/T7013_route-maps-integration-tests.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - vyos_route_maps - Refactor the integration tests structure and support for 1.4+ versions diff --git a/changelogs/fragments/T7015_static_routes_integration_tests.yaml b/changelogs/fragments/T7015_static_routes_integration_tests.yaml deleted file mode 100644 index 2328784f..00000000 --- a/changelogs/fragments/T7015_static_routes_integration_tests.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - vyos_static_routes - Fixed for v1.3- and 1.4+ diff --git a/changelogs/fragments/T7083_firewall_rules.yml b/changelogs/fragments/T7083_firewall_rules.yml deleted file mode 100644 index bc2c5ca4..00000000 --- a/changelogs/fragments/T7083_firewall_rules.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -breaking_changes: - - vyos_firewall_rules - removed p2p options as they have been removed prior to 1.3 of VyOS diff --git a/changelogs/fragments/T7088-codecoverage.yml b/changelogs/fragments/T7088-codecoverage.yml deleted file mode 100644 index 6925c85f..00000000 --- a/changelogs/fragments/T7088-codecoverage.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - use our own code coverage diff --git a/changelogs/fragments/T7127-fix-interface-integration-13.yaml b/changelogs/fragments/T7127-fix-interface-integration-13.yaml deleted file mode 100644 index 9623fab6..00000000 --- a/changelogs/fragments/T7127-fix-interface-integration-13.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - vyos_interfaces - fix bug in RTT tests on 1.3 due to handling of MTUs diff --git a/changelogs/fragments/T7153-remove-logging.yaml b/changelogs/fragments/T7153-remove-logging.yaml deleted file mode 100644 index 92f5b099..00000000 --- a/changelogs/fragments/T7153-remove-logging.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -breaking_changes: - - Removed `vyos_logging`. Use `vyos_logging_global` instead. diff --git a/changelogs/fragments/T7162-interface-preflight.yaml b/changelogs/fragments/T7162-interface-preflight.yaml deleted file mode 100644 index c829ca8b..00000000 --- a/changelogs/fragments/T7162-interface-preflight.yaml +++ /dev/null @@ -1,5 +0,0 @@ ---- -trivial: - - fix pre-flight sets for interfaces - - restore previously-removed interface test duplex and speed - - remove unnecessary debug statements in integration tests diff --git a/changelogs/fragments/T7236_firewall_rules.yml b/changelogs/fragments/T7236_firewall_rules.yml deleted file mode 100644 index bad04832..00000000 --- a/changelogs/fragments/T7236_firewall_rules.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_firewall_rules - Fixed comparing of firewall rules diff --git a/changelogs/fragments/T7238_logging_global.yml b/changelogs/fragments/T7238_logging_global.yml deleted file mode 100644 index 2be46968..00000000 --- a/changelogs/fragments/T7238_logging_global.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - vyos_logging_global - fix get_version in integration tests diff --git a/changelogs/fragments/T7259-get_config.yaml b/changelogs/fragments/T7259-get_config.yaml deleted file mode 100644 index 84bb1ab4..00000000 --- a/changelogs/fragments/T7259-get_config.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_config - block get_config call if match is set to "none" diff --git a/changelogs/fragments/T7260-remove-last-firewall-group-member.yaml b/changelogs/fragments/T7260-remove-last-firewall-group-member.yaml deleted file mode 100644 index 78e07356..00000000 --- a/changelogs/fragments/T7260-remove-last-firewall-group-member.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -bugfixes: - - vyos_firewall_global - Fix removing last member of a firewall group. diff --git a/changelogs/fragments/T7284-delete_firewall_description.yml b/changelogs/fragments/T7284-delete_firewall_description.yml deleted file mode 100644 index fe2b1882..00000000 --- a/changelogs/fragments/T7284-delete_firewall_description.yml +++ /dev/null @@ -1,2 +0,0 @@ -bugfixes: - - vyos_firewall_rules - Allow deleting of firewall description. diff --git a/changelogs/fragments/T7329_snmp_server_support.yml b/changelogs/fragments/T7329_snmp_server_support.yml deleted file mode 100644 index 6d661240..00000000 --- a/changelogs/fragments/T7329_snmp_server_support.yml +++ /dev/null @@ -1,4 +0,0 @@ ---- -trivial: - - prepare_vyos_tests - fix dependency script for intergration tests to run on e1000e vNiC - - vyos_snmp_server - add SNMPv3 engine ID to vars and merged.yaml and rendered.yaml to meet 1.4.x and 1.5.x requirements diff --git a/changelogs/fragments/T7391_domain_search.yaml b/changelogs/fragments/T7391_domain_search.yaml deleted file mode 100644 index 17f2c4be..00000000 --- a/changelogs/fragments/T7391_domain_search.yaml +++ /dev/null @@ -1,4 +0,0 @@ ---- -trivial: - - vyos_system - Added support for domain_search for 1.4+ - - test_vyos_system - Added test for domain_search diff --git a/changelogs/fragments/bgp_address_family.yaml b/changelogs/fragments/bgp_address_family.yaml deleted file mode 100644 index 606bc4bc..00000000 --- a/changelogs/fragments/bgp_address_family.yaml +++ /dev/null @@ -1,15 +0,0 @@ ---- -major_changes: - - vyos_bgp_address_family - Aligned with version 1.3+ configuration - aggregate_address, maximum_paths, network, and redistribute - moved from `bgp_global` module. These are now Address-family specific. Many neighbor attributes also moved from `vyos_bgp_global` - to `vyos_bgp_address_family` module. - - bgp modules - Added support for 1.4+ "system-as". 1.3 embedded as_number is still supported -breaking_changes: - - vyos_bgp_address_family - Support for 1.3+ VyOS only - -minor_changes: - - vyos_bgp_address_family - Redistribute, network stanza - added support for modifiers (metric, backdoor etc as per T6829) - -trivial: - - vyos_bgp_address_family - Fixed tests for 1.4+ bgp_address_family - - vyos_bgp_address_family - updated documentation diff --git a/changelogs/fragments/bgp_global.yaml b/changelogs/fragments/bgp_global.yaml deleted file mode 100644 index 1a1ab310..00000000 --- a/changelogs/fragments/bgp_global.yaml +++ /dev/null @@ -1,16 +0,0 @@ ---- -major_changes: - - vyos bgp modules - Many configuration attributes moved from `bgp_global` to `bgp_address_family` module (see documentation). - - vyos_bgp_global - Aligned with version 1.3+ configuration - aggregate_address, maximum_paths, network, and redistribute - Removed to `bgp_address_family` module. -minor_changes: - - vyos_bgp_global - Added support for `solo` neighbor attribute -breaking_changes: - - vyos_bgp_global - Support for 1.3+ VyOS only - -deprecated_features: - - vyos_bgp_global - no_ipv4_unicast - deprecated for use with VyOS 1.4+, use `ipv4_unicast` instead - -trivial: - - vyos_bgp_global - Fixed tests for 1.4+ bgp_global - - vyos_bgp_global - updated documentation diff --git a/changelogs/fragments/cliconf.yml b/changelogs/fragments/cliconf.yml deleted file mode 100644 index 69e105bc..00000000 --- a/changelogs/fragments/cliconf.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_facts - added `network_os_major_version` to facts diff --git a/changelogs/fragments/firewall_global_14.yml b/changelogs/fragments/firewall_global_14.yml deleted file mode 100644 index 4b993ab5..00000000 --- a/changelogs/fragments/firewall_global_14.yml +++ /dev/null @@ -1,8 +0,0 @@ ---- -minor_changes: - - vyos_firewall_global - with 1.4+, use the the global keyword to define global firewall rules - - vyos_firewall_global - Added support for input, output, and forward chains (1.4+) - - vyos_firewall_global - Added support for log-level in state-policy (1.4+) -bugfixes: - - vyos_firewall_global - Fixed ipv6 route-redirects and tests - - vyos_firewall_global - Fixed state-policy deletion (partial and full) diff --git a/changelogs/fragments/firewall_global_parsing.yml b/changelogs/fragments/firewall_global_parsing.yml deleted file mode 100644 index 98275fff..00000000 --- a/changelogs/fragments/firewall_global_parsing.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -bugfixes: - - vyos_firewall_global - Fixed parsing of global-options (1.4+) diff --git a/changelogs/fragments/firewall_interface_types.yml b/changelogs/fragments/firewall_interface_types.yml deleted file mode 100644 index 8fc8eb47..00000000 --- a/changelogs/fragments/firewall_interface_types.yml +++ /dev/null @@ -1,9 +0,0 @@ ---- -minor_changes: - - vyos_firewall_interfaces - added support for VIF interfaces - - vyos_firewall_interfaces - expanded firewall interface types to match existing types - -deprecated_features: - - vyos_firewall_interfaces - deprecated for use with VyOS 1.4+, firewalls are no longer - connected directly to interfaces. See the Firewall Configuration documentation - for how to establish a connection betwen the firewall rulesets and the flow, interface, or zone. diff --git a/changelogs/fragments/firewall_rules.yml b/changelogs/fragments/firewall_rules.yml deleted file mode 100644 index 495da458..00000000 --- a/changelogs/fragments/firewall_rules.yml +++ /dev/null @@ -1,10 +0,0 @@ ---- -breaking_changes: - - vyos_firewall_rules - tcp.flags is now a list with an inversion flag to support 1.4+ firewall rules, but still supports 1.3- - -minor_changes: - - vyos_firewall_rules - Added support for 1.4+ firewall rules - - vyos_firewall_rules - added support for 1.5+ firewall `match-ipsec-in`, `match-ipsec-out`, `match-none-in`, `match-none-out` - -trivial: - - vyos_firewall_rules - fix tests for 1.4+ firewall rules (ICMP V6 code and type) diff --git a/changelogs/fragments/firewall_rules_diff.yml b/changelogs/fragments/firewall_rules_diff.yml deleted file mode 100644 index 9e62a515..00000000 --- a/changelogs/fragments/firewall_rules_diff.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -minor_changes: - - vyos_firewall_rules - Add support for diff mode for rulesets diff --git a/changelogs/fragments/fix-recent-vyos-version-change-detection.yml b/changelogs/fragments/fix-recent-vyos-version-change-detection.yml deleted file mode 100644 index 2e506259..00000000 --- a/changelogs/fragments/fix-recent-vyos-version-change-detection.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -bugfixes: - - vyos_config - Fix change detection for recent Vyos versions diff --git a/changelogs/fragments/integration_tests_fixes.yml b/changelogs/fragments/integration_tests_fixes.yml deleted file mode 100644 index 5bb898d8..00000000 --- a/changelogs/fragments/integration_tests_fixes.yml +++ /dev/null @@ -1,4 +0,0 @@ ---- -trivial: - - prepare_vyos_firewall - Remove IP address from eth1 for lag tests - - vyos_snmp_server - add IP address for 1.4+ OS variants diff --git a/changelogs/fragments/interfaces_update.yml b/changelogs/fragments/interfaces_update.yml deleted file mode 100644 index 5702b7a4..00000000 --- a/changelogs/fragments/interfaces_update.yml +++ /dev/null @@ -1,12 +0,0 @@ ---- -minor_changes: - - vyos_l3_interfaces - make l3_interfaces pick up loopback interfaces - - vyos_firewall_interfaces - enable support for 1.4 firewall - - vyos_ospf_interaces - support for 1.4 ospf interfaces -bugfixes: - - vyos_interfaces - fixed bug where 'replace' would delete an active disable and not reinstate it - - vyos_interfaces - fixed over-zealous handling of disable, which could catch other interface - items that are disabled. - -trivial: - - vyos interface plugins - added tests for verifying imterface disable/enable diff --git a/changelogs/fragments/ntp_global.yaml b/changelogs/fragments/ntp_global.yaml deleted file mode 100644 index b3177efb..00000000 --- a/changelogs/fragments/ntp_global.yaml +++ /dev/null @@ -1,6 +0,0 @@ ---- -minor_changes: - - vyos_ntp_global - Added support for VyOS 1.4+ (chronyd vs ntpd) - - vyos_ntp_global - Added syntax for allow_client in 1.4+ -trivial: - - vyos_ntp_global - Added test suite for ntp_global and 1.4+ diff --git a/changelogs/fragments/resource_updates.yml b/changelogs/fragments/resource_updates.yml deleted file mode 100644 index 5a0c5e0e..00000000 --- a/changelogs/fragments/resource_updates.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - updated resources and re-ran resource templates for existing older template code diff --git a/changelogs/fragments/revert-409-paramiko-compatible.yaml b/changelogs/fragments/revert-409-paramiko-compatible.yaml deleted file mode 100644 index 658c6166..00000000 --- a/changelogs/fragments/revert-409-paramiko-compatible.yaml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - changelog to enable the branch restore diff --git a/changelogs/fragments/snmp_server.yml b/changelogs/fragments/snmp_server.yml deleted file mode 100644 index 5794c350..00000000 --- a/changelogs/fragments/snmp_server.yml +++ /dev/null @@ -1,11 +0,0 @@ ---- -breaking_changes: - - vyos_snmp_server - parameter `engine_id` is no longer a `user` or `trap_target` parameter and is now a `snmp_v3` parameter - - vyos_snmp_server - parameters `encrypted-key` and `plaintext-key` are now `encrypted-password` and `plaintext-password` - - vyos_snmp_server - no longer works with versions prior to 1.3 - -trivial: - - vyos_snmp_server - 192.0.2.1/24 (TEST-NET-1) is used on eth1 for testing to accomodate services that check - valid configurations (such as SNMP) - - vyos_snmp_server - use encrypted passwords for SNMPv3 tests as VyOS now converts those "when next reloaded" - - vyos_snmp_server - fixed integration tests for 1.3+ for `vyos_hostname` diff --git a/changelogs/fragments/test_module_patch.yml b/changelogs/fragments/test_module_patch.yml deleted file mode 100644 index 557a941a..00000000 --- a/changelogs/fragments/test_module_patch.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - util.py - Add mock _ANSIBLE_PROFILE to reflect changes to Ansible libs diff --git a/changelogs/fragments/tests.yml b/changelogs/fragments/tests.yml deleted file mode 100644 index 78e3d597..00000000 --- a/changelogs/fragments/tests.yml +++ /dev/null @@ -1,3 +0,0 @@ ---- -trivial: - - ignore 2.19 sanity tests for now diff --git a/docs/vyos.vyos.vyos_banner_module.rst b/docs/vyos.vyos.vyos_banner_module.rst index 4a847f77..0223d5b0 100644 --- a/docs/vyos.vyos.vyos_banner_module.rst +++ b/docs/vyos.vyos.vyos_banner_module.rst @@ -1,164 +1,164 @@ .. _vyos.vyos.vyos_banner_module: ********************* vyos.vyos.vyos_banner ********************* **Manage multiline banners on VyOS devices** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This will configure both pre-login and post-login banners on remote devices running VyOS. It allows playbooks to add or remote banner text from the active running configuration. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
banner
string / required
    Choices:
  • pre-login
  • post-login
Specifies which banner that should be configured on the remote device.
state
string
    Choices:
  • present ←
  • absent
Specifies whether or not the configuration is present in the current devices active running configuration.
text
string
The banner text that should be present in the remote device running configuration. This argument accepts a multiline string, with no empty lines. Requires state=present.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: configure the pre-login banner vyos.vyos.vyos_banner: banner: pre-login text: | this is my pre-login banner that contains a multiline string state: present - name: remove the post-login banner vyos.vyos.vyos_banner: banner: post-login state: absent Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['banner pre-login', 'this is my pre-login banner', 'that contains a multiline', 'string']


Status ------ Authors ~~~~~~~ - Trishna Guha (@trishnaguha) diff --git a/docs/vyos.vyos.vyos_bgp_address_family_module.rst b/docs/vyos.vyos.vyos_bgp_address_family_module.rst index e17dfdd7..b82d29cf 100644 --- a/docs/vyos.vyos.vyos_bgp_address_family_module.rst +++ b/docs/vyos.vyos.vyos_bgp_address_family_module.rst @@ -1,2203 +1,2212 @@ .. _vyos.vyos.vyos_bgp_address_family_module: ********************************* vyos.vyos.vyos_bgp_address_family ********************************* **BGP Address Family resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages BGP address family configuration of interfaces on devices running VYOS. -- Tested against VYOS 1.3, 1.4 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 +- The provided examples of commands are valid for VyOS 1.4+ Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A dict of BGP global configuration for interfaces.
address_family
list / elements=dictionary
BGP address-family parameters.
afi
string
    Choices:
  • ipv4
  • ipv6
BGP address family settings.
aggregate_address
list / elements=dictionary
BGP aggregate network.
as_set
boolean
    Choices:
  • no
  • yes
Generate AS-set path information for this aggregate address.
prefix
string
BGP aggregate network.
summary_only
boolean
    Choices:
  • no
  • yes
Announce the aggregate summary network only.
networks
list / elements=dictionary
BGP network
backdoor
boolean
    Choices:
  • no
  • yes
Network as a backdoor route.
path_limit
integer
AS path hop count limit
prefix
string
BGP network address
route_map
string
Route-map to modify route attributes
redistribute
list / elements=dictionary
Redistribute routes from other protocols into BGP
metric
integer
Metric for redistributed routes.
protocol
string
    Choices:
  • connected
  • kernel
  • ospf
  • ospfv3
  • rip
  • ripng
  • static
types of routes to be redistributed.
route_map
string
Route map to filter redistributed routes
table
string
Redistribute non-main Kernel Routing Table.
as_number
integer
AS number
neighbors
list / elements=dictionary
BGP neighbor
address_family
list / elements=dictionary
address family.
afi
string
    Choices:
  • ipv4
  • ipv6
BGP neighbor parameters.
allowas_in
integer
Number of occurrences of AS number.
as_override
boolean
    Choices:
  • no
  • yes
AS for routes sent to this neighbor to be the local AS.
attribute_unchanged
dictionary
BGP attributes are sent unchanged.
as_path
boolean
    Choices:
  • no
  • yes
as_path attribute
med
boolean
    Choices:
  • no
  • yes
med attribute
next_hop
boolean
    Choices:
  • no
  • yes
next_hop attribute
capability
dictionary
Advertise capabilities to this neighbor.
dynamic
boolean
    Choices:
  • no
  • yes
Advertise dynamic capability to this neighbor.
orf
string
    Choices:
  • send
  • receive
Advertise ORF capability to this neighbor.
default_originate
string
Send default route to this neighbor
distribute_list
list / elements=dictionary
Access-list to filter route updates to/from this neighbor.
acl
integer
Access-list number.
action
string
    Choices:
  • export
  • import
Access-list to filter outgoing/incoming route updates to this neighbor
filter_list
list / elements=dictionary
As-path-list to filter route updates to/from this neighbor.
action
string
    Choices:
  • export
  • import
filter outgoing/incoming route updates
path_list
string
As-path-list to filter
maximum_prefix
integer
Maximum number of prefixes to accept from this neighbor nexthop-self Nexthop for routes sent to this neighbor to be the local router.
nexthop_local
boolean
    Choices:
  • no
  • yes
Nexthop attributes.
nexthop_self
boolean
    Choices:
  • no
  • yes
Nexthop for routes sent to this neighbor to be the local router.
peer_group
string
IPv4 peer group for this peer
prefix_list
list / elements=dictionary
Prefix-list to filter route updates to/from this neighbor.
action
string
    Choices:
  • export
  • import
filter outgoing/incoming route updates
prefix_list
string
Prefix-list to filter
remove_private_as
boolean
    Choices:
  • no
  • yes
Remove private AS numbers from AS path in outbound route updates
route_map
list / elements=dictionary
Route-map to filter route updates to/from this neighbor.
action
string
    Choices:
  • export
  • import
filter outgoing/incoming route updates
route_map
string
route-map to filter
route_reflector_client
boolean
    Choices:
  • no
  • yes
Neighbor as a route reflector client
route_server_client
boolean
    Choices:
  • no
  • yes
Neighbor is route server client
soft_reconfiguration
boolean
    Choices:
  • no
  • yes
Soft reconfiguration for neighbor
unsupress_map
string
Route-map to selectively unsuppress suppressed routes
weight
integer
Default weight for routes from this neighbor
neighbor_address
string
BGP neighbor address (v4/v6).
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration command | match bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • gathered
  • parsed
  • rendered
  • purged
  • overridden
The state the configuration should be left in.

Examples -------- .. code-block:: yaml # Using merged # Before state # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ - name: Merge provided configuration with device configuration vyos.vyos.vyos_bgp_address_family: config: as_number: "100" address_family: - afi: "ipv4" redistribute: - protocol: "static" metric: 50 neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" maximum_prefix: 45 nexthop_self: true route_map: - action: "export" route_map: "map01" - action: "import" route_map: "map01" weight: 50 # After State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' # vyos@vyos:~$ # # Module Execution: # # "after": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": {}, # "changed": true, # "commands": [ - # "set protocols bgp 100 address-family ipv4-unicast redistribute static metric 50", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight 50" + # "set protocols bgp address-family ipv4-unicast redistribute static metric 50", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight 50" # ], # # Using replaced: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' # vyos@vyos:~$ - name: Replace provided configuration with device configuration vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv6" maximum_prefix: 45 nexthop_self: true state: replaced # After State: # # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' # vyos@vyos:~$ # # # # Module Execution: # "after": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list", - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate", - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged", - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number 4", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map map01", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export 10", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix 45", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self" + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list", + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate", + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged", + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number 4", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map map01", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export 10", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix 45", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self" # ], # Using overridden # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast network 35.1.1.0/24 backdoor - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only - # set protocols bgp 100 address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast network 35.1.1.0/24 backdoor + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only + # set protocols bgp address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' # vyos@vyos:~$ - name: Override vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "100.11.34.12" address_family: - afi: "ipv6" maximum_prefix: 45 nexthop_self: true route_map: - action: "import" route_map: "map01" address_family: - afi: "ipv4" aggregate_address: - prefix: "60.9.2.0/24" summary_only: true - afi: "ipv6" redistribute: - protocol: "static" metric: 50 state: overridden # After State # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only - # set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only + # set protocols bgp address-family ipv6-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' # vyos@vyos:~$ # Module Execution: # "after": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "prefix": "60.9.2.0/24", # "summary_only": true # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "import", # "route_map": "map01" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "networks": [ # { # "backdoor": true, # "prefix": "35.1.1.0/24" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "aggregate_address": [ # { # "prefix": "6601:1:1:1::/64", # "summary_only": true # } # ], # "networks": [ # { # "prefix": "5001:1:1:1::/64", # "route_map": "map01" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in", - # "delete protocols bgp 100 address-family ipv6 aggregate-address", - # "delete protocols bgp 100 address-family ipv6 network", - # "delete protocols bgp 100 address-family ipv4 network", - # "delete protocols bgp 100 address-family ipv4 redistribute", - # "set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only", - # "set protocols bgp 100 address-family ipv6-unicast redistribute static metric 50", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix 45", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import map01" + # "delete protocols bgp neighbor 20.33.1.1/24 address-family", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override", + # "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in", + # "delete protocols bgp address-family ipv6 aggregate-address", + # "delete protocols bgp address-family ipv6 network", + # "delete protocols bgp address-family ipv4 network", + # "delete protocols bgp address-family ipv4 redistribute", + # "set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only", + # "set protocols bgp address-family ipv6-unicast redistribute static metric 50", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix 45", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import map01" # ], # # Using deleted: # Before State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self - # set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp address-family ipv6-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' + # set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self + # set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' # vyos@vyos:~$ - name: Delete vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv6" - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" state: deleted # After State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 100.11.34.12 + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv6-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 100.11.34.12 # vyos@vyos:~$ # # # Module Execution: # # "after": { # "address_family": [ # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "prefix": "60.9.2.0/24", # "summary_only": true # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "import", # "route_map": "map01" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ - # "delete protocols bgp 100 address-family ipv4-unicast", - # "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast", - # "delete protocols bgp 100 neighbor 100.11.34.12 address-family" + # "delete protocols bgp address-family ipv4-unicast", + # "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast", + # "delete protocols bgp neighbor 100.11.34.12 address-family" # ], # # using parsed: # parsed.cfg # set protocols bgp 65536 address-family ipv4-unicast aggregate-address 192.0.2.0/24 as-set # set protocols bgp 65536 address-family ipv4-unicast network 192.1.13.0/24 route-map 'map01' # set protocols bgp 65536 address-family ipv4-unicast network 192.2.13.0/24 backdoor # set protocols bgp 65536 address-family ipv6-unicast redistribute ripng metric '20' # set protocols bgp 65536 neighbor 192.0.2.25 address-family ipv4-unicast route-map export 'map01' # set protocols bgp 65536 neighbor 192.0.2.25 address-family ipv4-unicast soft-reconfiguration inbound # set protocols bgp 65536 neighbor 203.0.113.5 address-family ipv6-unicast attribute-unchanged next-hop - name: parse configs vyos.vyos.vyos_bgp_address_family: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed # Module execution result: # # "parsed": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "as_set": true, # "prefix": "192.0.2.0/24" # } # ], # "networks": [ # { # "prefix": "192.1.13.0/24", # "route_map": "map01" # }, # { # "backdoor": true, # "prefix": "192.2.13.0/24" # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 20, # "protocol": "ripng" # } # ] # } # ], # "as_number": 65536, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "route_map": [ # { # "action": "export", # "route_map": "map01" # } # ], # "soft_reconfiguration": true # } # ], # "neighbor_address": "192.0.2.25" # }, # { # "address_family": [ # { # "afi": "ipv6", # "attribute_unchanged": { # "next_hop": true # } # } # ], # "neighbor_address": "203.0.113.5" # } # ] # # Using gathered: # Native config: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 100 address-family ipv4-unicast network 35.1.1.0/24 backdoor - # set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' - # set protocols bgp 100 address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only - # set protocols bgp 100 address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' - # set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override - # set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med - # set protocols bgp 100 neighbor 100.11.34.12 + # set protocols bgp system-as 100 + # set protocols bgp address-family ipv4-unicast network 35.1.1.0/24 backdoor + # set protocols bgp address-family ipv4-unicast redistribute static metric '50' + # set protocols bgp address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only + # set protocols bgp address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' + # set protocols bgp address-family ipv6-unicast redistribute static metric '50' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override + # set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med + # set protocols bgp neighbor 100.11.34.12 - name: gather configs vyos.vyos.vyos_bgp_address_family: state: gathered # Module execution result: # # "gathered": { # "address_family": [ # { # "afi": "ipv4", # "networks": [ # { # "backdoor": true, # "prefix": "35.1.1.0/24" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "aggregate_address": [ # { # "prefix": "6601:1:1:1::/64", # "summary_only": true # } # ], # "networks": [ # { # "prefix": "5001:1:1:1::/64", # "route_map": "map01" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # Using rendered: - name: Render vyos.vyos.vyos_bgp_address_family: config: as_number: "100" address_family: - afi: "ipv4" redistribute: - protocol: "static" metric: 50 neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" maximum_prefix: 45 nexthop_self: true route_map: - action: "export" route_map: "map01" - action: "import" route_map: "map01" weight: 50 state: rendered # Module Execution: # "rendered": [ - # "set protocols bgp 100 address-family ipv4-unicast redistribute static metric 50", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", - # "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", - # "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight 50" + # "set protocols bgp address-family ipv4-unicast redistribute static metric 50", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", + # "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", + # "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight 50" # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['sample command 1', 'sample command 2', 'sample command 3']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['sample command 1', 'sample command 2', 'sample command 3']


Status ------ Authors ~~~~~~~ - Gomathi Selvi Srinivasan (@GomathiselviS) diff --git a/docs/vyos.vyos.vyos_bgp_global_module.rst b/docs/vyos.vyos.vyos_bgp_global_module.rst index 64a1b7e0..ecf44968 100644 --- a/docs/vyos.vyos.vyos_bgp_global_module.rst +++ b/docs/vyos.vyos.vyos_bgp_global_module.rst @@ -1,2423 +1,2431 @@ .. _vyos.vyos.vyos_bgp_global_module: ************************* vyos.vyos.vyos_bgp_global ************************* **BGP global resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages BGP global configuration of interfaces on devices running VYOS. -- Tested against VYOS 1.3, 1.4 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 +- The provided examples of commands are valid for VyOS 1.4+ Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A dict of BGP global configuration for interfaces.
as_number
integer
AS number.
bgp_params
dictionary
BGP parameters
always_compare_med
boolean
    Choices:
  • no
  • yes
Always compare MEDs from different neighbors
bestpath
dictionary
Default bestpath selection mechanism
as_path
string
    Choices:
  • confed
  • ignore
AS-path attribute comparison parameters
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare the router-id for identical EBGP paths
med
string
    Choices:
  • confed
  • missing-as-worst
MED attribute comparison parameters
cluster_id
string
Route-reflector cluster-id
confederation
list / elements=dictionary
AS confederation parameters
identifier
integer
Confederation AS identifier
peers
integer
Peer ASs in the BGP confederation
dampening
dictionary
Enable route-flap dampening
half_life
integer
Half-life penalty in seconds
max_suppress_time
integer
Maximum duration to suppress a stable route
re_use
integer
Time to start reusing a route
start_suppress_time
integer
When to start suppressing a route
default
dictionary
BGP defaults
local_pref
integer
Default local preference
no_ipv4_unicast
boolean
    Choices:
  • no
  • yes
Deactivate IPv4 unicast for a peer by default Deprecated: Unavailable after 1.4
deterministic_med
boolean
    Choices:
  • no
  • yes
Compare MEDs between different peers in the same AS
disable_network_import_check
boolean
    Choices:
  • no
  • yes
Disable IGP route check for network statements
distance
list / elements=dictionary
Administrative distances for BGP routes
prefix
integer
Administrative distance for a specific BGP prefix
type
string
    Choices:
  • external
  • internal
  • local
Type of route
value
integer
distance
enforce_first_as
boolean
    Choices:
  • no
  • yes
Require first AS in the path to match peer's AS
graceful_restart
integer
Maximum time to hold onto restarting peer's stale paths
log_neighbor_changes
boolean
    Choices:
  • no
  • yes
Log neighbor up/down changes and reset reason
no_client_to_client_reflection
boolean
    Choices:
  • no
  • yes
Disable client to client route reflection
no_fast_external_failover
boolean
    Choices:
  • no
  • yes
Disable immediate session reset if peer's connected link goes down
router_id
string
BGP router-id
scan_time
integer
BGP route scanner interval
neighbor
list / elements=dictionary
BGP neighbor
address
string
BGP neighbor address (v4/v6).
advertisement_interval
integer
Minimum interval for sending routing updates.
capability
dictionary
Advertise capabilities to this neighbor.
dynamic
boolean
    Choices:
  • no
  • yes
Advertise dynamic capability to this neighbor.
extended_nexthop
boolean
    Choices:
  • no
  • yes
Advertise extended nexthop capability to this neighbor.
default_originate
string
Send default route to this neighbor
description
string
Description of the neighbor
disable_capability_negotiation
boolean
    Choices:
  • no
  • yes
Disbale capability negotiation with the neighbor
disable_connected_check
boolean
    Choices:
  • no
  • yes
Disable check to see if EBGP peer's address is a connected route.
disable_send_community
string
    Choices:
  • extended
  • standard
Disable sending community attributes to this neighbor.
ebgp_multihop
integer
Allow this EBGP neighbor to not be on a directly connected network. Specify the number hops.
local_as
integer
local as number not to be prepended to updates from EBGP peers
override_capability
boolean
    Choices:
  • no
  • yes
Ignore capability negotiation with specified neighbor.
passive
boolean
    Choices:
  • no
  • yes
Do not initiate a session with this neighbor
password
string
BGP MD5 password
peer_group
boolean
    Choices:
  • no
  • yes
True if all the configs under this neighbor key is for peer group template.
peer_group_name
string
IPv4 peer group for this peer
port
integer
Neighbor's BGP port
remote_as
integer
Neighbor BGP AS number
shutdown
boolean
    Choices:
  • no
  • yes
Administratively shut down neighbor
solo
boolean
    Choices:
  • no
  • yes
Do not send back prefixes learned from the neighbor
strict_capability_match
boolean
    Choices:
  • no
  • yes
Enable strict capability negotiation
timers
dictionary
Neighbor timers
connect
integer
BGP connect timer for this neighbor.
holdtime
integer
BGP hold timer for this neighbor
keepalive
integer
BGP keepalive interval for this neighbor
ttl_security
integer
Number of the maximum number of hops to the BGP peer
update_source
string
Source IP of routing updates
timers
dictionary
BGP protocol timers
holdtime
integer
Hold time interval
keepalive
integer
Keepalive interval
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • deleted
  • merged ←
  • purged
  • replaced
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.
State purged removes all the BGP configurations from the target device. Use caution with this state.('delete protocols bgp <x>')
State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context.
Running states deleted and replaced will result in an error if there are address-family configuration lines present under neighbor context that is is to be removed. Please use the vyos.vyos.vyos_bgp_address_family module for prior cleanup.
Refer to examples for more details.

Examples -------- .. code-block:: yaml # Using merged # Before state # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ - name: Merge provided configuration with device configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" aggregate_address: - prefix: "203.0.113.0/24" as_set: true - prefix: "192.0.2.0/24" summary_only: true network: - address: "192.1.13.0/24" backdoor: true redistribute: - protocol: "kernel" metric: 45 - protocol: "connected" route_map: "map01" maximum_paths: - path: "ebgp" count: 20 - path: "ibgp" count: 55 timers: keepalive: 35 bgp_params: bestpath: as_path: "confed" compare_routerid: true default: no_ipv4_unicast: true router_id: "192.1.2.9" confederation: - peers: 20 - peers: 55 - identifier: 66 neighbor: - address: "192.0.2.25" disable_connected_check: true timers: holdtime: 30 keepalive: 10 - address: "203.0.113.5" attribute_unchanged: as_path: true med: true ebgp_multihop: 2 remote_as: 101 update_source: "192.0.2.25" - address: "5001::64" maximum_prefix: 34 distribute_list: - acl: 20 action: "export" - acl: 40 action: "import" state: merged # After State # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' - # set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' - # set protocols bgp 65536 maximum-paths ebgp '20' - # set protocols bgp 65536 maximum-paths ibgp '55' - # set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' - # set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' - # set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' - # set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' - # set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' - # set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' - # set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' - # set protocols bgp 65536 network 192.1.13.0/24 'backdoor' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters confederation identifier '66' - # set protocols bgp 65536 parameters confederation peers '20' - # set protocols bgp 65536 parameters confederation peers '55' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters router-id '192.1.2.9' - # set protocols bgp 65536 redistribute connected route-map 'map01' - # set protocols bgp 65536 redistribute kernel metric '45' - # set protocols bgp 65536 timers keepalive '35' + # set protocols bgp system-as 65536 + # set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' + # set protocols bgp aggregate-address 203.0.113.0/24 'as-set' + # set protocols bgp maximum-paths ebgp '20' + # set protocols bgp maximum-paths ibgp '55' + # set protocols bgp neighbor 192.0.2.25 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.25 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.25 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' + # set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' + # set protocols bgp neighbor 203.0.113.5 remote-as '101' + # set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' + # set protocols bgp neighbor 5001::64 distribute-list export '20' + # set protocols bgp neighbor 5001::64 distribute-list import '40' + # set protocols bgp neighbor 5001::64 maximum-prefix '34' + # set protocols bgp network 192.1.13.0/24 'backdoor' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters confederation identifier '66' + # set protocols bgp parameters confederation peers '20' + # set protocols bgp parameters confederation peers '55' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters router-id '192.1.2.9' + # set protocols bgp redistribute connected route-map 'map01' + # set protocols bgp redistribute kernel metric '45' + # set protocols bgp timers keepalive '35' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "before": {}, # "changed": true, # "commands": [ - # "set protocols bgp 65536 neighbor 192.0.2.25 disable-connected-check", - # "set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime 30", - # "set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive 10", - # "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged as-path", - # "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged med", - # "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged next-hop", - # "set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop 2", - # "set protocols bgp 65536 neighbor 203.0.113.5 remote-as 101", - # "set protocols bgp 65536 neighbor 203.0.113.5 update-source 192.0.2.25", - # "set protocols bgp 65536 neighbor 5001::64 maximum-prefix 34", - # "set protocols bgp 65536 neighbor 5001::64 distribute-list export 20", - # "set protocols bgp 65536 neighbor 5001::64 distribute-list import 40", - # "set protocols bgp 65536 redistribute kernel metric 45", - # "set protocols bgp 65536 redistribute connected route-map map01", - # "set protocols bgp 65536 network 192.1.13.0/24 backdoor", - # "set protocols bgp 65536 aggregate-address 203.0.113.0/24 as-set", - # "set protocols bgp 65536 aggregate-address 192.0.2.0/24 summary-only", - # "set protocols bgp 65536 parameters bestpath as-path confed", - # "set protocols bgp 65536 parameters bestpath compare-routerid", - # "set protocols bgp 65536 parameters default no-ipv4-unicast", - # "set protocols bgp 65536 parameters router-id 192.1.2.9", - # "set protocols bgp 65536 parameters confederation peers 20", - # "set protocols bgp 65536 parameters confederation peers 55", - # "set protocols bgp 65536 parameters confederation identifier 66", - # "set protocols bgp 65536 maximum-paths ebgp 20", - # "set protocols bgp 65536 maximum-paths ibgp 55", - # "set protocols bgp 65536 timers keepalive 35" + # "set protocols bgp neighbor 192.0.2.25 disable-connected-check", + # "set protocols bgp neighbor 192.0.2.25 timers holdtime 30", + # "set protocols bgp neighbor 192.0.2.25 timers keepalive 10", + # "set protocols bgp neighbor 203.0.113.5 attribute-unchanged as-path", + # "set protocols bgp neighbor 203.0.113.5 attribute-unchanged med", + # "set protocols bgp neighbor 203.0.113.5 attribute-unchanged next-hop", + # "set protocols bgp neighbor 203.0.113.5 ebgp-multihop 2", + # "set protocols bgp neighbor 203.0.113.5 remote-as 101", + # "set protocols bgp neighbor 203.0.113.5 update-source 192.0.2.25", + # "set protocols bgp neighbor 5001::64 maximum-prefix 34", + # "set protocols bgp neighbor 5001::64 distribute-list export 20", + # "set protocols bgp neighbor 5001::64 distribute-list import 40", + # "set protocols bgp redistribute kernel metric 45", + # "set protocols bgp redistribute connected route-map map01", + # "set protocols bgp network 192.1.13.0/24 backdoor", + # "set protocols bgp aggregate-address 203.0.113.0/24 as-set", + # "set protocols bgp aggregate-address 192.0.2.0/24 summary-only", + # "set protocols bgp parameters bestpath as-path confed", + # "set protocols bgp parameters bestpath compare-routerid", + # "set protocols bgp parameters default no-ipv4-unicast", + # "set protocols bgp parameters router-id 192.1.2.9", + # "set protocols bgp parameters confederation peers 20", + # "set protocols bgp parameters confederation peers 55", + # "set protocols bgp parameters confederation identifier 66", + # "set protocols bgp maximum-paths ebgp 20", + # "set protocols bgp maximum-paths ibgp 55", + # "set protocols bgp timers keepalive 35" # ], # Using replaced: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' - # set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' - # set protocols bgp 65536 maximum-paths ebgp '20' - # set protocols bgp 65536 maximum-paths ibgp '55' - # set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' - # set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' - # set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' - # set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' - # set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' - # set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' - # set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' - # set protocols bgp 65536 network 192.1.13.0/24 'backdoor' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters confederation identifier '66' - # set protocols bgp 65536 parameters confederation peers '20' - # set protocols bgp 65536 parameters confederation peers '55' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters router-id '192.1.2.9' - # set protocols bgp 65536 redistribute connected route-map 'map01' - # set protocols bgp 65536 redistribute kernel metric '45' - # set protocols bgp 65536 timers keepalive '35' + # set protocols bgp system-as 65536 + # set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' + # set protocols bgp aggregate-address 203.0.113.0/24 'as-set' + # set protocols bgp maximum-paths ebgp '20' + # set protocols bgp maximum-paths ibgp '55' + # set protocols bgp neighbor 192.0.2.25 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.25 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.25 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' + # set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' + # set protocols bgp neighbor 203.0.113.5 remote-as '101' + # set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' + # set protocols bgp neighbor 5001::64 distribute-list export '20' + # set protocols bgp neighbor 5001::64 distribute-list import '40' + # set protocols bgp neighbor 5001::64 maximum-prefix '34' + # set protocols bgp network 192.1.13.0/24 'backdoor' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters confederation identifier '66' + # set protocols bgp parameters confederation peers '20' + # set protocols bgp parameters confederation peers '55' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters router-id '192.1.2.9' + # set protocols bgp redistribute connected route-map 'map01' + # set protocols bgp redistribute kernel metric '45' + # set protocols bgp timers keepalive '35' # vyos@vyos:~$ - name: Replace vyos.vyos.vyos_bgp_global: config: as_number: "65536" network: - address: "203.0.113.0/24" route_map: map01 redistribute: - protocol: "static" route_map: "map01" neighbor: - address: "192.0.2.40" advertisement_interval: 72 capability: orf: "receive" bgp_params: bestpath: as_path: "confed" state: replaced # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval '72' - # set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list 'receive' - # set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 redistribute static route-map 'map01' + # set protocols bgp system-as 65536 + # set protocols bgp neighbor 192.0.2.40 advertisement-interval '72' + # set protocols bgp neighbor 192.0.2.40 capability orf prefix-list 'receive' + # set protocols bgp network 203.0.113.0/24 route-map 'map01' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed" # } # }, # "neighbor": [ # { # "address": "192.0.2.40", # "advertisement_interval": 72, # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # "before": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "changed": true, # "commands": [ - # "delete protocols bgp 65536 timers", - # "delete protocols bgp 65536 maximum-paths ", - # "delete protocols bgp 65536 maximum-paths ", - # "delete protocols bgp 65536 parameters router-id 192.1.2.9", - # "delete protocols bgp 65536 parameters default", - # "delete protocols bgp 65536 parameters confederation", - # "delete protocols bgp 65536 parameters bestpath compare-routerid", - # "delete protocols bgp 65536 aggregate-address", - # "delete protocols bgp 65536 network 192.1.13.0/24", - # "delete protocols bgp 65536 redistribute kernel", - # "delete protocols bgp 65536 redistribute kernel", - # "delete protocols bgp 65536 redistribute connected", - # "delete protocols bgp 65536 redistribute connected", - # "delete protocols bgp 65536 neighbor 5001::64", - # "delete protocols bgp 65536 neighbor 203.0.113.5", - # "delete protocols bgp 65536 neighbor 192.0.2.25", - # "set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval 72", - # "set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list receive", - # "set protocols bgp 65536 redistribute static route-map map01", - # "set protocols bgp 65536 network 203.0.113.0/24 route-map map01" + # "delete protocols bgp timers", + # "delete protocols bgp maximum-paths ", + # "delete protocols bgp maximum-paths ", + # "delete protocols bgp parameters router-id 192.1.2.9", + # "delete protocols bgp parameters default", + # "delete protocols bgp parameters confederation", + # "delete protocols bgp parameters bestpath compare-routerid", + # "delete protocols bgp aggregate-address", + # "delete protocols bgp network 192.1.13.0/24", + # "delete protocols bgp redistribute kernel", + # "delete protocols bgp redistribute kernel", + # "delete protocols bgp redistribute connected", + # "delete protocols bgp redistribute connected", + # "delete protocols bgp neighbor 5001::64", + # "delete protocols bgp neighbor 203.0.113.5", + # "delete protocols bgp neighbor 192.0.2.25", + # "set protocols bgp neighbor 192.0.2.40 advertisement-interval 72", + # "set protocols bgp neighbor 192.0.2.40 capability orf prefix-list receive", + # "set protocols bgp redistribute static route-map map01", + # "set protocols bgp network 203.0.113.0/24 route-map map01" # ], # Using deleted: # ------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval '72' - # set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list 'receive' - # set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 redistribute static route-map 'map01' + # set protocols bgp system-as 65536 + # set protocols bgp neighbor 192.0.2.40 advertisement-interval '72' + # set protocols bgp neighbor 192.0.2.40 capability orf prefix-list 'receive' + # set protocols bgp network 203.0.113.0/24 route-map 'map01' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ - name: Delete configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: deleted # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # set protocols bgp '65536' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "as_number": 65536 # }, # "before": { # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed" # } # }, # "neighbor": [ # { # "address": "192.0.2.40", # "advertisement_interval": 72, # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # "changed": true, # "commands": [ - # "delete protocols bgp 65536 neighbor 192.0.2.40", - # "delete protocols bgp 65536 redistribute", - # "delete protocols bgp 65536 network", - # "delete protocols bgp 65536 parameters" + # "delete protocols bgp neighbor 192.0.2.40", + # "delete protocols bgp redistribute", + # "delete protocols bgp network", + # "delete protocols bgp parameters" # ], # Using purged: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' - # set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' - # set protocols bgp 65536 maximum-paths ebgp '20' - # set protocols bgp 65536 maximum-paths ibgp '55' - # set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' - # set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' - # set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' - # set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' - # set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' - # set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' - # set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' - # set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' - # set protocols bgp 65536 network 192.1.13.0/24 'backdoor' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters confederation identifier '66' - # set protocols bgp 65536 parameters confederation peers '20' - # set protocols bgp 65536 parameters confederation peers '55' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters router-id '192.1.2.9' - # set protocols bgp 65536 redistribute connected route-map 'map01' - # set protocols bgp 65536 redistribute kernel metric '45' - # set protocols bgp 65536 timers keepalive '35' + # set protocols bgp system-as 65536 + # set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' + # set protocols bgp aggregate-address 203.0.113.0/24 'as-set' + # set protocols bgp maximum-paths ebgp '20' + # set protocols bgp maximum-paths ibgp '55' + # set protocols bgp neighbor 192.0.2.25 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.25 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.25 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' + # set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' + # set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' + # set protocols bgp neighbor 203.0.113.5 remote-as '101' + # set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' + # set protocols bgp neighbor 5001::64 distribute-list export '20' + # set protocols bgp neighbor 5001::64 distribute-list import '40' + # set protocols bgp neighbor 5001::64 maximum-prefix '34' + # set protocols bgp network 192.1.13.0/24 'backdoor' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters confederation identifier '66' + # set protocols bgp parameters confederation peers '20' + # set protocols bgp parameters confederation peers '55' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters router-id '192.1.2.9' + # set protocols bgp redistribute connected route-map 'map01' + # set protocols bgp redistribute kernel metric '45' + # set protocols bgp timers keepalive '35' # vyos@vyos:~$ - name: Purge configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: purged # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ # # Module Execution: # # "after": {}, # "before": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "changed": true, # "commands": [ # "delete protocols bgp 65536" # ], # Deleted in presence of address family under neighbors: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' - # set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' - # set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' - # set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' - # set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' - # set protocols bgp 65536 parameters 'always-compare-med' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters dampening half-life '33' - # set protocols bgp 65536 parameters dampening max-suppress-time '20' - # set protocols bgp 65536 parameters dampening re-use '60' - # set protocols bgp 65536 parameters dampening start-suppress-time '5' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters distance global external '66' - # set protocols bgp 65536 parameters distance global internal '20' - # set protocols bgp 65536 parameters distance global local '10' - # set protocols bgp 65536 redistribute static route-map 'map01' + # set protocols bgp system-as 65536 + # set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' + # set protocols bgp neighbor 192.0.2.43 capability 'dynamic' + # set protocols bgp neighbor 192.0.2.43 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.43 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.43 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' + # set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' + # set protocols bgp network 203.0.113.0/24 route-map 'map01' + # set protocols bgp parameters 'always-compare-med' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters dampening half-life '33' + # set protocols bgp parameters dampening max-suppress-time '20' + # set protocols bgp parameters dampening re-use '60' + # set protocols bgp parameters dampening start-suppress-time '5' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters distance global external '66' + # set protocols bgp parameters distance global internal '20' + # set protocols bgp parameters distance global local '10' + # set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ ^C # vyos@vyos:~$ - name: Delete configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: deleted # Module Execution: # # "changed": false, # "invocation": { # "module_args": { # "config": { # "aggregate_address": null, # "as_number": 65536, # "bgp_params": null, # "maximum_paths": null, # "neighbor": null, # "network": null, # "redistribute": null, # "timers": null # }, # "running_config": null, # "state": "deleted" # } # }, # "msg": "Use the _bgp_address_family module to delete the address_family under neighbor 203.0.113.0, before replacing/deleting the neighbor." # } # using gathered: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" - # set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' - # set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' - # set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' - # set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' - # set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' - # set protocols bgp 65536 parameters 'always-compare-med' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters dampening half-life '33' - # set protocols bgp 65536 parameters dampening max-suppress-time '20' - # set protocols bgp 65536 parameters dampening re-use '60' - # set protocols bgp 65536 parameters dampening start-suppress-time '5' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters distance global external '66' - # set protocols bgp 65536 parameters distance global internal '20' - # set protocols bgp 65536 parameters distance global local '10' - # set protocols bgp 65536 redistribute static route-map 'map01' + # set protocols bgp system-as 65536 + # set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' + # set protocols bgp neighbor 192.0.2.43 capability 'dynamic' + # set protocols bgp neighbor 192.0.2.43 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.43 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.43 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' + # set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' + # set protocols bgp network 203.0.113.0/24 route-map 'map01' + # set protocols bgp parameters 'always-compare-med' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters dampening half-life '33' + # set protocols bgp parameters dampening max-suppress-time '20' + # set protocols bgp parameters dampening re-use '60' + # set protocols bgp parameters dampening start-suppress-time '5' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters distance global external '66' + # set protocols bgp parameters distance global internal '20' + # set protocols bgp parameters distance global local '10' + # set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ ^C - name: gather configs vyos.vyos.vyos_bgp_global: state: gathered # Module Execution: # "gathered": { # "as_number": 65536, # "bgp_params": { # "always_compare_med": true, # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "default": { # "no_ipv4_unicast": true # }, # "distance": [ # { # "type": "external", # "value": 66 # }, # { # "type": "internal", # "value": 20 # }, # { # "type": "local", # "value": 10 # } # ] # }, # "neighbor": [ # { # "address": "192.0.2.43", # "advertisement_interval": 72, # "capability": { # "dynamic": true # }, # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.0", # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # # Using parsed: # ------------ # parsed.cfg - # set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' - # set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' - # set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' - # set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' - # set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' - # set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' - # set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' - # set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' - # set protocols bgp 65536 parameters 'always-compare-med' - # set protocols bgp 65536 parameters bestpath as-path 'confed' - # set protocols bgp 65536 parameters bestpath 'compare-routerid' - # set protocols bgp 65536 parameters dampening half-life '33' - # set protocols bgp 65536 parameters dampening max-suppress-time '20' - # set protocols bgp 65536 parameters dampening re-use '60' - # set protocols bgp 65536 parameters dampening start-suppress-time '5' - # set protocols bgp 65536 parameters default 'no-ipv4-unicast' - # set protocols bgp 65536 parameters distance global external '66' - # set protocols bgp 65536 parameters distance global internal '20' - # set protocols bgp 65536 parameters distance global local '10' - # set protocols bgp 65536 redistribute static route-map 'map01' + # set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' + # set protocols bgp neighbor 192.0.2.43 capability 'dynamic' + # set protocols bgp neighbor 192.0.2.43 'disable-connected-check' + # set protocols bgp neighbor 192.0.2.43 timers holdtime '30' + # set protocols bgp neighbor 192.0.2.43 timers keepalive '10' + # set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' + # set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' + # set protocols bgp network 203.0.113.0/24 route-map 'map01' + # set protocols bgp parameters 'always-compare-med' + # set protocols bgp parameters bestpath as-path 'confed' + # set protocols bgp parameters bestpath 'compare-routerid' + # set protocols bgp parameters dampening half-life '33' + # set protocols bgp parameters dampening max-suppress-time '20' + # set protocols bgp parameters dampening re-use '60' + # set protocols bgp parameters dampening start-suppress-time '5' + # set protocols bgp parameters default 'no-ipv4-unicast' + # set protocols bgp parameters distance global external '66' + # set protocols bgp parameters distance global internal '20' + # set protocols bgp parameters distance global local '10' + # set protocols bgp redistribute static route-map 'map01' - name: parse configs vyos.vyos.vyos_bgp_global: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed tags: - parsed # Module execution: # "parsed": { # "as_number": 65536, # "bgp_params": { # "always_compare_med": true, # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "default": { # "no_ipv4_unicast": true # }, # "distance": [ # { # "type": "external", # "value": 66 # }, # { # "type": "internal", # "value": 20 # }, # { # "type": "local", # "value": 10 # } # ] # }, # "neighbor": [ # { # "address": "192.0.2.43", # "advertisement_interval": 72, # "capability": { # "dynamic": true # }, # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.0", # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # } # # Using rendered: # -------------- - name: Render vyos.vyos.vyos_bgp_global: config: as_number: "65536" network: - address: "203.0.113.0/24" route_map: map01 redistribute: - protocol: "static" route_map: "map01" bgp_params: always_compare_med: true dampening: start_suppress_time: 5 max_suppress_time: 20 half_life: 33 re_use: 60 distance: - type: "internal" value: 20 - type: "local" value: 10 - type: "external" value: 66 bestpath: as_path: "confed" compare_routerid: true default: no_ipv4_unicast: true neighbor: - address: "192.0.2.43" disable_connected_check: true advertisement_interval: 72 capability: dynamic: true timers: holdtime: 30 keepalive: 10 - address: "203.0.113.0" capability: orf: "receive" state: rendered # Module Execution: # "rendered": [ - # "set protocols bgp 65536 neighbor 192.0.2.43 disable-connected-check", - # "set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval 72", - # "set protocols bgp 65536 neighbor 192.0.2.43 capability dynamic", - # "set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime 30", - # "set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive 10", - # "set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list receive", - # "set protocols bgp 65536 redistribute static route-map map01", - # "set protocols bgp 65536 network 203.0.113.0/24 route-map map01", - # "set protocols bgp 65536 parameters always-compare-med", - # "set protocols bgp 65536 parameters dampening half-life 33", - # "set protocols bgp 65536 parameters dampening max-suppress-time 20", - # "set protocols bgp 65536 parameters dampening re-use 60", - # "set protocols bgp 65536 parameters dampening start-suppress-time 5", - # "set protocols bgp 65536 parameters distance global internal 20", - # "set protocols bgp 65536 parameters distance global local 10", - # "set protocols bgp 65536 parameters distance global external 66", - # "set protocols bgp 65536 parameters bestpath as-path confed", - # "set protocols bgp 65536 parameters bestpath compare-routerid", - # "set protocols bgp 65536 parameters default no-ipv4-unicast" + # "set protocols bgp neighbor 192.0.2.43 disable-connected-check", + # "set protocols bgp neighbor 192.0.2.43 advertisement-interval 72", + # "set protocols bgp neighbor 192.0.2.43 capability dynamic", + # "set protocols bgp neighbor 192.0.2.43 timers holdtime 30", + # "set protocols bgp neighbor 192.0.2.43 timers keepalive 10", + # "set protocols bgp neighbor 203.0.113.0 capability orf prefix-list receive", + # "set protocols bgp redistribute static route-map map01", + # "set protocols bgp network 203.0.113.0/24 route-map map01", + # "set protocols bgp parameters always-compare-med", + # "set protocols bgp parameters dampening half-life 33", + # "set protocols bgp parameters dampening max-suppress-time 20", + # "set protocols bgp parameters dampening re-use 60", + # "set protocols bgp parameters dampening start-suppress-time 5", + # "set protocols bgp parameters distance global internal 20", + # "set protocols bgp parameters distance global local 10", + # "set protocols bgp parameters distance global external 66", + # "set protocols bgp parameters bestpath as-path confed", + # "set protocols bgp parameters bestpath compare-routerid", + # "set protocols bgp parameters default no-ipv4-unicast" # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
-
['set protocols bgp 65536 redistribute static route-map map01', 'set protocols bgp 65536 network 203.0.113.0/24 route-map map01', 'set protocols bgp 65536 parameters always-compare-med']
+
['set protocols bgp redistribute static route-map map01', 'set protocols bgp network 203.0.113.0/24 route-map map01', 'set protocols bgp parameters always-compare-med']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
-
['set protocols bgp 65536 redistribute static route-map map01', 'set protocols bgp 65536 network 203.0.113.0/24 route-map map01', 'set protocols bgp 65536 parameters always-compare-med']
+
['set protocols bgp redistribute static route-map map01', 'set protocols bgp network 203.0.113.0/24 route-map map01', 'set protocols bgp parameters always-compare-med']


Status ------ Authors ~~~~~~~ - Gomathi Selvi Srinivasan (@GomathiselviS) diff --git a/docs/vyos.vyos.vyos_command_module.rst b/docs/vyos.vyos.vyos_command_module.rst index 34506d48..d3e96752 100644 --- a/docs/vyos.vyos.vyos_command_module.rst +++ b/docs/vyos.vyos.vyos_command_module.rst @@ -1,262 +1,262 @@ .. _vyos.vyos.vyos_command_module: ********************** vyos.vyos.vyos_command ********************** **Run one or more commands on VyOS devices** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - The command module allows running one or more commands on remote devices running VyOS. This module can also be introspected to validate key parameters before returning successfully. If the conditional statements are not met in the wait period, the task fails. - Certain ``show`` commands in VyOS produce many lines of output and use a custom pager that can cause this module to hang. If the value of the environment variable ``ANSIBLE_VYOS_TERMINAL_LENGTH`` is not set, the default number of 10000 is used. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
commands
list / elements=raw / required
The ordered set of commands to execute on the remote device running VyOS. The output from the command execution is returned to the playbook. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded.
If a command sent to the device requires answering a prompt, it is possible to pass a dict containing command, answer and prompt. Common answers are 'y' or "\r" (carriage return, must be double quotes). Refer below examples.
interval
integer
Default:
1
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again.
match
string
    Choices:
  • any
  • all ←
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied.
retries
integer
Default:
9
Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals.
The commands are run once when retries is set to 0.
wait_for
list / elements=string
Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples.

aliases: waitfor

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - Running ``show system boot-messages all`` will cause the module to hang since VyOS is using a custom pager setting to display the output of that command. - If a command sent to the device requires answering a prompt, it is possible to pass a dict containing *command*, *answer* and *prompt*. See examples. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: show configuration on ethernet devices eth0 and eth1 vyos.vyos.vyos_command: commands: - show interfaces ethernet {{ item }} with_items: - eth0 - eth1 - name: run multiple commands and check if version output contains specific version string vyos.vyos.vyos_command: commands: - show version - show hardware cpu wait_for: - result[0] contains 'VyOS 1.1.7' - name: run command that requires answering a prompt vyos.vyos.vyos_command: commands: - command: rollback 1 prompt: Proceed with reboot? [confirm][y] answer: y Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
failed_conditions
list
failed
The list of conditionals that have failed

Sample:
['...', '...']
stdout
list
always apart from low level errors (such as action plugin)
The set of responses from the commands

Sample:
['...', '...']
stdout_lines
list
always
The value of stdout split into a list

Sample:
[['...', '...'], ['...'], ['...']]
warnings
list
always
The list of warnings (if any) generated by module based on arguments

Sample:
['...', '...']


Status ------ Authors ~~~~~~~ - Nathaniel Case (@Qalthos) diff --git a/docs/vyos.vyos.vyos_config_module.rst b/docs/vyos.vyos.vyos_config_module.rst index 999a3f58..1efbd38f 100644 --- a/docs/vyos.vyos.vyos_config_module.rst +++ b/docs/vyos.vyos.vyos_config_module.rst @@ -1,396 +1,396 @@ .. _vyos.vyos.vyos_config_module: ********************* vyos.vyos.vyos_config ********************* **Manage VyOS configuration on remote device** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module provides configuration file management of VyOS devices. It provides arguments for managing both the configuration file and state of the active configuration. All configuration statements are based on `set` and `delete` commands in the device configuration. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
backup
boolean
    Choices:
  • no ←
  • yes
The backup argument will backup the current devices active configuration to the Ansible control host prior to making any changes. If the backup_options value is not given, the backup file will be located in the backup folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
backup_options
dictionary
This is a dict object containing configurable options related to backup file path. The value of this option is read only when backup is set to yes, if backup is set to no this option will be silently ignored.
dir_path
path
This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of filename or default filename as described in filename options description. If the path value is not given in that case a backup directory will be created in the current working directory and backup configuration will be copied in filename within backup directory.
filename
string
The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time>
comment
string
Default:
"configured by vyos_config"
Allows a commit description to be specified to be included when the configuration is committed. If the configuration is not changed or committed, this argument is ignored.
config
string
The config argument specifies the base configuration to use to compare against the desired configuration. If this value is not specified, the module will automatically retrieve the current active configuration from the remote device. The configuration lines in the option value should be similar to how it will appear if present in the running-configuration of the device including indentation to ensure idempotency and correct diff.
lines
list / elements=string
The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config as found in the device running-config to ensure idempotency and correct diff. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser.
match
string
    Choices:
  • line ←
  • none
The match argument controls the method used to match against the current active configuration. By default, the desired config is matched against the active config and the deltas are loaded. If the match argument is set to none the active configuration is ignored and the configuration is always loaded.
save
boolean
    Choices:
  • no ←
  • yes
The save argument controls whether or not changes made to the active configuration are saved to disk. This is independent of committing the config. When set to True, the active configuration is saved.
src
path
The src argument specifies the path to the source config file to load. The source config file can either be in bracket format or set format. The source file can include Jinja2 template variables. The configuration lines in the source file should be similar to how it will appear if present in the running-configuration of the device including indentation to ensure idempotency and correct diff.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - To ensure idempotency and correct diff the configuration lines in the relevant module options should be similar to how they appear if present in the running configuration on device including the indentation. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: configure the remote device vyos.vyos.vyos_config: lines: - set system host-name {{ inventory_hostname }} - set service lldp - delete service dhcp-server - name: backup and load from file vyos.vyos.vyos_config: src: vyos.cfg backup: true - name: render a Jinja2 template onto the VyOS router vyos.vyos.vyos_config: src: vyos_template.j2 - name: for idempotency, use full-form commands vyos.vyos.vyos_config: lines: # - set int eth eth2 description 'OUTSIDE' - set interface ethernet eth2 description 'OUTSIDE' - name: configurable backup path vyos.vyos.vyos_config: backup: true backup_options: filename: backup.cfg dir_path: /home/user Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
backup_path
string
when backup is yes
The full path to the backup file

Sample:
/playbooks/ansible/backup/vyos_config.2016-07-16@22:28:34
commands
list
always
The list of configuration commands sent to the device

Sample:
['...', '...']
date
string
when backup is yes
The date extracted from the backup file name

Sample:
2016-07-16
filename
string
when backup is yes and filename is not specified in backup options
The name of the backup file

Sample:
vyos_config.2016-07-16@22:28:34
filtered
list
always
The list of configuration commands removed to avoid a load failure

Sample:
['...', '...']
shortname
string
when backup is yes and filename is not specified in backup options
The full path to the backup file excluding the timestamp

Sample:
/playbooks/ansible/backup/vyos_config
time
string
when backup is yes
The time extracted from the backup file name

Sample:
22:28:34


Status ------ Authors ~~~~~~~ - Nathaniel Case (@Qalthos) diff --git a/docs/vyos.vyos.vyos_facts_module.rst b/docs/vyos.vyos.vyos_facts_module.rst index 836224ff..ec45d6d5 100644 --- a/docs/vyos.vyos.vyos_facts_module.rst +++ b/docs/vyos.vyos.vyos_facts_module.rst @@ -1,330 +1,330 @@ .. _vyos.vyos.vyos_facts_module: ******************** vyos.vyos.vyos_facts ******************** **Get facts about vyos devices.** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - Collects facts from network devices running the vyos operating system. This module places the facts gathered in the fact tree keyed by the respective resource name. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
available_network_resources
boolean
    Choices:
  • no ←
  • yes
When 'True' a list of network resources for which resource modules are available will be provided.
gather_network_resources
list / elements=string
When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all and the resources like interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected. Valid subsets are 'all', 'interfaces', 'l3_interfaces', 'lag_interfaces', 'lldp_global', 'lldp_interfaces', 'static_routes', 'firewall_rules', 'firewall_global', 'firewall_interfaces', 'ospfv3', 'ospfv2'.
gather_subset
list / elements=string
Default:
"min"
When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, default, config, neighbors and min. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml # Gather all facts - vyos.vyos.vyos_facts: gather_subset: all gather_network_resources: all # collect only the config and default facts - vyos.vyos.vyos_facts: gather_subset: config # collect everything exception the config - vyos.vyos.vyos_facts: gather_subset: '!config' # Collect only the interfaces facts - vyos.vyos.vyos_facts: gather_subset: - '!all' - '!min' gather_network_resources: - interfaces # Do not collect interfaces facts - vyos.vyos.vyos_facts: gather_network_resources: - '!interfaces' # Collect interfaces and minimal default facts - vyos.vyos.vyos_facts: gather_subset: min gather_network_resources: interfaces Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
ansible_net_api
string
always
The name of the transport
ansible_net_commits
list
when present
The set of available configuration revisions
ansible_net_config
string
when config is configured
The running-config from the device
ansible_net_gather_network_resources
list
always
The list of fact resource subsets collected from the device
ansible_net_gather_subset
list
always
The list of subsets gathered by the module
ansible_net_hostname
string
always
The configured system hostname
ansible_net_model
string
always
The device model string
ansible_net_neighbors
list
when interface is configured
The set of LLDP neighbors
ansible_net_python_version
string
always
The Python version Ansible controller is using
ansible_net_serialnum
string
always
The serial number of the device
ansible_net_version
string
always
The version of the software running


Status ------ Authors ~~~~~~~ - Nathaniel Case (@qalthos) - Nilashish Chakraborty (@Nilashishc) - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_firewall_global_module.rst b/docs/vyos.vyos.vyos_firewall_global_module.rst index 76f2ca7a..8ab253c2 100644 --- a/docs/vyos.vyos.vyos_firewall_global_module.rst +++ b/docs/vyos.vyos.vyos_firewall_global_module.rst @@ -1,1882 +1,1883 @@ .. _vyos.vyos.vyos_firewall_global_module: ****************************** vyos.vyos.vyos_firewall_global ****************************** **Firewall global resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manage global policies or configurations for firewall on VyOS devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A dictionary of Firewall global configuration options.
config_trap
boolean
    Choices:
  • no
  • yes
SNMP trap generation on firewall configuration changes.
group
dictionary
Defines a group of objects for referencing in firewall rules.
address_group
list / elements=dictionary
Defines a group of IP addresses for referencing in firewall rules.
afi
string
    Choices:
  • ipv4 ←
  • ipv6
Specifies IP address type
description
string
Allows you to specify a brief description for the address group.
members
list / elements=dictionary
Address-group members.
IPv4 address to match.
IPv4 range to match.
address
string
IP address.
name
string / required
Name of the firewall address group.
network_group
list / elements=dictionary
Defines a group of networks for referencing in firewall rules.
afi
string
    Choices:
  • ipv4 ←
  • ipv6
Specifies network address type
description
string
Allows you to specify a brief description for the network group.
members
list / elements=dictionary
Adds an IPv4 network to the specified network group.
The format is ip-address/prefix.
address
string
IP address.
name
string / required
Name of the firewall network group.
port_group
list / elements=dictionary
Defines a group of ports for referencing in firewall rules.
description
string
A brief description for the port group.
members
list / elements=dictionary
Port-group member.
port
string
Specified port.
name
string / required
Name of the firewall port group.
log_martians
boolean
    Choices:
  • no
  • yes
Specifies whether or not to record packets with invalid addresses in the log.
(True) Logs packets with invalid addresses.
(False) Does not log packets with invalid addresses.
ping
dictionary
Policy for handling of all IPv4 ICMP echo requests.
all
boolean
    Choices:
  • no
  • yes
Enables or disables response to all IPv4 ICMP Echo Request (ping) messages.
The system responds to IPv4 ICMP Echo Request messages.
broadcast
boolean
    Choices:
  • no
  • yes
Enables or disables response to broadcast IPv4 ICMP Echo Request and Timestamp Request messages.
IPv4 ICMP Echo and Timestamp Request messages are not processed.
route_redirects
list / elements=dictionary
A dictionary of Firewall ICMP redirect and source route global configuration options.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Specifies IP address type
icmp_redirects
dictionary
Specifies whether to allow sending/receiving of IPv4/v6 ICMP redirect messages.
receive
boolean
    Choices:
  • no
  • yes
Permits or denies receiving packets ICMP redirect messages.
send
boolean
    Choices:
  • no
  • yes
Permits or denies transmitting packets ICMP redirect messages.
ip_src_route
boolean
    Choices:
  • no
  • yes
Specifies whether or not to process source route IP options.
state_policy
list / elements=dictionary
Specifies global firewall state-policy.
action
string
    Choices:
  • accept
  • drop
  • reject
Action for packets part of an established connection.
connection_type
string
    Choices:
  • established
  • invalid
  • related
Specifies connection type.
log
boolean
    Choices:
  • no
  • yes
Enable logging of packets part of an established connection.
log_level
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warn
  • notice
  • info
  • debug
Specify log level for packets logged.
Only available in 1.4+
syn_cookies
boolean
    Choices:
  • no
  • yes
Specifies policy for using TCP SYN cookies with IPv4.
(True) Enables TCP SYN cookies with IPv4.
(False) Disables TCP SYN cookies with IPv4.
twa_hazards_protection
boolean
    Choices:
  • no
  • yes
RFC1337 TCP TIME-WAIT assassination hazards protection.
validation
string
    Choices:
  • strict
  • loose
  • disable
Specifies a policy for source validation by reversed path, as defined in RFC 3704.
(disable) No source validation is performed.
(loose) Enable Loose Reverse Path Forwarding as defined in RFC3704.
(strict) Enable Strict Reverse Path Forwarding as defined in RFC3704.
running_config
string
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command show configuration commands | grep 'firewall'
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.

Notes ----- .. note:: - - Tested against VyOS 1.3.8. + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. + - The provided examples of commands are valid for VyOS 1.4+ - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep firewall # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: all: true broadcast: true state_policy: - connection_type: established action: accept log: true log_level: emerg - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: send: true receive: false group: address_group: - name: MGMT-HOSTS description: This group has the Management hosts address list members: - address: 192.0.1.1 - address: 192.0.1.3 - address: 192.0.1.5 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ # "set firewall group address-group MGMT-HOSTS address 192.0.1.1", # "set firewall group address-group MGMT-HOSTS address 192.0.1.3", # "set firewall group address-group MGMT-HOSTS address 192.0.1.5", # "set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list'", # "set firewall group address-group MGMT-HOSTS", # "set firewall group network-group MGMT network 192.0.1.0/24", # "set firewall group network-group MGMT description 'This group has the Management network addresses'", # "set firewall group network-group MGMT", # "set firewall global-options ip-src-route 'enable'", # "set firewall global-options receive-redirects 'disable'", # "set firewall global-options send-redirects 'enable'", # "set firewall global-options config-trap 'enable'", # "set firewall global-options state-policy established action 'accept'", - # "set firewall global-options state-policy established log 'enable'", + # "set firewall global-options state-policy established log, # "set firewall global-options state-policy established log-level 'emerg'", # "set firewall global-options state-policy invalid action 'reject'", # "set firewall global-options broadcast-ping 'enable'", # "set firewall global-options all-ping 'enable'", # "set firewall global-options log-martians 'enable'", # "set firewall global-options twa-hazards-protection 'enable'", # "set firewall global-options syn-cookies 'enable'", # "set firewall global-options source-validation 'strict'" # ] # # "after": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # # # Using parsed # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_global: running_config: | set firewall global-options all-ping 'enable' set firewall global-options broadcast-ping 'enable' set firewall global-options config-trap 'enable' set firewall global-options ip-src-route 'enable' set firewall global-options log-martians 'enable' set firewall global-options receive-redirects 'disable' set firewall global-options send-redirects 'enable' set firewall global-options source-validation 'strict' set firewall global-options state-policy established action 'accept' set firewall global-options state-policy established log 'enable' set firewall global-options state-policy invalid action 'reject' set firewall global-options syn-cookies 'enable' set firewall global-options twa-hazards-protection 'enable'" set firewall group address-group ENG-HOSTS address '192.0.3.1' set firewall group address-group ENG-HOSTS address '192.0.3.2' set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' set firewall group address-group SALES-HOSTS address '192.0.2.1' set firewall group address-group SALES-HOSTS address '192.0.2.2' set firewall group address-group SALES-HOSTS address '192.0.2.3' set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' set firewall group network-group MGMT description 'This group has the Management network addresses' set firewall group network-group MGMT network '192.0.1.0/24' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # } # # # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Delete attributes of firewall. vyos.vyos.vyos_firewall_global: config: state_policy: config_trap: log_martians: syn_cookies: twa_hazards_protection: route_redirects: ping: group: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # "commands": [ # "delete firewall global-options source-validation", # "delete firewall global-options group", # "delete firewall global-options log-martians", # "delete firewall global-options ip-src-route", # "delete firewall global-options receive-redirects", # "delete firewall global-options send-redirects", # "delete firewall global-options config-trap", # "delete firewall global-options state-policy", # "delete firewall global-options syn-cookies", # "delete firewall global-options broadcast-ping", # "delete firewall global-options all-ping", # "delete firewall global-options twa-hazards-protection" # ] # # "after": [] # # After state # ------------ # vyos@192# run show configuration commands | grep firewall # set 'firewall' # # # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Replace firewall global attributes configuration. vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: null all: true broadcast: true state_policy: - connection_type: established action: accept log: true - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: send: true receive: false group: address_group: - name: SALES-HOSTS description: Sales office hosts address list members: - address: 192.0.2.1 - address: 192.0.2.2 - address: 192.0.2.3 - name: ENG-HOSTS description: Sales office hosts address list members: - address: 192.0.3.1 - address: 192.0.3.2 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # "commands": [ # "delete firewall group address-group MGMT-HOSTS", # "set firewall group address-group SALES-HOSTS address 192.0.2.1", # "set firewall group address-group SALES-HOSTS address 192.0.2.2", # "set firewall group address-group SALES-HOSTS address 192.0.2.3", # "set firewall group address-group SALES-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group SALES-HOSTS", # "set firewall group address-group ENG-HOSTS address 192.0.3.1", # "set firewall group address-group ENG-HOSTS address 192.0.3.2", # "set firewall group address-group ENG-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group ENG-HOSTS" # ] # # "after": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # # # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Gather firewall global config with provided configurations vyos.vyos.vyos_firewall_global: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: null all: true broadcast: true state_policy: - connection_type: established action: accept log: true - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: null send: true receive: false group: address_group: - name: SALES-HOSTS description: Sales office hosts address list members: - address: 192.0.2.1 - address: 192.0.2.2 - address: 192.0.2.3 - name: ENG-HOSTS description: Sales office hosts address list members: - address: 192.0.3.1 - address: 192.0.3.2 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set firewall group address-group SALES-HOSTS address 192.0.2.1", # "set firewall group address-group SALES-HOSTS address 192.0.2.2", # "set firewall group address-group SALES-HOSTS address 192.0.2.3", # "set firewall group address-group SALES-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group SALES-HOSTS", # "set firewall group address-group ENG-HOSTS address 192.0.3.1", # "set firewall group address-group ENG-HOSTS address 192.0.3.2", # "set firewall group address-group ENG-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group ENG-HOSTS", # "set firewall group network-group MGMT network 192.0.1.0/24", # "set firewall group network-group MGMT description 'This group has the Management network addresses'", # "set firewall group network-group MGMT", # "set firewall global-options ip-src-route 'enable'", # "set firewall global-options receive-redirects 'disable'", # "set firewall global-options send-redirects 'enable'", # "set firewall global-options config-trap 'enable'", # "set firewall global-options state-policy established action 'accept'", - # "set firewall global-options state-policy established log 'enable'", + # "set firewall global-options state-policy established log, # "set firewall global-options state-policy invalid action 'reject'", # "set firewall global-options broadcast-ping 'enable'", # "set firewall global-options all-ping 'enable'", # "set firewall global-options log-martians 'enable'", # "set firewall global-options twa-hazards-protection 'enable'", # "set firewall global-options syn-cookies 'enable'", # "set firewall global-options source-validation 'strict'" # ] # Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set firewall group address-group ENG-HOSTS', 'set firewall group address-group ENG-HOSTS address 192.0.3.1']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['set firewall group address-group ENG-HOSTS', 'set firewall group address-group ENG-HOSTS address 192.0.3.1']


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_firewall_rules_module.rst b/docs/vyos.vyos.vyos_firewall_rules_module.rst index 75536b89..982dd1d4 100644 --- a/docs/vyos.vyos.vyos_firewall_rules_module.rst +++ b/docs/vyos.vyos.vyos_firewall_rules_module.rst @@ -1,2952 +1,2941 @@ .. _vyos.vyos.vyos_firewall_rules_module: ***************************** vyos.vyos.vyos_firewall_rules ***************************** **Firewall rules resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages firewall rule-set attributes on VyOS devices Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Firewall rule-set options.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Specifies the type of rule-set.
rule_sets
list / elements=dictionary
The Firewall rule-set list.
default_action
string
    Choices:
  • drop
  • reject
  • accept
  • jump
Default action for rule-set.
drop (Drop if no prior rules are hit (default))
reject (Drop and notify source if no prior rules are hit)
accept (Accept if no prior rules are hit)
jump (Jump to another rule-set, 1.4+)
default_jump_target
string
Default jump target if the default action is jump.
Only valid in 1.4 and later.
Only valid when default_action = jump.
description
string
Rule set description.
enable_default_log
boolean
    Choices:
  • no
  • yes
Option to log packets hitting default-action.
filter
string
    Choices:
  • input
  • output
  • forward
Filter type (exclusive to "name").
Supported in 1.4 and later.
name
string
Firewall rule set name.
Required for 1.3- and optional for 1.4+.
rules
list / elements=dictionary
A dictionary that specifies the rule-set configurations.
action
string
    Choices:
  • drop
  • reject
  • accept
  • inspect
  • continue
  • return
  • jump
  • queue
  • synproxy
Specifying the action.
inspect is available < 1.4
continue, return, jump, queue, synproxy are available >= 1.4
description
string
Description of this rule.
destination
dictionary
Specifying the destination parameters.
address
string
Destination ip address subnet or range.
IPv4/6 address, subnet or range to match.
Match everything except the specified address, subnet or range.
Destination ip address subnet or range.
group
dictionary
Destination group.
address_group
string
Group of addresses.
network_group
string
Group of networks.
port_group
string
Group of ports.
port
string
Multiple destination ports can be specified as a comma-separated list.
The whole list can also be "negated" using '!'.
For example:'!22,telnet,http,123,1001-1005'.
disable
boolean
    Choices:
  • no
  • yes
Option to disable firewall rule.
aliased to disabled

aliases: disabled
fragment
string
    Choices:
  • match-frag
  • match-non-frag
IP fragment match.
icmp
dictionary
ICMP type and code information.
code
integer
ICMP code.
type
integer
ICMP type.
type_name
string
    Choices:
  • any
  • echo-reply
  • destination-unreachable
  • network-unreachable
  • host-unreachable
  • protocol-unreachable
  • port-unreachable
  • fragmentation-needed
  • source-route-failed
  • network-unknown
  • host-unknown
  • network-prohibited
  • host-prohibited
  • TOS-network-unreachable
  • TOS-host-unreachable
  • communication-prohibited
  • host-precedence-violation
  • precedence-cutoff
  • source-quench
  • redirect
  • network-redirect
  • host-redirect
  • TOS-network-redirect
  • TOS-host-redirect
  • echo-request
  • router-advertisement
  • router-solicitation
  • time-exceeded
  • ttl-zero-during-transit
  • ttl-zero-during-reassembly
  • parameter-problem
  • ip-header-bad
  • required-option-missing
  • timestamp-request
  • timestamp-reply
  • address-mask-request
  • address-mask-reply
  • ping
  • pong
  • ttl-exceeded
ICMP type-name.
inbound_interface
dictionary
Inbound interface.
Only valid in 1.4 and later.
group
string
Interface group.
name
string
Interface name.
Can have wildcards
ipsec
string
    Choices:
  • match-ipsec
  • match-none
  • match-ipsec-in
  • match-ipsec-out
  • match-none-in
  • match-none-out
Inbound ip sec packets.
VyOS 1.4 and older match-ipsec/match-none
VyOS 1.5 and later require -in/-out suffixes
jump_target
string
Jump target if the action is jump.
Only valid in 1.4 and later.
Only valid when action = jump.
limit
dictionary
Rate limit using a token bucket filter.
burst
integer
Maximum number of packets to allow in excess of rate.
rate
dictionary
format for rate (integer/time unit).
any one of second, minute, hour or day may be used to specify time unit.
eg. 1/second implies rule to be matched at an average of once per second.
number
integer
This is the integer value.
unit
string
This is the time unit.
log
string
    Choices:
  • disable
  • enable
Option to log packets matching rule.
number
integer / required
Rule number.
outbound_interface
dictionary
Match outbound interface.
Only valid in 1.4 and later.
group
string
Interface group.
name
string
Interface name.
Can have wildcards
packet_length
list / elements=dictionary
Packet length match.
Only valid in 1.4 and later.
Multiple values from 1 to 65535 and ranges are supported
length
string
Packet length or range.
packet_length_exclude
list / elements=dictionary
Packet length match.
Only valid in 1.4 and later.
Multiple values from 1 to 65535 and ranges are supported
length
string
Packet length or range.
packet_type
string
    Choices:
  • broadcast
  • multicast
  • host
  • other
Packet type match.
protocol
string
Protocol to match (protocol name in /etc/protocols or protocol number or all).
<text> IP protocol name from /etc/protocols (e.g. "tcp" or "udp").
<0-255> IP protocol number.
tcp_udp Both TCP and UDP.
all All IP protocols.
(!)All IP protocols except for the specified name or number.
queue
string
Queue options.
Only valid in 1.4 and later.
Only valid when action = queue.
Can be a queue number or range.
queue_options
string
    Choices:
  • bypass
  • fanout
Queue options.
Only valid in 1.4 and later.
Only valid when action = queue.
recent
dictionary
Parameters for matching recently seen sources.
count
integer
Source addresses seen more than N times.
time
string
Source addresses seen in the last N seconds.
Since 1.4, this is a string of second/minute/hour
source
dictionary
Source parameters.
address
string
Source ip address subnet or range.
IPv4/6 address, subnet or range to match.
Match everything except the specified address, subnet or range.
Source ip address subnet or range.
fqdn
string
Fully qualified domain name.
Available in 1.4 and later.
group
dictionary
Source group.
address_group
string
Group of addresses.
network_group
string
Group of networks.
port_group
string
Group of ports.
mac_address
string
<MAC address> MAC address to match.
<!MAC address> Match everything except the specified MAC address.
port
string
Multiple source ports can be specified as a comma-separated list.
The whole list can also be "negated" using '!'.
For example:'!22,telnet,http,123,1001-1005'.
state
dictionary
Session state.
established
boolean
    Choices:
  • no
  • yes
Established state.
invalid
boolean
    Choices:
  • no
  • yes
Invalid state.
new
boolean
    Choices:
  • no
  • yes
New state.
related
boolean
    Choices:
  • no
  • yes
Related state.
synproxy
dictionary
SYN proxy options.
Only valid in 1.4 and later.
Only valid when action = synproxy.
mss
integer
Adjust MSS (501-65535)
window_scale
integer
Window scale (1-14).
tcp
dictionary
TCP flags to match.
flags
list / elements=dictionary
list of tcp flags to be matched
5.0 breaking change to support 1.4+ and 1.3-
flag
string
    Choices:
  • ack
  • cwr
  • ecn
  • fin
  • psh
  • rst
  • syn
  • urg
  • all
TCP flag to be matched.
syn, ack, fin, rst, urg, psh, all (1.3-)
syn, ack, fin, rst, urg, psh, cwr, ecn (1.4+)
invert
boolean
    Choices:
  • no
  • yes
Invert the match.
time
dictionary
Time to match rule.
monthdays
string
Monthdays to match rule on.
startdate
string
Date to start matching rule.
starttime
string
Time of day to start matching rule.
stopdate
string
Date to stop matching rule.
stoptime
string
Time of day to stop matching rule.
utc
boolean
    Choices:
  • no
  • yes
Interpret times for startdate, stopdate, starttime and stoptime to be UTC.
weekdays
string
Weekdays to match rule on.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep firewall.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state the configuration should be left in

Notes ----- .. note:: - - Tested against VyOS 1.3.8. + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. + - The provided examples of commands are valid for VyOS 1.4+ - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using deleted to delete firewall rules based on rule-set name # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall name Downlink default-action 'accept' - # set firewall name Downlink description 'IPv4 INBOUND rule set' - # set firewall name Downlink rule 501 action 'accept' - # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - # set firewall name Downlink rule 501 ipsec 'match-ipsec' - # set firewall name Downlink rule 502 action 'reject' - # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - # set firewall name Downlink rule 502 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink default-action 'accept' + # set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + # set firewall ipv4 name Downlink rule 501 action 'accept' + # set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + # set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink rule 502 action 'reject' + # set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + # set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ - # "delete firewall name Downlink" + # "delete firewall ipv4 name Downlink" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using deleted to delete firewall rules based on afi # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' # set firewall group address-group 'inbound' - # set firewall name Downlink default-action 'accept' - # set firewall name Downlink description 'IPv4 INBOUND rule set' - # set firewall name Downlink rule 501 action 'accept' - # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - # set firewall name Downlink rule 501 ipsec 'match-ipsec' - # set firewall name Downlink rule 502 action 'reject' - # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - # set firewall name Downlink rule 502 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink default-action 'accept' + # set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + # set firewall ipv4 name Downlink rule 501 action 'accept' + # set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + # set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink rule 502 action 'reject' + # set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + # set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ - # "delete firewall name" + # "delete firewall ipv4 name" # ] # # "after": [] # After state # ------------ # vyos@vyos:~$ show configuration commands| grep firewall - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' # Using deleted to delete all the the firewall rules when provided config is empty # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall name Downlink default-action 'accept' - # set firewall name Downlink description 'IPv4 INBOUND rule set' - # set firewall name Downlink rule 501 action 'accept' - # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - # set firewall name Downlink rule 501 ipsec 'match-ipsec' - # set firewall name Downlink rule 502 action 'reject' - # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - # set firewall name Downlink rule 502 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink default-action 'accept' + # set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + # set firewall ipv4 name Downlink rule 501 action 'accept' + # set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + # set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink rule 502 action 'reject' + # set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + # set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' # - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ - # "delete firewall name" + # "delete firewall ipv4 name" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept rules: - number: 1 action: accept description: Fwipv6-Rule 1 is configured by Ansible ipsec: match-ipsec - number: 2 action: accept description: Fwipv6-Rule 2 is configured by Ansible ipsec: match-ipsec - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ - # "set firewall ipv6-name UPLINK default-action 'accept'", - # "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", - # "set firewall ipv6-name UPLINK rule 1 action 'accept'", - # "set firewall ipv6-name UPLINK rule 1", - # "set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'", - # "set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'", - # "set firewall ipv6-name UPLINK rule 2 action 'accept'", - # "set firewall ipv6-name UPLINK rule 2", - # "set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'", - # "set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'", - # "set firewall name INBOUND default-action 'accept'", - # "set firewall name INBOUND description 'IPv4 INBOUND rule set'", - # "set firewall name INBOUND rule 101 action 'accept'", - # "set firewall name INBOUND rule 101", - # "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", - # "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", - # "set firewall name INBOUND rule 102 action 'reject'", - # "set firewall name INBOUND rule 102", - # "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", - # "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", - # "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", - # "set firewall name INBOUND rule 103 destination group address-group inbound", - # "set firewall name INBOUND rule 103", - # "set firewall name INBOUND rule 103 source address 192.0.2.0", - # "set firewall name INBOUND rule 103 state established enable", - # "set firewall name INBOUND rule 103 state related enable", - # "set firewall name INBOUND rule 103 state invalid disable", - # "set firewall name INBOUND rule 103 state new disable", - # "set firewall name INBOUND rule 103 action 'accept'" + # "set firewall ipv6 name UPLINK default-action 'accept'", + # "set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set'", + # "set firewall ipv6 name UPLINK rule 1 action 'accept'", + # "set firewall ipv6 name UPLINK rule 1", + # "set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'", + # "set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec'", + # "set firewall ipv6 name UPLINK rule 2 action 'accept'", + # "set firewall ipv6 name UPLINK rule 2", + # "set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'", + # "set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec'", + # "set firewall ipv4 name INBOUND default-action 'accept'", + # "set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set'", + # "set firewall ipv4 name INBOUND rule 101 action 'accept'", + # "set firewall ipv4 name INBOUND rule 101", + # "set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec'", + # "set firewall ipv4 name INBOUND rule 102 action 'reject'", + # "set firewall ipv4 name INBOUND rule 102", + # "set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec'", + # "set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 103 destination group address-group inbound", + # "set firewall ipv4 name INBOUND rule 103", + # "set firewall ipv4 name INBOUND rule 103 source address 192.0.2.0", + # "set firewall ipv4 name INBOUND rule 103 state established", + # "set firewall ipv4 name INBOUND rule 103 state related", + # "set firewall ipv4 name INBOUND rule 103 action 'accept'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 102 action 'reject' - # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' - # set firewall name INBOUND rule 102 ipsec 'match-ipsec' - # set firewall name INBOUND rule 103 action 'accept' - # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' - # set firewall name INBOUND rule 103 destination group address-group 'inbound' - # set firewall name INBOUND rule 103 source address '192.0.2.0' - # set firewall name INBOUND rule 103 state established 'enable' - # set firewall name INBOUND rule 103 state invalid 'disable' - # set firewall name INBOUND rule 103 state new 'disable' - # set firewall name INBOUND rule 103 state related 'enable' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 102 action 'reject' + # set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 103 action 'accept' + # set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' + # set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' + # set firewall ipv4 name INBOUND rule 103 state established + # set firewall ipv4 name INBOUND rule 103 state related # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 102 action 'reject' - # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' - # set firewall name INBOUND rule 102 ipsec 'match-ipsec' - # set firewall name INBOUND rule 103 action 'accept' - # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' - # set firewall name INBOUND rule 103 destination group address-group 'inbound' - # set firewall name INBOUND rule 103 source address '192.0.2.0' - # set firewall name INBOUND rule 103 state established 'enable' - # set firewall name INBOUND rule 103 state invalid 'disable' - # set firewall name INBOUND rule 103 state new 'disable' - # set firewall name INBOUND rule 103 state related 'enable' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 102 action 'reject' + # set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 103 action 'accept' + # set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' + # set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' + # set firewall ipv4 name INBOUND rule 103 state established + # set firewall ipv4 name INBOUND rule 103 state related # - name: >- Replace device configurations of listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 104 action: reject description: Rule 104 is configured by Ansible ipsec: match-none state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # "commands": [ - # "delete firewall ipv6-name UPLINK rule 1", - # "delete firewall ipv6-name UPLINK rule 2", - # "delete firewall name INBOUND rule 102", - # "delete firewall name INBOUND rule 103", - # "set firewall name INBOUND rule 104 action 'reject'", - # "set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'", - # "set firewall name INBOUND rule 104", - # "set firewall name INBOUND rule 104 ipsec 'match-none'" + # "delete firewall ipv6 name UPLINK rule 1", + # "delete firewall ipv6 name UPLINK rule 2", + # "delete firewall ipv4 name INBOUND rule 102", + # "delete firewall ipv4 name INBOUND rule 103", + # "set firewall ipv4 name INBOUND rule 104 action 'reject'", + # "set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 104", + # "set firewall ipv4 name INBOUND rule 104 ipsec 'match-none'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 104 action 'reject' - # set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' - # set firewall name INBOUND rule 104 ipsec 'match-none' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 104 action 'reject' + # set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 104 ipsec 'match-none' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 104 action 'reject' - # set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' - # set firewall name INBOUND rule 104 ipsec 'match-none' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 104 action 'reject' + # set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 104 ipsec 'match-none' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink description: IPv4 INBOUND rule set default_action: accept rules: - number: 501 action: accept description: Rule 501 is configured by Ansible ipsec: match-ipsec - number: 502 action: reject description: Rule 502 is configured by Ansible ipsec: match-ipsec state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # "commands": [ - # "delete firewall ipv6-name UPLINK", - # "delete firewall name INBOUND", - # "set firewall name Downlink default-action 'accept'", - # "set firewall name Downlink description 'IPv4 INBOUND rule set'", - # "set firewall name Downlink rule 501 action 'accept'", - # "set firewall name Downlink rule 501", - # "set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'", - # "set firewall name Downlink rule 501 ipsec 'match-ipsec'", - # "set firewall name Downlink rule 502 action 'reject'", - # "set firewall name Downlink rule 502", - # "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", - # "set firewall name Downlink rule 502 ipsec 'match-ipsec'" + # "delete firewall ipv6 name UPLINK", + # "delete firewall ipv4 name INBOUND", + # "set firewall ipv4 name Downlink default-action 'accept'", + # "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'", + # "set firewall ipv4 name Downlink rule 501 action 'accept'", + # "set firewall ipv4 name Downlink rule 501", + # "set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible'", + # "set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec'", + # "set firewall ipv4 name Downlink rule 502 action 'reject'", + # "set firewall ipv4 name Downlink rule 502", + # "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'", + # "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" # # # "after": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # # # After state # ------------ # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall name Downlink default-action 'accept' - # set firewall name Downlink description 'IPv4 INBOUND rule set' - # set firewall name Downlink rule 501 action 'accept' - # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - # set firewall name Downlink rule 501 ipsec 'match-ipsec' - # set firewall name Downlink rule 502 action 'reject' - # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - # set firewall name Downlink rule 502 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink default-action 'accept' + # set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + # set firewall ipv4 name Downlink rule 501 action 'accept' + # set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + # set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + # set firewall ipv4 name Downlink rule 502 action 'reject' + # set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + # set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' # Using gathered # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 102 action 'reject' - # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' - # set firewall name INBOUND rule 102 ipsec 'match-ipsec' - # set firewall name INBOUND rule 103 action 'accept' - # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' - # set firewall name INBOUND rule 103 destination group address-group 'inbound' - # set firewall name INBOUND rule 103 source address '192.0.2.0' - # set firewall name INBOUND rule 103 state established 'enable' - # set firewall name INBOUND rule 103 state invalid 'disable' - # set firewall name INBOUND rule 103 state new 'disable' - # set firewall name INBOUND rule 103 state related 'enable' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 102 action 'reject' + # set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 103 action 'accept' + # set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' + # set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' + # set firewall ipv4 name INBOUND rule 103 state established + # set firewall ipv4 name INBOUND rule 103 state related # - name: Gather listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' - # set firewall ipv6-name UPLINK default-action 'accept' - # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' - # set firewall ipv6-name UPLINK rule 1 action 'accept' - # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' - # set firewall ipv6-name UPLINK rule 2 action 'accept' - # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' - # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' - # set firewall name INBOUND default-action 'accept' - # set firewall name INBOUND description 'IPv4 INBOUND rule set' - # set firewall name INBOUND rule 101 action 'accept' - # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' - # set firewall name INBOUND rule 101 ipsec 'match-ipsec' - # set firewall name INBOUND rule 102 action 'reject' - # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' - # set firewall name INBOUND rule 102 ipsec 'match-ipsec' - # set firewall name INBOUND rule 103 action 'accept' - # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' - # set firewall name INBOUND rule 103 destination group address-group 'inbound' - # set firewall name INBOUND rule 103 source address '192.0.2.0' - # set firewall name INBOUND rule 103 state established 'enable' - # set firewall name INBOUND rule 103 state invalid 'disable' - # set firewall name INBOUND rule 103 state new 'disable' - # set firewall name INBOUND rule 103 state related 'enable' + # set firewall ipv6 name UPLINK default-action 'accept' + # set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' + # set firewall ipv6 name UPLINK rule 1 action 'accept' + # set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' + # set firewall ipv6 name UPLINK rule 2 action 'accept' + # set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' + # set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND default-action 'accept' + # set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' + # set firewall ipv4 name INBOUND rule 101 action 'accept' + # set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 102 action 'reject' + # set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' + # set firewall ipv4 name INBOUND rule 103 action 'accept' + # set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' + # set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' + # set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' + # set firewall ipv4 name INBOUND rule 103 state established + # set firewall ipv4 name INBOUND rule 103 state related # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ - # "set firewall ipv6-name UPLINK default-action 'accept'", - # "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", - # "set firewall name INBOUND default-action 'accept'", - # "set firewall name INBOUND description 'IPv4 INBOUND rule set'", - # "set firewall name INBOUND rule 101 action 'accept'", - # "set firewall name INBOUND rule 101", - # "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", - # "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", - # "set firewall name INBOUND rule 102 action 'reject'", - # "set firewall name INBOUND rule 102", - # "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", - # "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", - # "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", - # "set firewall name INBOUND rule 103 destination group address-group inbound", - # "set firewall name INBOUND rule 103", - # "set firewall name INBOUND rule 103 source address 192.0.2.0", - # "set firewall name INBOUND rule 103 state established enable", - # "set firewall name INBOUND rule 103 state related enable", - # "set firewall name INBOUND rule 103 state invalid disable", - # "set firewall name INBOUND rule 103 state new disable", - # "set firewall name INBOUND rule 103 action 'accept'" + # "set firewall ipv6 name UPLINK default-action 'accept'", + # "set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set'", + # "set firewall ipv4 name INBOUND default-action 'accept'", + # "set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set'", + # "set firewall ipv4 name INBOUND rule 101 action 'accept'", + # "set firewall ipv4 name INBOUND rule 101", + # "set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec'", + # "set firewall ipv4 name INBOUND rule 102 action 'reject'", + # "set firewall ipv4 name INBOUND rule 102", + # "set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec'", + # "set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", + # "set firewall ipv4 name INBOUND rule 103 destination group address-group inbound", + # "set firewall ipv4 name INBOUND rule 103", + # "set firewall ipv4 name INBOUND rule 103 source address 192.0.2.0", + # "set firewall ipv4 name INBOUND rule 103 state established", + # "set firewall ipv4 name INBOUND rule 103 state related", + # "set firewall ipv4 name INBOUND rule 103 action 'accept'" # ] # Using parsed # # - name: Parse the commands for provided configuration vyos.vyos.vyos_firewall_rules: running_config: "set firewall group address-group 'inbound' - set firewall name Downlink default-action 'accept' - set firewall name Downlink description 'IPv4 INBOUND rule set' - set firewall name Downlink rule 501 action 'accept' - set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - set firewall name Downlink rule 501 ipsec 'match-ipsec' - set firewall name Downlink rule 502 action 'reject' - set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - set firewall name Downlink rule 502 ipsec 'match-ipsec'" + set firewall ipv4 name Downlink default-action 'accept' + set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + set firewall ipv4 name Downlink rule 501 action 'accept' + set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + set firewall ipv4 name Downlink rule 502 action 'reject' + set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
always
The set of commands pushed to the remote device.

Sample:
-
["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]
+
["set firewall ipv4 name Downlink default-action 'accept'", "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'", "set firewall ipv4 name Downlink rule 501 action 'accept'", "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'"]
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
-
["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]
+
["set firewall ipv4 name Downlink default-action 'accept'", "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'", "set firewall ipv4 name Downlink rule 501 action 'accept'", "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) - Gaige B. Paulsen (@gaige) diff --git a/docs/vyos.vyos.vyos_interfaces_module.rst b/docs/vyos.vyos.vyos_interfaces_module.rst index 14f7a473..ce6fe71b 100644 --- a/docs/vyos.vyos.vyos_interfaces_module.rst +++ b/docs/vyos.vyos.vyos_interfaces_module.rst @@ -1,1123 +1,1123 @@ .. _vyos.vyos.vyos_interfaces_module: ************************* vyos.vyos.vyos_interfaces ************************* **Manages interface attributes of VyOS network devices.** Version added: 2.9.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages the interface attributes on VyOS network devices. - This module supports managing base attributes of Ethernet, Bonding, VXLAN, Loopback and Virtual Tunnel Interfaces. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
The provided interface configuration.
description
string
Interface description.
duplex
string
    Choices:
  • full
  • half
  • auto
Interface duplex mode.
Applicable for Ethernet interfaces only.
enabled
boolean
    Choices:
  • no
  • yes ←
Administrative state of the interface.
Set the value to true to administratively enable the interface or false to disable it.

aliases: enable
mtu
integer
MTU for a specific interface. Refer to vendor documentation for valid values.
Applicable for Ethernet, Bonding, VXLAN and Virtual Tunnel interfaces.
name
string / required
Full name of the interface, e.g. eth0, eth1, bond0, vti1, vxlan2.
speed
string
    Choices:
  • auto
  • 10
  • 100
  • 1000
  • 2500
  • 10000
Interface link speed.
Applicable for Ethernet interfaces only.
vifs
list / elements=dictionary
Virtual sub-interfaces related configuration.
802.1Q VLAN interfaces are represented as virtual sub-interfaces in VyOS.
description
string
Virtual sub-interface description.
enabled
boolean
    Choices:
  • no
  • yes ←
Administrative state of the virtual sub-interface.
Set the value to true to administratively enable the interface or false to disable it.

aliases: enable
mtu
integer
MTU for the virtual sub-interface.
Refer to vendor documentation for valid values.
vlan_id
integer
Identifier for the virtual sub-interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep interfaces.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • rendered
  • gathered
  • parsed
The state of the configuration after module completion.

Notes ----- .. note:: - - Tested against VyOS 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding 'bond0' # set interfaces bonding 'bond1' # set interfaces bonding bond2 'ip' # set interfaces bonding bond2 'ipv6' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 'ip' # set interfaces ethernet eth0 'ipv6' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet 'eth1' # set interfaces ethernet 'eth2' - name: Merge provided configuration with device configuration vyos.vyos.vyos_interfaces: config: - name: eth2 description: Configured by Ansible enabled: true vifs: - vlan_id: 200 description: VIF 200 - ETH2 - name: eth3 description: Configured by Ansible mtu: 1500 - name: bond1 description: Bond - 1 mtu: 1200 - name: vti2 description: VTI - 2 enabled: false state: merged # Task Output # ----------- # before: # - enabled: true # name: lo # - enabled: true # name: eth3 # - enabled: true # name: eth2 # - enabled: true # name: eth1 # - duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - set interfaces ethernet eth2 description 'Configured by Ansible' # - set interfaces ethernet eth2 vif 200 # - set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' # - set interfaces ethernet eth3 description 'Configured by Ansible' # - set interfaces ethernet eth3 mtu '1500' # - set interfaces bonding bond1 # - set interfaces bonding bond1 description 'Bond - 1' # - set interfaces bonding bond1 mtu '1200' # - set interfaces vti vti2 # - set interfaces vti vti2 description 'VTI - 2' # - set interfaces vti vti2 disable # after: # - description: Bond - 1 # enabled: true # mtu: 1200 # name: bond1 # - enabled: true # name: lo # - description: VTI - 2 # enabled: false # name: vti2 # - description: Configured by Ansible # enabled: true # mtu: 1500 # name: eth3 # - description: Configured by Ansible # enabled: true # name: eth2 # vifs: # - description: VIF 200 - ETH2 # enabled: true # vlan_id: '200' # - enabled: true # name: eth1 # - duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1200' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' # set interfaces ethernet eth3 description 'Configured by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 mtu '1500' # set interfaces loopback lo # set interfaces vti vti2 description 'VTI - 2' # set interfaces vti vti2 disable # Using replaced # Before state: # ------------- # vyos:~$ show configuration commands | grep eth # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 description 'Management Interface for the Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Eng Team' # set interfaces ethernet eth1 duplex 'full' # set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65' # set interfaces ethernet eth1 smp_affinity 'auto' # set interfaces ethernet eth1 speed '100' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 duplex 'full' # set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79' # set interfaces ethernet eth2 mtu '500' # set interfaces ethernet eth2 smp_affinity 'auto' # set interfaces ethernet eth2 speed '100' # set interfaces ethernet eth2 vif 200 description 'Configured by Ansible' # set interfaces ethernet eth3 description 'Configured by Ansible' # set interfaces ethernet eth3 duplex 'full' # set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85' # set interfaces ethernet eth3 mtu '1500' # set interfaces ethernet eth3 smp_affinity 'auto' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - name: Replace device configurations of listed interfaces with provided configurations vyos.vyos.vyos_interfaces: config: - name: eth2 description: Replaced by Ansible - name: eth3 description: Replaced by Ansible - name: eth1 description: Replaced by Ansible state: replaced # Task Output # ----------- # before: # - description: Bond - 1 # enabled: true # mtu: 1400 # name: bond1 # - enabled: true # name: lo # - description: Configured by Ansible # duplex: full # enabled: true # mtu: 1500 # name: eth3 # speed: '100' # - description: Configured by Ansible # duplex: full # enabled: true # mtu: 500 # name: eth2 # speed: '100' # vifs: # - description: VIF 200 - ETH2 # enabled: true # vlan_id: '200' # - description: Configured by Ansible Eng Team # duplex: full # enabled: true # name: eth1 # speed: '100' # - description: Management Interface for the Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - delete interfaces ethernet eth2 speed # - delete interfaces ethernet eth2 duplex # - delete interfaces ethernet eth2 mtu # - delete interfaces ethernet eth2 vif 200 # - set interfaces ethernet eth2 description 'Replaced by Ansible' # - delete interfaces ethernet eth3 speed # - delete interfaces ethernet eth3 duplex # - delete interfaces ethernet eth3 mtu # - set interfaces ethernet eth3 description 'Replaced by Ansible' # - delete interfaces ethernet eth1 speed # - delete interfaces ethernet eth1 duplex # - set interfaces ethernet eth1 description 'Replaced by Ansible' # after: # - description: Bond - 1 # enabled: true # mtu: 1400 # name: bond1 # - enabled: true # name: lo # - description: Replaced by Ansible # enabled: true # name: eth3 # - description: Replaced by Ansible # enabled: true # name: eth2 # - description: Replaced by Ansible # enabled: true # name: eth1 # - description: Management Interface for the Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Management Interface for the Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Replaced by Ansible' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 description 'Replaced by Ansible' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 description 'Replaced by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # Using overridden # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Ethernet Interface - 0' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 mtu '1200' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Eng Team' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 mtu '100' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth1 vif 100 description 'VIF 100 - ETH1' # set interfaces ethernet eth1 vif 100 disable # set interfaces ethernet eth2 description 'Configured by Ansible Team (Admin Down)' # set interfaces ethernet eth2 disable # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 mtu '600' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 description 'Configured by Ansible Network' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # set interfaces vti vti1 description 'Virtual Tunnel Interface - 1' # set interfaces vti vti1 mtu '68' - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_interfaces: config: - name: eth0 description: Outbound Interface For The Appliance speed: auto duplex: auto - name: eth2 speed: auto duplex: auto - name: eth3 mtu: 1200 state: overridden # Task Output # ----------- # before: # - enabled: true # name: lo # - description: Virtual Tunnel Interface - 1 # enabled: true # mtu: 68 # name: vti1 # - description: Configured by Ansible Network # enabled: true # name: eth3 # - description: Configured by Ansible Team (Admin Down) # enabled: false # mtu: 600 # name: eth2 # - description: Configured by Ansible Eng Team # enabled: true # mtu: 100 # name: eth1 # vifs: # - description: VIF 100 - ETH1 # enabled: false # vlan_id: '100' # - description: Ethernet Interface - 0 # duplex: auto # enabled: true # mtu: 1200 # name: eth0 # speed: auto # commands: # - delete interfaces vti vti1 description # - delete interfaces vti vti1 mtu # - delete interfaces ethernet eth1 description # - delete interfaces ethernet eth1 mtu # - delete interfaces ethernet eth1 vif 100 # - delete interfaces ethernet eth0 mtu # - set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' # - delete interfaces ethernet eth2 description # - delete interfaces ethernet eth2 mtu # - set interfaces ethernet eth2 duplex 'auto' # - delete interfaces ethernet eth2 disable # - set interfaces ethernet eth2 speed 'auto' # - delete interfaces ethernet eth3 description # - set interfaces ethernet eth3 mtu '1200' # after: # - enabled: true # name: lo # - enabled: true # name: vti1 # - enabled: true # mtu: 1200 # name: eth3 # - duplex: auto # enabled: true # name: eth2 # speed: auto # - enabled: true # name: eth1 # - description: Outbound Interface For The Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 duplex 'auto' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 speed 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 mtu '1200' # set interfaces loopback lo # set interfaces vti vti1 # Using deleted # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 description 'LAG - 1' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface for this appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Network' # set interfaces ethernet eth1 duplex 'full' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth1 speed '100' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 disable # set interfaces ethernet eth2 duplex 'full' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 mtu '600' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 speed '100' # set interfaces ethernet eth3 description 'Configured by Ansible Network' # set interfaces ethernet eth3 duplex 'full' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves) vyos.vyos.vyos_interfaces: config: - name: bond1 - name: eth1 - name: eth2 - name: eth3 state: deleted # Task Output # ----------- # before: # - enabled: true # mtu: 1300 # name: bond0 # - description: LAG - 1 # enabled: true # name: bond1 # - enabled: true # name: lo # - description: Configured by Ansible Network # duplex: full # enabled: true # name: eth3 # speed: '100' # - description: Configured by Ansible # duplex: full # enabled: false # mtu: 600 # name: eth2 # speed: '100' # - description: Configured by Ansible Network # duplex: full # enabled: true # name: eth1 # speed: '100' # - description: Outbound Interface for this appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - delete interfaces bonding bond1 description # - delete interfaces ethernet eth1 speed # - delete interfaces ethernet eth1 duplex # - delete interfaces ethernet eth1 description # - delete interfaces ethernet eth2 speed # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 duplex # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 description # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 mtu # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth3 speed # - delete interfaces ethernet eth3 duplex # - delete interfaces ethernet eth3 description # after: # - enabled: true # mtu: 1300 # name: bond0 # - enabled: true # name: bond1 # - enabled: true # name: lo # - enabled: true # name: eth3 # - enabled: true # name: eth2 # - enabled: true # name: eth1 # - description: Outbound Interface for this appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface for this appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # Using gathered # Before state: # ------------- # vyos@192# run show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible' # set interfaces ethernet eth1 duplex 'auto' # set interfaces ethernet eth1 mtu '1500' # set interfaces ethernet eth1 speed 'auto' # set interfaces ethernet eth1 vif 200 description 'VIF - 200' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 duplex 'auto' # set interfaces ethernet eth2 mtu '1500' # set interfaces ethernet eth2 speed 'auto' # set interfaces ethernet eth2 vif 200 description 'VIF - 200' # - name: Gather listed interfaces with provided configurations vyos.vyos.vyos_interfaces: state: gathered # Task output # ----------- # gathered: # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth2 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth1 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - duplex: auto # enabled: true # name: eth0 # speed: auto # Using rendered - name: Render the commands for provided configuration vyos.vyos.vyos_interfaces: config: - name: eth0 enabled: true duplex: auto speed: auto - name: eth1 description: Configured by Ansible - Interface 1 mtu: 1500 speed: auto duplex: auto enabled: true vifs: - vlan_id: 100 description: Eth1 - VIF 100 mtu: 400 enabled: true - vlan_id: 101 description: Eth1 - VIF 101 enabled: true - name: eth2 description: Configured by Ansible - Interface 2 (ADMIN DOWN) mtu: 600 enabled: false state: rendered # Task Output # ----------- # rendered: # - set interfaces ethernet eth0 duplex 'auto' # - set interfaces ethernet eth0 speed 'auto' # - delete interfaces ethernet eth0 disable # - set interfaces ethernet eth1 duplex 'auto' # - delete interfaces ethernet eth1 disable # - set interfaces ethernet eth1 speed 'auto' # - set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1' # - set interfaces ethernet eth1 mtu '1500' # - set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100' # - set interfaces ethernet eth1 vif 100 mtu '400' # - set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101' # - set interfaces ethernet eth2 disable # - set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN # DOWN)' # - set interfaces ethernet eth2 mtu '600' # Using parsed - name: Parse the configuration. vyos.vyos.vyos_interfaces: running_config: "set interfaces ethernet eth0 address 'dhcp' set interfaces ethernet eth0 duplex 'auto' set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' set interfaces ethernet eth0 smp_affinity 'auto' set interfaces ethernet eth0 speed 'auto' set interfaces ethernet eth1 description 'Configured by Ansible' set interfaces ethernet eth1 duplex 'auto' set interfaces ethernet eth1 mtu '1500' set interfaces ethernet eth1 speed 'auto' set interfaces ethernet eth1 vif 200 description 'VIF - 200' set interfaces ethernet eth2 description 'Configured by Ansible' set interfaces ethernet eth2 duplex 'auto' set interfaces ethernet eth2 mtu '1500' set interfaces ethernet eth2 speed 'auto' set interfaces ethernet eth2 vif 200 description 'VIF - 200'" state: parsed # Task output # ----------- # parsed: # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth2 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth1 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - duplex: auto # enabled: true # name: eth0 # speed: auto Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
list
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
list
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set interfaces ethernet eth1 mtu 1200', 'set interfaces ethernet eth2 vif 100 description VIF 100']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['set interfaces ethernet eth1 mtu 1200', 'set interfaces ethernet eth2 vif 100 description VIF 100']


Status ------ Authors ~~~~~~~ - Nilashish Chakraborty (@nilashishc) - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_lag_interfaces_module.rst b/docs/vyos.vyos.vyos_lag_interfaces_module.rst index 4f3e559d..534f2081 100644 --- a/docs/vyos.vyos.vyos_lag_interfaces_module.rst +++ b/docs/vyos.vyos.vyos_lag_interfaces_module.rst @@ -1,944 +1,944 @@ .. _vyos.vyos.vyos_lag_interfaces_module: ***************************** vyos.vyos.vyos_lag_interfaces ***************************** **LAG interfaces resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages attributes of link aggregation groups on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of link aggregation group configurations.
arp_monitor
dictionary
ARP Link monitoring parameters.
interval
integer
ARP link monitoring frequency in milliseconds.
target
list / elements=string
IP address to use for ARP monitoring.
hash_policy
string
    Choices:
  • layer2
  • layer2+3
  • layer3+4
LAG or bonding transmit hash policy.
members
list / elements=dictionary
List of member interfaces for the LAG (bond).
member
string
Name of the member interface.
mode
string
    Choices:
  • 802.3ad
  • active-backup
  • broadcast
  • round-robin
  • transmit-load-balance
  • adaptive-load-balance
  • xor-hash
LAG or bond mode.
name
string / required
Name of the link aggregation group (LAG) or bond.
primary
string
Primary device interfaces for the LAG (bond).
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep bond.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • parsed
  • gathered
  • rendered
The state of the configuration after module completion.

Notes ----- .. note:: - - Tested against VyOS 1.3.8. + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond2 mode: active-backup members: - member: eth2 - member: eth1 hash_policy: layer2 primary: eth2 - name: bond3 mode: active-backup hash_policy: layer2+3 members: - member: eth3 primary: eth3 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # "commands": [ # "set interfaces bonding bond2 hash-policy 'layer2'", # "set interfaces bonding bond2 mode 'active-backup'", # "set interfaces ethernet eth2 bond-group bond2", # "set interfaces ethernet eth1 bond-group bond2", # "set interfaces bonding bond2 primary 'eth2'", # "set interfaces bonding bond3 hash-policy 'layer2+3'", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth3 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ] # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Replace device configurations of listed LAGs with provided configurations vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: 802.3ad hash_policy: layer2 members: - member: eth3 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # "commands": [ # "delete interfaces bonding bond3 primary", # "set interfaces bonding bond3 hash-policy 'layer2'", # "set interfaces bonding bond3 mode '802.3ad'" # ], # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: active-backup members: - member: eth1 - member: eth2 - member: eth3 primary: eth3 hash_policy: layer2 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth1 bond-group bond3", # "set interfaces ethernet eth2 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ], # # "after": [ # { # "name": "bond2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # }, # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # # After state # ------------ # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond3' # set interfaces ethernet eth2 bond-group 'bond3' # set interfaces ethernet eth3 bond-group 'bond3' # Using deleted # # Before state # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Delete LAG attributes of given interfaces (Note - This won't delete the interface itself) vyos.vyos.vyos_lag_interfaces: config: - name: bond2 - name: bond3 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "delete interfaces bonding bond3 hash-policy", # "delete interfaces ethernet eth3 bond-group bond3", # "delete interfaces bonding bond3 mode", # "delete interfaces bonding bond3 primary" # ], # # "after": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # - name: Gather listed lag interfaces with provided configurations vyos.vyos.vyos_lag_interfaces: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond0 hash_policy: layer2 members: - member: eth1 mode: active-backup primary: eth1 - name: bond1 hash_policy: layer2+3 members: - member: eth2 mode: active-backup primary: eth2 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set interfaces bonding bond0 hash-policy 'layer2'", # "set interfaces ethernet eth1 bond-group 'bond0'", # "set interfaces bonding bond0 mode 'active-backup'", # "set interfaces bonding bond0 primary 'eth1'", # "set interfaces bonding bond1 hash-policy 'layer2+3'", # "set interfaces ethernet eth2 bond-group 'bond1'", # "set interfaces bonding bond1 mode 'active-backup'", # "set interfaces bonding bond1 primary 'eth2'" # ] # Using parsed # # - name: Parsed the commands for provided configuration vyos.vyos.vyos_l3_interfaces: running_config: "set interfaces bonding bond0 hash-policy 'layer2' set interfaces bonding bond0 mode 'active-backup' set interfaces bonding bond0 primary 'eth1' set interfaces bonding bond1 hash-policy 'layer2+3' set interfaces bonding bond1 mode 'active-backup' set interfaces bonding bond1 primary 'eth2' set interfaces ethernet eth1 bond-group 'bond0' set interfaces ethernet eth2 bond-group 'bond1'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # } # ], # "mode": "active-backup", # "name": "bond0", # "primary": "eth1" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond1", # "primary": "eth2" # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
list
when changed
The resulting configuration module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration prior to the module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set interfaces bonding bond2', 'set interfaces bonding bond2 hash-policy layer2']


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_lldp_global_module.rst b/docs/vyos.vyos.vyos_lldp_global_module.rst index 9e8758ce..f1c37b34 100644 --- a/docs/vyos.vyos.vyos_lldp_global_module.rst +++ b/docs/vyos.vyos.vyos_lldp_global_module.rst @@ -1,607 +1,607 @@ .. _vyos.vyos.vyos_lldp_global_module: ************************** vyos.vyos.vyos_lldp_global ************************** **LLDP global resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages link layer discovery protocol (LLDP) attributes on VyOS devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
The provided link layer discovery protocol (LLDP) configuration.
address
string
Exactly one management address (exclusive with addresses). Deprecated in favor of addresses. To be removed in 7.0.0.
addresses
list / elements=string
One or more management addresses. The management address is used to identify the management interface of the system. Only addresses connected to the system will be transmitted.
enable
boolean
    Choices:
  • no
  • yes
This argument is a boolean value to enable or disable LLDP.
legacy_protocols
list / elements=string
    Choices:
  • cdp
  • edp
  • fdp
  • sonmp
List of the supported legacy protocols.
snmp
string
This argument enable the SNMP queries to LLDP database.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion.

Notes ----- .. note:: - - Tested against VyOS 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands|grep lldp # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lldp_global: config: legacy_protocols: - fdp - cdp snmp: enable addresses: - 192.0.2.11 state: merged # # # ------------------------ # Module Execution Results # ------------------------ # # before": {} # # commands": [ # "set service lldp legacy-protocols fdp", # "set service lldp legacy-protocols cdp", # "set service lldp snmp enable", # "set service lldp management-address '192.0.2.11'" # ] # # after": { # "snmp": "enable" # "addresses": [ # "192.0.2.11" # ] # "legacy_protocols": [ # "cdp", # "fdp" # ] # "enable": true # } # # After state: # ------------- # # set service lldp legacy-protocols cdp # set service lldp legacy-protocols fdp # set service lldp management-address '192.0.2.11' # set service lldp snmp enable # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols fdp # set service lldp management-address '192.0.2.11' # set service lldp snmp enable # - name: Replace device configurations with provided configurations vyos.vyos.vyos_lldp_global: config: legacy_protocols: - edp - sonmp - cdp addresses: - 192.0.2.14 state: replaced # # # ------------------------ # Module Execution Results # ------------------------ # # # "before": { # "snmp": "enable" # "addresses": [ # "192.0.2.11" # ] # "legacy_protocols": [ # "cdp", # "fdp" # ] # "enable": true # } # # "commands": [ # "delete service lldp snmp", # "delete service lldp legacy-protocols fdp", # "delete service lldp management-address '192.0.2.11'", # "set service lldp management-address '192.0.2.14'", # "set service lldp legacy-protocols edp", # "set service lldp legacy-protocols sonmp" # ] # # "after": { # "addresses": [ # "192.0.2.14" # ] # "legacy_protocols": [ # "cdp", # "edp", # "sonmp" # ] # "enable": true # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands|grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols edp # set service lldp legacy-protocols sonmp # set service lldp management-address '192.0.2.14' # Using deleted # # Before state # ------------- # vyos@vyos:~$ show configuration commands|grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols edp # set service lldp legacy-protocols sonmp # set service lldp management-address '192.0.2.14' # - name: Delete attributes of given lldp service (This won't delete the LLDP service itself) vyos.vyos.vyos_lldp_global: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "addresses": [ # "192.0.2.14" # ] # "legacy_protocols": [ # "cdp", # "edp", # "sonmp" # ] # "enable": true # } # # "commands": [ # "delete service lldp management-address", # "delete service lldp legacy-protocols" # ] # # "after": { # "enable": true # } # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp legacy-protocols 'cdp' # set service lldp management-address '192.0.2.17' # - name: Gather lldp global config with provided configurations vyos.vyos.vyos_lldp_global: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp legacy-protocols 'cdp' # set service lldp management-address '192.0.2.17' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lldp_global: config: addresses: - 192.0.2.17 enable: true legacy_protocols: - cdp state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set service lldp legacy-protocols 'cdp'", # "set service lldp", # "set service lldp management-address '192.0.2.17'" # ] # # Using parsed # # - name: Parse the provided commands to provide structured configuration vyos.vyos.vyos_lldp_global: running_config: "set service lldp legacy-protocols 'cdp' set service lldp legacy-protocols 'fdp' set service lldp management-address '192.0.2.11'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "addresses": [ # "192.0.2.11" # ] # "enable": true, # "legacy_protocols": [ # "cdp", # "fdp" # ] # } Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set service lldp legacy-protocols sonmp', "set service lldp management-address '192.0.2.14'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_lldp_interfaces_module.rst b/docs/vyos.vyos.vyos_lldp_interfaces_module.rst index 8ace2650..8786eeb5 100644 --- a/docs/vyos.vyos.vyos_lldp_interfaces_module.rst +++ b/docs/vyos.vyos.vyos_lldp_interfaces_module.rst @@ -1,764 +1,764 @@ .. _vyos.vyos.vyos_lldp_interfaces_module: ****************************** vyos.vyos.vyos_lldp_interfaces ****************************** **LLDP interfaces resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages attributes of lldp interfaces on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of LLDP interfaces configurations.
enable
boolean
    Choices:
  • no
  • yes ←
Disable LLDP on the interfaces.
location
dictionary
LLDP-MED location data.
coordinate_based
dictionary
Coordinate-based location.
altitude
integer
Altitude in meters.
datum
string
    Choices:
  • WGS84
  • NAD83
  • MLLW
Coordinate datum type.
latitude
string / required
Latitude.
longitude
string / required
Longitude.
elin
string
Emergency Call Service ELIN number (between 10-25 numbers).
name
string / required
Name of the LLDP interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • rendered
  • parsed
  • gathered
The state of the configuration after module completion.

Notes ----- .. note:: - - Tested against VyOS 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth1 location: elin: 0000000911 - name: eth2 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set service lldp interface eth1 location elin '0000000911'", # "set service lldp interface eth1", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2" # ] # # "after": { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # } # }, # "name": "eth1" # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # - name: >- Replace device configurations of listed LLDP interfaces with provided configurations vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 location: elin: 0000000911 - name: eth1 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "set service lldp interface eth2 'disable'", # "set service lldp interface eth2 location elin '0000000911'", # "delete service lldp interface eth1 location", # "set service lldp interface eth1 'disable'", # "set service lldp interface eth1 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth1 location coordinate-based altitude '2200'", # "set service lldp interface eth1 location coordinate-based datum 'WGS84'", # "set service lldp interface eth1 location coordinate-based longitude '222.267255W'" # ] # # "after": { # "location": { # "elin": "0000000911" # }, # "name": "eth2" # }, # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location elin '0000000911' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location elin '0000000911' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 location: elin: 0000000911 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "enable": false, # "elin": "0000000911", # "name": "eth2" # }, # { # "enable": false, # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "delete service lldp interface eth2 disable", # "set service lldp interface eth2 location elin 0000000911" # ] # # "after": [ # { # "location": { # "elin": 0000000911 # }, # "name": "eth2" # } # ] # # # After state # ------------ # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # Using deleted # # Before state # ------------- # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # - name: Delete LLDP interface attributes of given interfaces. vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "location": { # "elin": 0000000911 # }, # "name": "eth2" # } # ] # "commands": [ # "delete service lldp interface eth2" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep lldp # set service 'lldp' # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # - name: Gather listed lldp interfaces from running configuration vyos.vyos.vyos_lldp_interfaces: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] # # # After state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth1 location: elin: 0000000911 - name: eth2 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set service lldp interface eth1 location elin '0000000911'", # "set service lldp interface eth1", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2" # ] # Using parsed # # - name: Parsed the commands to provide structured configuration. vyos.vyos.vyos_lldp_interfaces: running_config: "set service lldp interface eth1 location elin '0000000911' set service lldp interface eth2 location coordinate-based altitude '2200' set service lldp interface eth2 location coordinate-based datum 'WGS84' set service lldp interface eth2 location coordinate-based latitude '33.524449N' set service lldp interface eth2 location coordinate-based longitude '222.267255W'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_logging_global_module.rst b/docs/vyos.vyos.vyos_logging_global_module.rst index 6d8550a6..71b77eb8 100644 --- a/docs/vyos.vyos.vyos_logging_global_module.rst +++ b/docs/vyos.vyos.vyos_logging_global_module.rst @@ -1,1670 +1,1670 @@ .. _vyos.vyos.vyos_logging_global_module: ***************************** vyos.vyos.vyos_logging_global ***************************** **Logging resource module** Version added: 2.4.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages the logging attributes of Vyos network devices Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A list containing dictionary of logging options
console
dictionary
logging to serial console
facilities
list / elements=dictionary
facility configurations for console
facility
string
    Choices:
  • all
  • auth
  • authpriv
  • cron
  • daemon
  • kern
  • lpr
  • mail
  • mark
  • news
  • protocols
  • security
  • syslog
  • user
  • uucp
  • local0
  • local1
  • local2
  • local3
  • local4
  • local5
  • local6
  • local7
Facility for logging
severity
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warning
  • notice
  • info
  • debug
  • all
logging level
state
string
    Choices:
  • enabled
  • disabled
enable or disable the command
files
list / elements=dictionary
logging to file
archive
dictionary
Log file size and rotation characteristics
file_num
integer
Number of saved files (default is 5)
size
integer
Size of log files (in kilobytes, default is 256)
state
string
    Choices:
  • enabled
  • disabled
enable or disable the command
facilities
list / elements=dictionary
facility configurations
facility
string
    Choices:
  • all
  • auth
  • authpriv
  • cron
  • daemon
  • kern
  • lpr
  • mail
  • mark
  • news
  • protocols
  • security
  • syslog
  • user
  • uucp
  • local0
  • local1
  • local2
  • local3
  • local4
  • local5
  • local6
  • local7
Facility for logging
severity
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warning
  • notice
  • info
  • debug
  • all
logging level
path
string
file name or path
global_params
dictionary
logging to serial console
archive
dictionary
Log file size and rotation characteristics
file_num
integer
Number of saved files (default is 5)
size
integer
Size of log files (in kilobytes, default is 256)
state
string
    Choices:
  • enabled
  • disabled
enable or disable the command
facilities
list / elements=dictionary
facility configurations
facility
string
    Choices:
  • all
  • auth
  • authpriv
  • cron
  • daemon
  • kern
  • lpr
  • mail
  • mark
  • news
  • protocols
  • security
  • syslog
  • user
  • uucp
  • local0
  • local1
  • local2
  • local3
  • local4
  • local5
  • local6
  • local7
Facility for logging
severity
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warning
  • notice
  • info
  • debug
  • all
logging level
marker_interval
integer
time interval how often a mark message is being sent in seconds (default is 1200)
preserve_fqdn
boolean
    Choices:
  • no
  • yes
uses FQDN for logging
state
string
    Choices:
  • enabled
  • disabled
enable or disable the command
hosts
list / elements=dictionary
logging to serial console
facilities
list / elements=dictionary
facility configurations for host
facility
string
    Choices:
  • all
  • auth
  • authpriv
  • cron
  • daemon
  • kern
  • lpr
  • mail
  • mark
  • news
  • protocols
  • security
  • syslog
  • user
  • uucp
  • local0
  • local1
  • local2
  • local3
  • local4
  • local5
  • local6
  • local7
Facility for logging
protocol
string
    Choices:
  • udp
  • tcp
syslog communication protocol. Version 1.3 and below.
severity
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warning
  • notice
  • info
  • debug
  • all
logging level
hostname
string
Remote host name or IP address
port
integer
Destination port (1-65535)
protocol
string
    Choices:
  • udp
  • tcp
syslog communication protocol. Version 1.4+
syslog
dictionary
logging syslog
state
string
    Choices:
  • enabled
  • disabled
enable or disable the command
users
list / elements=dictionary
logging to file
facilities
list / elements=dictionary
facility configurations
facility
string
    Choices:
  • all
  • auth
  • authpriv
  • cron
  • daemon
  • kern
  • lpr
  • mail
  • mark
  • news
  • protocols
  • security
  • syslog
  • user
  • uucp
  • local0
  • local1
  • local2
  • local3
  • local4
  • local5
  • local6
  • local7
Facility for logging
severity
string
    Choices:
  • emerg
  • alert
  • crit
  • err
  • warning
  • notice
  • info
  • debug
  • all
logging level
username
string
user login name
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration commands | grep syslog.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state the configuration should be left in
The states replaced and overridden have identical behaviour for this module.
Refer to examples for more details.

Notes ----- .. note:: - - Tested against vyos 1.3.8+ + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``network_cli``. - The Configuration defaults of the Vyos network devices are supposed to hinder idempotent behavior of plays Examples -------- .. code-block:: yaml # Using state: merged # Before state: # ------------- # vyos:~$show configuration commands | grep syslog - name: Apply the provided configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local7 severity: err files: - path: logFile archive: file_num: 2 facilities: - facility: local6 severity: emerg hosts: - hostname: 172.16.0.1 facilities: - facility: local7 severity: all - facility: all protocol: udp port: 223 users: - username: vyos facilities: - facility: local7 severity: debug global_params: archive: file_num: 2 size: 111 facilities: - facility: cron severity: debug marker_interval: 111 preserve_fqdn: true state: merged # Commands Fired: # --------------- # "commands": [ # "set system syslog console facility local7 level err", # "set system syslog file logFile archive file 2", # "set system syslog host 172.16.0.1 facility local7 level all", # "set system syslog file logFile facility local6 level emerg", # "set system syslog host 172.16.0.1 facility all protocol udp", # "set system syslog user vyos facility local7 level debug", # "set system syslog host 172.16.0.1 port 223", # "set system syslog global facility cron level debug", # "set system syslog global archive file 2", # "set system syslog global archive size 111", # "set system syslog global marker interval 111", # "set system syslog global preserve-fqdn" # ], # After state: # ------------ # vyos:~$ show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' # Using state: deleted # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' - name: delete the existing configuration vyos.vyos.vyos_logging_global: state: deleted # Commands Fired: # --------------- # "commands": [ # "delete system syslog" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # Using state: overridden # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' - name: Override the current configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: all - facility: local7 severity: err - facility: news severity: debug files: - path: logFileNew hosts: - hostname: 172.16.0.2 facilities: - facility: local5 severity: all global_params: archive: file_num: 10 state: overridden # Commands Fired: # --------------- # "commands": [ # "delete system syslog file logFile", # "delete system syslog global facility cron", # "delete system syslog host 172.16.0.1", # "delete system syslog user vyos", # "set system syslog console facility all", # "set system syslog console facility news level debug", # "set system syslog file logFileNew", # "set system syslog host 172.16.0.2 facility local5 level all", # "set system syslog global archive file 10", # "delete system syslog global archive size 111", # "delete system syslog global marker", # "delete system syslog global preserve-fqdn" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility all # set system syslog console facility local7 level 'err' # set system syslog console facility news level 'debug' # set system syslog file logFileNew # set system syslog global archive file '10' # set system syslog host 172.16.0.2 facility local5 level 'all' # Using state: replaced # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility all # set system syslog console facility local7 level 'err' # set system syslog console facility news level 'debug' # set system syslog file logFileNew # set system syslog global archive file '10' # set system syslog host 172.16.0.2 facility local5 level 'all' - name: Replace with the provided configuration register: result vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local6 users: - username: paul facilities: - facility: local7 severity: err state: replaced # Commands Fired: # --------------- # "commands": [ # "delete system syslog console facility all", # "delete system syslog console facility local7", # "delete system syslog console facility news", # "delete system syslog file logFileNew", # "delete system syslog global archive file 10", # "delete system syslog host 172.16.0.2", # "set system syslog console facility local6", # "set system syslog user paul facility local7 level err" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility local6 # set system syslog user paul facility local7 level 'err' # Using state: gathered - name: Gather logging config vyos.vyos.vyos_logging_global: state: gathered # Module Execution Result: # ------------------------ # "gathered": { # "console": { # "facilities": [ # { # "facility": "local6" # }, # { # "facility": "local7", # "severity": "err" # } # ] # }, # "files": [ # { # "archive": { # "file_num": 2 # }, # "facilities": [ # { # "facility": "local6", # "severity": "emerg" # } # ], # "path": "logFile" # } # ], # "global_params": { # "archive": { # "file_num": 2, # "size": 111 # }, # "facilities": [ # { # "facility": "cron", # "severity": "debug" # } # ], # "marker_interval": 111, # "preserve_fqdn": true # }, # "hosts": [ # { # "facilities": [ # { # "facility": "all", # "protocol": "udp" # }, # { # "facility": "local7", # "severity": "all" # } # ], # "hostname": "172.16.0.1", # "port": 223 # } # ], # "users": [ # { # "facilities": [ # { # "facility": "local7", # "severity": "err" # } # ], # "username": "paul" # }, # { # "facilities": [ # { # "facility": "local7", # "severity": "debug" # } # ], # "username": "vyos" # } # ] # }, # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility local6 # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user paul facility local7 level 'err' # set system syslog user vyos facility local7 level 'debug' # Using state: rendered - name: Render the provided configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local7 severity: err files: - path: logFile archive: file_num: 2 facilities: - facility: local6 severity: emerg hosts: - hostname: 172.16.0.1 facilities: - facility: local7 severity: all - facility: all protocol: udp port: 223 users: - username: vyos facilities: - facility: local7 severity: debug global_params: archive: file_num: 2 size: 111 facilities: - facility: cron severity: debug marker_interval: 111 preserve_fqdn: true state: rendered # Module Execution Result: # ------------------------ # "rendered": [ # "set system syslog console facility local7 level err", # "set system syslog file logFile facility local6 level emerg", # "set system syslog file logFile archive file 2", # "set system syslog host 172.16.0.1 facility local7 level all", # "set system syslog host 172.16.0.1 facility all protocol udp", # "set system syslog host 172.16.0.1 port 223", # "set system syslog user vyos facility local7 level debug", # "set system syslog global facility cron level debug", # "set system syslog global archive file 2", # "set system syslog global archive size 111", # "set system syslog global marker interval 111", # "set system syslog global preserve-fqdn" # ] # Using state: parsed # File: parsed.cfg # ---------------- # set system syslog console facility local6 # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user paul facility local7 level 'err' # set system syslog user vyos facility local7 level 'debug' - name: Parse the provided configuration vyos.vyos.vyos_logging_global: running_config: "{{ lookup('file', 'parsed_vyos.cfg') }}" state: parsed # Module Execution Result: # ------------------------ # "parsed": { # "console": { # "facilities": [ # { # "facility": "local6" # }, # { # "facility": "local7", # "severity": "err" # } # ] # }, # "files": [ # { # "archive": { # "file_num": 2 # }, # "facilities": [ # { # "facility": "local6", # "severity": "emerg" # } # ], # "path": "logFile" # } # ], # "global_params": { # "archive": { # "file_num": 2, # "size": 111 # }, # "facilities": [ # { # "facility": "cron", # "severity": "debug" # } # ], # "marker_interval": 111, # "preserve_fqdn": true # }, # "hosts": [ # { # "facilities": [ # { # "facility": "all", # "protocol": "udp" # }, # { # "facility": "local7", # "severity": "all" # } # ], # "hostname": "172.16.0.1", # "port": 223 # } # ], # "users": [ # { # "facilities": [ # { # "facility": "local7", # "severity": "err" # } # ], # "username": "paul" # }, # { # "facilities": [ # { # "facility": "local7", # "severity": "debug" # } # ], # "username": "vyos" # } # ] # } # } Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['set system syslog console facility local7 level err', 'set system syslog host 172.16.0.1 port 223', 'set system syslog global archive size 111']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['set system syslog host 172.16.0.1 port 223', 'set system syslog user vyos facility local7 level debug', 'set system syslog global facility cron level debu']


Status ------ Authors ~~~~~~~ - Sagar Paul (@KB-perByte) diff --git a/docs/vyos.vyos.vyos_ntp_global_module.rst b/docs/vyos.vyos.vyos_ntp_global_module.rst index 2975149d..da8a546e 100644 --- a/docs/vyos.vyos.vyos_ntp_global_module.rst +++ b/docs/vyos.vyos.vyos_ntp_global_module.rst @@ -1,973 +1,973 @@ .. _vyos.vyos.vyos_ntp_global_module: ************************* vyos.vyos.vyos_ntp_global ************************* **NTP global resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages ntp configuration on devices running Vyos Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
List of configurations for ntp module
allow_clients
list / elements=string
Network Time Protocol (NTP) server options
listen_addresses
list / elements=string
local IP addresses for service to listen on
servers
list / elements=dictionary
Network Time Protocol (NTP) server
options
list / elements=string
    Choices:
  • dynamic
  • noselect
  • pool
  • preempt
  • prefer
  • nts
  • ptp
  • interleave
server options for NTP
`pool` replaces `dynamic` in Vyos 1.3
`preempt` is only available in Vyos 1.3 and earlier
`nts` was added in Vyos 1.4
`ptp` and `interleave` were added in Vyos 1.5
server
string
server name or address for NTP
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration commands | grep ntp.
The states replaced and overridden have identical behaviour for this module.
The state parsed reads the configuration from show configuration commands | grep ntp option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • deleted
  • merged ←
  • overridden
  • replaced
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.

Notes ----- .. note:: - - Tested against vyos 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``network_cli``. - VyOS v.1.4+ uses chronyd, and path changes from `system` to `service` Examples -------- .. code-block:: yaml # # ------------------- # # 1. Using merged # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Replace the existing ntp config with the new config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.6.6.0/24 listen_addresses: - 10.1.3.1 servers: - server: 203.0.113.0 options: - prefer # Task output: # ------------- # "after": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # }, # "changed": true, # "commands": [ # "set service ntp allow-clients address 10.6.6.0/24", # "set service ntp listen-address 10.1.3.1", # "set service ntp server 203.0.113.0 prefer" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 2. Using replaced # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.4.9.0/24' # set service ntp allow-clients address '10.4.7.0/24' # set service ntp allow-clients address '10.1.2.0/24' # set service ntp allow-clients address '10.2.3.0/24' # set service ntp listen-address '10.1.9.16' # set service ntp listen-address '10.5.3.2' # set service ntp listen-address '10.7.9.21' # set service ntp listen-address '10.8.9.4' # set service ntp listen-address '10.4.5.1' # set service ntp server 10.3.6.5 noselect # set service ntp server 10.3.6.5 dynamic # set service ntp server 10.3.6.5 preempt # set service ntp server 10.3.6.5 prefer # set service ntp server server4 noselect # set service ntp server server4 dynamic # set service ntp server server5 # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Replace the existing ntp config with the new config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.6.6.0/24 listen_addresses: - 10.1.3.1 servers: - server: 203.0.113.0 options: - prefer state: replaced # # Task output: # # ------------- # "after": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.4.7.0/24", # "10.2.3.0/24", # "10.1.2.0/24", # "10.4.9.0/24" # ], # "listen_addresses": [ # "10.7.9.21", # "10.4.5.1", # "10.5.3.2", # "10.8.9.4", # "10.1.9.16" # ], # "servers": [ # { # "server": "10.3.6.5", # "options": [ # "noselect", # "dynamic", # "preempt", # "prefer" # ] # }, # { # "server": "server4", # "options": [ # "noselect", # "dynamic" # ] # }, # { # "server": "server5" # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients address 10.4.7.0/24", # "delete service ntp allow-clients address 10.2.3.0/24", # "delete service ntp allow-clients address 10.1.2.0/24", # "delete service ntp allow-clients address 10.4.9.0/24", # "delete service ntp listen-address 10.7.9.21", # "delete service ntp listen-address 10.4.5.1", # "delete service ntp listen-address 10.5.3.2", # "delete service ntp listen-address 10.8.9.4", # "delete service ntp listen-address 10.1.9.16", # "delete service ntp server 10.3.6.5", # "delete service ntp server server4", # "delete service ntp server server5", # "set service ntp allow-clients address 10.6.6.0/24", # "set service ntp listen-address 10.1.3.1", # "set service ntp server 203.0.113.0 prefer" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 3. Using overridden # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Override ntp config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.3.3.0/24 listen_addresses: - 10.7.8.1 servers: - server: server1 options: - dynamic - prefer - server: server2 options: - noselect - preempt - server: serv state: overridden # # Task output: # # ------------- # "after": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients address 10.6.6.0/24", # "delete service ntp listen-address 10.1.3.1", # "delete service ntp server ser", # "set service ntp allow-clients address 10.3.3.0/24", # "set service ntp listen-address 10.7.8.1", # "set service ntp server server1 dynamic", # "set service ntp server server1 prefer", # "set service ntp server server2 noselect", # "set service ntp server server2 preempt", # "set service ntp server serv" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # 4. Using gathered # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Gather ntp config vyos.vyos.vyos_ntp_global: state: gathered # # Task output: # # ------------- # "gathered": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # } # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 5. Using deleted # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Delete ntp config vyos.vyos.vyos_ntp_global: state: deleted # # Task output: # # ------------- # "after": { # "servers": [ # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients", # "delete service ntp listen-address", # "delete service ntp server serv", # "delete service ntp server server1", # "delete service ntp server server2" # # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 6. Using rendered # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Render ntp config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.7.7.0/24 - 10.8.8.0/24 listen_addresses: - 10.7.9.1 servers: - server: server7 - server: server45 options: - noselect - prefer - pool - server: time1.vyos.net - server: time2.vyos.net - server: time3.vyos.net state: rendered # # Task output: # # ------------- # "rendered": [ # "set service ntp allow-clients address 10.7.7.0/24", # "set service ntp allow-clients address 10.8.8.0/24", # "set service ntp listen-address 10.7.9.1", # "set service ntp server server7", # "set service ntp server server45 noselect", # "set service ntp server server45 prefer", # "set service ntp server server45 pool", # "set service ntp server time1.vyos.net", # "set service ntp server time2.vyos.net", # "set service ntp server time3.vyos.net" # ] # # ------------------- # # 7. Using parsed # # ------------------- # # sample_config.cfg: # # ------------- # "set service ntp allow-clients address 10.7.7.0/24", # "set service ntp listen-address 10.7.9.1", # "set service ntp server server45 noselect", # "set service ntp allow-clients addres 10.8.6.0/24", # "set service ntp listen-address 10.5.4.1", # "set service ntp server server45 dynamic", # "set service ntp server time1.vyos.net", # "set service ntp server time2.vyos.net", # "set service ntp server time3.vyos.net" # Task: # ------------- - name: Parse externally provided ntp configuration vyos.vyos.vyos_ntp_global: running_config: "{{ lookup('file', './sample_config.cfg') }}" state: parsed # # Task output: # # ------------- # parsed = { # "allow_clients": [ # "10.7.7.0/24", # "10.8.6.0/24 # ], # "listen_addresses": [ # "10.5.4.1", # "10.7.9.1" # ], # "servers": [ # { # "server": "server45", # "options": [ # "noselect", # "dynamic" # # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # # ] # } Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['set system ntp server server1 dynamic', 'set system ntp server server1 prefer', 'set system ntp server server2 noselect', 'set system ntp server server2 preempt', 'set system ntp server server_add preempt']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['set system ntp server server1 dynamic', 'set system ntp server server1 prefer', 'set system ntp server server2 noselect', 'set system ntp server server2 preempt', 'set system ntp server server_add preempt']


Status ------ Authors ~~~~~~~ - Varshitha Yataluru (@YVarshitha) diff --git a/docs/vyos.vyos.vyos_ospf_interfaces_module.rst b/docs/vyos.vyos.vyos_ospf_interfaces_module.rst index a74f53ca..9cf292a9 100644 --- a/docs/vyos.vyos.vyos_ospf_interfaces_module.rst +++ b/docs/vyos.vyos.vyos_ospf_interfaces_module.rst @@ -1,1319 +1,1320 @@ .. _vyos.vyos.vyos_ospf_interfaces_module: ****************************** vyos.vyos.vyos_ospf_interfaces ****************************** **OSPF Interfaces Resource Module.** Version added: 1.2.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages OSPF configuration of interfaces on devices running VYOS. +- The provided examples of commands are valid for VyOS 1.4+ Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of OSPF configuration for interfaces.
address_family
list / elements=dictionary
OSPF settings on the interfaces in address-family context.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Address Family Identifier (AFI) for OSPF settings on the interfaces.
authentication
dictionary
Authentication settings on the interface.
md5_key
dictionary
md5 parameters.
key
string
md5 key.
key_id
integer
key id.
plaintext_password
string
Plain Text password.
bandwidth
integer
Bandwidth of interface (kilobits/sec)
cost
integer
metric associated with interface.
dead_interval
integer
Time interval to detect a dead router.
hello_interval
integer
Timer interval between transmission of hello packets.
ifmtu
integer
interface MTU.
instance
string
Instance ID.
mtu_ignore
boolean
    Choices:
  • no
  • yes
if True, Disable MTU check for Database Description packets.
network
string
Interface type.
passive
boolean
    Choices:
  • no
  • yes
If True, disables forming adjacency.
priority
integer
Interface priority.
retransmit_interval
integer
LSA retransmission interval.
transmit_delay
integer
LSA transmission delay.
name
string
Name/Identifier of the interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration commands | match "set interfaces".
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state the configuration should be left in.

Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # @vyos:~$ show configuration commands | match "ospf" - name: Merge provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: true state: merged # After State: # -------------- # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' # "after": [ # " # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ - # "set interfaces ethernet eth1 ip ospf transmit-delay 50", - # "set interfaces ethernet eth1 ip ospf priority 26", - # "set interfaces ethernet eth1 ip ospf network point-to-point", - # "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", - # "set interfaces bonding bond2 ip ospf transmit-delay 45", - # "set interfaces bonding bond2 ip ospf bandwidth 70", - # "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", - # "set interfaces bonding bond2 ipv6 ospfv3 passive" + # "set protocols ospf interface eth1 transmit-delay 50", + # "set protocols ospf interface eth1 priority 26", + # "set protocols ospf interface eth1 network point-to-point", + # "set protocols ospfv3 interface eth1 dead-interval 39", + # "set protocols ospf interface bond2 transmit-delay 45", + # "set protocols ospf interface bond2 bandwidth 70", + # "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key 1111111111232345", + # "set protocols ospfv3 interface bond2 passive" # ], # Using replaced: # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' - name: Replace provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 - afi: "ipv6" passive: true state: replaced # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf cost '100' - # set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 cost '100' + # set protocols ospfv3 interface eth1 ifmtu '33' # vyos@vyos:~$ # Module Execution # ---------------- # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ - # "set interfaces ethernet eth1 ip ospf cost 100", - # "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33", - # "delete interfaces ethernet eth1 ip ospf network point-to-point", - # "delete interfaces ethernet eth1 ip ospf priority 26", - # "delete interfaces ethernet eth1 ip ospf transmit-delay 50", - # "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", - # "delete interfaces bonding bond2 ip ospf authentication", - # "delete interfaces bonding bond2 ip ospf bandwidth 70" + # "set protocols ospf interface eth1 cost 100", + # "set protocols ospfv3 interface eth1 ifmtu 33", + # "delete protocols ospf interface eth1 network point-to-point", + # "delete protocols ospf interface eth1 priority 26", + # "delete protocols ospf interface eth1 transmit-delay 50", + # "delete protocols ospfv3 interface eth1 dead-interval 39", + # "delete protocols ospf interface bond2 authentication", + # "delete protocols ospf interface bond2 bandwidth 70" # ], # # Using Overridden: # ----------------- # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf cost '100' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' - # set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 cost '100' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' + # set protocols ospfv3 interface eth1 ifmtu '33' # vyos@vyos:~$ - name: Override device configuration with provided configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 passive: true state: overridden # After State: # ----------- # 200~vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces ethernet eth0 ip ospf cost '100' - # set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' - # set interfaces ethernet eth0 ipv6 ospfv3 'passive' + # set protocols ospf interface eth0 cost '100' + # set protocols ospfv3 interface eth0 ifmtu '33' + # set protocols ospfv3 interface eth0 'passive' # vyos@vyos:~$ # # # "after": [ # { # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100, # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39, # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ - # "delete interfaces bonding bond2 ip ospf", - # "delete interfaces bonding bond2 ipv6 ospfv3", - # "delete interfaces ethernet eth1 ip ospf", - # "delete interfaces ethernet eth1 ipv6 ospfv3", - # "set interfaces ethernet eth0 ip ospf cost 100", - # "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33", - # "set interfaces ethernet eth0 ipv6 ospfv3 passive" + # "delete protocols ospf interface bond2", + # "delete protocols ospfv3 interface bond2", + # "delete protocols ospf interface eth1", + # "delete protocols ospfv3 interface eth1", + # "set protocols ospf interface eth0 cost 100", + # "set protocols ospfv3 interface eth0 ifmtu 33", + # "set protocols ospfv3 interface eth0 passive" # ], # # Using deleted: # ------------- # before state: # ------------- # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth0 ip ospf cost '100' - # set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' - # set interfaces ethernet eth0 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth0 cost '100' + # set protocols ospfv3 interface eth0 ifmtu '33' + # set protocols ospfv3 interface eth0 'passive' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ - name: Delete device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" state: deleted # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ # # # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ - # "delete interfaces ethernet eth0 ip ospf", - # "delete interfaces ethernet eth0 ipv6 ospfv3" + # "delete protocols ospf interface eth0", + # "delete protocols ospfv3 interface eth0" # ], # # Using parsed: # parsed.cfg: - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth0 ip ospf cost '50' - # set interfaces ethernet eth0 ip ospf priority '26' - # set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33' - # set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth0 cost '50' + # set protocols ospf interface eth0 priority '26' + # set protocols ospfv3 interface eth0 instance-id '33' + # set protocols ospfv3 interface eth0 'mtu-ignore' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' # - name: parse configs vyos.vyos.vyos_ospf_interfaces: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed # Module Execution: # ---------------- # "parsed": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 50, # "priority": 26 # }, # { # "afi": "ipv6", # "instance": "33", # "mtu_ignore": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # } # ] # Using rendered: # -------------- - name: Render vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: true state: rendered # Module Execution: # ---------------- # "rendered": [ - # "set interfaces ethernet eth1 ip ospf transmit-delay 50", - # "set interfaces ethernet eth1 ip ospf priority 26", - # "set interfaces ethernet eth1 ip ospf network point-to-point", - # "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", - # "set interfaces bonding bond2 ip ospf transmit-delay 45", - # "set interfaces bonding bond2 ip ospf bandwidth 70", - # "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", - # "set interfaces bonding bond2 ipv6 ospfv3 passive" + # "set protocols ospf interface eth1 transmit-delay 50", + # "set protocols ospf interface eth1 priority 26", + # "set protocols ospf interface eth1 network point-to-point", + # "set protocols ospfv3 interface eth1 dead-interval 39", + # "set protocols ospf interface bond2 transmit-delay 45", + # "set protocols ospf interface bond2 bandwidth 70", + # "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key 1111111111232345", + # "set protocols ospfv3 interface bond2 passive" # ] # # Using Gathered: # -------------- # Native Config: # vyos@vyos:~$ show configuration commands | match "ospf" - # set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' - # set interfaces bonding bond2 ip ospf bandwidth '70' - # set interfaces bonding bond2 ip ospf transmit-delay '45' - # set interfaces bonding bond2 ipv6 ospfv3 'passive' - # set interfaces ethernet eth1 ip ospf network 'point-to-point' - # set interfaces ethernet eth1 ip ospf priority '26' - # set interfaces ethernet eth1 ip ospf transmit-delay '50' - # set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' + # set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' + # set protocols ospf interface bond2 bandwidth '70' + # set protocols ospf interface bond2 transmit-delay '45' + # set protocols ospfv3 interface bond2 'passive' + # set protocols ospf interface eth1 network 'point-to-point' + # set protocols ospf interface eth1 priority '26' + # set protocols ospf interface eth1 transmit-delay '50' + # set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ - name: gather configs vyos.vyos.vyos_ospf_interfaces: state: gathered # Module Execution: # ----------------- # "gathered": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
-
["set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'", "set interfaces bonding bond2 ip ospf bandwidth '70'", "set interfaces bonding bond2 ip ospf transmit-delay '45'"]
+
["set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345'", "set protocols ospf interface bond2 bandwidth '70'", "set protocols ospf interface bond2 transmit-delay '45'"]
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
-
["set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'", "set interfaces bonding bond2 ip ospf bandwidth '70'", "set interfaces bonding bond2 ip ospf transmit-delay '45'"]
+
["set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345'", "set protocols ospf interface bond2 bandwidth '70'", "set protocols ospf interface bond2 transmit-delay '45'"]


Status ------ Authors ~~~~~~~ - Gomathi Selvi Srinivasan (@GomathiselviS) diff --git a/docs/vyos.vyos.vyos_ospfv2_module.rst b/docs/vyos.vyos.vyos_ospfv2_module.rst index 38e7e5ee..be060285 100644 --- a/docs/vyos.vyos.vyos_ospfv2_module.rst +++ b/docs/vyos.vyos.vyos_ospfv2_module.rst @@ -1,3125 +1,3126 @@ .. _vyos.vyos.vyos_ospfv2_module: ********************* vyos.vyos.vyos_ospfv2 ********************* **OSPFv2 resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This resource module configures and manages attributes of OSPFv2 routes on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A provided OSPFv2 route configuration.
areas
list / elements=dictionary
OSPFv2 area.
area_id
string
OSPFv2 area identity.
area_type
dictionary
Area type.
normal
boolean
    Choices:
  • no
  • yes
Normal OSPFv2 area.
nssa
dictionary
NSSA OSPFv2 area.
default_cost
integer
Summary-default cost of NSSA area.
no_summary
boolean
    Choices:
  • no
  • yes
Do not inject inter-area routes into stub.
set
boolean
    Choices:
  • no
  • yes
Enabling NSSA.
translate
string
    Choices:
  • always
  • candidate
  • never
NSSA-ABR.
stub
dictionary
Stub OSPFv2 area.
default_cost
integer
Summary-default cost of stub area.
no_summary
boolean
    Choices:
  • no
  • yes
Do not inject inter-area routes into stub.
set
boolean
    Choices:
  • no
  • yes
Enabling stub.
authentication
string
    Choices:
  • plaintext-password
  • md5
OSPFv2 area authentication type.
network
list / elements=dictionary
OSPFv2 network.
address
string / required
OSPFv2 IPv4 network address.
range
list / elements=dictionary
Summarize routes matching prefix (border routers only).
address
string
border router IPv4 address.
cost
integer
Metric for this range.
not_advertise
boolean
    Choices:
  • no
  • yes
Don't advertise this range.
substitute
string
Announce area range (IPv4 address) as another prefix.
shortcut
string
    Choices:
  • default
  • disable
  • enable
Area's shortcut mode.
virtual_link
list / elements=dictionary
Virtual link address.
address
string
virtual link address.
authentication
dictionary
OSPFv2 area authentication type.
md5
list / elements=dictionary
MD5 key id based authentication.
key_id
integer
MD5 key id.
md5_key
string
MD5 key.
plaintext_password
string
Plain text password.
dead_interval
integer
Interval after which a neighbor is declared dead.
hello_interval
integer
Interval between hello packets.
retransmit_interval
integer
Interval between retransmitting lost link state advertisements.
transmit_delay
integer
Link state transmit delay.
auto_cost
dictionary
Calculate OSPFv2 interface cost according to bandwidth.
reference_bandwidth
integer
Reference bandwidth cost in Mbits/sec.
default_information
dictionary
Control distribution of default information.
originate
dictionary
Distribute a default route.
always
boolean
    Choices:
  • no
  • yes
Always advertise default route.
metric
integer
OSPFv2 default metric.
metric_type
integer
OSPFv2 Metric types for default routes.
route_map
string
Route map references.
default_metric
integer
Metric of redistributed routes
distance
dictionary
Administrative distance.
global
integer
Global OSPFv2 administrative distance.
ospf
dictionary
OSPFv2 administrative distance.
external
integer
Distance for external routes.
inter_area
integer
Distance for inter-area routes.
intra_area
integer
Distance for intra-area routes.
log_adjacency_changes
string
    Choices:
  • detail
Log changes in adjacency state.
max_metric
dictionary
OSPFv2 maximum/infinite-distance metric.
router_lsa
dictionary
Advertise own Router-LSA with infinite distance (stub router).
administrative
boolean
    Choices:
  • no
  • yes
Administratively apply, for an indefinite period.
on_shutdown
integer
Time to advertise self as stub-router.
on_startup
integer
Time to advertise self as stub-router
mpls_te
dictionary
MultiProtocol Label Switching-Traffic Engineering (MPLS-TE) parameters.
enabled
boolean
    Choices:
  • no
  • yes
Enable MPLS-TE functionality.
router_address
string
Stable IP address of the advertising router.
neighbor
list / elements=dictionary
Neighbor IP address.
neighbor_id
string
Identity (number/IP address) of neighbor.
poll_interval
integer
Seconds between dead neighbor polling interval.
priority
integer
Neighbor priority.
parameters
dictionary
OSPFv2 specific parameters.
abr_type
string
    Choices:
  • cisco
  • ibm
  • shortcut
  • standard
OSPFv2 ABR Type.
opaque_lsa
boolean
    Choices:
  • no
  • yes
Enable the Opaque-LSA capability (rfc2370).
rfc1583_compatibility
boolean
    Choices:
  • no
  • yes
Enable rfc1583 criteria for handling AS external routes.
router_id
string
Override the default router identifier.
passive_interface
list / elements=string
Suppress routing updates on an interface.
passive_interface_exclude
list / elements=string
Interface to exclude when using passive-interface default.
redistribute
list / elements=dictionary
Redistribute information from another routing protocol.
metric
integer
Metric for redistribution routes.
metric_type
integer
OSPFv2 Metric types.
route_map
string
Route map references.
route_type
string
    Choices:
  • bgp
  • connected
  • kernel
  • rip
  • static
Route type to redistribute.
route_map
list / elements=string
Filter routes installed in local route map.
timers
dictionary
Adjust routing timers.
refresh
dictionary
Adjust refresh parameters.
timers
integer
refresh timer.
throttle
dictionary
Throttling adaptive timers.
spf
dictionary
OSPFv2 SPF timers.
delay
integer
Delay (msec) from first change received till SPF calculation.
initial_holdtime
integer
Initial hold time(msec) between consecutive SPF calculations.
max_holdtime
integer
maximum hold time (sec).
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep ospf.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • parsed
  • gathered
  • rendered
The state the configuration should be left in.

Notes ----- .. note:: - - Tested against VyOS 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 + - The provided examples of commands are valid for VyOS 1.4+ - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - eth1 - eth2 parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: 3 area_type: nssa: set: true - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", - # "set protocols ospf passive-interface eth1", - # "set protocols ospf passive-interface eth2", + # "set protocols ospf interface 'eth1' passive", + # "set protocols ospf interface 'eth2' passive", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration to update existing running configuration vyos.vyos.vyos_ospfv2: config: areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '3' area_type: nssa: set: false - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospf area 4 area-type stub", # "set protocols ospf area 4 network 192.0.22.0/24" # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # }, # "network": [ # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using replaced # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Replace ospfv2 routes attributes configuration. vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.22.22 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - 'eth1' parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: "plaintext-password" shortcut: 'enable' - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.12.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 range: - address: 1.1.2.0/24 cost: 10 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ - # "delete protocols ospf passive-interface eth2", + # "delete protocols ospf interface 'eth2' passive", # "delete protocols ospf area 3", # "delete protocols ospf area 4 range 192.0.3.0/24 cost", # "delete protocols ospf area 4 range 192.0.3.0/24", # "delete protocols ospf area 4 range 192.0.4.0/24 cost", # "delete protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf mpls-te router-address '192.0.22.22'", # "set protocols ospf area 4 range 1.1.2.0/24 cost 10", # "set protocols ospf area 4 range 1.1.2.0/24", # "set protocols ospf area 4 network 192.0.12.0/24", # "set protocols ospf area 4 network 192.0.22.0/24", # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.12.0/24" # }, # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "1.1.2.0/24", # "cost": 10 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.22.22" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.12.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 1.1.2.0/24 cost '10' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.22.22' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' + # set protocols ospf interface 'eth1' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - 'eth1' - 'eth2' parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: "plaintext-password" shortcut: enable - area_id: 3 area_type: nssa: set: true - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", - # "set protocols ospf passive-interface eth1", - # "set protocols ospf passive-interface eth2", + # "set protocols ospf interface 'eth1' passive", + # "set protocols ospf interface 'eth2' passive", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # Using parsed # # - name: Parse the commands for provided configuration vyos.vyos.vyos_ospfv2: running_config: | set protocols ospf area 2 area-type 'normal' set protocols ospf area 2 authentication 'plaintext-password' set protocols ospf area 2 shortcut 'enable' set protocols ospf area 3 area-type 'nssa' set protocols ospf area 4 area-type stub default-cost '20' set protocols ospf area 4 network '192.0.2.0/24' set protocols ospf area 4 range 192.0.3.0/24 cost '10' set protocols ospf area 4 range 192.0.4.0/24 cost '12' set protocols ospf auto-cost reference-bandwidth '2' set protocols ospf default-information originate 'always' set protocols ospf default-information originate metric '10' set protocols ospf default-information originate metric-type '2' set protocols ospf default-information originate route-map 'ingress' set protocols ospf log-adjacency-changes 'detail' set protocols ospf max-metric router-lsa 'administrative' set protocols ospf max-metric router-lsa on-shutdown '10' set protocols ospf max-metric router-lsa on-startup '10' set protocols ospf mpls-te 'enable' set protocols ospf mpls-te router-address '192.0.11.11' set protocols ospf neighbor 192.0.11.12 poll-interval '10' set protocols ospf neighbor 192.0.11.12 priority '2' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters 'opaque-lsa' set protocols ospf parameters 'rfc1583-compatibility' set protocols ospf parameters router-id '192.0.1.1' - set protocols ospf passive-interface 'eth1' - set protocols ospf passive-interface 'eth2' + set protocols ospf interface 'eth1' passive + set protocols ospf interface 'eth2' passive set protocols ospf redistribute bgp metric '10' set protocols ospf redistribute bgp metric-type '2' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # } # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Gather ospfv2 routes config with provided configurations vyos.vyos.vyos_ospfv2: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' - # set protocols ospf passive-interface 'eth1' - # set protocols ospf passive-interface 'eth2' + # set protocols ospf interface 'eth1' passive + # set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Delete attributes of ospfv2 routes. vyos.vyos.vyos_ospfv2: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # "commands": [ # "delete protocols ospf" # ] # # "after": {} # After state # ------------ # vyos@192# run show configuration commands | grep ospf Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
-
['set protocols ospf parameters router-id 192.0.1.1', "set protocols ospf passive-interface 'eth1'"]
+
['set protocols ospf parameters router-id 192.0.1.1', "set protocols ospf interface 'eth1' passive"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_ospfv3_module.rst b/docs/vyos.vyos.vyos_ospfv3_module.rst index 6957b77d..a1d317ae 100644 --- a/docs/vyos.vyos.vyos_ospfv3_module.rst +++ b/docs/vyos.vyos.vyos_ospfv3_module.rst @@ -1,957 +1,957 @@ .. _vyos.vyos.vyos_ospfv3_module: ********************* vyos.vyos.vyos_ospfv3 ********************* **OSPFv3 resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This resource module configures and manages attributes of OSPFv3 routes on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A provided OSPFv3 route configuration.
areas
list / elements=dictionary
OSPFv3 area.
area_id
string
OSPFv3 Area name/identity.
export_list
string
Name of export-list.
import_list
string
Name of import-list.
interface
list / elements=dictionary
Enable OSPVv3 on an interface for this area.

aliases: interfaces
name
string
Interface name.
range
list / elements=dictionary
Summarize routes matching prefix (border routers only).
address
string
border router IPv4 address.
advertise
boolean
    Choices:
  • no
  • yes
Advertise this range.
not_advertise
boolean
    Choices:
  • no
  • yes
Don't advertise this range.
parameters
dictionary
OSPFv3 specific parameters.
router_id
string
Override the default router identifier.
redistribute
list / elements=dictionary
Redistribute information from another routing protocol.
route_map
string
Route map references.
route_type
string
    Choices:
  • bgp
  • connected
  • kernel
  • ripng
  • static
Route type to redistribute.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep ospfv3.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • parsed
  • gathered
  • rendered
The state the configuration should be left in.

Notes ----- .. note:: - - Tested against VyOS 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospfv3 # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db20::/32' - address: '2001:db30::/32' - area_id: 3 range: - address: '2001:db40::/32' state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set protocols ospfv3 redistribute bgp", # "set protocols ospfv3 parameters router-id '192.0.2.10'", # "set protocols ospfv3 area 2 range 2001:db10::/32", # "set protocols ospfv3 area 2 range 2001:db20::/32", # "set protocols ospfv3 area 2 range 2001:db30::/32", # "set protocols ospfv3 area '2'", # "set protocols ospfv3 area 2 export-list export1", # "set protocols ospfv3 area 2 import-list import1", # "set protocols ospfv3 area '3'", # "set protocols ospfv3 area 3 range 2001:db40::/32" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using replaced # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Replace ospfv3 routes attributes configuration. vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db30::/32' - address: '2001:db50::/32' - area_id: 4 range: - address: '2001:db60::/32' state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospfv3 area 2 range 2001:db20::/32", # "delete protocols ospfv3 area 3", # "set protocols ospfv3 area 2 range 2001:db50::/32", # "set protocols ospfv3 area '4'", # "set protocols ospfv3 area 4 range 2001:db60::/32" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db30::/32" # }, # { # "address": "2001:db50::/32" # } # ] # }, # { # "area_id": "4", # "range": [ # { # "address": "2001:db60::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 2 range '2001:db50::/32' # set protocols ospfv3 area 4 range '2001:db60::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db20::/32' - address: '2001:db30::/32' - area_id: 3 range: - address: '2001:db40::/32' state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # [ # "set protocols ospfv3 redistribute bgp", # "set protocols ospfv3 parameters router-id '192.0.2.10'", # "set protocols ospfv3 area 2 range 2001:db10::/32", # "set protocols ospfv3 area 2 range 2001:db20::/32", # "set protocols ospfv3 area 2 range 2001:db30::/32", # "set protocols ospfv3 area '2'", # "set protocols ospfv3 area 2 export-list export1", # "set protocols ospfv3 area 2 import-list import1", # "set protocols ospfv3 area '3'", # "set protocols ospfv3 area 3 range 2001:db40::/32" # ] # Using parsed # # - name: Parse the commands from the provided configuration vyos.vyos.vyos_ospfv3: running_config: | set protocols ospfv3 area 2 export-list 'export1' set protocols ospfv3 area 2 import-list 'import1' set protocols ospfv3 area 2 range '2001:db10::/32' set protocols ospfv3 area 2 range '2001:db20::/32' set protocols ospfv3 area 2 range '2001:db30::/32' set protocols ospfv3 area 3 range '2001:db40::/32' set protocols ospfv3 parameters router-id '192.0.2.10' set protocols ospfv3 redistribute 'bgp' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Gather ospfv3 routes config with provided configurations vyos.vyos.vyos_ospfv3: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Delete attributes of ospfv3 routes. vyos.vyos.vyos_ospfv3: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # "commands": [ # "delete protocols ospfv3" # ] # # "after": {} # After state # ------------ # vyos@192# run show configuration commands | grep ospfv3 Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
["set protocols ospfv3 parameters router-id '192.0.2.10'", "set protocols ospfv3 redistribute 'bgp'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_ping_module.rst b/docs/vyos.vyos.vyos_ping_module.rst index e18552b8..06d63238 100644 --- a/docs/vyos.vyos.vyos_ping_module.rst +++ b/docs/vyos.vyos.vyos_ping_module.rst @@ -1,306 +1,306 @@ .. _vyos.vyos.vyos_ping_module: ******************* vyos.vyos.vyos_ping ******************* **Tests reachability using ping from VyOS network devices** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - Tests reachability using ping from a VyOS device to a remote destination. -- Tested against VyOS 1.1.8 (helium) +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - For a general purpose network module, see the :ref:`ansible.netcommon.net_ping ` module. - For Windows targets, use the :ref:`ansible.windows.win_ping ` module instead. - For targets running Python, use the :ref:`ansible.builtin.ping ` module instead. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
count
integer
Default:
5
Number of packets to send to check reachability.
dest
string / required
The IP Address or hostname (resolvable by the device) of the remote node.
interval
integer
Determines the interval (in seconds) between consecutive pings.
size
integer
Determines the size (in bytes) of the ping packet(s).
source
string
The source interface or IP Address to use while sending the ping packet(s).
state
string
    Choices:
  • absent
  • present ←
Determines if the expected result is success or fail.
ttl
integer
The time-to-live value for the ICMP packet(s).

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - For a general purpose network module, see the :ref:`ansible.netcommon.net_ping ` module. - For Windows targets, use the :ref:`ansible.windows.win_ping ` module instead. - For targets running Python, use the :ref:`ansible.builtin.ping ` module instead. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: Test reachability to 10.10.10.10 vyos.vyos.vyos_ping: dest: 10.10.10.10 - name: Test reachability to 10.20.20.20 using source and ttl set vyos.vyos.vyos_ping: dest: 10.20.20.20 source: eth0 ttl: 128 - name: Test reachability to 10.30.30.30 using interval vyos.vyos.vyos_ping: dest: 10.30.30.30 interval: 3 state: absent - name: Test reachability to 10.40.40.40 setting count and source vyos.vyos.vyos_ping: dest: 10.40.40.40 source: eth1 count: 20 size: 512 Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
commands
list
always
List of commands sent.

Sample:
['ping 10.8.38.44 count 10 interface eth0 ttl 128']
packet_loss
string
always
Percentage of packets lost.

Sample:
0%
packets_rx
integer
always
Packets successfully received.

Sample:
20
packets_tx
integer
always
Packets successfully transmitted.

Sample:
20
rtt
dictionary
when ping succeeds
The round trip time (RTT) stats.

Sample:
{'avg': 2, 'max': 8, 'min': 1, 'mdev': 24}


Status ------ Authors ~~~~~~~ - Nilashish Chakraborty (@NilashishC) diff --git a/docs/vyos.vyos.vyos_prefix_lists_module.rst b/docs/vyos.vyos.vyos_prefix_lists_module.rst index cd74a602..6c8bcee9 100644 --- a/docs/vyos.vyos.vyos_prefix_lists_module.rst +++ b/docs/vyos.vyos.vyos_prefix_lists_module.rst @@ -1,1591 +1,1591 @@ .. _vyos.vyos.vyos_prefix_lists_module: *************************** vyos.vyos.vyos_prefix_lists *************************** **Prefix-Lists resource module for VyOS** Version added: 2.4.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages prefix-lists configuration on devices running VyOS Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of prefix-list options
afi
string / required
    Choices:
  • ipv4
  • ipv6
The Address Family Indicator (AFI) for the prefix-lists
prefix_lists
list / elements=dictionary
A list of prefix-list configurations
description
string
A brief text description for the prefix-list
entries
list / elements=dictionary
Rule configurations for the prefix-list
action
string
    Choices:
  • permit
  • deny
The action to be taken for packets matching a prefix list rule
description
string
A brief text description for the prefix list rule
ge
integer
Minimum prefix length to be matched
le
integer
Maximum prefix list length to be matched
prefix
string
IPv4 or IPv6 prefix in A.B.C.D/LEN or A:B::C:D/LEN format
sequence
integer / required
A numeric identifier for the rule
name
string / required
The name of a defined prefix-list
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep prefix-list.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state the configuration should be left in

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium) + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``network_cli`` Examples -------- .. code-block:: yaml # # ------------------- # # 1. Using merged # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # vyos@vyos:~$ # # Task # # ------------- # - name: Merge the provided configuration with the existing running configuration # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv4" # prefix_lists: # - name: "AnsibleIPv4PrefixList" # description: "PL configured by ansible" # entries: # - sequence: 2 # description: "Rule 2 given by ansible" # action: "permit" # prefix: "92.168.10.0/26" # le: 32 # - sequence: 3 # description: "Rule 3" # action: "deny" # prefix: "72.168.2.0/24" # ge: 26 # - afi: "ipv6" # prefix_lists: # - name: "AllowIPv6Prefix" # description: "Configured by ansible for allowing IPv6 networks" # entries: # - sequence: 5 # description: "Permit rule" # action: "permit" # prefix: "2001:db8:8000::/35" # le: 37 # - name: DenyIPv6Prefix # description: "Configured by ansible for disallowing IPv6 networks" # entries: # - sequence: 8 # action: deny # prefix: "2001:db8:2000::/35" # le: 37 # state: merged # # Task output: # # ------------- # "after": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "before": [], # "changed": true, # "commands": [ # "set policy prefix-list AnsibleIPv4PrefixList", # "set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24'", # "set policy prefix-list6 AllowIPv6Prefix", # "set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks'", # "set policy prefix-list6 AllowIPv6Prefix rule 5", # "set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 le '37'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35'", # "set policy prefix-list6 DenyIPv6Prefix", # "set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks'", # "set policy prefix-list6 DenyIPv6Prefix rule 8", # "set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny'", # "set policy prefix-list6 DenyIPv6Prefix rule 8 le '37'", # "set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35'" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # ------------------- # # 2. Using replaced # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # Task: # # ------------- # - name: Replace prefix-lists configurations of listed prefix-lists with provided configurations # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv4" # prefix_lists: # - name: "AnsibleIPv4PrefixList" # description: "Configuration replaced by ansible" # entries: # - sequence: 3 # description: "Rule 3 replaced by ansible" # action: "permit" # prefix: "82.168.2.0/24" # ge: 26 # state: replaced # # Task output: # # ------------- # "after": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "Configuration replaced by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 3 replaced by ansible", # "ge": 26, # "sequence": 3, # "prefix": "82.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "before": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "changed": true, # "commands": [ # "set policy prefix-list AnsibleIPv4PrefixList description 'Configuration replaced by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'permit'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3 replaced by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '82.168.2.0/24'", # "delete policy prefix-list AnsibleIPv4PrefixList rule 2" # ] # # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'Configuration replaced by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3 replaced by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '82.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # ------------------- # # 3. Using overridden # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # Task: # # ------------- # - name: Override all prefix-lists configuration with provided configuration # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv4" # prefix_lists: # - name: "AnsibleIPv4PrefixList" # description: Rule 2 overridden by ansible # entries: # - sequence: 2 # action: "deny" # ge: 26 # prefix: "82.168.2.0/24" # - name: "OverriddenPrefixList" # description: Configuration overridden by ansible # entries: # - sequence: 10 # action: permit # prefix: "203.0.113.96/27" # le: 32 # state: overridden # # Task output: # # ------------- # "after": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "Rule 2 overridden by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "deny", # "ge": 26, # "sequence": 2, # "prefix": "82.168.2.0/24" # } # ] # }, # { # "description": "Configuration overridden by ansible", # "name": "OverriddenPrefixList", # "entries": [ # { # "action": "permit", # "sequence": 10, # "le": 32, # "prefix": "203.0.113.96/27" # } # ] # } # ] # } # ], # "before": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "changed": true, # "commands": [ # "delete policy prefix-list6 AllowIPv6Prefix", # "delete policy prefix-list6 DenyIPv6Prefix", # "set policy prefix-list AnsibleIPv4PrefixList description 'Rule 2 overridden by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'deny'", # "delete policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 ge '26'", # "delete policy prefix-list AnsibleIPv4PrefixList rule 2 le '32'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '82.168.2.0/24'", # "delete policy prefix-list AnsibleIPv4PrefixList rule 3", # "set policy prefix-list OverriddenPrefixList", # "set policy prefix-list OverriddenPrefixList description 'Configuration overridden by ansible'", # "set policy prefix-list OverriddenPrefixList rule 10", # "set policy prefix-list OverriddenPrefixList rule 10 action 'permit'", # "set policy prefix-list OverriddenPrefixList rule 10 le '32'", # "set policy prefix-list OverriddenPrefixList rule 10 prefix '203.0.113.96/27'" # ] # # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'Rule 2 overridden by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 2 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '82.168.2.0/24' # set policy prefix-list OverriddenPrefixList description 'Configuration overridden by ansible' # set policy prefix-list OverriddenPrefixList rule 10 action 'permit' # set policy prefix-list OverriddenPrefixList rule 10 le '32' # set policy prefix-list OverriddenPrefixList rule 10 prefix '203.0.113.96/27' # vyos@vyos:~$ # # ------------------- # # 4(i). Using deleted (to delete all prefix lists from the device) # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # Task: # # ------------- # - name: Delete all prefix-lists # vyos.vyos.vyos_prefix_lists: # config: # state: deleted # # Task output: # # ------------- # "after": [], # "before": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "changed": true, # "commands": [ # "delete policy prefix-list AnsibleIPv4PrefixList", # "delete policy prefix-list6 AllowIPv6Prefix", # "delete policy prefix-list6 DenyIPv6Prefix" # ] # # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # vyos@vyos:~$ # # ------------------- # # 4(ii). Using deleted (to delete all prefix lists for an AFI) # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # Task: # # ------------- # - name: Delete all prefix-lists for IPv6 AFI # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv6" # state: deleted # # Task output: # # ------------- # "after": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # } # ], # "before": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "changed": true, # "commands": [ # "delete policy prefix-list6 AllowIPv6Prefix", # "delete policy prefix-list6 DenyIPv6Prefix" # ] # # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # vyos@vyos:~$ # # ------------------- # # 4(iii). Using deleted (to delete single prefix list by name in different AFIs) # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # vyos@vyos:~$ # # Task: # # ------------- # - name: Delete a single prefix-list from different AFIs # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv4" # prefix_lists: # - name: "AnsibleIPv4PrefixList" # - afi: "ipv6" # prefix_lists: # - name: "DenyIPv6Prefix" # state: deleted # # Task output: # # ------------- # "after": [ # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # } # ] # } # ], # "before": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ], # "changed": true, # "commands": [ # "delete policy prefix-list AnsibleIPv4PrefixList", # "delete policy prefix-list6 DenyIPv6Prefix" # ] # # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep prefix-list # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # vyos@vyos:~$ # # ------------------- # # 5. Using gathered # # ------------------- # # Task: # # ------------- # - name: Gather prefix-lists configurations # vyos.vyos.vyos_prefix_lists: # config: # state: gathered # # Task output: # # ------------- # "gathered": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ] # # ------------------- # # 6. Using rendered # # ------------------- # # Task: # # ------------- # - name: Render commands externally for the described prefix-list configurations # vyos.vyos.vyos_prefix_lists: # config: # - afi: "ipv4" # prefix_lists: # - name: "AnsibleIPv4PrefixList" # description: "PL configured by ansible" # entries: # - sequence: 2 # description: "Rule 2 given by ansible" # action: "permit" # prefix: "92.168.10.0/26" # le: 32 # - sequence: 3 # description: "Rule 3" # action: "deny" # prefix: "72.168.2.0/24" # ge: 26 # - afi: "ipv6" # prefix_lists: # - name: "AllowIPv6Prefix" # description: "Configured by ansible for allowing IPv6 networks" # entries: # - sequence: 5 # description: "Permit rule" # action: "permit" # prefix: "2001:db8:8000::/35" # le: 37 # - name: DenyIPv6Prefix # description: "Configured by ansible for disallowing IPv6 networks" # entries: # - sequence: 8 # action: deny # prefix: "2001:db8:2000::/35" # le: 37 # state: rendered # # Task output: # # ------------- # "rendered": [ # "set policy prefix-list AnsibleIPv4PrefixList", # "set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32'", # "set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26'", # "set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24'", # "set policy prefix-list6 AllowIPv6Prefix", # "set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks'", # "set policy prefix-list6 AllowIPv6Prefix rule 5", # "set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 le '37'", # "set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35'", # "set policy prefix-list6 DenyIPv6Prefix", # "set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks'", # "set policy prefix-list6 DenyIPv6Prefix rule 8", # "set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny'", # "set policy prefix-list6 DenyIPv6Prefix rule 8 le '37'", # "set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35'" # ] # # ------------------- # # 7. Using parsed # # ------------------- # # sample_config.cfg: # # ------------- # set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit' # set policy prefix-list AnsibleIPv4PrefixList rule 2 description 'Rule 2 given by ansible' # set policy prefix-list AnsibleIPv4PrefixList rule 2 le '32' # set policy prefix-list AnsibleIPv4PrefixList rule 2 prefix '92.168.10.0/26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 action 'deny' # set policy prefix-list AnsibleIPv4PrefixList rule 3 description 'Rule 3' # set policy prefix-list AnsibleIPv4PrefixList rule 3 ge '26' # set policy prefix-list AnsibleIPv4PrefixList rule 3 prefix '72.168.2.0/24' # set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks' # set policy prefix-list6 AllowIPv6Prefix rule 5 action 'permit' # set policy prefix-list6 AllowIPv6Prefix rule 5 description 'Permit rule' # set policy prefix-list6 AllowIPv6Prefix rule 5 le '37' # set policy prefix-list6 AllowIPv6Prefix rule 5 prefix '2001:db8:8000::/35' # set policy prefix-list6 DenyIPv6Prefix description 'Configured by ansible for disallowing IPv6 networks' # set policy prefix-list6 DenyIPv6Prefix rule 8 action 'deny' # set policy prefix-list6 DenyIPv6Prefix rule 8 le '37' # set policy prefix-list6 DenyIPv6Prefix rule 8 prefix '2001:db8:2000::/35' # # Task: # # ------------- # - name: Parse externally provided prefix-lists configuration # vyos.vyos.vyos_prefix_lists: # running_config: "{{ lookup('file', './sample_config.cfg') }}" # state: parsed # # Task output: # # ------------- # "parsed": [ # { # "afi": "ipv4", # "prefix_lists": [ # { # "description": "PL configured by ansible", # "name": "AnsibleIPv4PrefixList", # "entries": [ # { # "action": "permit", # "description": "Rule 2 given by ansible", # "sequence": 2, # "le": 32, # "prefix": "92.168.10.0/26" # }, # { # "action": "deny", # "description": "Rule 3", # "ge": 26, # "sequence": 3, # "prefix": "72.168.2.0/24" # } # ] # } # ] # }, # { # "afi": "ipv6", # "prefix_lists": [ # { # "description": "Configured by ansible for allowing IPv6 networks", # "name": "AllowIPv6Prefix", # "entries": [ # { # "action": "permit", # "description": "Permit rule", # "sequence": 5, # "le": 37, # "prefix": "2001:db8:8000::/35" # } # ] # }, # { # "description": "Configured by ansible for disallowing IPv6 networks", # "name": "DenyIPv6Prefix", # "entries": [ # { # "action": "deny", # "sequence": 8, # "le": 37, # "prefix": "2001:db8:2000::/35" # } # ] # } # ] # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
["set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible'", "set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit'", "set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks'"]
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
["set policy prefix-list AnsibleIPv4PrefixList description 'PL configured by ansible'", "set policy prefix-list AnsibleIPv4PrefixList rule 2 action 'permit'", "set policy prefix-list6 AllowIPv6Prefix description 'Configured by ansible for allowing IPv6 networks'"]


Status ------ Authors ~~~~~~~ - Priyam Sahoo (@priyamsahoo) diff --git a/docs/vyos.vyos.vyos_route_maps_module.rst b/docs/vyos.vyos.vyos_route_maps_module.rst index f6a74d46..093eda43 100644 --- a/docs/vyos.vyos.vyos_route_maps_module.rst +++ b/docs/vyos.vyos.vyos_route_maps_module.rst @@ -1,2248 +1,2248 @@ .. _vyos.vyos.vyos_route_maps_module: ************************* vyos.vyos.vyos_route_maps ************************* **Route Map resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages route map configurations on devices running VYOS. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A list of route-map configuration.
entries
list / elements=dictionary
Route Map rules.

aliases: rules
action
string
    Choices:
  • deny
  • permit
Action for matching routes
call
string
Route map name
continue_sequence
integer
Continue on a different entry within the route-map.
description
string
Description for the rule.
match
dictionary
Route parameters to match.
as_path
string
Set as-path.
community
dictionary
BGP community attribute.
community_list
string
BGP community-list to match
exact_match
boolean
    Choices:
  • no
  • yes
BGP community-list to match
extcommunity
string
Extended community name.
interface
string
First hop interface of a route to match.
ip
dictionary
IP prefix parameters to match.
address
dictionary
IP address of route to match.
list_type
string
    Choices:
  • access-list
  • prefix-list
type of list
value
string
value of access-list and prefix list
next_hop
dictionary
next hop prefix list.
list_type
string
    Choices:
  • access-list
  • prefix-list
type of list
value
string
value of access-list and prefix list
route_source
dictionary
IP route-source to match
list_type
string
    Choices:
  • access-list
  • prefix-list
type of list
value
string
value of access-list and prefix list
ipv6
dictionary
IPv6 prefix parameters to match.
address
dictionary
IPv6 address of route to match.
list_type
string
    Choices:
  • access-list
  • prefix-list
type of list
value
string
value of access-list and prefix list
next_hop
string
next-hop ipv6 address IPv6 <h:h:h:h:h:h:h:h>.
large_community_large_community_list
string
BGP large-community-list to match.
metric
integer
Route metric <1-65535>.
origin
string
    Choices:
  • ebgp
  • ibgp
  • incomplete
bgp origin.
peer
string
Peer IP address <x.x.x.x>.
protocol
string
    Choices:
  • babel
  • bgp
  • connected
  • isis
  • kernel
  • ospf
  • ospfv3
  • rip
  • ripng
  • static
  • table
  • vnc
Source protocol to match.
rpki
string
    Choices:
  • notfound
  • invalid
  • valid
RPKI validation value.
on_match
dictionary
Exit policy on matches.
goto
integer
Rule number to goto on match <1-65535>.
next
boolean
    Choices:
  • no
  • yes
Next sequence number to goto on match.
sequence
integer
Route map rule number <1-65535>.
set
dictionary
Route parameters.
aggregator
dictionary
Border Gateway Protocol (BGP) aggregator attribute.
as
string
AS number of an aggregation.
ip
string
IP address.
as_path_exclude
string
BGP AS path exclude string ex "456 64500 45001"
as_path_prepend
string
Prepend string for a Border Gateway Protocol (BGP) AS-path attribute.
atomic_aggregate
boolean
    Choices:
  • no
  • yes
Border Gateway Protocol (BGP) atomic aggregate attribute.
bgp_extcommunity_rt
string
ExtCommunity in format AS:value
comm_list
dictionary
Border Gateway Protocol (BGP) communities matching a community-list.
comm_list
string
BGP communities with a community-list.
delete
boolean
    Choices:
  • no
  • yes
Delete BGP communities matching the community-list.
community
dictionary
Border Gateway Protocol (BGP) community attribute.
value
string
Community in 4 octet AS:value format or it can be from local-AS, no-advertise,no-expert,internet,additive,none.
extcommunity_bandwidth
string
Set Bandwidth of Origin value. 1-25600|cumulative|num-multipaths VPN extended community
extcommunity_bandwidth_non_transitive
boolean
    Choices:
  • no
  • yes
Set the bandwidth extended community encoded as non-transitive True/False VPN extended community
extcommunity_rt
string
Set route target value.ASN:nn_or_IP_address:nn VPN extended community.
extcommunity_soo
string
Set Site of Origin value. ASN:nn_or_IP_address:nn VPN extended community
ip_next_hop
string
IP address.
ipv6_next_hop
dictionary
Nexthop IPv6 address.
ip_type
string
    Choices:
  • global
  • local
Global or Local
value
string
ipv6 address
large_community
string
Set BGP large community value.
local_preference
string
Border Gateway Protocol (BGP) local preference attribute.Example <0-4294967295>.
metric
string
Destination routing protocol metric. Example <0-4294967295>.
metric_type
string
    Choices:
  • type-1
  • type-2
Open Shortest Path First (OSPF) external metric-type.
origin
string
    Choices:
  • egp
  • igp
  • incomplete
Set bgp origin.
originator_id
string
Border Gateway Protocol (BGP) originator ID attribute. Originator IP address.
src
string
Source address for route. Example <x.x.x.x> IP address.
table
string
Set prefixes to table. Example <1-200>
tag
string
Tag value for routing protocol. Example <1-65535>
weight
string
Border Gateway Protocol (BGP) weight attribute. Example <0-4294967295>
route_map
string
Route map name.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VYOS device by executing the command show configuration commands | grep route-map.
The state parsed reads the configuration from show configuration commands | grep route-map option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • deleted
  • merged ←
  • overridden
  • replaced
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.

Notes ----- .. note:: - - Tested against vyos 1.3.8 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection ``network_cli``. Examples -------- .. code-block:: yaml # Using merged # Before state # vyos@vyos:~$ show configuration commands | match "set policy route-map" # vyos@vyos:~$ - name: Merge the provided configuration with the existing running configuration register: result vyos.vyos.vyos_route_maps: &id001 config: - route_map: test1 entries: - sequence: 1 description: "test" action: permit continue: 2 on_match: next: true - route_map: test3 entries: - sequence: 1 action: permit match: rpki: invalid metric: 1 peer: 192.0.2.32 set: local_preference: 4 metric: 5 metric_type: "type-1" origin: egp originator_id: 192.0.2.34 tag: 5 weight: 4 state: merged # After State # vyos@vyos:~$ show configuration commands | match "set policy route-maps" # set policy route-map test1 rule 1 description test # set policy route-map test1 rule 1 action permit # set policy route-map test1 rule 1 continue 2 # set policy route-map test1 rule 1 on-match next # set policy route-map test3 rule 1 action permit # set policy route-map test3 rule 1 set local-preference 4 # set policy route-map test3 rule 1 set metric 5 # set policy route-map test3 rule 1 set metric-type type-1 # set policy route-map test3 rule 1 set origin egp # set policy route-map test3 rule 1 set originator-id 192.0.2.34 # set policy route-map test3 rule 1 set tag 5 # set policy route-map test3 rule 1 set weight 4 # set policy route-map test3 rule 1 match metric 1 # set policy route-map test3 rule 1 match peer 192.0.2.32 # set policy route-map test3 rule 1 match rpki invalid # "after": [ # { # "entries": [ # { # "action": "permit", # "continue_sequence": 2, # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # } # ], # "route_map": "test1" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 1, # "peer": "192.0.2.32", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "local_preference": "4", # "metric": "5", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "5", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ], # "before": [], # "changed": true, # "commands": [ # "set policy route-map test1 rule 1 description test", # "set policy route-map test1 rule 1 action permit", # "set policy route-map test1 rule 1 continue 2", # "set policy route-map test1 rule 1 on-match next", # "set policy route-map test3 rule 1 action permit", # "set policy route-map test3 rule 1 set local-preference 4", # "set policy route-map test3 rule 1 set metric 5", # "set policy route-map test3 rule 1 set metric-type type-1", # "set policy route-map test3 rule 1 set origin egp", # "set policy route-map test3 rule 1 set originator-id 192.0.2.34", # "set policy route-map test3 rule 1 set tag 5", # "set policy route-map test3 rule 1 set weight 4", # "set policy route-map test3 rule 1 match metric 1", # "set policy route-map test3 rule 1 match peer 192.0.2.32", # "set policy route-map test3 rule 1 match rpki invalid" # ], # Using replaced: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set route-map policy" # set policy route-map test2 rule 1 action 'permit' # set policy route-map test2 rule 1 description 'test' # set policy route-map test2 rule 1 on-match next # set policy route-map test2 rule 2 action 'permit' # set policy route-map test2 rule 2 on-match goto '4' # set policy route-map test3 rule 1 action 'permit' # set policy route-map test3 rule 1 match metric '1' # set policy route-map test3 rule 1 match peer '192.0.2.32' # set policy route-map test3 rule 1 match rpki 'invalid' # set policy route-map test3 rule 1 set community 'internet' # set policy route-map test3 rule 1 set ip-next-hop '192.0.2.33' # set policy route-map test3 rule 1 set local-preference '4' # set policy route-map test3 rule 1 set metric '5' # set policy route-map test3 rule 1 set metric-type 'type-1' # set policy route-map test3 rule 1 set origin 'egp' # set policy route-map test3 rule 1 set originator-id '192.0.2.34' # set policy route-map test3 rule 1 set tag '5' # set policy route-map test3 rule 1 set weight '4' # # - name: Replace the provided configuration with the existing running configuration # register: result # vyos.vyos.vyos_route_maps: &id001 # config: # - route_map: test3 # entries: # - sequence: 1 # action: permit # match: # rpki: invalid # metric: 3 # peer: 192.0.2.35 # set: # local_preference: 6 # metric: 4 # metric_type: "type-1" # origin: egp # originator_id: 192.0.2.34 # tag: 4 # weight: 4 # state: replaced # After state: # vyos@vyos:~$ show configuration commands | match "set policy route-map" # set policy route-map test3 rule 1 set local-preference 6 # set policy route-map test3 rule 1 set metric 4 # set policy route-map test3 rule 1 set tag 4 # set policy route-map test3 rule 1 match metric 3 # set policy route-map test3 rule 1 match peer 192.0.2.35 # vyos@vyos:~$ # # # Module Execution: # # "after": [ # { # "entries": [ # { # "action": "permit", # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # }, # { # "action": "permit", # "on_match": { # "goto": 4 # }, # "sequence": 2 # } # ], # "route_map": "test2" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 3, # "peer": "192.0.2.35", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "local_preference": "6", # "metric": "4", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "4", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ], # "before": [ # { # "entries": [ # { # "action": "permit", # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # }, # { # "action": "permit", # "on_match": { # "goto": 4 # }, # "sequence": 2 # } # ], # "route_map": "test2" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 1, # "peer": "192.0.2.32", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "community": { # "value": "internet" # }, # "ip_next_hop": "192.0.2.33", # "local_preference": "4", # "metric": "5", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "5", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ], # "changed": true, # "commands": [ # "delete policy route-map test3 rule 1 set ip-next-hop 192.0.2.33", # "set policy route-map test3 rule 1 set local-preference 6", # "set policy route-map test3 rule 1 set metric 4", # "set policy route-map test3 rule 1 set tag 4", # "delete policy route-map test3 rule 1 set community internet", # "set policy route-map test3 rule 1 match metric 3", # "set policy route-map test3 rule 1 match peer 192.0.2.35" # ], # # Using deleted: # ------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set policy route-map" # set policy route-map test3 rule 1 set local-preference 6 # set policy route-map test3 rule 1 set metric 4 # set policy route-map test3 rule 1 set tag 4 # set policy route-map test3 rule 1 match metric 3 # set policy route-map test3 rule 1 match peer 192.0.2.35 # vyos@vyos:~$ # # - name: Delete the provided configuration # register: result # vyos.vyos.vyos_route_maps: # config: # state: deleted # After state: # vyos@vyos:~$ show configuration commands | match "set policy route-map" # vyos@vyos:~$ # # # Module Execution: # # "after": [], # "before": [ # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 3, # "peer": "192.0.2.35", # }, # "sequence": 1, # "set": { # "local_preference": "6", # "metric": "4", # "tag": "4", # } # } # ], # "route_map": "test3" # } # ], # "changed": true, # "commands": [ # "delete policy route-map test3" # ], # # using gathered: # -------------- # # Before state: # vyos@vyos:~$ show configuration commands | match "set policy route-maps" # set policy route-map test1 rule 1 description test # set policy route-map test1 rule 1 action permit # set policy route-map test1 rule 1 continue 2 # set policy route-map test1 rule 1 on-match next # set policy route-map test3 rule 1 action permit # set policy route-map test3 rule 1 set local-preference 4 # set policy route-map test3 rule 1 set metric 5 # set policy route-map test3 rule 1 set metric-type type-1 # set policy route-map test3 rule 1 set origin egp # set policy route-map test3 rule 1 set originator-id 192.0.2.34 # set policy route-map test3 rule 1 set tag 5 # set policy route-map test3 rule 1 set weight 4 # set policy route-map test3 rule 1 match metric 1 # set policy route-map test3 rule 1 match peer 192.0.2.32 # set policy route-map test3 rule 1 match rpki invalid # # - name: gather configs # vyos.vyos.vyos_route_maps: # state: gathered # "gathered": [ # { # "entries": [ # { # "action": "permit", # "continue_sequence": 2, # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # } # ], # "route_map": "test1" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 1, # "peer": "192.0.2.32", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "local_preference": "4", # "metric": "5", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "5", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ] # Using parsed: # ------------ # parsed.cfg # set policy route-map test1 rule 1 description test # set policy route-map test1 rule 1 action permit # set policy route-map test1 rule 1 continue 2 # set policy route-map test1 rule 1 on-match next # set policy route-map test3 rule 1 action permit # set policy route-map test3 rule 1 set local-preference 4 # set policy route-map test3 rule 1 set metric 5 # set policy route-map test3 rule 1 set metric-type type-1 # set policy route-map test3 rule 1 set origin egp # set policy route-map test3 rule 1 set originator-id 192.0.2.34 # set policy route-map test3 rule 1 set tag 5 # set policy route-map test3 rule 1 set weight 4 # set policy route-map test3 rule 1 match metric 1 # set policy route-map test3 rule 1 match peer 192.0.2.32 # set policy route-map test3 rule 1 match rpki invalid # # - name: parse configs # vyos.vyos.vyos_route_maps: # running_config: "{{ lookup('file', './parsed.cfg') }}" # state: parsed # tags: # - parsed # # Module execution: # "parsed": [ # { # "entries": [ # { # "action": "permit", # "continue_sequence": 2, # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # } # ], # "route_map": "test1" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 1, # "peer": "192.0.2.32", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "local_preference": "4", # "metric": "5", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "5", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ] # # # Using rendered: # -------------- # - name: Structure provided configuration into device specific commands # register: result # vyos.vyos.vyos_route_maps: &id001 # config: # - route_map: test1 # entries: # - sequence: 1 # description: "test" # action: permit # continue_sequence: 2 # on_match: # next: True # - route_map: test3 # entries: # - sequence: 1 # action: permit # match: # rpki: invalid # metric: 1 # peer: 192.0.2.32 # set: # local_preference: 4 # metric: 5 # metric_type: "type-1" # origin: egp # originator_id: 192.0.2.34 # tag: 5 # weight: 4 # state: rendered # Module Execution: # "rendered": [ # "set policy route-map test1 rule 1 description test", # "set policy route-map test1 rule 1 action permit", # "set policy route-map test1 rule 1 continue 2", # "set policy route-map test1 rule 1 on-match next", # "set policy route-map test3 rule 1 action permit", # "set policy route-map test3 rule 1 set local-preference 4", # "set policy route-map test3 rule 1 set metric 5", # "set policy route-map test3 rule 1 set metric-type type-1", # "set policy route-map test3 rule 1 set origin egp", # "set policy route-map test3 rule 1 set originator-id 192.0.2.34", # "set policy route-map test3 rule 1 set tag 5", # "set policy route-map test3 rule 1 set weight 4", # "set policy route-map test3 rule 1 match metric 1", # "set policy route-map test3 rule 1 match peer 192.0.2.32", # "set policy route-map test3 rule 1 match rpki invalid" # ] # # # Using overridden: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set policy route-map" # set policy route-map test2 rule 1 action 'permit' # set policy route-map test2 rule 1 description 'test' # set policy route-map test2 rule 1 on-match next # set policy route-map test2 rule 2 action 'permit' # set policy route-map test2 rule 2 on-match goto '4' # set policy route-map test3 rule 1 action 'permit' # set policy route-map test3 rule 1 match metric '1' # set policy route-map test3 rule 1 match peer '192.0.2.32' # set policy route-map test3 rule 1 match rpki 'invalid' # set policy route-map test3 rule 1 set community 'internet' # set policy route-map test3 rule 1 set ip-next-hop '192.0.2.33' # set policy route-map test3 rule 1 set local-preference '4' # set policy route-map test3 rule 1 set metric '5' # set policy route-map test3 rule 1 set metric-type 'type-1' # set policy route-map test3 rule 1 set origin 'egp' # set policy route-map test3 rule 1 set originator-id '192.0.2.34' # set policy route-map test3 rule 1 set tag '5' # set policy route-map test3 rule 1 set weight '4' # # - name: Override the existing configuration with the provided running configuration # register: result # vyos.vyos.vyos_route_maps: &id001 # config: # - route_map: test3 # entries: # - sequence: 1 # action: permit # match: # rpki: invalid # metric: 3 # peer: 192.0.2.35 # set: # local_preference: 6 # metric: 4 # metric_type: "type-1" # origin: egp # originator_id: 192.0.2.34 # tag: 4 # weight: 4 # state: overridden # After state: # vyos@vyos:~$ show configuration commands | match "set policy route-map" # set policy route-map test3 rule 1 set metric-type 'type-1' # set policy route-map test3 rule 1 set origin 'egp' # set policy route-map test3 rule 1 set originator-id '192.0.2.34' # set policy route-map test3 rule 1 set weight '4' # set policy route-map test3 rule 1 set local-preference 6 # set policy route-map test3 rule 1 set metric 4 # set policy route-map test3 rule 1 set tag 4 # set policy route-map test3 rule 1 match metric 3 # set policy route-map test3 rule 1 match peer 192.0.2.35 # set policy route-map test3 rule 1 match rpki 'invalid' # Module Execution: # "after": [ # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 3, # "peer": "192.0.2.35", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "local_preference": "6", # "metric": "4", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "4", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ], # "before": [ # { # "entries": [ # { # "action": "permit", # "description": "test", # "on_match": { # "next": true # }, # "sequence": 1 # }, # { # "action": "permit", # "on_match": { # "goto": 4 # }, # "sequence": 2 # } # ], # "route_map": "test2" # }, # { # "entries": [ # { # "action": "permit", # "match": { # "metric": 1, # "peer": "192.0.2.32", # "rpki": "invalid" # }, # "sequence": 1, # "set": { # "community": { # "value": "internet" # }, # "ip_next_hop": "192.0.2.33", # "local_preference": "4", # "metric": "5", # "metric_type": "type-1", # "origin": "egp", # "originator_id": "192.0.2.34", # "tag": "5", # "weight": "4" # } # } # ], # "route_map": "test3" # } # ], # "changed": true, # "commands": [ # "delete policy route-map test2", # "delete policy route-map test3 rule 1 set ip-next-hop 192.0.2.33", # "set policy route-map test3 rule 1 set local-preference 6", # "set policy route-map test3 rule 1 set metric 4", # "set policy route-map test3 rule 1 set tag 4", # "delete policy route-map test3 rule 1 set community internet", # "set policy route-map test3 rule 1 match metric 3", # "set policy route-map test3 rule 1 match peer 192.0.2.35" # ], Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['set policy route-map test3 rule 1 set local-preference 6', 'set policy route-map test3 rule 1 set metric 4', 'set policy route-map test3 rule 1 set tag 4']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['set policy route-map test3 rule 1 set local-preference 6', 'set policy route-map test3 rule 1 set metric 4', 'set policy route-map test3 rule 1 set tag 4']


Status ------ Authors ~~~~~~~ - Ashwini Mhatre (@amhatre) diff --git a/docs/vyos.vyos.vyos_snmp_server_module.rst b/docs/vyos.vyos.vyos_snmp_server_module.rst index d11afaae..1fe0b10c 100644 --- a/docs/vyos.vyos.vyos_snmp_server_module.rst +++ b/docs/vyos.vyos.vyos_snmp_server_module.rst @@ -1,2043 +1,2043 @@ .. _vyos.vyos.vyos_snmp_server_module: ************************** vyos.vyos.vyos_snmp_server ************************** **Manages snmp_server resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages the snmp server attributes of Vyos network devices Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
SNMP server configuration.
communities
list / elements=dictionary
Community name configuration.
authorization_type
string
    Choices:
  • ro
  • rw
Authorization type (rw or ro)
clients
list / elements=string
IP address of SNMP client allowed to contact system
name
string
Community name
networks
list / elements=string
Subnet of SNMP client(s) allowed to contact system
contact
string
Person to contact about the system.
description
string
Description information
listen_addresses
list / elements=dictionary
IP address to listen for incoming SNMP requests
address
string
IP address to listen for incoming SNMP requests.
port
integer
Port for SNMP service
location
string
Location information
smux_peer
string
Register a subtree for SMUX-based processing.
snmp_v3
dictionary
Simple Network Management Protocol (SNMP) v3
engine_id
string
Specifies the EngineID as a hex value
groups
list / elements=dictionary
Specifies the group with name groupname
group
string
Specifies the group with name groupname
mode
string
    Choices:
  • ro
  • rw
Defines the read/write access
seclevel
string
    Choices:
  • auth
  • priv
Defines security level
view
string
Defines the name of view
trap_targets
list / elements=dictionary
Defines SNMP target for inform or traps for IP
address
string
IP/IPv6 address of trap target
authentication
dictionary
Defines the authentication
encrypted_key
string
Defines the encrypted password for authentication
plaintext_key
string
Defines the clear text password for authentication
type
string
    Choices:
  • md5
  • sha
Defines the protocol using for authentication
port
integer
Specifies the TCP/UDP port of a destination for SNMP traps/informs.
privacy
dictionary
Defines the privacy
encrypted_key
string
Defines the encrypted password for privacy
plaintext_key
string
Defines the clear text password for privacy
type
string
    Choices:
  • des
  • aes
Defines the protocol using for privacy
protocol
string
    Choices:
  • tcp
  • udp
Defines protocol for notification between TCP and UDP
type
string
    Choices:
  • inform
  • trap
Specifies the type of notification between inform and trap
users
list / elements=dictionary
Defines username for authentication
authentication
dictionary
Defines the authentication
encrypted_key
string
Defines the encrypted password for authentication
plaintext_key
string
Defines the clear text password for authentication
type
string
    Choices:
  • md5
  • sha
Defines the protocol using for authentication
group
string
Specifies group for user name
mode
string
    Choices:
  • ro
  • rw
Specifies the mode for access rights of user, read only or write
privacy
dictionary
Defines the privacy
encrypted_key
string
Defines the encrypted password for privacy
plaintext_key
string
Defines the clear text password for privacy
type
string
    Choices:
  • des
  • aes
Defines the protocol using for privacy
tsm_key
string
Specifies finger print or file name of TSM certificate.
user
string
Specifies the user with name username
views
list / elements=dictionary
Specifies the view with name viewname
exclude
string
Exclude is optional argument.
mask
string
Defines a bit-mask that is indicating which subidentifiers of the associated subtree OID should be regarded as significant.
oid
string
Specify oid
view
string
view name
trap_source
string
SNMP trap source address
trap_target
dictionary
Address of trap target
address
string
Address of trap target
community
string
Community used when sending trap information
port
integer
Destination port used for trap notification
running_config
string
The state the configuration should be left in.
The states replaced and overridden have identical behaviour for this module.
Please refer to examples for more details.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state the configuration should be left in

Notes ----- .. note:: - - Tested against vyos 1.3.8, 1.4.1 + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025, 1.4.1 - This module works with connection ``network_cli``. - The Configuration defaults of the Vyos network devices are supposed to hinder idempotent behavior of plays Examples -------- .. code-block:: yaml # Using merged # Before State: # vyos@vyos:~$ show configuration commands | grep snmp # vyos@vyos:~$ - name: Merge provided configuration with device configuration vyos.vyos.vyos_snmp_server: config: communities: - name: "switches" authorization_type: "rw" - name: "bridges" clients: ["1.1.1.1", "12.1.1.10"] contact: "admin2@ex.com" listen_addresses: - address: "20.1.1.1" - address: "100.1.2.1" port: 33 snmp_v3: users: - user: admin_user authentication: plaintext_key: "abc1234567" type: "sha" privacy: plaintext_key: "abc1234567" type: "aes" state: merged # After State: # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges client '1.1.1.1' # set service snmp community bridges client '12.1.1.10' # set service snmp community switches authorization 'rw' # set service snmp contact 'admin2@ex.com' # set service snmp listen-address 20.1.1.1 # set service snmp listen-address 100.1.2.1 port '33' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' # vyos@vyos:~$ # # Module Execution: # # "after": { # "communities": [ # { # "clients": [ # "1.1.1.1", # "12.1.1.10" # ], # "name": "bridges" # }, # { # "authorization_type": "rw", # "name": "switches" # } # ], # "contact": "admin2@ex.com", # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # }, # { # "address": "20.1.1.1" # } # ], # "snmp_v3": { # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # } # ] # } # }, # "before": {}, # "changed": true, # "commands": [ # "set service snmp community switches authorization rw", # "set service snmp community bridges client 1.1.1.1", # "set service snmp community bridges client 12.1.1.10", # "set service snmp listen-address 20.1.1.1", # "set service snmp listen-address 100.1.2.1 port 33", # "set service snmp v3 user admin_user auth type sha", # "set service snmp v3 user admin_user auth plaintext-key ********", # "set service snmp v3 user admin_user privacy type aes", # "set service snmp v3 user admin_user privacy plaintext-key ********", # "set service snmp contact admin2@ex.com" # ], # # Using replaced # Before State # ------------- # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges client '1.1.1.1' # set service snmp community bridges client '12.1.1.10' # set service snmp community switches authorization 'rw' # set service snmp contact 'admin2@ex.com' # set service snmp listen-address 20.1.1.1 # set service snmp listen-address 100.1.2.1 port '33' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' - name: Replace SNMP Server configuration vyos.vyos.vyos_snmp_server: config: communities: - name: "bridges" networks: ["1.1.1.0/24", "12.1.1.0/24"] location: "RDU, NC" listen_addresses: - address: "100.1.2.1" port: 33 snmp_v3: groups: - group: "default" view: "default" users: - user: admin_user authentication: plaintext_key: "abc1234567" type: "sha" privacy: plaintext_key: "abc1234567" type: "aes" group: "default" - user: guest_user2 authentication: plaintext_key: "opq1234567" type: "sha" privacy: plaintext_key: "opq1234567" type: "aes" views: - view: "default" oid: 1 state: replaced # After State: # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges network '1.1.1.0/24' # set service snmp community bridges network '12.1.1.0/24' # set service snmp community switches # set service snmp listen-address 100.1.2.1 port '33' # set service snmp location 'RDU, NC' # set service snmp v3 group default view 'default' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user group 'default' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' # set service snmp v3 user guest_user2 auth plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 auth type 'sha' # set service snmp v3 user guest_user2 privacy plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 privacy type 'aes' # set service snmp v3 view default oid 1 # vyos@vyos:~$ # # # Module Execution: # "after": { # "communities": [ # { # "name": "bridges", # "networks": [ # "1.1.1.0/24", # "12.1.1.0/24" # ] # }, # { # "name": "switches" # } # ], # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # } # ], # "location": "RDU, NC", # "snmp_v3": { # "groups": [ # { # "group": "default", # "view": "default" # } # ], # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "group": "default", # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # }, # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "guest_user2" # } # ], # "views": [ # { # "oid": "1", # "view": "default" # } # ] # } # }, # "before": { # "communities": [ # { # "clients": [ # "1.1.1.1", # "12.1.1.10" # ], # "name": "bridges" # }, # { # "authorization_type": "rw", # "name": "switches" # } # ], # "contact": "admin2@ex.com", # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # }, # { # "address": "20.1.1.1" # } # ], # "snmp_v3": { # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # } # ] # } # }, # "changed": true, # "commands": [ # "delete service snmp contact admin2@ex.com", # "delete service snmp listen-address 20.1.1.1", # "delete service snmp community switches authorization rw", # "delete service snmp community bridges client 12.1.1.10", # "delete service snmp community bridges client 1.1.1.1", # "set service snmp community bridges network 1.1.1.0/24", # "set service snmp community bridges network 12.1.1.0/24", # "set service snmp v3 group default view default", # "set service snmp v3 user admin_user group default", # "set service snmp v3 user guest_user2 auth type sha", # "set service snmp v3 user guest_user2 auth plaintext-key ********", # "set service snmp v3 user guest_user2 privacy type aes", # "set service snmp v3 user guest_user2 privacy plaintext-key ********", # "set service snmp v3 view default oid 1", # "set service snmp location 'RDU, NC'" # ], # Using overridden: # Before State # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges client '1.1.1.1' # set service snmp community bridges client '12.1.1.10' # set service snmp community switches authorization 'rw' # set service snmp contact 'admin2@ex.com' # set service snmp listen-address 20.1.1.1 # set service snmp listen-address 100.1.2.1 port '33' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' - name: Override SNMP server config vyos.vyos.vyos_snmp_server: config: communities: - name: "bridges" networks: ["1.1.1.0/24", "12.1.1.0/24"] location: "RDU, NC" listen_addresses: - address: "100.1.2.1" port: 33 snmp_v3: groups: - group: "default" view: "default" users: - user: admin_user authentication: plaintext_key: "abc1234567" type: "sha" privacy: plaintext_key: "abc1234567" type: "aes" group: "default" - user: guest_user2 authentication: plaintext_key: "opq1234567" type: "sha" privacy: plaintext_key: "opq1234567" type: "aes" views: - view: "default" oid: 1 state: overridden # After State: # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges network '1.1.1.0/24' # set service snmp community bridges network '12.1.1.0/24' # set service snmp community switches # set service snmp listen-address 100.1.2.1 port '33' # set service snmp location 'RDU, NC' # set service snmp v3 group default view 'default' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user group 'default' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' # set service snmp v3 user guest_user2 auth plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 auth type 'sha' # set service snmp v3 user guest_user2 privacy plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 privacy type 'aes' # set service snmp v3 view default oid 1 # vyos@vyos:~$ # # # Module Execution: # "after": { # "communities": [ # { # "name": "bridges", # "networks": [ # "1.1.1.0/24", # "12.1.1.0/24" # ] # }, # { # "name": "switches" # } # ], # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # } # ], # "location": "RDU, NC", # "snmp_v3": { # "groups": [ # { # "group": "default", # "view": "default" # } # ], # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "group": "default", # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # }, # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "guest_user2" # } # ], # "views": [ # { # "oid": "1", # "view": "default" # } # ] # } # }, # "before": { # "communities": [ # { # "clients": [ # "1.1.1.1", # "12.1.1.10" # ], # "name": "bridges" # }, # { # "authorization_type": "rw", # "name": "switches" # } # ], # "contact": "admin2@ex.com", # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # }, # { # "address": "20.1.1.1" # } # ], # "snmp_v3": { # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # } # ] # } # }, # "changed": true, # "commands": [ # "delete service snmp contact admin2@ex.com", # "delete service snmp listen-address 20.1.1.1", # "delete service snmp community switches authorization rw", # "delete service snmp community bridges client 12.1.1.10", # "delete service snmp community bridges client 1.1.1.1", # "set service snmp community bridges network 1.1.1.0/24", # "set service snmp community bridges network 12.1.1.0/24", # "set service snmp v3 group default view default", # "set service snmp v3 user admin_user group default", # "set service snmp v3 user guest_user2 auth type sha", # "set service snmp v3 user guest_user2 auth plaintext-key ********", # "set service snmp v3 user guest_user2 privacy type aes", # "set service snmp v3 user guest_user2 privacy plaintext-key ********", # "set service snmp v3 view default oid 1", # "set service snmp location 'RDU, NC'" # ], # Using deleted: # Before State: # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges network '1.1.1.0/24' # set service snmp community bridges network '12.1.1.0/24' # set service snmp community switches # set service snmp listen-address 100.1.2.1 port '33' # set service snmp location 'RDU, NC' # set service snmp v3 group default view 'default' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user group 'default' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' # set service snmp v3 user guest_user2 auth plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 auth type 'sha' # set service snmp v3 user guest_user2 privacy plaintext-key 'opq1234567' # set service snmp v3 user guest_user2 privacy type 'aes' # set service snmp v3 view default oid 1 - name: Delete Config vyos.vyos.vyos_snmp_server: state: deleted # After State: # vyos@vyos:~$ show configuration commands | grep snmp # vyos@vyos:~$ # # Module Execution: # "after": {}, # "before": { # "communities": [ # { # "name": "bridges", # "networks": [ # "1.1.1.0/24", # "12.1.1.0/24" # ] # }, # { # "name": "switches" # } # ], # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # } # ], # "location": "RDU, NC", # "snmp_v3": { # "groups": [ # { # "group": "default", # "view": "default" # } # ], # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "group": "default", # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # }, # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "guest_user2" # } # ], # "views": [ # { # "oid": "1", # "view": "default" # } # ] # } # }, # "changed": true, # "commands": [ # "delete service snmp" # ], # Using rendered: - name: Render provided configuration vyos.vyos.vyos_snmp_server: config: communities: - name: "switches" authorization_type: "rw" - name: "bridges" clients: ["1.1.1.1", "12.1.1.10"] contact: "admin2@ex.com" listen_addresses: - address: "20.1.1.1" - address: "100.1.2.1" port: 33 snmp_v3: users: - user: admin_user authentication: plaintext_key: "abc1234567" type: "sha" privacy: plaintext_key: "abc1234567" type: "aes" state: rendered # Module Execution: # "rendered": [ # "set service snmp community switches authorization rw", # "set service snmp community bridges client 1.1.1.1", # "set service snmp community bridges client 12.1.1.10", # "set service snmp listen-address 20.1.1.1", # "set service snmp listen-address 100.1.2.1 port 33", # "set service snmp v3 user admin_user auth type sha", # "set service snmp v3 user admin_user auth plaintext-key ********", # "set service snmp v3 user admin_user privacy type aes", # "set service snmp v3 user admin_user privacy plaintext-key ********", # "set service snmp contact admin2@ex.com" # ] # # Using Gathered: # Before State: # vyos@vyos:~$ show configuration commands | grep snmp # set service snmp community bridges client '1.1.1.1' # set service snmp community bridges client '12.1.1.10' # set service snmp community switches authorization 'rw' # set service snmp contact 'admin2@ex.com' # set service snmp listen-address 20.1.1.1 # set service snmp listen-address 100.1.2.1 port '33' # set service snmp v3 user admin_user auth plaintext-key 'abc1234567' # set service snmp v3 user admin_user auth type 'sha' # set service snmp v3 user admin_user privacy plaintext-key 'abc1234567' # set service snmp v3 user admin_user privacy type 'aes' - name: Gather SNMP server config vyos.vyos.vyos_snmp_server: state: gathered # Module Execution: # "gathered": { # "communities": [ # { # "clients": [ # "1.1.1.1", # "12.1.1.10" # ], # "name": "bridges" # }, # { # "authorization_type": "rw", # "name": "switches" # } # ], # "contact": "admin2@ex.com", # "listen_addresses": [ # { # "address": "100.1.2.1", # "port": 33 # }, # { # "address": "20.1.1.1" # } # ], # "snmp_v3": { # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "admin_user" # } # ] # } # }, # Using parsed: # _parsed_snmp.cfg # set service snmp community routers authorization 'ro' # set service snmp community routers client '203.0.113.10' # set service snmp community routers client '203.0.113.20' # set service snmp community routers network '192.0.2.0/24' # set service snmp community routers network '2001::/64' # set service snmp contact 'admin@example.com' # set service snmp listen-address 172.16.254.36 port '161' # set service snmp listen-address 2001::1 # set service snmp location 'UK, London' # set service snmp trap-target 203.0.113.10 # set service snmp v3 engineid '000000000000000000000002' # set service snmp v3 group default mode 'ro' # set service snmp v3 group default view 'default' # set service snmp v3 user vyos auth plaintext-key 'vyos12345678' # set service snmp v3 user vyos auth type 'sha' # set service snmp v3 user vyos group 'default' # set service snmp v3 user vyos privacy plaintext-key 'vyos12345678' # set service snmp v3 user vyos privacy type 'aes' # set service snmp v3 view default oid 1 - name: Parse SNMP server config vyos.vyos.vyos_snmp_server: running_config: "{{ lookup('file', './_parsed_snmp.cfg') }}" state: parsed # Module Execution: # "parsed": { # "communities": [ # { # "authorization_type": "ro", # "clients": [ # "203.0.113.10", # "203.0.113.20" # ], # "name": "routers", # "networks": [ # "192.0.2.0/24", # "2001::/64" # ] # } # ], # "contact": "admin@example.com", # "listen_addresses": [ # { # "address": "172.16.254.36", # "port": 161 # }, # { # "address": "2001::1" # } # ], # "location": "UK, London", # "snmp_v3": { # "engine_id": "000000000000000000000002", # "groups": [ # { # "group": "default", # "mode": "ro", # "view": "default" # } # ], # "users": [ # { # "authentication": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "sha" # }, # "group": "default", # "privacy": { # "plaintext_key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", # "type": "aes" # }, # "user": "vyos" # } # ], # "views": [ # { # "oid": "1", # "view": "default" # } # ] # }, # "trap_target": { # "address": "203.0.113.10" # } # } # Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
["set service snmp community routers authorization 'ro'", "set service snmp community routers client '203.0.113.10'", "set service snmp community routers network '192.0.2.0/24'"]
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
["set service snmp community routers authorization 'ro'", "set service snmp community routers client '203.0.113.10'", "set service snmp community routers network '192.0.2.0/24'"]


Status ------ Authors ~~~~~~~ - Gomathi Selvi Srinivasan (@GomathiselviS) diff --git a/docs/vyos.vyos.vyos_static_routes_module.rst b/docs/vyos.vyos.vyos_static_routes_module.rst index 5c7723de..071911a1 100644 --- a/docs/vyos.vyos.vyos_static_routes_module.rst +++ b/docs/vyos.vyos.vyos_static_routes_module.rst @@ -1,1164 +1,1164 @@ .. _vyos.vyos.vyos_static_routes_module: **************************** vyos.vyos.vyos_static_routes **************************** **Static routes resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages attributes of static routes on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A provided static route configuration.
address_families
list / elements=dictionary
A dictionary specifying the address family to which the static route(s) belong.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Specifies the type of route.
routes
list / elements=dictionary
A dictionary that specify the static route configurations.
blackhole_config
dictionary
Configured to silently discard packets.
distance
integer
Distance for the route.
type
string
This is to configure only blackhole.
dest
string / required
An IPv4/v6 address in CIDR notation that specifies the destination network for the static route.
next_hops
list / elements=dictionary
Next hops to the specified destination.
admin_distance
integer
Distance value for the route.
enabled
boolean
    Choices:
  • no
  • yes
Disable IPv4/v6 next-hop static route.
forward_router_address
string
The IP address of the next hop that can be used to reach the destination network.
interface
string
Name of the outgoing interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep static route.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion.

Notes ----- .. note:: - - Tested against VyOS 1.3.8. + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep static # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_static_routes: config: - address_families: - afi: ipv4 routes: - dest: 192.0.2.32/28 blackhole_config: type: blackhole next_hops: - forward_router_address: 192.0.2.6 - forward_router_address: 192.0.2.7 - address_families: - afi: ipv6 routes: - dest: '2001:db8:1000::/36' blackhole_config: distance: 2 next_hops: - forward_router_address: '2001:db8:2000:2::1' - forward_router_address: '2001:db8:2000:2::2' state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ # "set protocols static route 192.0.2.32/28", # "set protocols static route 192.0.2.32/28 blackhole", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.6'", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.7'", # "set protocols static route6 2001:db8:1000::/36", # "set protocols static route6 2001:db8:1000::/36 blackhole distance '2'", # "set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1'", # "set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2'" # ] # # "after": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.6" # }, # { # "forward_router_address": "192.0.2.7" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route 192.0.2.33/28 'blackhole' # set protocols static route 192.0.2.33/28 next-hop '192.0.2.3' # set protocols static route 192.0.2.33/28 next-hop '192.0.2.4' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # - name: Replace device configurations of listed static routes with provided configurations vyos.vyos.vyos_static_routes: config: - address_families: - afi: ipv4 routes: - dest: 192.0.2.32/28 blackhole_config: distance: 2 next_hops: - forward_router_address: 192.0.2.7 enabled: false - forward_router_address: 192.0.2.9 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.6" # }, # { # "forward_router_address": "192.0.2.7" # } # ] # }, # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.33/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.3" # }, # { # "forward_router_address": "192.0.2.4" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # # "commands": [ # "delete protocols static route 192.0.2.32/28 next-hop '192.0.2.6'", # "delete protocols static route 192.0.2.32/28 next-hop '192.0.2.7'", # "set protocols static route 192.0.2.32/28 next-hop 192.0.2.7 'disable'", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.7'", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.9'", # "set protocols static route 192.0.2.32/28 blackhole distance '2'" # ] # # "after": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "enabled": false, # "forward_router_address": "192.0.2.7" # }, # { # "forward_router_address": "192.0.2.9" # } # ] # }, # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.33/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.3" # }, # { # "forward_router_address": "192.0.2.4" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 blackhole distance '2' # set protocols static route 192.0.2.32/28 next-hop 192.0.2.7 'disable' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.9' # set protocols static route 192.0.2.33/28 'blackhole' # set protocols static route 192.0.2.33/28 next-hop '192.0.2.3' # set protocols static route 192.0.2.33/28 next-hop '192.0.2.4' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 blackhole distance '2' # set protocols static route 192.0.2.32/28 next-hop 192.0.2.7 'disable' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.9' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_static_routes: config: - address_families: - afi: ipv4 routes: - dest: 198.0.2.48/28 next_hops: - forward_router_address: 192.0.2.18 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "enabled": false, # "forward_router_address": "192.0.2.7" # }, # { # "forward_router_address": "192.0.2.9" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # # "commands": [ # "delete protocols static route 192.0.2.32/28", # "delete protocols static route6 2001:db8:1000::/36", # "set protocols static route 198.0.2.48/28", # "set protocols static route 198.0.2.48/28 next-hop '192.0.2.18'" # # # "after": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "dest": "198.0.2.48/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.18" # } # ] # } # ] # } # ] # } # ] # # # After state # ------------ # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 198.0.2.48/28 next-hop '192.0.2.18' # Using deleted to delete static route based on afi # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # - name: Delete static route based on afi. vyos.vyos.vyos_static_routes: config: - address_families: - afi: ipv4 - afi: ipv6 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.6" # }, # { # "forward_router_address": "192.0.2.7" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # "commands": [ # "delete protocols static route", # "delete protocols static route6" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep static # set protocols 'static' # Using deleted to delete all the static routes when passes config is empty # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # - name: Delete all the static routes. vyos.vyos.vyos_static_routes: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.6" # }, # { # "forward_router_address": "192.0.2.7" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # "commands": [ # "delete protocols static route", # "delete protocols static route6" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep static # set protocols 'static' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_static_routes: config: - address_families: - afi: ipv4 routes: - dest: 192.0.2.32/28 blackhole_config: type: blackhole next_hops: - forward_router_address: 192.0.2.6 - forward_router_address: 192.0.2.7 - address_families: - afi: ipv6 routes: - dest: '2001:db8:1000::/36' blackhole_config: distance: 2 next_hops: - forward_router_address: '2001:db8:2000:2::1' - forward_router_address: '2001:db8:2000:2::2' state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set protocols static route 192.0.2.32/28", # "set protocols static route 192.0.2.32/28 blackhole", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.6'", # "set protocols static route 192.0.2.32/28 next-hop '192.0.2.7'", # "set protocols static route6 2001:db8:1000::/36", # "set protocols static route6 2001:db8:1000::/36 blackhole distance '2'", # "set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1'", # "set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2'" # ] # Using parsed # # - name: Parse the provided running configuration vyos.vyos.vyos_static_routes: running_config: | set protocols static route 192.0.2.32/28 'blackhole' set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' set protocols static route6 2001:db8:1000::/36 blackhole distance '2' set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # Using gathered # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' # - name: Gather listed static routes with provided configurations vyos.vyos.vyos_static_routes: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "address_families": [ # { # "afi": "ipv4", # "routes": [ # { # "blackhole_config": { # "type": "blackhole" # }, # "dest": "192.0.2.32/28", # "next_hops": [ # { # "forward_router_address": "192.0.2.6" # }, # { # "forward_router_address": "192.0.2.7" # } # ] # } # ] # }, # { # "afi": "ipv6", # "routes": [ # { # "blackhole_config": { # "distance": 2 # }, # "dest": "2001:db8:1000::/36", # "next_hops": [ # { # "forward_router_address": "2001:db8:2000:2::1" # }, # { # "forward_router_address": "2001:db8:2000:2::2" # } # ] # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep static # set protocols static route 192.0.2.32/28 'blackhole' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.6' # set protocols static route 192.0.2.32/28 next-hop '192.0.2.7' # set protocols static route6 2001:db8:1000::/36 blackhole distance '2' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::1' # set protocols static route6 2001:db8:1000::/36 next-hop '2001:db8:2000:2::2' Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
["set protocols static route 192.0.2.32/28 next-hop '192.0.2.6'", "set protocols static route 192.0.2.32/28 'blackhole'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) diff --git a/docs/vyos.vyos.vyos_system_module.rst b/docs/vyos.vyos.vyos_system_module.rst index ba0fd01c..4cb6f5bc 100644 --- a/docs/vyos.vyos.vyos_system_module.rst +++ b/docs/vyos.vyos.vyos_system_module.rst @@ -1,196 +1,196 @@ .. _vyos.vyos.vyos_system_module: ********************* vyos.vyos.vyos_system ********************* **Run `set system` commands on VyOS devices** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - Runs one or more commands on remote devices running VyOS. This module can also be introspected to validate key parameters before returning successfully. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
domain_name
string
The new domain name to apply to the device.
domain_search
list / elements=string
A list of domain names to search. Mutually exclusive with name_server
host_name
string
Configure the device hostname parameter. This option takes an ASCII string value.
name_server
list / elements=string
A list of name servers to use with the device. Mutually exclusive with domain_search

aliases: name_servers
state
string
    Choices:
  • present ←
  • absent
Whether to apply (present) or remove (absent) the settings.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: configure hostname and domain-name vyos.vyos.vyos_system: host_name: vyos01 domain_name: test.example.com - name: remove all configuration vyos.vyos.vyos_system: state: absent - name: configure name servers vyos.vyos.vyos_system: name_servers - 8.8.8.8 - 8.8.4.4 - name: configure domain search suffixes vyos.vyos.vyos_system: domain_search: - sub1.example.com - sub2.example.com Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['set system hostname vyos01', 'set system domain-name foo.example.com']


Status ------ Authors ~~~~~~~ - Nathaniel Case (@Qalthos) diff --git a/docs/vyos.vyos.vyos_user_module.rst b/docs/vyos.vyos.vyos_user_module.rst index f95200b6..42b8ccce 100644 --- a/docs/vyos.vyos.vyos_user_module.rst +++ b/docs/vyos.vyos.vyos_user_module.rst @@ -1,514 +1,514 @@ .. _vyos.vyos.vyos_user_module: ******************* vyos.vyos.vyos_user ******************* **Manage the collection of local users on VyOS device** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module provides declarative management of the local usernames configured on network devices. It allows playbooks to manage either individual usernames or the collection of usernames in the current running config. It also supports purging usernames from the configuration that are not explicitly defined. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
aggregate
list / elements=dictionary
The set of username objects to be configured on the remote VyOS device. The list entries can either be the username or a hash of username and properties. This argument is mutually exclusive with the name argument.

aliases: users, collection
configured_password
string
The password to be configured on the VyOS device. The password needs to be provided in clear and it will be encrypted on the device.
encrypted_password
string
The encrypted password of the user account on the remote device. Note that unlike the configured_password argument, this argument ignores the update_password and updates if the value is different from the one in the device running config.
full_name
string
The full_name argument provides the full name of the user account to be created on the remote device. This argument accepts any text string value.
name
string / required
The username to be configured on the VyOS device. This argument accepts a string value and is mutually exclusive with the aggregate argument.
public_keys
list / elements=dictionary
Public keys for authentiction over SSH.
key
string / required
Public key string (base64 encoded)
name
string / required
Name of the key (usually in the form of user@hostname)
type
string / required
    Choices:
  • ssh-dss
  • ssh-rsa
  • ecdsa-sha2-nistp256
  • ecdsa-sha2-nistp384
  • ssh-ed25519
  • ecdsa-sha2-nistp521
Type of the key
state
string
    Choices:
  • present
  • absent
Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration
update_password
string
    Choices:
  • on_create
  • always
Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to always, the password will always be updated in the device and when set to on_create the password will be updated only if the username is created.
configured_password
string
The password to be configured on the VyOS device. The password needs to be provided in clear and it will be encrypted on the device.
encrypted_password
string
The encrypted password of the user account on the remote device. Note that unlike the configured_password argument, this argument ignores the update_password and updates if the value is different from the one in the device running config.
full_name
string
The full_name argument provides the full name of the user account to be created on the remote device. This argument accepts any text string value.
name
string
The username to be configured on the VyOS device. This argument accepts a string value and is mutually exclusive with the aggregate argument.
public_keys
list / elements=dictionary
Public keys for authentiction over SSH.
key
string / required
Public key string (base64 encoded)
name
string / required
Name of the key (usually in the form of user@hostname)
type
string / required
    Choices:
  • ssh-dss
  • ssh-rsa
  • ecdsa-sha2-nistp256
  • ecdsa-sha2-nistp384
  • ssh-ed25519
  • ecdsa-sha2-nistp521
Type of the key
purge
boolean
    Choices:
  • no ←
  • yes
Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user (the current defined set of users).
state
string
    Choices:
  • present ←
  • absent
Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration
update_password
string
    Choices:
  • on_create
  • always ←
Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to always, the password will always be updated in the device and when set to on_create the password will be updated only if the username is created.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: create a new user vyos.vyos.vyos_user: name: ansible configured_password: password state: present - name: remove all users except admin vyos.vyos.vyos_user: purge: true - name: set multiple users to level operator vyos.vyos.vyos_user: aggregate: - name: netop - name: netend state: present - name: Change Password for User netop vyos.vyos.vyos_user: name: netop configured_password: '{{ new_password }}' update_password: always state: present Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['set system login user authentication plaintext-password password']


Status ------ Authors ~~~~~~~ - Trishna Guha (@trishnaguha) diff --git a/docs/vyos.vyos.vyos_vlan_module.rst b/docs/vyos.vyos.vyos_vlan_module.rst index 1d5c877a..937fe3fe 100644 --- a/docs/vyos.vyos.vyos_vlan_module.rst +++ b/docs/vyos.vyos.vyos_vlan_module.rst @@ -1,405 +1,405 @@ .. _vyos.vyos.vyos_vlan_module: ******************* vyos.vyos.vyos_vlan ******************* **Manage VLANs on VyOS network devices** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module provides declarative management of VLANs on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
address
string
Configure Virtual interface address.
aggregate
list / elements=dictionary
List of VLANs definitions.
address
string
Configure Virtual interface address.
associated_interfaces
list / elements=string
This is a intent option and checks the operational state of the for given vlan name for associated interfaces. If the value in the associated_interfaces does not match with the operational state of vlan on device it will result in failure.
delay
integer
Delay the play should wait to check for declarative intent params values.
interfaces
list / elements=string / required
List of interfaces that should be associated to the VLAN.
name
string
Name of the VLAN.
state
string
    Choices:
  • present
  • absent
State of the VLAN configuration.
vlan_id
integer / required
ID of the VLAN. Range 0-4094.
associated_interfaces
list / elements=string
This is a intent option and checks the operational state of the for given vlan name for associated interfaces. If the value in the associated_interfaces does not match with the operational state of vlan on device it will result in failure.
delay
integer
Default:
10
Delay the play should wait to check for declarative intent params values.
interfaces
list / elements=string
List of interfaces that should be associated to the VLAN.
name
string
Name of the VLAN.
purge
boolean
    Choices:
  • no ←
  • yes
Purge VLANs not defined in the aggregate parameter.
state
string
    Choices:
  • present ←
  • absent
State of the VLAN configuration.
vlan_id
integer
ID of the VLAN. Range 0-4094.

Notes ----- .. note:: - - Tested against VyOS 1.1.8 (helium). + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. - For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide ` Examples -------- .. code-block:: yaml - name: Create vlan vyos.vyos.vyos_vlan: vlan_id: 100 name: vlan-100 interfaces: eth1 state: present - name: Add interfaces to VLAN vyos.vyos.vyos_vlan: vlan_id: 100 interfaces: - eth1 - eth2 - name: Configure virtual interface address vyos.vyos.vyos_vlan: vlan_id: 100 interfaces: eth1 address: 172.26.100.37/24 - name: vlan interface config + intent vyos.vyos.vyos_vlan: vlan_id: 100 interfaces: eth0 associated_interfaces: - eth0 - name: vlan intent check vyos.vyos.vyos_vlan: vlan_id: 100 associated_interfaces: - eth3 - eth4 - name: Delete vlan vyos.vyos.vyos_vlan: vlan_id: 100 interfaces: eth1 state: absent Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['set interfaces ethernet eth1 vif 100 description VLAN 100', 'set interfaces ethernet eth1 vif 100 address 172.26.100.37/24', 'delete interfaces ethernet eth1 vif 100']


Status ------ Authors ~~~~~~~ - Trishna Guha (@trishnaguha) diff --git a/plugins/modules/vyos_banner.py b/plugins/modules/vyos_banner.py index 6b1da84b..c6598023 100644 --- a/plugins/modules/vyos_banner.py +++ b/plugins/modules/vyos_banner.py @@ -1,187 +1,187 @@ #!/usr/bin/python # -*- coding: utf-8 -*- from __future__ import absolute_import, division, print_function __metaclass__ = type # (c) 2017, Ansible by Red Hat, inc # # This file is part of Ansible by Red Hat # # Ansible is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # Ansible is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with Ansible. If not, see . # DOCUMENTATION = """ module: vyos_banner author: Trishna Guha (@trishnaguha) short_description: Manage multiline banners on VyOS devices description: - This will configure both pre-login and post-login banners on remote devices running VyOS. It allows playbooks to add or remote banner text from the active running configuration. version_added: 1.0.0 notes: -- Tested against VyOS 1.1.8 (helium). +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). options: banner: description: - Specifies which banner that should be configured on the remote device. required: true choices: - pre-login - post-login type: str text: description: - The banner text that should be present in the remote device running configuration. This argument accepts a multiline string, with no empty lines. Requires I(state=present). type: str state: description: - Specifies whether or not the configuration is present in the current devices active running configuration. default: present type: str choices: - present - absent extends_documentation_fragment: - vyos.vyos.vyos """ EXAMPLES = """ - name: configure the pre-login banner vyos.vyos.vyos_banner: banner: pre-login text: | this is my pre-login banner that contains a multiline string state: present - name: remove the post-login banner vyos.vyos.vyos_banner: banner: post-login state: absent """ RETURN = """ commands: description: The list of configuration mode commands to send to the device returned: always type: list sample: - banner pre-login - this is my pre-login banner - that contains a multiline - string """ import re from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import ( get_config, load_config, ) def spec_to_commands(updates, module): commands = list() want, have = updates state = module.params["state"] if state == "absent": if have.get("state") != "absent" or ( have.get("state") != "absent" and "text" in have.keys() and have["text"] ): commands.append("delete system login banner %s" % module.params["banner"]) elif state == "present": if want["text"] and want["text"].encode().decode("unicode_escape") != have.get("text"): banner_cmd = "set system login banner %s " % module.params["banner"] banner_cmd += want["text"].strip() commands.append(banner_cmd) return commands def config_to_dict(module): data = get_config(module) output = None obj = {"banner": module.params["banner"], "state": "absent"} for line in data.split("\n"): if line.startswith("set system login banner %s" % obj["banner"]): match = re.findall(r"%s (.*)" % obj["banner"], line, re.M) output = match if output: obj["text"] = output[0].encode().decode("unicode_escape") obj["state"] = "present" return obj def map_params_to_obj(module): text = module.params["text"] if text: text = "%r" % (str(text).strip()) return { "banner": module.params["banner"], "text": text, "state": module.params["state"], } def main(): """main entry point for module execution""" argument_spec = dict( banner=dict(required=True, choices=["pre-login", "post-login"]), text=dict(), state=dict(default="present", choices=["present", "absent"]), ) required_if = [("state", "present", ("text",))] module = AnsibleModule( argument_spec=argument_spec, required_if=required_if, supports_check_mode=True, ) warnings = list() result = {"changed": False} if warnings: result["warnings"] = warnings want = map_params_to_obj(module) have = config_to_dict(module) commands = spec_to_commands((want, have), module) result["commands"] = commands if commands: commit = not module.check_mode load_config(module, commands, commit=commit) result["changed"] = True module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_bgp_address_family.py b/plugins/modules/vyos_bgp_address_family.py index 14c3605d..c59b43e4 100644 --- a/plugins/modules/vyos_bgp_address_family.py +++ b/plugins/modules/vyos_bgp_address_family.py @@ -1,1229 +1,1238 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2024 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) """ The module file for vyos_bgp_address_family """ from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_bgp_address_family version_added: 1.0.0 short_description: BGP Address Family resource module description: - This module manages BGP address family configuration of interfaces on devices running VYOS. -- Tested against VYOS 1.3, 1.4 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 +- The provided examples of commands are valid for VyOS 1.4+ author: Gomathi Selvi Srinivasan (@GomathiselviS) options: config: description: A dict of BGP global configuration for interfaces. type: dict suboptions: as_number: description: - AS number type: int address_family: description: BGP address-family parameters. type: list elements: dict suboptions: afi: description: BGP address family settings. type: str choices: ['ipv4', 'ipv6'] aggregate_address: description: - BGP aggregate network. type: list elements: dict suboptions: prefix: description: BGP aggregate network. type: str as_set: description: Generate AS-set path information for this aggregate address. type: bool summary_only: description: Announce the aggregate summary network only. type: bool networks: description: BGP network type: list elements: dict suboptions: prefix: description: BGP network address type: str path_limit: description: AS path hop count limit type: int backdoor: description: Network as a backdoor route. type: bool route_map: description: Route-map to modify route attributes type: str redistribute: description: Redistribute routes from other protocols into BGP type: list elements: dict suboptions: protocol: description: types of routes to be redistributed. type: str choices: ['connected', 'kernel', 'ospf', 'ospfv3', 'rip', 'ripng', 'static'] table: description: Redistribute non-main Kernel Routing Table. type: str route_map: description: Route map to filter redistributed routes type: str metric: description: Metric for redistributed routes. type: int neighbors: description: BGP neighbor type: list elements: dict suboptions: neighbor_address: description: BGP neighbor address (v4/v6). type: str address_family: description: address family. type: list elements: dict suboptions: afi: description: BGP neighbor parameters. type: str choices: ['ipv4', 'ipv6'] allowas_in: description: Number of occurrences of AS number. type: int as_override: description: AS for routes sent to this neighbor to be the local AS. type: bool attribute_unchanged: description: BGP attributes are sent unchanged. type: dict suboptions: as_path: description: as_path attribute type: bool med: description: med attribute type: bool next_hop: description: next_hop attribute type: bool capability: description: Advertise capabilities to this neighbor. type: dict suboptions: dynamic: description: Advertise dynamic capability to this neighbor. type: bool orf: description: Advertise ORF capability to this neighbor. type: str choices: ['send', 'receive'] default_originate: description: Send default route to this neighbor type: str distribute_list: description: Access-list to filter route updates to/from this neighbor. type: list elements: dict suboptions: action: description: Access-list to filter outgoing/incoming route updates to this neighbor type: str choices: ['export', 'import'] acl: description: Access-list number. type: int filter_list: description: As-path-list to filter route updates to/from this neighbor. type: list elements: dict suboptions: action: description: filter outgoing/incoming route updates type: str choices: ['export', 'import'] path_list: description: As-path-list to filter type: str maximum_prefix: description: Maximum number of prefixes to accept from this neighbor nexthop-self Nexthop for routes sent to this neighbor to be the local router. type: int nexthop_local: description: Nexthop attributes. type: bool nexthop_self: description: Nexthop for routes sent to this neighbor to be the local router. type: bool peer_group: description: IPv4 peer group for this peer type: str prefix_list: description: Prefix-list to filter route updates to/from this neighbor. type: list elements: dict suboptions: action: description: filter outgoing/incoming route updates type: str choices: ['export', 'import'] prefix_list: description: Prefix-list to filter type: str remove_private_as: description: Remove private AS numbers from AS path in outbound route updates type: bool route_map: description: Route-map to filter route updates to/from this neighbor. type: list elements: dict suboptions: action: description: filter outgoing/incoming route updates type: str choices: ['export', 'import'] route_map: description: route-map to filter type: str route_reflector_client: description: Neighbor as a route reflector client type: bool route_server_client: description: Neighbor is route server client type: bool soft_reconfiguration: description: Soft reconfiguration for neighbor type: bool unsupress_map: description: Route-map to selectively unsuppress suppressed routes type: str weight: description: Default weight for routes from this neighbor type: int running_config: type: str description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VYOS device by executing the command B(show configuration command | match bgp). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. state: description: - The state the configuration should be left in. type: str choices: - merged - replaced - deleted - gathered - parsed - rendered - purged - overridden default: merged """ EXAMPLES = """ # Using merged # Before state # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ - name: Merge provided configuration with device configuration vyos.vyos.vyos_bgp_address_family: config: as_number: "100" address_family: - afi: "ipv4" redistribute: - protocol: "static" metric: 50 neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" maximum_prefix: 45 nexthop_self: true route_map: - action: "export" route_map: "map01" - action: "import" route_map: "map01" weight: 50 # After State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' # vyos@vyos:~$ # # Module Execution: # # "after": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": {}, # "changed": true, # "commands": [ -# "set protocols bgp 100 address-family ipv4-unicast redistribute static metric 50", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight 50" +# "set protocols bgp address-family ipv4-unicast redistribute static metric 50", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight 50" # ], # # Using replaced: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' # vyos@vyos:~$ - name: Replace provided configuration with device configuration vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv6" maximum_prefix: 45 nexthop_self: true state: replaced # After State: # # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' # vyos@vyos:~$ # # # # Module Execution: # "after": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list", -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate", -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged", -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number 4", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map map01", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export 10", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix 45", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self" +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list", +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate", +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged", +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number 4", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map map01", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export 10", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix 45", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self" # ], # Using overridden # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast network 35.1.1.0/24 backdoor -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only -# set protocols bgp 100 address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast network 35.1.1.0/24 backdoor +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only +# set protocols bgp address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast maximum-prefix '45' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate route-map 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list export '10' # vyos@vyos:~$ - name: Override vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "100.11.34.12" address_family: - afi: "ipv6" maximum_prefix: 45 nexthop_self: true route_map: - action: "import" route_map: "map01" address_family: - afi: "ipv4" aggregate_address: - prefix: "60.9.2.0/24" summary_only: true - afi: "ipv6" redistribute: - protocol: "static" metric: 50 state: overridden # After State # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only -# set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only +# set protocols bgp address-family ipv6-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' # vyos@vyos:~$ # Module Execution: # "after": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "prefix": "60.9.2.0/24", # "summary_only": true # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "import", # "route_map": "map01" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "networks": [ # { # "backdoor": true, # "prefix": "35.1.1.0/24" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "aggregate_address": [ # { # "prefix": "6601:1:1:1::/64", # "summary_only": true # } # ], # "networks": [ # { # "prefix": "5001:1:1:1::/64", # "route_map": "map01" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4" # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast distribute-list", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast default-originate", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast as-override", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast allowas-in", -# "delete protocols bgp 100 address-family ipv6 aggregate-address", -# "delete protocols bgp 100 address-family ipv6 network", -# "delete protocols bgp 100 address-family ipv4 network", -# "delete protocols bgp 100 address-family ipv4 redistribute", -# "set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only", -# "set protocols bgp 100 address-family ipv6-unicast redistribute static metric 50", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix 45", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import map01" +# "delete protocols bgp neighbor 20.33.1.1/24 address-family", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast distribute-list", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast default-originate", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast attribute-unchanged", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast as-override", +# "delete protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast allowas-in", +# "delete protocols bgp address-family ipv6 aggregate-address", +# "delete protocols bgp address-family ipv6 network", +# "delete protocols bgp address-family ipv4 network", +# "delete protocols bgp address-family ipv4 redistribute", +# "set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only", +# "set protocols bgp address-family ipv6-unicast redistribute static metric 50", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix 45", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import map01" # ], # # Using deleted: # Before State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight '50' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self -# set protocols bgp 100 neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast aggregate-address 60.9.2.0/24 summary-only +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp address-family ipv6-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map 'map01' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export '10' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix '45' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import 'map01' +# set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight '50' +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast maximum-prefix '45' +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast nexthop-self +# set protocols bgp neighbor 100.11.34.12 address-family ipv6-unicast route-map import 'map01' # vyos@vyos:~$ - name: Delete vyos.vyos.vyos_bgp_address_family: config: as_number: "100" neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv6" - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" state: deleted # After State: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 100.11.34.12 +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv6-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 100.11.34.12 # vyos@vyos:~$ # # # Module Execution: # # "after": { # "address_family": [ # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "before": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "prefix": "60.9.2.0/24", # "summary_only": true # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "export", # "route_map": "map01" # }, # { # "action": "import", # "route_map": "map01" # } # ], # "weight": 50 # }, # { # "afi": "ipv6", # "maximum_prefix": 45, # "nexthop_self": true, # "route_map": [ # { # "action": "import", # "route_map": "map01" # } # ] # } # ], # "neighbor_address": "100.11.34.12" # }, # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # }, # { # "afi": "ipv6", # "default_originate": "map01", # "distribute_list": [ # { # "acl": 10, # "action": "export" # } # ] # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # }, # "changed": true, # "commands": [ -# "delete protocols bgp 100 address-family ipv4-unicast", -# "delete protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast", -# "delete protocols bgp 100 neighbor 100.11.34.12 address-family" +# "delete protocols bgp address-family ipv4-unicast", +# "delete protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast", +# "delete protocols bgp neighbor 100.11.34.12 address-family" # ], # # using parsed: # parsed.cfg # set protocols bgp 65536 address-family ipv4-unicast aggregate-address 192.0.2.0/24 as-set # set protocols bgp 65536 address-family ipv4-unicast network 192.1.13.0/24 route-map 'map01' # set protocols bgp 65536 address-family ipv4-unicast network 192.2.13.0/24 backdoor # set protocols bgp 65536 address-family ipv6-unicast redistribute ripng metric '20' # set protocols bgp 65536 neighbor 192.0.2.25 address-family ipv4-unicast route-map export 'map01' # set protocols bgp 65536 neighbor 192.0.2.25 address-family ipv4-unicast soft-reconfiguration inbound # set protocols bgp 65536 neighbor 203.0.113.5 address-family ipv6-unicast attribute-unchanged next-hop - name: parse configs vyos.vyos.vyos_bgp_address_family: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed # Module execution result: # # "parsed": { # "address_family": [ # { # "afi": "ipv4", # "aggregate_address": [ # { # "as_set": true, # "prefix": "192.0.2.0/24" # } # ], # "networks": [ # { # "prefix": "192.1.13.0/24", # "route_map": "map01" # }, # { # "backdoor": true, # "prefix": "192.2.13.0/24" # } # ] # }, # { # "afi": "ipv6", # "redistribute": [ # { # "metric": 20, # "protocol": "ripng" # } # ] # } # ], # "as_number": 65536, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "route_map": [ # { # "action": "export", # "route_map": "map01" # } # ], # "soft_reconfiguration": true # } # ], # "neighbor_address": "192.0.2.25" # }, # { # "address_family": [ # { # "afi": "ipv6", # "attribute_unchanged": { # "next_hop": true # } # } # ], # "neighbor_address": "203.0.113.5" # } # ] # # Using gathered: # Native config: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 100 address-family ipv4-unicast network 35.1.1.0/24 backdoor -# set protocols bgp 100 address-family ipv4-unicast redistribute static metric '50' -# set protocols bgp 100 address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only -# set protocols bgp 100 address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' -# set protocols bgp 100 address-family ipv6-unicast redistribute static metric '50' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override -# set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med -# set protocols bgp 100 neighbor 100.11.34.12 +# set protocols bgp system-as 100 +# set protocols bgp address-family ipv4-unicast network 35.1.1.0/24 backdoor +# set protocols bgp address-family ipv4-unicast redistribute static metric '50' +# set protocols bgp address-family ipv6-unicast aggregate-address 6601:1:1:1::/64 summary-only +# set protocols bgp address-family ipv6-unicast network 5001:1:1:1::/64 route-map 'map01' +# set protocols bgp address-family ipv6-unicast redistribute static metric '50' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number '4' +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override +# set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med +# set protocols bgp neighbor 100.11.34.12 - name: gather configs vyos.vyos.vyos_bgp_address_family: state: gathered # Module execution result: # # "gathered": { # "address_family": [ # { # "afi": "ipv4", # "networks": [ # { # "backdoor": true, # "prefix": "35.1.1.0/24" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # }, # { # "afi": "ipv6", # "aggregate_address": [ # { # "prefix": "6601:1:1:1::/64", # "summary_only": true # } # ], # "networks": [ # { # "prefix": "5001:1:1:1::/64", # "route_map": "map01" # } # ], # "redistribute": [ # { # "metric": 50, # "protocol": "static" # } # ] # } # ], # "as_number": 100, # "neighbors": [ # { # "address_family": [ # { # "afi": "ipv4", # "allowas_in": 4, # "as_override": true, # "attribute_unchanged": { # "med": true # } # } # ], # "neighbor_address": "20.33.1.1/24" # } # ] # Using rendered: - name: Render vyos.vyos.vyos_bgp_address_family: config: as_number: "100" address_family: - afi: "ipv4" redistribute: - protocol: "static" metric: 50 neighbors: - neighbor_address: "20.33.1.1/24" address_family: - afi: "ipv4" allowas_in: 4 as_override: true attribute_unchanged: med: true - afi: "ipv6" default_originate: "map01" distribute_list: - action: "export" acl: 10 - neighbor_address: "100.11.34.12" address_family: - afi: "ipv4" maximum_prefix: 45 nexthop_self: true route_map: - action: "export" route_map: "map01" - action: "import" route_map: "map01" weight: 50 state: rendered # Module Execution: # "rendered": [ -# "set protocols bgp 100 address-family ipv4-unicast redistribute static metric 50", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", -# "set protocols bgp 100 neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", -# "set protocols bgp 100 neighbor 100.11.34.12 address-family ipv4-unicast weight 50" +# "set protocols bgp address-family ipv4-unicast redistribute static metric 50", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast allowas-in number 4", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast as-override", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv4-unicast attribute-unchanged med", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast default-originate route-map map01", +# "set protocols bgp neighbor 20.33.1.1/24 address-family ipv6-unicast distribute-list export 10", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast maximum-prefix 45", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast nexthop-self", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map export map01", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast route-map import map01", +# "set protocols bgp neighbor 100.11.34.12 address-family ipv4-unicast weight 50" # ] """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: - sample command 1 - sample command 2 - sample command 3 rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - sample command 1 - sample command 2 - sample command 3 gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.bgp_address_family.bgp_address_family import ( Bgp_address_familyArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.bgp_address_family.bgp_address_family import ( Bgp_address_family, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ module = AnsibleModule( argument_spec=Bgp_address_familyArgs.argument_spec, mutually_exclusive=[["config", "running_config"]], required_if=[ ["state", "merged", ["config"]], ["state", "replaced", ["config"]], ["state", "overridden", ["config"]], ["state", "rendered", ["config"]], ["state", "parsed", ["running_config"]], ], supports_check_mode=True, ) result = Bgp_address_family(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_bgp_global.py b/plugins/modules/vyos_bgp_global.py index 4d7db472..fe14bc0f 100644 --- a/plugins/modules/vyos_bgp_global.py +++ b/plugins/modules/vyos_bgp_global.py @@ -1,1536 +1,1544 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2024 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) """ The module file for vyos_bgp_global """ from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_bgp_global version_added: 1.0.0 short_description: BGP global resource module description: - This module manages BGP global configuration of interfaces on devices running VYOS. -- Tested against VYOS 1.3, 1.4 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 +- The provided examples of commands are valid for VyOS 1.4+ author: - Gomathi Selvi Srinivasan (@GomathiselviS) options: config: description: A dict of BGP global configuration for interfaces. type: dict suboptions: as_number: description: - AS number. type: int # aggregate_address: # description: # - BGP aggregate network. # type: list # elements: dict # suboptions: # prefix: # description: # - BGP aggregate network. # type: str # as_set: # description: # - Generate AS-set path information for this aggregate address. # type: bool # summary_only: # description: # - Announce the aggregate summary network only. # type: bool #maximum_paths: --> moved to address-family before 1.3 # description: BGP multipaths # type: list # elements: dict # suboptions: # path: # description: BGP multipaths # type: str # count: # description: No. of paths. # type: int neighbor: description: BGP neighbor type: list elements: dict suboptions: address: description: - BGP neighbor address (v4/v6). type: str advertisement_interval: description: - Minimum interval for sending routing updates. type: int # bfd: # <-- added in 1.3 # description: Enable Bidirectional Forwarding Detection (BFD) support # type: dict # suboptions: # check-control-plane-failure: # description: # - Allow to write CBIT independence in BFD outgoing packets # and read both C-BIT value of BFD and lookup BGP peer status # type: bool # allowas_in: --> Moved to address-family before 1.3 # description: # - Number of occurrences of AS number. # type: int # as_override: --> Moved to address-family before 1.3 # description: # - AS for routes sent to this neighbor to be the local AS. # type: bool # attribute_unchanged: --> Moved to address-family before 1.3 # description: # - BGP attributes are sent unchanged. # type: dict # suboptions: # as_path: # description: as_path # type: bool # med: # description: med # type: bool # next_hop: # description: next_hop # type: bool capability: description: - Advertise capabilities to this neighbor. type: dict suboptions: dynamic: description: - Advertise dynamic capability to this neighbor. type: bool extended_nexthop: description: - Advertise extended nexthop capability to this neighbor. type: bool # orf: --> Removed before 1.3 # description: # - Advertise ORF capability to this neighbor. # type: str # choices: # - send # - receive default_originate: description: - Send default route to this neighbor type: str description: description: - Description of the neighbor type: str disable_capability_negotiation: description: - Disbale capability negotiation with the neighbor type: bool disable_connected_check: description: - Disable check to see if EBGP peer's address is a connected route. type: bool disable_send_community: description: - Disable sending community attributes to this neighbor. type: str choices: ['extended', 'standard'] # distribute_list: --> Moved to address-family before 1.3 # description: Access-list to filter route updates to/from this neighbor. # type: list # elements: dict # suboptions: # action: # description: Access-list to filter outgoing/incoming route updates to this neighbor # type: str # choices: ['export', 'import'] # acl: # description: Access-list number. # type: int ebgp_multihop: description: - Allow this EBGP neighbor to not be on a directly connected network. Specify the number hops. type: int # interface: # <-- added in 1.3 # description: interface parameters # type: dict # suboptions: # peer_group: # description: Peer group for this neighbor # type: str # remote_as: # description: # - Remote AS number # - Or 'external' for any number except this AS number # - or 'internal' for this AS number # type: str # v6only: # description: Enable BGP with v6 link-local only # type: dict # suboptions: # peer_group: # description: Peer group for this neighbor # type: str # remote_as: # description: # - Remote AS number # - Or 'external' for any number except this AS number # - or 'internal' for this AS number # filter_list: --> Moved to address-family before 1.3 # description: As-path-list to filter route updates to/from this neighbor. # type: list # elements: dict # suboptions: # action: # description: filter outgoing/incoming route updates # type: str # choices: ['export', 'import'] # path_list: # description: As-path-list to filter # type: str local_as: description: local as number not to be prepended to updates from EBGP peers type: int # maximum_prefix: --> Moved to address-family before 1.3 # description: Maximum number of prefixes to accept from this neighbor # nexthop-self Nexthop for routes sent to this neighbor to be the local router. # type: int # nexthop_self: --> Moved to address-family before 1.3 # description: Nexthop for routes sent to this neighbor to be the local router. # type: bool override_capability: description: Ignore capability negotiation with specified neighbor. type: bool passive: description: Do not initiate a session with this neighbor type: bool password: description: BGP MD5 password type: str peer_group_name: description: IPv4 peer group for this peer type: str peer_group: description: True if all the configs under this neighbor key is for peer group template. type: bool port: description: Neighbor's BGP port type: int # prefix_list: --> Moved to address-family before 1.3 # description: Prefix-list to filter route updates to/from this neighbor. # type: list # elements: dict # suboptions: # action: # description: filter outgoing/incoming route updates # type: str # choices: ['export', 'import'] # prefix_list: # description: Prefix-list to filter # type: str remote_as: description: Neighbor BGP AS number type: int # remove_private_as: --> Moved to address-family before 1.3 # description: Remove private AS numbers from AS path in outbound route updates # type: bool # route_map: --> Moved to address-family before 1.3 # description: Route-map to filter route updates to/from this neighbor. # type: list # elements: dict # suboptions: # action: # description: filter outgoing/incoming route updates # type: str # choices: ['export', 'import'] # route_map: # description: route-map to filter # type: str # route_reflector_client: --> Moved to address-family before 1.3 # description: Neighbor as a route reflector client # type: bool # route_server_client: --> Removed prior to 1.3 # description: Neighbor is route server client # type: bool shutdown: description: Administratively shut down neighbor type: bool # soft_reconfiguration: --> Moved to address-family before 1.3 # description: Soft reconfiguration for neighbor # type: bool solo: # <-- added in 1.3 description: Do not send back prefixes learned from the neighbor type: bool strict_capability_match: description: Enable strict capability negotiation type: bool # unsuppress_map: --> Moved to address-family before 1.3 # description: Route-map to selectively unsuppress suppressed routes # type: str # weight: --> Moved to address-family before 1.3 # description: Default weight for routes from this neighbor # type: int timers: description: Neighbor timers type: dict suboptions: connect: description: BGP connect timer for this neighbor. type: int holdtime: description: BGP hold timer for this neighbor type: int keepalive: description: BGP keepalive interval for this neighbor type: int ttl_security: description: Number of the maximum number of hops to the BGP peer type: int update_source: description: Source IP of routing updates type: str # network: # description: BGP network # type: list # elements: dict # suboptions: # address: # description: BGP network address # type: str # backdoor: # description: Network as a backdoor route # type: bool # route_map: # description: Route-map to modify route attributes # type: str # redistribute: # description: Redistribute routes from other protocols into BGP # type: list # elements: dict # suboptions: # protocol: # description: types of routes to be redistributed. # type: str # choices: ['connected', 'kernel', 'ospf', 'rip', 'static'] # route_map: # description: Route map to filter redistributed routes # type: str # metric: # description: Metric for redistributed routes. # type: int timers: description: BGP protocol timers type: dict suboptions: keepalive: description: Keepalive interval type: int holdtime: description: Hold time interval type: int bgp_params: description: BGP parameters type: dict suboptions: always_compare_med: description: Always compare MEDs from different neighbors type: bool bestpath: description: Default bestpath selection mechanism type: dict suboptions: as_path: description: AS-path attribute comparison parameters type: str choices: ['confed', 'ignore'] compare_routerid: description: Compare the router-id for identical EBGP paths type: bool med: description: MED attribute comparison parameters type: str choices: ['confed', 'missing-as-worst'] cluster_id: description: Route-reflector cluster-id type: str confederation: description: AS confederation parameters type: list elements: dict suboptions: identifier: description: Confederation AS identifier type: int peers: description: Peer ASs in the BGP confederation type: int dampening: description: Enable route-flap dampening type: dict suboptions: half_life: description: Half-life penalty in seconds type: int max_suppress_time: description: Maximum duration to suppress a stable route type: int re_use: description: Time to start reusing a route type: int start_suppress_time: description: When to start suppressing a route type: int default: description: BGP defaults type: dict suboptions: local_pref: description: Default local preference type: int no_ipv4_unicast: description: | Deactivate IPv4 unicast for a peer by default Deprecated: Unavailable after 1.4 type: bool deterministic_med: description: Compare MEDs between different peers in the same AS type: bool disable_network_import_check: description: Disable IGP route check for network statements type: bool distance: description: Administrative distances for BGP routes type: list elements: dict suboptions: type: description: Type of route type: str choices: ['external', 'internal', 'local'] value: description: distance type: int prefix: description: Administrative distance for a specific BGP prefix type: int enforce_first_as: description: Require first AS in the path to match peer's AS type: bool graceful_restart: description: Maximum time to hold onto restarting peer's stale paths type: int log_neighbor_changes: description: Log neighbor up/down changes and reset reason type: bool no_client_to_client_reflection: description: Disable client to client route reflection type: bool no_fast_external_failover: description: Disable immediate session reset if peer's connected link goes down type: bool router_id: description: BGP router-id type: str scan_time: description: BGP route scanner interval type: int state: description: - The state the configuration should be left in. - State I(purged) removes all the BGP configurations from the target device. Use caution with this state.('delete protocols bgp ') - State I(deleted) only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context. - Running states I(deleted) and I(replaced) will result in an error if there are address-family configuration lines present under neighbor context that is is to be removed. Please use the M(vyos.vyos.vyos_bgp_address_family) module for prior cleanup. - Refer to examples for more details. type: str choices: [deleted, merged, purged, replaced, gathered, rendered, parsed] default: merged running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the EOS device by executing the command B(show running-config | section bgp). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str """ EXAMPLES = """ # Using merged # Before state # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ - name: Merge provided configuration with device configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" aggregate_address: - prefix: "203.0.113.0/24" as_set: true - prefix: "192.0.2.0/24" summary_only: true network: - address: "192.1.13.0/24" backdoor: true redistribute: - protocol: "kernel" metric: 45 - protocol: "connected" route_map: "map01" maximum_paths: - path: "ebgp" count: 20 - path: "ibgp" count: 55 timers: keepalive: 35 bgp_params: bestpath: as_path: "confed" compare_routerid: true default: no_ipv4_unicast: true router_id: "192.1.2.9" confederation: - peers: 20 - peers: 55 - identifier: 66 neighbor: - address: "192.0.2.25" disable_connected_check: true timers: holdtime: 30 keepalive: 10 - address: "203.0.113.5" attribute_unchanged: as_path: true med: true ebgp_multihop: 2 remote_as: 101 update_source: "192.0.2.25" - address: "5001::64" maximum_prefix: 34 distribute_list: - acl: 20 action: "export" - acl: 40 action: "import" state: merged # After State # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' -# set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' -# set protocols bgp 65536 maximum-paths ebgp '20' -# set protocols bgp 65536 maximum-paths ibgp '55' -# set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' -# set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' -# set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' -# set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' -# set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' -# set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' -# set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' -# set protocols bgp 65536 network 192.1.13.0/24 'backdoor' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters confederation identifier '66' -# set protocols bgp 65536 parameters confederation peers '20' -# set protocols bgp 65536 parameters confederation peers '55' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters router-id '192.1.2.9' -# set protocols bgp 65536 redistribute connected route-map 'map01' -# set protocols bgp 65536 redistribute kernel metric '45' -# set protocols bgp 65536 timers keepalive '35' +# set protocols bgp system-as 65536 +# set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' +# set protocols bgp aggregate-address 203.0.113.0/24 'as-set' +# set protocols bgp maximum-paths ebgp '20' +# set protocols bgp maximum-paths ibgp '55' +# set protocols bgp neighbor 192.0.2.25 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.25 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.25 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' +# set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' +# set protocols bgp neighbor 203.0.113.5 remote-as '101' +# set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' +# set protocols bgp neighbor 5001::64 distribute-list export '20' +# set protocols bgp neighbor 5001::64 distribute-list import '40' +# set protocols bgp neighbor 5001::64 maximum-prefix '34' +# set protocols bgp network 192.1.13.0/24 'backdoor' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters confederation identifier '66' +# set protocols bgp parameters confederation peers '20' +# set protocols bgp parameters confederation peers '55' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters router-id '192.1.2.9' +# set protocols bgp redistribute connected route-map 'map01' +# set protocols bgp redistribute kernel metric '45' +# set protocols bgp timers keepalive '35' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "before": {}, # "changed": true, # "commands": [ -# "set protocols bgp 65536 neighbor 192.0.2.25 disable-connected-check", -# "set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime 30", -# "set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive 10", -# "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged as-path", -# "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged med", -# "set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged next-hop", -# "set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop 2", -# "set protocols bgp 65536 neighbor 203.0.113.5 remote-as 101", -# "set protocols bgp 65536 neighbor 203.0.113.5 update-source 192.0.2.25", -# "set protocols bgp 65536 neighbor 5001::64 maximum-prefix 34", -# "set protocols bgp 65536 neighbor 5001::64 distribute-list export 20", -# "set protocols bgp 65536 neighbor 5001::64 distribute-list import 40", -# "set protocols bgp 65536 redistribute kernel metric 45", -# "set protocols bgp 65536 redistribute connected route-map map01", -# "set protocols bgp 65536 network 192.1.13.0/24 backdoor", -# "set protocols bgp 65536 aggregate-address 203.0.113.0/24 as-set", -# "set protocols bgp 65536 aggregate-address 192.0.2.0/24 summary-only", -# "set protocols bgp 65536 parameters bestpath as-path confed", -# "set protocols bgp 65536 parameters bestpath compare-routerid", -# "set protocols bgp 65536 parameters default no-ipv4-unicast", -# "set protocols bgp 65536 parameters router-id 192.1.2.9", -# "set protocols bgp 65536 parameters confederation peers 20", -# "set protocols bgp 65536 parameters confederation peers 55", -# "set protocols bgp 65536 parameters confederation identifier 66", -# "set protocols bgp 65536 maximum-paths ebgp 20", -# "set protocols bgp 65536 maximum-paths ibgp 55", -# "set protocols bgp 65536 timers keepalive 35" +# "set protocols bgp neighbor 192.0.2.25 disable-connected-check", +# "set protocols bgp neighbor 192.0.2.25 timers holdtime 30", +# "set protocols bgp neighbor 192.0.2.25 timers keepalive 10", +# "set protocols bgp neighbor 203.0.113.5 attribute-unchanged as-path", +# "set protocols bgp neighbor 203.0.113.5 attribute-unchanged med", +# "set protocols bgp neighbor 203.0.113.5 attribute-unchanged next-hop", +# "set protocols bgp neighbor 203.0.113.5 ebgp-multihop 2", +# "set protocols bgp neighbor 203.0.113.5 remote-as 101", +# "set protocols bgp neighbor 203.0.113.5 update-source 192.0.2.25", +# "set protocols bgp neighbor 5001::64 maximum-prefix 34", +# "set protocols bgp neighbor 5001::64 distribute-list export 20", +# "set protocols bgp neighbor 5001::64 distribute-list import 40", +# "set protocols bgp redistribute kernel metric 45", +# "set protocols bgp redistribute connected route-map map01", +# "set protocols bgp network 192.1.13.0/24 backdoor", +# "set protocols bgp aggregate-address 203.0.113.0/24 as-set", +# "set protocols bgp aggregate-address 192.0.2.0/24 summary-only", +# "set protocols bgp parameters bestpath as-path confed", +# "set protocols bgp parameters bestpath compare-routerid", +# "set protocols bgp parameters default no-ipv4-unicast", +# "set protocols bgp parameters router-id 192.1.2.9", +# "set protocols bgp parameters confederation peers 20", +# "set protocols bgp parameters confederation peers 55", +# "set protocols bgp parameters confederation identifier 66", +# "set protocols bgp maximum-paths ebgp 20", +# "set protocols bgp maximum-paths ibgp 55", +# "set protocols bgp timers keepalive 35" # ], # Using replaced: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' -# set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' -# set protocols bgp 65536 maximum-paths ebgp '20' -# set protocols bgp 65536 maximum-paths ibgp '55' -# set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' -# set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' -# set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' -# set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' -# set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' -# set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' -# set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' -# set protocols bgp 65536 network 192.1.13.0/24 'backdoor' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters confederation identifier '66' -# set protocols bgp 65536 parameters confederation peers '20' -# set protocols bgp 65536 parameters confederation peers '55' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters router-id '192.1.2.9' -# set protocols bgp 65536 redistribute connected route-map 'map01' -# set protocols bgp 65536 redistribute kernel metric '45' -# set protocols bgp 65536 timers keepalive '35' +# set protocols bgp system-as 65536 +# set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' +# set protocols bgp aggregate-address 203.0.113.0/24 'as-set' +# set protocols bgp maximum-paths ebgp '20' +# set protocols bgp maximum-paths ibgp '55' +# set protocols bgp neighbor 192.0.2.25 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.25 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.25 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' +# set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' +# set protocols bgp neighbor 203.0.113.5 remote-as '101' +# set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' +# set protocols bgp neighbor 5001::64 distribute-list export '20' +# set protocols bgp neighbor 5001::64 distribute-list import '40' +# set protocols bgp neighbor 5001::64 maximum-prefix '34' +# set protocols bgp network 192.1.13.0/24 'backdoor' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters confederation identifier '66' +# set protocols bgp parameters confederation peers '20' +# set protocols bgp parameters confederation peers '55' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters router-id '192.1.2.9' +# set protocols bgp redistribute connected route-map 'map01' +# set protocols bgp redistribute kernel metric '45' +# set protocols bgp timers keepalive '35' # vyos@vyos:~$ - name: Replace vyos.vyos.vyos_bgp_global: config: as_number: "65536" network: - address: "203.0.113.0/24" route_map: map01 redistribute: - protocol: "static" route_map: "map01" neighbor: - address: "192.0.2.40" advertisement_interval: 72 capability: orf: "receive" bgp_params: bestpath: as_path: "confed" state: replaced # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval '72' -# set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list 'receive' -# set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 redistribute static route-map 'map01' +# set protocols bgp system-as 65536 +# set protocols bgp neighbor 192.0.2.40 advertisement-interval '72' +# set protocols bgp neighbor 192.0.2.40 capability orf prefix-list 'receive' +# set protocols bgp network 203.0.113.0/24 route-map 'map01' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed" # } # }, # "neighbor": [ # { # "address": "192.0.2.40", # "advertisement_interval": 72, # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # "before": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "changed": true, # "commands": [ -# "delete protocols bgp 65536 timers", -# "delete protocols bgp 65536 maximum-paths ", -# "delete protocols bgp 65536 maximum-paths ", -# "delete protocols bgp 65536 parameters router-id 192.1.2.9", -# "delete protocols bgp 65536 parameters default", -# "delete protocols bgp 65536 parameters confederation", -# "delete protocols bgp 65536 parameters bestpath compare-routerid", -# "delete protocols bgp 65536 aggregate-address", -# "delete protocols bgp 65536 network 192.1.13.0/24", -# "delete protocols bgp 65536 redistribute kernel", -# "delete protocols bgp 65536 redistribute kernel", -# "delete protocols bgp 65536 redistribute connected", -# "delete protocols bgp 65536 redistribute connected", -# "delete protocols bgp 65536 neighbor 5001::64", -# "delete protocols bgp 65536 neighbor 203.0.113.5", -# "delete protocols bgp 65536 neighbor 192.0.2.25", -# "set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval 72", -# "set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list receive", -# "set protocols bgp 65536 redistribute static route-map map01", -# "set protocols bgp 65536 network 203.0.113.0/24 route-map map01" +# "delete protocols bgp timers", +# "delete protocols bgp maximum-paths ", +# "delete protocols bgp maximum-paths ", +# "delete protocols bgp parameters router-id 192.1.2.9", +# "delete protocols bgp parameters default", +# "delete protocols bgp parameters confederation", +# "delete protocols bgp parameters bestpath compare-routerid", +# "delete protocols bgp aggregate-address", +# "delete protocols bgp network 192.1.13.0/24", +# "delete protocols bgp redistribute kernel", +# "delete protocols bgp redistribute kernel", +# "delete protocols bgp redistribute connected", +# "delete protocols bgp redistribute connected", +# "delete protocols bgp neighbor 5001::64", +# "delete protocols bgp neighbor 203.0.113.5", +# "delete protocols bgp neighbor 192.0.2.25", +# "set protocols bgp neighbor 192.0.2.40 advertisement-interval 72", +# "set protocols bgp neighbor 192.0.2.40 capability orf prefix-list receive", +# "set protocols bgp redistribute static route-map map01", +# "set protocols bgp network 203.0.113.0/24 route-map map01" # ], # Using deleted: # ------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 neighbor 192.0.2.40 advertisement-interval '72' -# set protocols bgp 65536 neighbor 192.0.2.40 capability orf prefix-list 'receive' -# set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 redistribute static route-map 'map01' +# set protocols bgp system-as 65536 +# set protocols bgp neighbor 192.0.2.40 advertisement-interval '72' +# set protocols bgp neighbor 192.0.2.40 capability orf prefix-list 'receive' +# set protocols bgp network 203.0.113.0/24 route-map 'map01' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ - name: Delete configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: deleted # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # set protocols bgp '65536' # vyos@vyos:~$ # # # Module Execution: # # "after": { # "as_number": 65536 # }, # "before": { # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed" # } # }, # "neighbor": [ # { # "address": "192.0.2.40", # "advertisement_interval": 72, # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # "changed": true, # "commands": [ -# "delete protocols bgp 65536 neighbor 192.0.2.40", -# "delete protocols bgp 65536 redistribute", -# "delete protocols bgp 65536 network", -# "delete protocols bgp 65536 parameters" +# "delete protocols bgp neighbor 192.0.2.40", +# "delete protocols bgp redistribute", +# "delete protocols bgp network", +# "delete protocols bgp parameters" # ], # Using purged: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 aggregate-address 192.0.2.0/24 'summary-only' -# set protocols bgp 65536 aggregate-address 203.0.113.0/24 'as-set' -# set protocols bgp 65536 maximum-paths ebgp '20' -# set protocols bgp 65536 maximum-paths ibgp '55' -# set protocols bgp 65536 neighbor 192.0.2.25 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.25 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.25 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'as-path' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'med' -# set protocols bgp 65536 neighbor 203.0.113.5 attribute-unchanged 'next-hop' -# set protocols bgp 65536 neighbor 203.0.113.5 ebgp-multihop '2' -# set protocols bgp 65536 neighbor 203.0.113.5 remote-as '101' -# set protocols bgp 65536 neighbor 203.0.113.5 update-source '192.0.2.25' -# set protocols bgp 65536 neighbor 5001::64 distribute-list export '20' -# set protocols bgp 65536 neighbor 5001::64 distribute-list import '40' -# set protocols bgp 65536 neighbor 5001::64 maximum-prefix '34' -# set protocols bgp 65536 network 192.1.13.0/24 'backdoor' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters confederation identifier '66' -# set protocols bgp 65536 parameters confederation peers '20' -# set protocols bgp 65536 parameters confederation peers '55' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters router-id '192.1.2.9' -# set protocols bgp 65536 redistribute connected route-map 'map01' -# set protocols bgp 65536 redistribute kernel metric '45' -# set protocols bgp 65536 timers keepalive '35' +# set protocols bgp system-as 65536 +# set protocols bgp aggregate-address 192.0.2.0/24 'summary-only' +# set protocols bgp aggregate-address 203.0.113.0/24 'as-set' +# set protocols bgp maximum-paths ebgp '20' +# set protocols bgp maximum-paths ibgp '55' +# set protocols bgp neighbor 192.0.2.25 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.25 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.25 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'as-path' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'med' +# set protocols bgp neighbor 203.0.113.5 attribute-unchanged 'next-hop' +# set protocols bgp neighbor 203.0.113.5 ebgp-multihop '2' +# set protocols bgp neighbor 203.0.113.5 remote-as '101' +# set protocols bgp neighbor 203.0.113.5 update-source '192.0.2.25' +# set protocols bgp neighbor 5001::64 distribute-list export '20' +# set protocols bgp neighbor 5001::64 distribute-list import '40' +# set protocols bgp neighbor 5001::64 maximum-prefix '34' +# set protocols bgp network 192.1.13.0/24 'backdoor' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters confederation identifier '66' +# set protocols bgp parameters confederation peers '20' +# set protocols bgp parameters confederation peers '55' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters router-id '192.1.2.9' +# set protocols bgp redistribute connected route-map 'map01' +# set protocols bgp redistribute kernel metric '45' +# set protocols bgp timers keepalive '35' # vyos@vyos:~$ - name: Purge configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: purged # After state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" # vyos@vyos:~$ # # Module Execution: # # "after": {}, # "before": { # "aggregate_address": [ # { # "prefix": "192.0.2.0/24", # "summary_only": true # }, # { # "prefix": "203.0.113.0/24", # "as_set": true # } # ], # "as_number": 65536, # "bgp_params": { # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "confederation": [ # { # "identifier": 66 # }, # { # "peers": 20 # }, # { # "peers": 55 # } # ], # "default": { # "no_ipv4_unicast": true # }, # "router_id": "192.1.2.9" # }, # "maximum_paths": [ # { # "count": 20, # "path": "ebgp" # }, # { # "count": 55, # "path": "ibgp" # } # ], # "neighbor": [ # { # "address": "192.0.2.25", # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.5", # "attribute_unchanged": { # "as_path": true, # "med": true, # "next_hop": true # }, # "ebgp_multihop": 2, # "remote_as": 101, # "update_source": "192.0.2.25" # }, # { # "address": "5001::64", # "distribute_list": [ # { # "acl": 20, # "action": "export" # }, # { # "acl": 40, # "action": "import" # } # ], # "maximum_prefix": 34 # } # ], # "network": [ # { # "address": "192.1.13.0/24", # "backdoor": true # } # ], # "redistribute": [ # { # "protocol": "connected", # "route_map": "map01" # }, # { # "metric": 45, # "protocol": "kernel" # } # ], # "timers": { # "keepalive": 35 # } # }, # "changed": true, # "commands": [ # "delete protocols bgp 65536" # ], # Deleted in presence of address family under neighbors: # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' -# set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' -# set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' -# set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' -# set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' -# set protocols bgp 65536 parameters 'always-compare-med' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters dampening half-life '33' -# set protocols bgp 65536 parameters dampening max-suppress-time '20' -# set protocols bgp 65536 parameters dampening re-use '60' -# set protocols bgp 65536 parameters dampening start-suppress-time '5' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters distance global external '66' -# set protocols bgp 65536 parameters distance global internal '20' -# set protocols bgp 65536 parameters distance global local '10' -# set protocols bgp 65536 redistribute static route-map 'map01' +# set protocols bgp system-as 65536 +# set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' +# set protocols bgp neighbor 192.0.2.43 capability 'dynamic' +# set protocols bgp neighbor 192.0.2.43 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.43 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.43 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' +# set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' +# set protocols bgp network 203.0.113.0/24 route-map 'map01' +# set protocols bgp parameters 'always-compare-med' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters dampening half-life '33' +# set protocols bgp parameters dampening max-suppress-time '20' +# set protocols bgp parameters dampening re-use '60' +# set protocols bgp parameters dampening start-suppress-time '5' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters distance global external '66' +# set protocols bgp parameters distance global internal '20' +# set protocols bgp parameters distance global local '10' +# set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ ^C # vyos@vyos:~$ - name: Delete configuration vyos.vyos.vyos_bgp_global: config: as_number: "65536" state: deleted # Module Execution: # # "changed": false, # "invocation": { # "module_args": { # "config": { # "aggregate_address": null, # "as_number": 65536, # "bgp_params": null, # "maximum_paths": null, # "neighbor": null, # "network": null, # "redistribute": null, # "timers": null # }, # "running_config": null, # "state": "deleted" # } # }, # "msg": "Use the _bgp_address_family module to delete the address_family under neighbor 203.0.113.0, before replacing/deleting the neighbor." # } # using gathered: # -------------- # Before state: # vyos@vyos:~$ show configuration commands | match "set protocols bgp" -# set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' -# set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' -# set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' -# set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' -# set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' -# set protocols bgp 65536 parameters 'always-compare-med' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters dampening half-life '33' -# set protocols bgp 65536 parameters dampening max-suppress-time '20' -# set protocols bgp 65536 parameters dampening re-use '60' -# set protocols bgp 65536 parameters dampening start-suppress-time '5' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters distance global external '66' -# set protocols bgp 65536 parameters distance global internal '20' -# set protocols bgp 65536 parameters distance global local '10' -# set protocols bgp 65536 redistribute static route-map 'map01' +# set protocols bgp system-as 65536 +# set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' +# set protocols bgp neighbor 192.0.2.43 capability 'dynamic' +# set protocols bgp neighbor 192.0.2.43 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.43 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.43 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' +# set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' +# set protocols bgp network 203.0.113.0/24 route-map 'map01' +# set protocols bgp parameters 'always-compare-med' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters dampening half-life '33' +# set protocols bgp parameters dampening max-suppress-time '20' +# set protocols bgp parameters dampening re-use '60' +# set protocols bgp parameters dampening start-suppress-time '5' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters distance global external '66' +# set protocols bgp parameters distance global internal '20' +# set protocols bgp parameters distance global local '10' +# set protocols bgp redistribute static route-map 'map01' # vyos@vyos:~$ ^C - name: gather configs vyos.vyos.vyos_bgp_global: state: gathered # Module Execution: # "gathered": { # "as_number": 65536, # "bgp_params": { # "always_compare_med": true, # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "default": { # "no_ipv4_unicast": true # }, # "distance": [ # { # "type": "external", # "value": 66 # }, # { # "type": "internal", # "value": 20 # }, # { # "type": "local", # "value": 10 # } # ] # }, # "neighbor": [ # { # "address": "192.0.2.43", # "advertisement_interval": 72, # "capability": { # "dynamic": true # }, # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.0", # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # }, # # Using parsed: # ------------ # parsed.cfg -# set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval '72' -# set protocols bgp 65536 neighbor 192.0.2.43 capability 'dynamic' -# set protocols bgp 65536 neighbor 192.0.2.43 'disable-connected-check' -# set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime '30' -# set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive '10' -# set protocols bgp 65536 neighbor 203.0.113.0 address-family 'ipv6-unicast' -# set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list 'receive' -# set protocols bgp 65536 network 203.0.113.0/24 route-map 'map01' -# set protocols bgp 65536 parameters 'always-compare-med' -# set protocols bgp 65536 parameters bestpath as-path 'confed' -# set protocols bgp 65536 parameters bestpath 'compare-routerid' -# set protocols bgp 65536 parameters dampening half-life '33' -# set protocols bgp 65536 parameters dampening max-suppress-time '20' -# set protocols bgp 65536 parameters dampening re-use '60' -# set protocols bgp 65536 parameters dampening start-suppress-time '5' -# set protocols bgp 65536 parameters default 'no-ipv4-unicast' -# set protocols bgp 65536 parameters distance global external '66' -# set protocols bgp 65536 parameters distance global internal '20' -# set protocols bgp 65536 parameters distance global local '10' -# set protocols bgp 65536 redistribute static route-map 'map01' +# set protocols bgp neighbor 192.0.2.43 advertisement-interval '72' +# set protocols bgp neighbor 192.0.2.43 capability 'dynamic' +# set protocols bgp neighbor 192.0.2.43 'disable-connected-check' +# set protocols bgp neighbor 192.0.2.43 timers holdtime '30' +# set protocols bgp neighbor 192.0.2.43 timers keepalive '10' +# set protocols bgp neighbor 203.0.113.0 address-family 'ipv6-unicast' +# set protocols bgp neighbor 203.0.113.0 capability orf prefix-list 'receive' +# set protocols bgp network 203.0.113.0/24 route-map 'map01' +# set protocols bgp parameters 'always-compare-med' +# set protocols bgp parameters bestpath as-path 'confed' +# set protocols bgp parameters bestpath 'compare-routerid' +# set protocols bgp parameters dampening half-life '33' +# set protocols bgp parameters dampening max-suppress-time '20' +# set protocols bgp parameters dampening re-use '60' +# set protocols bgp parameters dampening start-suppress-time '5' +# set protocols bgp parameters default 'no-ipv4-unicast' +# set protocols bgp parameters distance global external '66' +# set protocols bgp parameters distance global internal '20' +# set protocols bgp parameters distance global local '10' +# set protocols bgp redistribute static route-map 'map01' - name: parse configs vyos.vyos.vyos_bgp_global: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed tags: - parsed # Module execution: # "parsed": { # "as_number": 65536, # "bgp_params": { # "always_compare_med": true, # "bestpath": { # "as_path": "confed", # "compare_routerid": true # }, # "default": { # "no_ipv4_unicast": true # }, # "distance": [ # { # "type": "external", # "value": 66 # }, # { # "type": "internal", # "value": 20 # }, # { # "type": "local", # "value": 10 # } # ] # }, # "neighbor": [ # { # "address": "192.0.2.43", # "advertisement_interval": 72, # "capability": { # "dynamic": true # }, # "disable_connected_check": true, # "timers": { # "holdtime": 30, # "keepalive": 10 # } # }, # { # "address": "203.0.113.0", # "capability": { # "orf": "receive" # } # } # ], # "network": [ # { # "address": "203.0.113.0/24", # "route_map": "map01" # } # ], # "redistribute": [ # { # "protocol": "static", # "route_map": "map01" # } # ] # } # # Using rendered: # -------------- - name: Render vyos.vyos.vyos_bgp_global: config: as_number: "65536" network: - address: "203.0.113.0/24" route_map: map01 redistribute: - protocol: "static" route_map: "map01" bgp_params: always_compare_med: true dampening: start_suppress_time: 5 max_suppress_time: 20 half_life: 33 re_use: 60 distance: - type: "internal" value: 20 - type: "local" value: 10 - type: "external" value: 66 bestpath: as_path: "confed" compare_routerid: true default: no_ipv4_unicast: true neighbor: - address: "192.0.2.43" disable_connected_check: true advertisement_interval: 72 capability: dynamic: true timers: holdtime: 30 keepalive: 10 - address: "203.0.113.0" capability: orf: "receive" state: rendered # Module Execution: # "rendered": [ -# "set protocols bgp 65536 neighbor 192.0.2.43 disable-connected-check", -# "set protocols bgp 65536 neighbor 192.0.2.43 advertisement-interval 72", -# "set protocols bgp 65536 neighbor 192.0.2.43 capability dynamic", -# "set protocols bgp 65536 neighbor 192.0.2.43 timers holdtime 30", -# "set protocols bgp 65536 neighbor 192.0.2.43 timers keepalive 10", -# "set protocols bgp 65536 neighbor 203.0.113.0 capability orf prefix-list receive", -# "set protocols bgp 65536 redistribute static route-map map01", -# "set protocols bgp 65536 network 203.0.113.0/24 route-map map01", -# "set protocols bgp 65536 parameters always-compare-med", -# "set protocols bgp 65536 parameters dampening half-life 33", -# "set protocols bgp 65536 parameters dampening max-suppress-time 20", -# "set protocols bgp 65536 parameters dampening re-use 60", -# "set protocols bgp 65536 parameters dampening start-suppress-time 5", -# "set protocols bgp 65536 parameters distance global internal 20", -# "set protocols bgp 65536 parameters distance global local 10", -# "set protocols bgp 65536 parameters distance global external 66", -# "set protocols bgp 65536 parameters bestpath as-path confed", -# "set protocols bgp 65536 parameters bestpath compare-routerid", -# "set protocols bgp 65536 parameters default no-ipv4-unicast" +# "set protocols bgp neighbor 192.0.2.43 disable-connected-check", +# "set protocols bgp neighbor 192.0.2.43 advertisement-interval 72", +# "set protocols bgp neighbor 192.0.2.43 capability dynamic", +# "set protocols bgp neighbor 192.0.2.43 timers holdtime 30", +# "set protocols bgp neighbor 192.0.2.43 timers keepalive 10", +# "set protocols bgp neighbor 203.0.113.0 capability orf prefix-list receive", +# "set protocols bgp redistribute static route-map map01", +# "set protocols bgp network 203.0.113.0/24 route-map map01", +# "set protocols bgp parameters always-compare-med", +# "set protocols bgp parameters dampening half-life 33", +# "set protocols bgp parameters dampening max-suppress-time 20", +# "set protocols bgp parameters dampening re-use 60", +# "set protocols bgp parameters dampening start-suppress-time 5", +# "set protocols bgp parameters distance global internal 20", +# "set protocols bgp parameters distance global local 10", +# "set protocols bgp parameters distance global external 66", +# "set protocols bgp parameters bestpath as-path confed", +# "set protocols bgp parameters bestpath compare-routerid", +# "set protocols bgp parameters default no-ipv4-unicast" # ] """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: - - set protocols bgp 65536 redistribute static route-map map01 - - set protocols bgp 65536 network 203.0.113.0/24 route-map map01 - - set protocols bgp 65536 parameters always-compare-med + - set protocols bgp redistribute static route-map map01 + - set protocols bgp network 203.0.113.0/24 route-map map01 + - set protocols bgp parameters always-compare-med rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - - set protocols bgp 65536 redistribute static route-map map01 - - set protocols bgp 65536 network 203.0.113.0/24 route-map map01 - - set protocols bgp 65536 parameters always-compare-med + - set protocols bgp redistribute static route-map map01 + - set protocols bgp network 203.0.113.0/24 route-map map01 + - set protocols bgp parameters always-compare-med gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.bgp_global.bgp_global import ( Bgp_globalArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.bgp_global.bgp_global import ( Bgp_global, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ module = AnsibleModule( argument_spec=Bgp_globalArgs.argument_spec, mutually_exclusive=[["config", "running_config"]], required_if=[ ["state", "merged", ["config"]], ["state", "replaced", ["config"]], ["state", "overridden", ["config"]], ["state", "rendered", ["config"]], ["state", "parsed", ["running_config"]], ], supports_check_mode=True, ) result = Bgp_global(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_command.py b/plugins/modules/vyos_command.py index bacbe26a..766370c2 100644 --- a/plugins/modules/vyos_command.py +++ b/plugins/modules/vyos_command.py @@ -1,228 +1,228 @@ #!/usr/bin/python # # This file is part of Ansible # # Ansible is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # Ansible is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with Ansible. If not, see . # from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_command author: Nathaniel Case (@Qalthos) short_description: Run one or more commands on VyOS devices description: - The command module allows running one or more commands on remote devices running VyOS. This module can also be introspected to validate key parameters before returning successfully. If the conditional statements are not met in the wait period, the task fails. - Certain C(show) commands in VyOS produce many lines of output and use a custom pager that can cause this module to hang. If the value of the environment variable C(ANSIBLE_VYOS_TERMINAL_LENGTH) is not set, the default number of 10000 is used. version_added: 1.0.0 extends_documentation_fragment: - vyos.vyos.vyos options: commands: description: - The ordered set of commands to execute on the remote device running VyOS. The output from the command execution is returned to the playbook. If the I(wait_for) argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded. - If a command sent to the device requires answering a prompt, it is possible to pass a dict containing command, answer and prompt. Common answers are 'y' or "\\r" (carriage return, must be double quotes). Refer below examples. required: true type: list elements: raw wait_for: description: - Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured I(retries), the task fails. See examples. type: list elements: str aliases: - waitfor match: description: - The I(match) argument is used in conjunction with the I(wait_for) argument to specify the match policy. Valid values are C(all) or C(any). If the value is set to C(all) then all conditionals in the wait_for must be satisfied. If the value is set to C(any) then only one of the values must be satisfied. default: all type: str choices: - any - all retries: description: - Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the I(wait_for) conditionals. - The commands are run once when I(retries) is set to C(0). default: 9 type: int interval: description: - Configures the interval in seconds to wait between I(retries) of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again. default: 1 type: int notes: -- Tested against VyOS 1.1.8 (helium). +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - Running C(show system boot-messages all) will cause the module to hang since VyOS is using a custom pager setting to display the output of that command. - If a command sent to the device requires answering a prompt, it is possible to pass a dict containing I(command), I(answer) and I(prompt). See examples. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). """ EXAMPLES = """ - name: show configuration on ethernet devices eth0 and eth1 vyos.vyos.vyos_command: commands: - show interfaces ethernet {{ item }} with_items: - eth0 - eth1 - name: run multiple commands and check if version output contains specific version string vyos.vyos.vyos_command: commands: - show version - show hardware cpu wait_for: - result[0] contains 'VyOS 1.1.7' - name: run command that requires answering a prompt vyos.vyos.vyos_command: commands: - command: rollback 1 prompt: Proceed with reboot? [confirm][y] answer: y """ RETURN = """ stdout: description: The set of responses from the commands returned: always apart from low level errors (such as action plugin) type: list sample: ['...', '...'] stdout_lines: description: The value of stdout split into a list returned: always type: list sample: [['...', '...'], ['...'], ['...']] failed_conditions: description: The list of conditionals that have failed returned: failed type: list sample: ['...', '...'] warnings: description: The list of warnings (if any) generated by module based on arguments returned: always type: list sample: ['...', '...'] """ import time from ansible.module_utils._text import to_text from ansible.module_utils.basic import AnsibleModule from ansible_collections.ansible.netcommon.plugins.module_utils.network.common.parsing import ( Conditional, ) from ansible_collections.ansible.netcommon.plugins.module_utils.network.common.utils import ( to_lines, transform_commands, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import run_commands def parse_commands(module, warnings): commands = transform_commands(module) if module.check_mode: for item in list(commands): if not item["command"].startswith("show"): warnings.append( "Only show commands are supported when using check mode, not " "executing %s" % item["command"], ) commands.remove(item) return commands def main(): spec = dict( commands=dict(type="list", required=True, elements="raw"), wait_for=dict(type="list", aliases=["waitfor"], elements="str"), match=dict(default="all", choices=["all", "any"]), retries=dict(default=9, type="int"), interval=dict(default=1, type="int"), ) module = AnsibleModule(argument_spec=spec, supports_check_mode=True) warnings = list() result = {"changed": False, "warnings": warnings} commands = parse_commands(module, warnings) wait_for = module.params["wait_for"] or list() conditionals = [] try: conditionals = [Conditional(c) for c in wait_for] except AttributeError as exc: module.fail_json(msg=to_text(exc)) retries = module.params["retries"] interval = module.params["interval"] match = module.params["match"] # Always run at least once, and then `retries` more times. for item in range(retries + 1): responses = run_commands(module, commands) for item in list(conditionals): if item(responses): if match == "any": conditionals = list() break conditionals.remove(item) if not conditionals: break time.sleep(interval) if conditionals: failed_conditions = [item.raw for item in conditionals] msg = "One or more conditional statements have not been satisfied" module.fail_json(msg=msg, failed_conditions=failed_conditions) result.update({"stdout": responses, "stdout_lines": list(to_lines(responses))}) module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_config.py b/plugins/modules/vyos_config.py index c6bc9959..eeb6bc44 100644 --- a/plugins/modules/vyos_config.py +++ b/plugins/modules/vyos_config.py @@ -1,388 +1,388 @@ #!/usr/bin/python # # This file is part of Ansible # # Ansible is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # Ansible is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with Ansible. If not, see . # from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_config author: Nathaniel Case (@Qalthos) short_description: Manage VyOS configuration on remote device description: - This module provides configuration file management of VyOS devices. It provides arguments for managing both the configuration file and state of the active configuration. All configuration statements are based on `set` and `delete` commands in the device configuration. version_added: 1.0.0 extends_documentation_fragment: - vyos.vyos.vyos notes: -- Tested against VyOS 1.1.8 (helium). +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). - To ensure idempotency and correct diff the configuration lines in the relevant module options should be similar to how they appear if present in the running configuration on device including the indentation. options: lines: description: - The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config as found in the device running-config to ensure idempotency and correct diff. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. type: list elements: str src: description: - The C(src) argument specifies the path to the source config file to load. The source config file can either be in bracket format or set format. The source file can include Jinja2 template variables. The configuration lines in the source file should be similar to how it will appear if present in the running-configuration of the device including indentation to ensure idempotency and correct diff. type: path match: description: - The C(match) argument controls the method used to match against the current active configuration. By default, the desired config is matched against the active config and the deltas are loaded. If the C(match) argument is set to C(none) the active configuration is ignored and the configuration is always loaded. type: str default: line choices: - line - none backup: description: - The C(backup) argument will backup the current devices active configuration to the Ansible control host prior to making any changes. If the C(backup_options) value is not given, the backup file will be located in the backup folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created. type: bool default: no comment: description: - Allows a commit description to be specified to be included when the configuration is committed. If the configuration is not changed or committed, this argument is ignored. default: configured by vyos_config type: str config: description: - The C(config) argument specifies the base configuration to use to compare against the desired configuration. If this value is not specified, the module will automatically retrieve the current active configuration from the remote device. The configuration lines in the option value should be similar to how it will appear if present in the running-configuration of the device including indentation to ensure idempotency and correct diff. type: str save: description: - The C(save) argument controls whether or not changes made to the active configuration are saved to disk. This is independent of committing the config. When set to True, the active configuration is saved. type: bool default: no backup_options: description: - This is a dict object containing configurable options related to backup file path. The value of this option is read only when C(backup) is set to I(yes), if C(backup) is set to I(no) this option will be silently ignored. suboptions: filename: description: - The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by _config.@ type: str dir_path: description: - This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of C(filename) or default filename as described in C(filename) options description. If the path value is not given in that case a I(backup) directory will be created in the current working directory and backup configuration will be copied in C(filename) within I(backup) directory. type: path type: dict """ EXAMPLES = """ - name: configure the remote device vyos.vyos.vyos_config: lines: - set system host-name {{ inventory_hostname }} - set service lldp - delete service dhcp-server - name: backup and load from file vyos.vyos.vyos_config: src: vyos.cfg backup: true - name: render a Jinja2 template onto the VyOS router vyos.vyos.vyos_config: src: vyos_template.j2 - name: for idempotency, use full-form commands vyos.vyos.vyos_config: lines: # - set int eth eth2 description 'OUTSIDE' - set interface ethernet eth2 description 'OUTSIDE' - name: configurable backup path vyos.vyos.vyos_config: backup: true backup_options: filename: backup.cfg dir_path: /home/user """ RETURN = """ commands: description: The list of configuration commands sent to the device returned: always type: list sample: ['...', '...'] filtered: description: The list of configuration commands removed to avoid a load failure returned: always type: list sample: ['...', '...'] backup_path: description: The full path to the backup file returned: when backup is yes type: str sample: /playbooks/ansible/backup/vyos_config.2016-07-16@22:28:34 filename: description: The name of the backup file returned: when backup is yes and filename is not specified in backup options type: str sample: vyos_config.2016-07-16@22:28:34 shortname: description: The full path to the backup file excluding the timestamp returned: when backup is yes and filename is not specified in backup options type: str sample: /playbooks/ansible/backup/vyos_config date: description: The date extracted from the backup file name returned: when backup is yes type: str sample: "2016-07-16" time: description: The time extracted from the backup file name returned: when backup is yes type: str sample: "22:28:34" """ import re from ansible.module_utils._text import to_text from ansible.module_utils.basic import AnsibleModule from ansible.module_utils.connection import ConnectionError from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import ( get_config, get_connection, load_config, run_commands, ) DEFAULT_COMMENT = "configured by vyos_config" CONFIG_FILTERS = [ re.compile(r"set system login user \S+ authentication encrypted-password"), ] def get_candidate(module): contents = module.params["src"] or module.params["lines"] if module.params["src"]: contents = contents.splitlines() if len(contents) > 0: line = contents[0].split() if len(line) > 0 and line[0] in ("set", "delete"): contents = format_commands(contents) contents = "\n".join(contents) return contents def format_commands(commands): """ This function format the input commands and removes the prepend white spaces for command lines having 'set' or 'delete' and it skips empty lines. :param commands: :return: list of commands """ return [ line.strip() if line.split()[0] in ("set", "delete") else line for line in commands if len(line.strip()) > 0 ] def diff_config(commands, config): config = [str(c).replace("'", "") for c in config.splitlines()] updates = list() visited = set() for line in commands: item = str(line).replace("'", "") if not item.startswith("set") and not item.startswith("delete"): raise ValueError("line must start with either `set` or `delete`") elif item.startswith("set") and item not in config: updates.append(line) elif item.startswith("delete"): if not config: updates.append(line) else: item = re.sub(r"delete", "set", item) for entry in config: if entry.startswith(item) and line not in visited: updates.append(line) visited.add(line) return list(updates) def sanitize_config(config, result): result["filtered"] = list() index_to_filter = list() for regex in CONFIG_FILTERS: for index, line in enumerate(list(config)): if regex.search(line): result["filtered"].append(line) index_to_filter.append(index) # Delete all filtered configs for filter_index in sorted(index_to_filter, reverse=True): del config[filter_index] def run(module, result): # get the current active config from the node or passed in via # the config param config = module.params["config"] or get_config(module) # create the candidate config object from the arguments candidate = get_candidate(module) # create loadable config that includes only the configuration updates connection = get_connection(module) try: response = connection.get_diff( candidate=candidate, running=config, diff_match=module.params["match"], ) except ConnectionError as exc: module.fail_json(msg=to_text(exc, errors="surrogate_then_replace")) commands = response.get("config_diff") sanitize_config(commands, result) result["commands"] = commands commit = not module.check_mode comment = module.params["comment"] diff = None if commands: diff = load_config(module, commands, commit=commit, comment=comment) if result.get("filtered"): result["warnings"].append( "Some configuration commands were removed, please see the filtered key", ) result["changed"] = True if module._diff: result["diff"] = {"prepared": diff} def main(): backup_spec = dict(filename=dict(), dir_path=dict(type="path")) argument_spec = dict( src=dict(type="path"), lines=dict(type="list", elements="str"), match=dict(default="line", choices=["line", "none"]), comment=dict(default=DEFAULT_COMMENT), config=dict(), backup=dict(type="bool", default=False), backup_options=dict(type="dict", options=backup_spec), save=dict(type="bool", default=False), ) mutually_exclusive = [("lines", "src")] module = AnsibleModule( argument_spec=argument_spec, mutually_exclusive=mutually_exclusive, supports_check_mode=True, ) warnings = list() result = dict(changed=False, warnings=warnings) if module.params["backup"]: result["__backup__"] = get_config(module=module) if any((module.params["src"], module.params["lines"])): run(module, result) if module.params["save"]: diff = run_commands(module, commands=["configure", "compare saved"])[1] if diff not in { "[edit]", "No changes between working and saved configurations.\n\n[edit]", }: if not module.check_mode: run_commands(module, commands=["save"]) result["changed"] = True run_commands(module, commands=["exit"]) if result.get("changed") and any((module.params["src"], module.params["lines"])): msg = ( "To ensure idempotency and correct diff the input configuration lines should be" " similar to how they appear if present in" " the running configuration on device" ) if module.params["src"]: msg += " including the indentation" if "warnings" in result: result["warnings"].append(msg) else: result["warnings"] = msg module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_facts.py b/plugins/modules/vyos_facts.py index a999bd31..abc3c707 100644 --- a/plugins/modules/vyos_facts.py +++ b/plugins/modules/vyos_facts.py @@ -1,177 +1,177 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) from __future__ import absolute_import, division, print_function __metaclass__ = type """ The module file for vyos_facts """ DOCUMENTATION = """ module: vyos_facts short_description: Get facts about vyos devices. description: - Collects facts from network devices running the vyos operating system. This module places the facts gathered in the fact tree keyed by the respective resource name. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts. version_added: 1.0.0 author: - Nathaniel Case (@qalthos) - Nilashish Chakraborty (@Nilashishc) - Rohit Thakur (@rohitthakur2590) extends_documentation_fragment: - vyos.vyos.vyos notes: -- Tested against VyOS 1.1.8 (helium). +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). options: gather_subset: description: - When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include C(all), C(default), C(config), C(neighbors) and C(min). Can specify a list of values to include a larger subset. Values can also be used with an initial C(!) to specify that a specific subset should not be collected. required: false default: 'min' type: list elements: str gather_network_resources: description: - When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all and the resources like interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial C(!) to specify that a specific subset should not be collected. Valid subsets are 'all', 'interfaces', 'l3_interfaces', 'lag_interfaces', 'lldp_global', 'lldp_interfaces', 'static_routes', 'firewall_rules', 'firewall_global', 'firewall_interfaces', 'ospfv3', 'ospfv2'. required: false type: list elements: str available_network_resources: description: When 'True' a list of network resources for which resource modules are available will be provided. type: bool default: false """ EXAMPLES = """ # Gather all facts - vyos.vyos.vyos_facts: gather_subset: all gather_network_resources: all # collect only the config and default facts - vyos.vyos.vyos_facts: gather_subset: config # collect everything exception the config - vyos.vyos.vyos_facts: gather_subset: '!config' # Collect only the interfaces facts - vyos.vyos.vyos_facts: gather_subset: - '!all' - '!min' gather_network_resources: - interfaces # Do not collect interfaces facts - vyos.vyos.vyos_facts: gather_network_resources: - '!interfaces' # Collect interfaces and minimal default facts - vyos.vyos.vyos_facts: gather_subset: min gather_network_resources: interfaces """ RETURN = """ ansible_net_config: description: The running-config from the device returned: when config is configured type: str ansible_net_commits: description: The set of available configuration revisions returned: when present type: list ansible_net_hostname: description: The configured system hostname returned: always type: str ansible_net_model: description: The device model string returned: always type: str ansible_net_serialnum: description: The serial number of the device returned: always type: str ansible_net_version: description: The version of the software running returned: always type: str ansible_net_neighbors: description: The set of LLDP neighbors returned: when interface is configured type: list ansible_net_gather_subset: description: The list of subsets gathered by the module returned: always type: list ansible_net_api: description: The name of the transport returned: always type: str ansible_net_python_version: description: The Python version Ansible controller is using returned: always type: str ansible_net_gather_network_resources: description: The list of fact resource subsets collected from the device returned: always type: list """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.facts.facts import ( FactsArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.facts.facts import ( FACT_RESOURCE_SUBSETS, Facts, ) def main(): """ Main entry point for module execution :returns: ansible_facts """ argument_spec = FactsArgs.argument_spec module = AnsibleModule(argument_spec=argument_spec, supports_check_mode=True) warnings = [] ansible_facts = {} if module.params.get("available_network_resources"): ansible_facts["available_network_resources"] = sorted(FACT_RESOURCE_SUBSETS.keys()) result = Facts(module).get_facts() additional_facts, additional_warnings = result ansible_facts.update(additional_facts) warnings.extend(additional_warnings) module.exit_json(ansible_facts=ansible_facts, warnings=warnings) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_firewall_global.py b/plugins/modules/vyos_firewall_global.py index e952ae50..50f92e91 100644 --- a/plugins/modules/vyos_firewall_global.py +++ b/plugins/modules/vyos_firewall_global.py @@ -1,1287 +1,1288 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_firewall_global """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_firewall_global short_description: Firewall global resource module description: - This module manage global policies or configurations for firewall on VyOS devices. version_added: '1.0.0' notes: -- Tested against VyOS 1.3.8. +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. +- The provided examples of commands are valid for VyOS 1.4+ - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). author: - Rohit Thakur (@rohitthakur2590) options: config: description: - A dictionary of Firewall global configuration options. type: dict suboptions: route_redirects: description: - A dictionary of Firewall ICMP redirect and source route global configuration options. type: list elements: dict suboptions: afi: description: - Specifies IP address type type: str choices: - ipv4 - ipv6 required: true icmp_redirects: description: - Specifies whether to allow sending/receiving of IPv4/v6 ICMP redirect messages. type: dict suboptions: send: description: - Permits or denies transmitting packets ICMP redirect messages. type: bool receive: description: - Permits or denies receiving packets ICMP redirect messages. type: bool ip_src_route: description: - Specifies whether or not to process source route IP options. type: bool ping: description: - Policy for handling of all IPv4 ICMP echo requests. type: dict suboptions: all: description: - Enables or disables response to all IPv4 ICMP Echo Request (ping) messages. - The system responds to IPv4 ICMP Echo Request messages. type: bool broadcast: description: - Enables or disables response to broadcast IPv4 ICMP Echo Request and Timestamp Request messages. - IPv4 ICMP Echo and Timestamp Request messages are not processed. type: bool config_trap: description: - SNMP trap generation on firewall configuration changes. type: bool validation: description: - Specifies a policy for source validation by reversed path, as defined in RFC 3704. - (disable) No source validation is performed. - (loose) Enable Loose Reverse Path Forwarding as defined in RFC3704. - (strict) Enable Strict Reverse Path Forwarding as defined in RFC3704. type: str choices: - strict - loose - disable group: description: - Defines a group of objects for referencing in firewall rules. type: dict suboptions: address_group: description: - Defines a group of IP addresses for referencing in firewall rules. type: list elements: dict suboptions: afi: description: - Specifies IP address type type: str default: ipv4 choices: - ipv4 - ipv6 required: false name: description: - Name of the firewall address group. type: str required: true description: description: - Allows you to specify a brief description for the address group. type: str members: description: - Address-group members. - IPv4 address to match. - IPv4 range to match. type: list elements: dict suboptions: address: description: - IP address. type: str network_group: description: - Defines a group of networks for referencing in firewall rules. type: list elements: dict suboptions: afi: description: - Specifies network address type type: str default: ipv4 choices: - ipv4 - ipv6 required: false name: description: - Name of the firewall network group. type: str required: true description: description: - Allows you to specify a brief description for the network group. type: str members: description: - Adds an IPv4 network to the specified network group. - The format is ip-address/prefix. type: list elements: dict suboptions: address: description: - IP address. type: str port_group: description: - Defines a group of ports for referencing in firewall rules. type: list elements: dict suboptions: name: description: - Name of the firewall port group. type: str required: true description: description: - A brief description for the port group. type: str members: description: - Port-group member. type: list elements: dict suboptions: port: description: - Specified port. type: str log_martians: description: - Specifies whether or not to record packets with invalid addresses in the log. - (True) Logs packets with invalid addresses. - (False) Does not log packets with invalid addresses. type: bool syn_cookies: description: - Specifies policy for using TCP SYN cookies with IPv4. - (True) Enables TCP SYN cookies with IPv4. - (False) Disables TCP SYN cookies with IPv4. type: bool twa_hazards_protection: description: - RFC1337 TCP TIME-WAIT assassination hazards protection. type: bool state_policy: description: - Specifies global firewall state-policy. type: list elements: dict suboptions: connection_type: description: - Specifies connection type. type: str choices: - established - invalid - related action: description: - Action for packets part of an established connection. type: str choices: - accept - drop - reject log: description: - Enable logging of packets part of an established connection. type: bool log_level: description: - Specify log level for packets logged. - Only available in 1.4+ type: str choices: - emerg - alert - crit - err - warn - notice - info - debug running_config: description: - > The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The I(running_config) argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command C(show configuration commands | grep 'firewall') type: str state: description: - The state the configuration should be left in. type: str choices: - merged - replaced - deleted - gathered - rendered - parsed default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep firewall # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: all: true broadcast: true state_policy: - connection_type: established action: accept log: true log_level: emerg - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: send: true receive: false group: address_group: - name: MGMT-HOSTS description: This group has the Management hosts address list members: - address: 192.0.1.1 - address: 192.0.1.3 - address: 192.0.1.5 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ # "set firewall group address-group MGMT-HOSTS address 192.0.1.1", # "set firewall group address-group MGMT-HOSTS address 192.0.1.3", # "set firewall group address-group MGMT-HOSTS address 192.0.1.5", # "set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list'", # "set firewall group address-group MGMT-HOSTS", # "set firewall group network-group MGMT network 192.0.1.0/24", # "set firewall group network-group MGMT description 'This group has the Management network addresses'", # "set firewall group network-group MGMT", # "set firewall global-options ip-src-route 'enable'", # "set firewall global-options receive-redirects 'disable'", # "set firewall global-options send-redirects 'enable'", # "set firewall global-options config-trap 'enable'", # "set firewall global-options state-policy established action 'accept'", -# "set firewall global-options state-policy established log 'enable'", +# "set firewall global-options state-policy established log, # "set firewall global-options state-policy established log-level 'emerg'", # "set firewall global-options state-policy invalid action 'reject'", # "set firewall global-options broadcast-ping 'enable'", # "set firewall global-options all-ping 'enable'", # "set firewall global-options log-martians 'enable'", # "set firewall global-options twa-hazards-protection 'enable'", # "set firewall global-options syn-cookies 'enable'", # "set firewall global-options source-validation 'strict'" # ] # # "after": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # # # Using parsed # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_global: running_config: | set firewall global-options all-ping 'enable' set firewall global-options broadcast-ping 'enable' set firewall global-options config-trap 'enable' set firewall global-options ip-src-route 'enable' set firewall global-options log-martians 'enable' set firewall global-options receive-redirects 'disable' set firewall global-options send-redirects 'enable' set firewall global-options source-validation 'strict' set firewall global-options state-policy established action 'accept' set firewall global-options state-policy established log 'enable' set firewall global-options state-policy invalid action 'reject' set firewall global-options syn-cookies 'enable' set firewall global-options twa-hazards-protection 'enable'" set firewall group address-group ENG-HOSTS address '192.0.3.1' set firewall group address-group ENG-HOSTS address '192.0.3.2' set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' set firewall group address-group SALES-HOSTS address '192.0.2.1' set firewall group address-group SALES-HOSTS address '192.0.2.2' set firewall group address-group SALES-HOSTS address '192.0.2.3' set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' set firewall group network-group MGMT description 'This group has the Management network addresses' set firewall group network-group MGMT network '192.0.1.0/24' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # } # # # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Delete attributes of firewall. vyos.vyos.vyos_firewall_global: config: state_policy: config_trap: log_martians: syn_cookies: twa_hazards_protection: route_redirects: ping: group: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # "commands": [ # "delete firewall global-options source-validation", # "delete firewall global-options group", # "delete firewall global-options log-martians", # "delete firewall global-options ip-src-route", # "delete firewall global-options receive-redirects", # "delete firewall global-options send-redirects", # "delete firewall global-options config-trap", # "delete firewall global-options state-policy", # "delete firewall global-options syn-cookies", # "delete firewall global-options broadcast-ping", # "delete firewall global-options all-ping", # "delete firewall global-options twa-hazards-protection" # ] # # "after": [] # # After state # ------------ # vyos@192# run show configuration commands | grep firewall # set 'firewall' # # # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group MGMT-HOSTS address '192.0.1.1' # set firewall group address-group MGMT-HOSTS address '192.0.1.3' # set firewall group address-group MGMT-HOSTS address '192.0.1.5' # set firewall group address-group MGMT-HOSTS description 'This group has the Management hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Replace firewall global attributes configuration. vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: null all: true broadcast: true state_policy: - connection_type: established action: accept log: true - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: send: true receive: false group: address_group: - name: SALES-HOSTS description: Sales office hosts address list members: - address: 192.0.2.1 - address: 192.0.2.2 - address: 192.0.2.3 - name: ENG-HOSTS description: Sales office hosts address list members: - address: 192.0.3.1 - address: 192.0.3.2 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "This group has the Management hosts address list", # "members": [ # { # "address": "192.0.1.1" # }, # { # "address": "192.0.1.3" # }, # { # "address": "192.0.1.5" # } # ], # "name": "MGMT-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # "commands": [ # "delete firewall group address-group MGMT-HOSTS", # "set firewall group address-group SALES-HOSTS address 192.0.2.1", # "set firewall group address-group SALES-HOSTS address 192.0.2.2", # "set firewall group address-group SALES-HOSTS address 192.0.2.3", # "set firewall group address-group SALES-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group SALES-HOSTS", # "set firewall group address-group ENG-HOSTS address 192.0.3.1", # "set firewall group address-group ENG-HOSTS address 192.0.3.2", # "set firewall group address-group ENG-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group ENG-HOSTS" # ] # # "after": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # # # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' - name: Gather firewall global config with provided configurations vyos.vyos.vyos_firewall_global: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep firewall # set firewall global-options all-ping 'enable' # set firewall global-options broadcast-ping 'enable' # set firewall global-options config-trap 'enable' # set firewall global-options ip-src-route 'enable' # set firewall global-options log-martians 'enable' # set firewall global-options receive-redirects 'disable' # set firewall global-options send-redirects 'enable' # set firewall global-options source-validation 'strict' # set firewall global-options state-policy established action 'accept' # set firewall global-options state-policy established log 'enable' # set firewall global-options state-policy invalid action 'reject' # set firewall global-options syn-cookies 'enable' # set firewall global-options twa-hazards-protection 'enable' # set firewall group address-group ENG-HOSTS address '192.0.3.1' # set firewall group address-group ENG-HOSTS address '192.0.3.2' # set firewall group address-group ENG-HOSTS description 'Sales office hosts address list' # set firewall group address-group SALES-HOSTS address '192.0.2.1' # set firewall group address-group SALES-HOSTS address '192.0.2.2' # set firewall group address-group SALES-HOSTS address '192.0.2.3' # set firewall group address-group SALES-HOSTS description 'Sales office hosts address list' # set firewall group network-group MGMT description 'This group has the Management network addresses' # set firewall group network-group MGMT network '192.0.1.0/24' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_global: config: validation: strict config_trap: true log_martians: true syn_cookies: true twa_hazards_protection: true ping: null all: true broadcast: true state_policy: - connection_type: established action: accept log: true - connection_type: invalid action: reject route_redirects: - afi: ipv4 ip_src_route: true icmp_redirects: null send: true receive: false group: address_group: - name: SALES-HOSTS description: Sales office hosts address list members: - address: 192.0.2.1 - address: 192.0.2.2 - address: 192.0.2.3 - name: ENG-HOSTS description: Sales office hosts address list members: - address: 192.0.3.1 - address: 192.0.3.2 network_group: - name: MGMT description: This group has the Management network addresses members: - address: 192.0.1.0/24 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set firewall group address-group SALES-HOSTS address 192.0.2.1", # "set firewall group address-group SALES-HOSTS address 192.0.2.2", # "set firewall group address-group SALES-HOSTS address 192.0.2.3", # "set firewall group address-group SALES-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group SALES-HOSTS", # "set firewall group address-group ENG-HOSTS address 192.0.3.1", # "set firewall group address-group ENG-HOSTS address 192.0.3.2", # "set firewall group address-group ENG-HOSTS description 'Sales office hosts address list'", # "set firewall group address-group ENG-HOSTS", # "set firewall group network-group MGMT network 192.0.1.0/24", # "set firewall group network-group MGMT description 'This group has the Management network addresses'", # "set firewall group network-group MGMT", # "set firewall global-options ip-src-route 'enable'", # "set firewall global-options receive-redirects 'disable'", # "set firewall global-options send-redirects 'enable'", # "set firewall global-options config-trap 'enable'", # "set firewall global-options state-policy established action 'accept'", -# "set firewall global-options state-policy established log 'enable'", +# "set firewall global-options state-policy established log, # "set firewall global-options state-policy invalid action 'reject'", # "set firewall global-options broadcast-ping 'enable'", # "set firewall global-options all-ping 'enable'", # "set firewall global-options log-martians 'enable'", # "set firewall global-options twa-hazards-protection 'enable'", # "set firewall global-options syn-cookies 'enable'", # "set firewall global-options source-validation 'strict'" # ] # """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - "set firewall group address-group ENG-HOSTS" - "set firewall group address-group ENG-HOSTS address 192.0.3.1" rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - "set firewall group address-group ENG-HOSTS" - "set firewall group address-group ENG-HOSTS address 192.0.3.1" gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.firewall_global.firewall_global import ( Firewall_globalArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.firewall_global.firewall_global import ( Firewall_global, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Firewall_globalArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Firewall_global(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_firewall_rules.py b/plugins/modules/vyos_firewall_rules.py index 850299ff..a7e58e23 100644 --- a/plugins/modules/vyos_firewall_rules.py +++ b/plugins/modules/vyos_firewall_rules.py @@ -1,1685 +1,1674 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_firewall_rules """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_firewall_rules version_added: '1.0.0' short_description: Firewall rules resource module description: This module manages firewall rule-set attributes on VyOS devices author: - Rohit Thakur (@rohitthakur2590) - Gaige B. Paulsen (@gaige) notes: -- Tested against VyOS 1.3.8. +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. +- The provided examples of commands are valid for VyOS 1.4+ - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). options: config: description: A dictionary of Firewall rule-set options. type: list elements: dict suboptions: afi: description: - Specifies the type of rule-set. type: str choices: - ipv4 - ipv6 required: true rule_sets: description: - The Firewall rule-set list. type: list elements: dict suboptions: filter: description: - Filter type (exclusive to "name"). - Supported in 1.4 and later. type: str choices: ['input', 'output', 'forward'] name: description: - Firewall rule set name. - Required for 1.3- and optional for 1.4+. type: str default_action: description: - Default action for rule-set. - drop (Drop if no prior rules are hit (default)) - reject (Drop and notify source if no prior rules are hit) - accept (Accept if no prior rules are hit) - jump (Jump to another rule-set, 1.4+) type: str choices: ['drop', 'reject', 'accept', 'jump'] default_jump_target: description: - Default jump target if the default action is jump. - Only valid in 1.4 and later. - Only valid when default_action = jump. type: str description: description: - Rule set description. type: str enable_default_log: description: - Option to log packets hitting default-action. type: bool rules: description: - A dictionary that specifies the rule-set configurations. type: list elements: dict suboptions: number: description: - Rule number. type: int required: true description: description: - Description of this rule. type: str action: description: - Specifying the action. - inspect is available < 1.4 - continue, return, jump, queue, synproxy are available >= 1.4 type: str choices: - drop - reject - accept - inspect - continue - return - jump - queue - synproxy destination: description: - Specifying the destination parameters. type: dict suboptions: address: description: - Destination ip address subnet or range. - IPv4/6 address, subnet or range to match. - Match everything except the specified address, subnet or range. - Destination ip address subnet or range. type: str group: description: - Destination group. type: dict suboptions: address_group: description: - Group of addresses. type: str network_group: description: - Group of networks. type: str port_group: description: - Group of ports. type: str port: description: - Multiple destination ports can be specified as a comma-separated list. - The whole list can also be "negated" using '!'. - For example:'!22,telnet,http,123,1001-1005'. type: str disable: description: - Option to disable firewall rule. - aliased to disabled type: bool aliases: ["disabled"] fragment: description: - IP fragment match. type: str choices: - match-frag - match-non-frag icmp: description: - ICMP type and code information. type: dict suboptions: type_name: description: - ICMP type-name. type: str choices: - any - echo-reply - destination-unreachable - network-unreachable - host-unreachable - protocol-unreachable - port-unreachable - fragmentation-needed - source-route-failed - network-unknown - host-unknown - network-prohibited - host-prohibited - TOS-network-unreachable - TOS-host-unreachable - communication-prohibited - host-precedence-violation - precedence-cutoff - source-quench - redirect - network-redirect - host-redirect - TOS-network-redirect - TOS-host-redirect - echo-request - router-advertisement - router-solicitation - time-exceeded - ttl-zero-during-transit - ttl-zero-during-reassembly - parameter-problem - ip-header-bad - required-option-missing - timestamp-request - timestamp-reply - address-mask-request - address-mask-reply - ping - pong - ttl-exceeded code: description: - ICMP code. type: int type: description: - ICMP type. type: int inbound_interface: description: - Inbound interface. - Only valid in 1.4 and later. type: dict suboptions: name: description: - Interface name. - Can have wildcards type: str group: description: - Interface group. type: str ipsec: description: - Inbound ip sec packets. - VyOS 1.4 and older match-ipsec/match-none - VyOS 1.5 and later require -in/-out suffixes type: str choices: - match-ipsec - match-none - match-ipsec-in - match-ipsec-out - match-none-in - match-none-out jump_target: description: - Jump target if the action is jump. - Only valid in 1.4 and later. - Only valid when action = jump. type: str limit: description: - Rate limit using a token bucket filter. type: dict suboptions: burst: description: - Maximum number of packets to allow in excess of rate. type: int rate: description: - format for rate (integer/time unit). - any one of second, minute, hour or day may be used to specify time unit. - eg. 1/second implies rule to be matched at an average of once per second. type: dict suboptions: number: description: - This is the integer value. type: int unit: description: - This is the time unit. type: str log: description: - Option to log packets matching rule. type: str choices: ['disable', 'enable'] outbound_interface: description: - Match outbound interface. - Only valid in 1.4 and later. type: dict suboptions: name: description: - Interface name. - Can have wildcards type: str group: description: - Interface group. type: str packet_length: description: - Packet length match. - Only valid in 1.4 and later. - Multiple values from 1 to 65535 and ranges are supported type: list elements: dict suboptions: length: description: - Packet length or range. type: str packet_length_exclude: description: - Packet length match. - Only valid in 1.4 and later. - Multiple values from 1 to 65535 and ranges are supported type: list elements: dict suboptions: length: description: - Packet length or range. type: str packet_type: description: - Packet type match. type: str choices: ['broadcast', 'multicast', 'host', 'other'] protocol: description: - Protocol to match (protocol name in /etc/protocols or protocol number or all). - IP protocol name from /etc/protocols (e.g. "tcp" or "udp"). - <0-255> IP protocol number. - tcp_udp Both TCP and UDP. - all All IP protocols. - (!)All IP protocols except for the specified name or number. type: str queue: description: - Queue options. - Only valid in 1.4 and later. - Only valid when action = queue. - Can be a queue number or range. type: str queue_options: description: - Queue options. - Only valid in 1.4 and later. - Only valid when action = queue. type: str choices: ['bypass', 'fanout'] recent: description: - Parameters for matching recently seen sources. type: dict suboptions: count: description: - Source addresses seen more than N times. type: int time: description: - Source addresses seen in the last N seconds. - Since 1.4, this is a string of second/minute/hour type: str source: description: - Source parameters. type: dict suboptions: address: description: - Source ip address subnet or range. - IPv4/6 address, subnet or range to match. - Match everything except the specified address, subnet or range. - Source ip address subnet or range. type: str group: description: - Source group. type: dict suboptions: address_group: description: - Group of addresses. type: str network_group: description: - Group of networks. type: str port_group: description: - Group of ports. type: str port: description: - Multiple source ports can be specified as a comma-separated list. - The whole list can also be "negated" using '!'. - For example:'!22,telnet,http,123,1001-1005'. type: str mac_address: description: - MAC address to match. - Match everything except the specified MAC address. type: str fqdn: description: - Fully qualified domain name. - Available in 1.4 and later. type: str state: description: - Session state. type: dict suboptions: established: description: - Established state. type: bool invalid: description: - Invalid state. type: bool new: description: - New state. type: bool related: description: - Related state. type: bool synproxy: description: - SYN proxy options. - Only valid in 1.4 and later. - Only valid when action = synproxy. type: dict suboptions: mss: description: - Adjust MSS (501-65535) type: int window_scale: description: - Window scale (1-14). type: int tcp: description: - TCP flags to match. type: dict suboptions: flags: description: - list of tcp flags to be matched - 5.0 breaking change to support 1.4+ and 1.3- type: list elements: dict suboptions: flag: description: - TCP flag to be matched. - syn, ack, fin, rst, urg, psh, all (1.3-) - syn, ack, fin, rst, urg, psh, cwr, ecn (1.4+) type: str choices: - ack - cwr - ecn - fin - psh - rst - syn - urg - all invert: description: - Invert the match. type: bool time: description: - Time to match rule. type: dict suboptions: utc: description: - Interpret times for startdate, stopdate, starttime and stoptime to be UTC. type: bool monthdays: description: - Monthdays to match rule on. type: str startdate: description: - Date to start matching rule. type: str starttime: description: - Time of day to start matching rule. type: str stopdate: description: - Date to stop matching rule. type: str stoptime: description: - Time of day to stop matching rule. type: str weekdays: description: - Weekdays to match rule on. type: str running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep firewall). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state the configuration should be left in type: str choices: - merged - replaced - overridden - deleted - gathered - rendered - parsed default: merged """ EXAMPLES = """ # Using deleted to delete firewall rules based on rule-set name # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall name Downlink default-action 'accept' -# set firewall name Downlink description 'IPv4 INBOUND rule set' -# set firewall name Downlink rule 501 action 'accept' -# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' -# set firewall name Downlink rule 501 ipsec 'match-ipsec' -# set firewall name Downlink rule 502 action 'reject' -# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' -# set firewall name Downlink rule 502 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink default-action 'accept' +# set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' +# set firewall ipv4 name Downlink rule 501 action 'accept' +# set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' +# set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink rule 502 action 'reject' +# set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' +# set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ -# "delete firewall name Downlink" +# "delete firewall ipv4 name Downlink" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using deleted to delete firewall rules based on afi # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' # set firewall group address-group 'inbound' -# set firewall name Downlink default-action 'accept' -# set firewall name Downlink description 'IPv4 INBOUND rule set' -# set firewall name Downlink rule 501 action 'accept' -# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' -# set firewall name Downlink rule 501 ipsec 'match-ipsec' -# set firewall name Downlink rule 502 action 'reject' -# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' -# set firewall name Downlink rule 502 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink default-action 'accept' +# set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' +# set firewall ipv4 name Downlink rule 501 action 'accept' +# set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' +# set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink rule 502 action 'reject' +# set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' +# set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ -# "delete firewall name" +# "delete firewall ipv4 name" # ] # # "after": [] # After state # ------------ # vyos@vyos:~$ show configuration commands| grep firewall -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' # Using deleted to delete all the the firewall rules when provided config is empty # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall name Downlink default-action 'accept' -# set firewall name Downlink description 'IPv4 INBOUND rule set' -# set firewall name Downlink rule 501 action 'accept' -# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' -# set firewall name Downlink rule 501 ipsec 'match-ipsec' -# set firewall name Downlink rule 502 action 'reject' -# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' -# set firewall name Downlink rule 502 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink default-action 'accept' +# set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' +# set firewall ipv4 name Downlink rule 501 action 'accept' +# set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' +# set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink rule 502 action 'reject' +# set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' +# set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' # - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ -# "delete firewall name" +# "delete firewall ipv4 name" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept rules: - number: 1 action: accept description: Fwipv6-Rule 1 is configured by Ansible ipsec: match-ipsec - number: 2 action: accept description: Fwipv6-Rule 2 is configured by Ansible ipsec: match-ipsec - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ -# "set firewall ipv6-name UPLINK default-action 'accept'", -# "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", -# "set firewall ipv6-name UPLINK rule 1 action 'accept'", -# "set firewall ipv6-name UPLINK rule 1", -# "set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'", -# "set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'", -# "set firewall ipv6-name UPLINK rule 2 action 'accept'", -# "set firewall ipv6-name UPLINK rule 2", -# "set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'", -# "set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'", -# "set firewall name INBOUND default-action 'accept'", -# "set firewall name INBOUND description 'IPv4 INBOUND rule set'", -# "set firewall name INBOUND rule 101 action 'accept'", -# "set firewall name INBOUND rule 101", -# "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", -# "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", -# "set firewall name INBOUND rule 102 action 'reject'", -# "set firewall name INBOUND rule 102", -# "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", -# "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", -# "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", -# "set firewall name INBOUND rule 103 destination group address-group inbound", -# "set firewall name INBOUND rule 103", -# "set firewall name INBOUND rule 103 source address 192.0.2.0", -# "set firewall name INBOUND rule 103 state established enable", -# "set firewall name INBOUND rule 103 state related enable", -# "set firewall name INBOUND rule 103 state invalid disable", -# "set firewall name INBOUND rule 103 state new disable", -# "set firewall name INBOUND rule 103 action 'accept'" +# "set firewall ipv6 name UPLINK default-action 'accept'", +# "set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set'", +# "set firewall ipv6 name UPLINK rule 1 action 'accept'", +# "set firewall ipv6 name UPLINK rule 1", +# "set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'", +# "set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec'", +# "set firewall ipv6 name UPLINK rule 2 action 'accept'", +# "set firewall ipv6 name UPLINK rule 2", +# "set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'", +# "set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec'", +# "set firewall ipv4 name INBOUND default-action 'accept'", +# "set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set'", +# "set firewall ipv4 name INBOUND rule 101 action 'accept'", +# "set firewall ipv4 name INBOUND rule 101", +# "set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec'", +# "set firewall ipv4 name INBOUND rule 102 action 'reject'", +# "set firewall ipv4 name INBOUND rule 102", +# "set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec'", +# "set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 103 destination group address-group inbound", +# "set firewall ipv4 name INBOUND rule 103", +# "set firewall ipv4 name INBOUND rule 103 source address 192.0.2.0", +# "set firewall ipv4 name INBOUND rule 103 state established", +# "set firewall ipv4 name INBOUND rule 103 state related", +# "set firewall ipv4 name INBOUND rule 103 action 'accept'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 102 action 'reject' -# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' -# set firewall name INBOUND rule 102 ipsec 'match-ipsec' -# set firewall name INBOUND rule 103 action 'accept' -# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' -# set firewall name INBOUND rule 103 destination group address-group 'inbound' -# set firewall name INBOUND rule 103 source address '192.0.2.0' -# set firewall name INBOUND rule 103 state established 'enable' -# set firewall name INBOUND rule 103 state invalid 'disable' -# set firewall name INBOUND rule 103 state new 'disable' -# set firewall name INBOUND rule 103 state related 'enable' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 102 action 'reject' +# set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 103 action 'accept' +# set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' +# set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' +# set firewall ipv4 name INBOUND rule 103 state established +# set firewall ipv4 name INBOUND rule 103 state related # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 102 action 'reject' -# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' -# set firewall name INBOUND rule 102 ipsec 'match-ipsec' -# set firewall name INBOUND rule 103 action 'accept' -# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' -# set firewall name INBOUND rule 103 destination group address-group 'inbound' -# set firewall name INBOUND rule 103 source address '192.0.2.0' -# set firewall name INBOUND rule 103 state established 'enable' -# set firewall name INBOUND rule 103 state invalid 'disable' -# set firewall name INBOUND rule 103 state new 'disable' -# set firewall name INBOUND rule 103 state related 'enable' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 102 action 'reject' +# set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 103 action 'accept' +# set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' +# set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' +# set firewall ipv4 name INBOUND rule 103 state established +# set firewall ipv4 name INBOUND rule 103 state related # - name: >- Replace device configurations of listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 104 action: reject description: Rule 104 is configured by Ansible ipsec: match-none state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # "commands": [ -# "delete firewall ipv6-name UPLINK rule 1", -# "delete firewall ipv6-name UPLINK rule 2", -# "delete firewall name INBOUND rule 102", -# "delete firewall name INBOUND rule 103", -# "set firewall name INBOUND rule 104 action 'reject'", -# "set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'", -# "set firewall name INBOUND rule 104", -# "set firewall name INBOUND rule 104 ipsec 'match-none'" +# "delete firewall ipv6 name UPLINK rule 1", +# "delete firewall ipv6 name UPLINK rule 2", +# "delete firewall ipv4 name INBOUND rule 102", +# "delete firewall ipv4 name INBOUND rule 103", +# "set firewall ipv4 name INBOUND rule 104 action 'reject'", +# "set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 104", +# "set firewall ipv4 name INBOUND rule 104 ipsec 'match-none'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 104 action 'reject' -# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' -# set firewall name INBOUND rule 104 ipsec 'match-none' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 104 action 'reject' +# set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 104 ipsec 'match-none' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 104 action 'reject' -# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' -# set firewall name INBOUND rule 104 ipsec 'match-none' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 104 action 'reject' +# set firewall ipv4 name INBOUND rule 104 description 'Rule 104 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 104 ipsec 'match-none' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink description: IPv4 INBOUND rule set default_action: accept rules: - number: 501 action: accept description: Rule 501 is configured by Ansible ipsec: match-ipsec - number: 502 action: reject description: Rule 502 is configured by Ansible ipsec: match-ipsec state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # "commands": [ -# "delete firewall ipv6-name UPLINK", -# "delete firewall name INBOUND", -# "set firewall name Downlink default-action 'accept'", -# "set firewall name Downlink description 'IPv4 INBOUND rule set'", -# "set firewall name Downlink rule 501 action 'accept'", -# "set firewall name Downlink rule 501", -# "set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'", -# "set firewall name Downlink rule 501 ipsec 'match-ipsec'", -# "set firewall name Downlink rule 502 action 'reject'", -# "set firewall name Downlink rule 502", -# "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", -# "set firewall name Downlink rule 502 ipsec 'match-ipsec'" +# "delete firewall ipv6 name UPLINK", +# "delete firewall ipv4 name INBOUND", +# "set firewall ipv4 name Downlink default-action 'accept'", +# "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'", +# "set firewall ipv4 name Downlink rule 501 action 'accept'", +# "set firewall ipv4 name Downlink rule 501", +# "set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible'", +# "set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec'", +# "set firewall ipv4 name Downlink rule 502 action 'reject'", +# "set firewall ipv4 name Downlink rule 502", +# "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'", +# "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" # # # "after": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # # # After state # ------------ # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall name Downlink default-action 'accept' -# set firewall name Downlink description 'IPv4 INBOUND rule set' -# set firewall name Downlink rule 501 action 'accept' -# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' -# set firewall name Downlink rule 501 ipsec 'match-ipsec' -# set firewall name Downlink rule 502 action 'reject' -# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' -# set firewall name Downlink rule 502 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink default-action 'accept' +# set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' +# set firewall ipv4 name Downlink rule 501 action 'accept' +# set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' +# set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' +# set firewall ipv4 name Downlink rule 502 action 'reject' +# set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' +# set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec' # Using gathered # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 102 action 'reject' -# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' -# set firewall name INBOUND rule 102 ipsec 'match-ipsec' -# set firewall name INBOUND rule 103 action 'accept' -# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' -# set firewall name INBOUND rule 103 destination group address-group 'inbound' -# set firewall name INBOUND rule 103 source address '192.0.2.0' -# set firewall name INBOUND rule 103 state established 'enable' -# set firewall name INBOUND rule 103 state invalid 'disable' -# set firewall name INBOUND rule 103 state new 'disable' -# set firewall name INBOUND rule 103 state related 'enable' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 102 action 'reject' +# set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 103 action 'accept' +# set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' +# set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' +# set firewall ipv4 name INBOUND rule 103 state established +# set firewall ipv4 name INBOUND rule 103 state related # - name: Gather listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' -# set firewall ipv6-name UPLINK default-action 'accept' -# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' -# set firewall ipv6-name UPLINK rule 1 action 'accept' -# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' -# set firewall ipv6-name UPLINK rule 2 action 'accept' -# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' -# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' -# set firewall name INBOUND default-action 'accept' -# set firewall name INBOUND description 'IPv4 INBOUND rule set' -# set firewall name INBOUND rule 101 action 'accept' -# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' -# set firewall name INBOUND rule 101 ipsec 'match-ipsec' -# set firewall name INBOUND rule 102 action 'reject' -# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' -# set firewall name INBOUND rule 102 ipsec 'match-ipsec' -# set firewall name INBOUND rule 103 action 'accept' -# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' -# set firewall name INBOUND rule 103 destination group address-group 'inbound' -# set firewall name INBOUND rule 103 source address '192.0.2.0' -# set firewall name INBOUND rule 103 state established 'enable' -# set firewall name INBOUND rule 103 state invalid 'disable' -# set firewall name INBOUND rule 103 state new 'disable' -# set firewall name INBOUND rule 103 state related 'enable' +# set firewall ipv6 name UPLINK default-action 'accept' +# set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set' +# set firewall ipv6 name UPLINK rule 1 action 'accept' +# set firewall ipv6 name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 1 ipsec 'match-ipsec' +# set firewall ipv6 name UPLINK rule 2 action 'accept' +# set firewall ipv6 name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' +# set firewall ipv6 name UPLINK rule 2 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND default-action 'accept' +# set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set' +# set firewall ipv4 name INBOUND rule 101 action 'accept' +# set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 102 action 'reject' +# set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec' +# set firewall ipv4 name INBOUND rule 103 action 'accept' +# set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible' +# set firewall ipv4 name INBOUND rule 103 destination group address-group 'inbound' +# set firewall ipv4 name INBOUND rule 103 source address '192.0.2.0' +# set firewall ipv4 name INBOUND rule 103 state established +# set firewall ipv4 name INBOUND rule 103 state related # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ -# "set firewall ipv6-name UPLINK default-action 'accept'", -# "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", -# "set firewall name INBOUND default-action 'accept'", -# "set firewall name INBOUND description 'IPv4 INBOUND rule set'", -# "set firewall name INBOUND rule 101 action 'accept'", -# "set firewall name INBOUND rule 101", -# "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", -# "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", -# "set firewall name INBOUND rule 102 action 'reject'", -# "set firewall name INBOUND rule 102", -# "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", -# "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", -# "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", -# "set firewall name INBOUND rule 103 destination group address-group inbound", -# "set firewall name INBOUND rule 103", -# "set firewall name INBOUND rule 103 source address 192.0.2.0", -# "set firewall name INBOUND rule 103 state established enable", -# "set firewall name INBOUND rule 103 state related enable", -# "set firewall name INBOUND rule 103 state invalid disable", -# "set firewall name INBOUND rule 103 state new disable", -# "set firewall name INBOUND rule 103 action 'accept'" +# "set firewall ipv6 name UPLINK default-action 'accept'", +# "set firewall ipv6 name UPLINK description 'This is ipv6 specific rule-set'", +# "set firewall ipv4 name INBOUND default-action 'accept'", +# "set firewall ipv4 name INBOUND description 'IPv4 INBOUND rule set'", +# "set firewall ipv4 name INBOUND rule 101 action 'accept'", +# "set firewall ipv4 name INBOUND rule 101", +# "set firewall ipv4 name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 101 ipsec 'match-ipsec'", +# "set firewall ipv4 name INBOUND rule 102 action 'reject'", +# "set firewall ipv4 name INBOUND rule 102", +# "set firewall ipv4 name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 102 ipsec 'match-ipsec'", +# "set firewall ipv4 name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", +# "set firewall ipv4 name INBOUND rule 103 destination group address-group inbound", +# "set firewall ipv4 name INBOUND rule 103", +# "set firewall ipv4 name INBOUND rule 103 source address 192.0.2.0", +# "set firewall ipv4 name INBOUND rule 103 state established", +# "set firewall ipv4 name INBOUND rule 103 state related", +# "set firewall ipv4 name INBOUND rule 103 action 'accept'" # ] # Using parsed # # - name: Parse the commands for provided configuration vyos.vyos.vyos_firewall_rules: running_config: "set firewall group address-group 'inbound' - set firewall name Downlink default-action 'accept' - set firewall name Downlink description 'IPv4 INBOUND rule set' - set firewall name Downlink rule 501 action 'accept' - set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' - set firewall name Downlink rule 501 ipsec 'match-ipsec' - set firewall name Downlink rule 502 action 'reject' - set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' - set firewall name Downlink rule 502 ipsec 'match-ipsec'" + set firewall ipv4 name Downlink default-action 'accept' + set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set' + set firewall ipv4 name Downlink rule 501 action 'accept' + set firewall ipv4 name Downlink rule 501 description 'Rule 501 is configured by Ansible' + set firewall ipv4 name Downlink rule 501 ipsec 'match-ipsec' + set firewall ipv4 name Downlink rule 502 action 'reject' + set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible' + set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - - "set firewall name Downlink default-action 'accept'" - - "set firewall name Downlink description 'IPv4 INBOUND rule set'" - - "set firewall name Downlink rule 501 action 'accept'" - - "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'" - - "set firewall name Downlink rule 502 ipsec 'match-ipsec'" + - "set firewall ipv4 name Downlink default-action 'accept'" + - "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'" + - "set firewall ipv4 name Downlink rule 501 action 'accept'" + - "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'" + - "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - - "set firewall name Downlink default-action 'accept'" - - "set firewall name Downlink description 'IPv4 INBOUND rule set'" - - "set firewall name Downlink rule 501 action 'accept'" - - "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'" - - "set firewall name Downlink rule 502 ipsec 'match-ipsec'" + - "set firewall ipv4 name Downlink default-action 'accept'" + - "set firewall ipv4 name Downlink description 'IPv4 INBOUND rule set'" + - "set firewall ipv4 name Downlink rule 501 action 'accept'" + - "set firewall ipv4 name Downlink rule 502 description 'Rule 502 is configured by Ansible'" + - "set firewall ipv4 name Downlink rule 502 ipsec 'match-ipsec'" gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.firewall_rules.firewall_rules import ( Firewall_rulesArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.firewall_rules.firewall_rules import ( Firewall_rules, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Firewall_rulesArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Firewall_rules(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_interfaces.py b/plugins/modules/vyos_interfaces.py index 6125b4b9..82b4fd70 100644 --- a/plugins/modules/vyos_interfaces.py +++ b/plugins/modules/vyos_interfaces.py @@ -1,909 +1,909 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_interfaces """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_interfaces version_added: '2.9.0' short_description: Manages interface attributes of VyOS network devices. description: - This module manages the interface attributes on VyOS network devices. - This module supports managing base attributes of Ethernet, Bonding, VXLAN, Loopback and Virtual Tunnel Interfaces. notes: -- Tested against VyOS 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). author: - Nilashish Chakraborty (@nilashishc) - Rohit Thakur (@rohitthakur2590) options: config: description: The provided interface configuration. type: list elements: dict suboptions: name: description: - Full name of the interface, e.g. eth0, eth1, bond0, vti1, vxlan2. type: str required: true description: description: - Interface description. type: str duplex: description: - Interface duplex mode. - Applicable for Ethernet interfaces only. choices: - full - half - auto type: str enabled: default: true description: - Administrative state of the interface. - Set the value to C(true) to administratively enable the interface or C(false) to disable it. type: bool aliases: ['enable'] mtu: description: - MTU for a specific interface. Refer to vendor documentation for valid values. - Applicable for Ethernet, Bonding, VXLAN and Virtual Tunnel interfaces. type: int speed: description: - Interface link speed. - Applicable for Ethernet interfaces only. type: str choices: - auto - '10' - '100' - '1000' - '2500' - '10000' vifs: description: - Virtual sub-interfaces related configuration. - 802.1Q VLAN interfaces are represented as virtual sub-interfaces in VyOS. type: list elements: dict suboptions: vlan_id: description: - Identifier for the virtual sub-interface. type: int description: description: - Virtual sub-interface description. type: str enabled: description: - Administrative state of the virtual sub-interface. - Set the value to C(true) to administratively enable the interface or C(false) to disable it. type: bool default: true aliases: ['enable'] mtu: description: - MTU for the virtual sub-interface. - Refer to vendor documentation for valid values. type: int running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep interfaces). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state of the configuration after module completion. type: str choices: - merged - replaced - overridden - deleted - rendered - gathered - parsed default: merged """ EXAMPLES = """ # Using merged # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding 'bond0' # set interfaces bonding 'bond1' # set interfaces bonding bond2 'ip' # set interfaces bonding bond2 'ipv6' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 'ip' # set interfaces ethernet eth0 'ipv6' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet 'eth1' # set interfaces ethernet 'eth2' - name: Merge provided configuration with device configuration vyos.vyos.vyos_interfaces: config: - name: eth2 description: Configured by Ansible enabled: true vifs: - vlan_id: 200 description: VIF 200 - ETH2 - name: eth3 description: Configured by Ansible mtu: 1500 - name: bond1 description: Bond - 1 mtu: 1200 - name: vti2 description: VTI - 2 enabled: false state: merged # Task Output # ----------- # before: # - enabled: true # name: lo # - enabled: true # name: eth3 # - enabled: true # name: eth2 # - enabled: true # name: eth1 # - duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - set interfaces ethernet eth2 description 'Configured by Ansible' # - set interfaces ethernet eth2 vif 200 # - set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' # - set interfaces ethernet eth3 description 'Configured by Ansible' # - set interfaces ethernet eth3 mtu '1500' # - set interfaces bonding bond1 # - set interfaces bonding bond1 description 'Bond - 1' # - set interfaces bonding bond1 mtu '1200' # - set interfaces vti vti2 # - set interfaces vti vti2 description 'VTI - 2' # - set interfaces vti vti2 disable # after: # - description: Bond - 1 # enabled: true # mtu: 1200 # name: bond1 # - enabled: true # name: lo # - description: VTI - 2 # enabled: false # name: vti2 # - description: Configured by Ansible # enabled: true # mtu: 1500 # name: eth3 # - description: Configured by Ansible # enabled: true # name: eth2 # vifs: # - description: VIF 200 - ETH2 # enabled: true # vlan_id: '200' # - enabled: true # name: eth1 # - duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1200' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' # set interfaces ethernet eth3 description 'Configured by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 mtu '1500' # set interfaces loopback lo # set interfaces vti vti2 description 'VTI - 2' # set interfaces vti vti2 disable # Using replaced # Before state: # ------------- # vyos:~$ show configuration commands | grep eth # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 description 'Management Interface for the Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Eng Team' # set interfaces ethernet eth1 duplex 'full' # set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65' # set interfaces ethernet eth1 smp_affinity 'auto' # set interfaces ethernet eth1 speed '100' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 duplex 'full' # set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79' # set interfaces ethernet eth2 mtu '500' # set interfaces ethernet eth2 smp_affinity 'auto' # set interfaces ethernet eth2 speed '100' # set interfaces ethernet eth2 vif 200 description 'Configured by Ansible' # set interfaces ethernet eth3 description 'Configured by Ansible' # set interfaces ethernet eth3 duplex 'full' # set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85' # set interfaces ethernet eth3 mtu '1500' # set interfaces ethernet eth3 smp_affinity 'auto' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - name: Replace device configurations of listed interfaces with provided configurations vyos.vyos.vyos_interfaces: config: - name: eth2 description: Replaced by Ansible - name: eth3 description: Replaced by Ansible - name: eth1 description: Replaced by Ansible state: replaced # Task Output # ----------- # before: # - description: Bond - 1 # enabled: true # mtu: 1400 # name: bond1 # - enabled: true # name: lo # - description: Configured by Ansible # duplex: full # enabled: true # mtu: 1500 # name: eth3 # speed: '100' # - description: Configured by Ansible # duplex: full # enabled: true # mtu: 500 # name: eth2 # speed: '100' # vifs: # - description: VIF 200 - ETH2 # enabled: true # vlan_id: '200' # - description: Configured by Ansible Eng Team # duplex: full # enabled: true # name: eth1 # speed: '100' # - description: Management Interface for the Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - delete interfaces ethernet eth2 speed # - delete interfaces ethernet eth2 duplex # - delete interfaces ethernet eth2 mtu # - delete interfaces ethernet eth2 vif 200 # - set interfaces ethernet eth2 description 'Replaced by Ansible' # - delete interfaces ethernet eth3 speed # - delete interfaces ethernet eth3 duplex # - delete interfaces ethernet eth3 mtu # - set interfaces ethernet eth3 description 'Replaced by Ansible' # - delete interfaces ethernet eth1 speed # - delete interfaces ethernet eth1 duplex # - set interfaces ethernet eth1 description 'Replaced by Ansible' # after: # - description: Bond - 1 # enabled: true # mtu: 1400 # name: bond1 # - enabled: true # name: lo # - description: Replaced by Ansible # enabled: true # name: eth3 # - description: Replaced by Ansible # enabled: true # name: eth2 # - description: Replaced by Ansible # enabled: true # name: eth1 # - description: Management Interface for the Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Management Interface for the Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Replaced by Ansible' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 description 'Replaced by Ansible' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 description 'Replaced by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # Using overridden # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Ethernet Interface - 0' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 mtu '1200' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Eng Team' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 mtu '100' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth1 vif 100 description 'VIF 100 - ETH1' # set interfaces ethernet eth1 vif 100 disable # set interfaces ethernet eth2 description 'Configured by Ansible Team (Admin Down)' # set interfaces ethernet eth2 disable # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 mtu '600' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 description 'Configured by Ansible Network' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # set interfaces vti vti1 description 'Virtual Tunnel Interface - 1' # set interfaces vti vti1 mtu '68' - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_interfaces: config: - name: eth0 description: Outbound Interface For The Appliance speed: auto duplex: auto - name: eth2 speed: auto duplex: auto - name: eth3 mtu: 1200 state: overridden # Task Output # ----------- # before: # - enabled: true # name: lo # - description: Virtual Tunnel Interface - 1 # enabled: true # mtu: 68 # name: vti1 # - description: Configured by Ansible Network # enabled: true # name: eth3 # - description: Configured by Ansible Team (Admin Down) # enabled: false # mtu: 600 # name: eth2 # - description: Configured by Ansible Eng Team # enabled: true # mtu: 100 # name: eth1 # vifs: # - description: VIF 100 - ETH1 # enabled: false # vlan_id: '100' # - description: Ethernet Interface - 0 # duplex: auto # enabled: true # mtu: 1200 # name: eth0 # speed: auto # commands: # - delete interfaces vti vti1 description # - delete interfaces vti vti1 mtu # - delete interfaces ethernet eth1 description # - delete interfaces ethernet eth1 mtu # - delete interfaces ethernet eth1 vif 100 # - delete interfaces ethernet eth0 mtu # - set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' # - delete interfaces ethernet eth2 description # - delete interfaces ethernet eth2 mtu # - set interfaces ethernet eth2 duplex 'auto' # - delete interfaces ethernet eth2 disable # - set interfaces ethernet eth2 speed 'auto' # - delete interfaces ethernet eth3 description # - set interfaces ethernet eth3 mtu '1200' # after: # - enabled: true # name: lo # - enabled: true # name: vti1 # - enabled: true # mtu: 1200 # name: eth3 # - duplex: auto # enabled: true # name: eth2 # speed: auto # - enabled: true # name: eth1 # - description: Outbound Interface For The Appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 duplex 'auto' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 speed 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 mtu '1200' # set interfaces loopback lo # set interfaces vti vti1 # Using deleted # Before state: # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 description 'LAG - 1' # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface for this appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible Network' # set interfaces ethernet eth1 duplex 'full' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth1 speed '100' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 disable # set interfaces ethernet eth2 duplex 'full' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 mtu '600' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth2 speed '100' # set interfaces ethernet eth3 description 'Configured by Ansible Network' # set interfaces ethernet eth3 duplex 'full' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves) vyos.vyos.vyos_interfaces: config: - name: bond1 - name: eth1 - name: eth2 - name: eth3 state: deleted # Task Output # ----------- # before: # - enabled: true # mtu: 1300 # name: bond0 # - description: LAG - 1 # enabled: true # name: bond1 # - enabled: true # name: lo # - description: Configured by Ansible Network # duplex: full # enabled: true # name: eth3 # speed: '100' # - description: Configured by Ansible # duplex: full # enabled: false # mtu: 600 # name: eth2 # speed: '100' # - description: Configured by Ansible Network # duplex: full # enabled: true # name: eth1 # speed: '100' # - description: Outbound Interface for this appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # commands: # - delete interfaces bonding bond1 description # - delete interfaces ethernet eth1 speed # - delete interfaces ethernet eth1 duplex # - delete interfaces ethernet eth1 description # - delete interfaces ethernet eth2 speed # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 duplex # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 description # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth2 mtu # - delete interfaces ethernet eth2 disable # - delete interfaces ethernet eth3 speed # - delete interfaces ethernet eth3 duplex # - delete interfaces ethernet eth3 description # after: # - enabled: true # mtu: 1300 # name: bond0 # - enabled: true # name: bond1 # - enabled: true # name: lo # - enabled: true # name: eth3 # - enabled: true # name: eth2 # - enabled: true # name: eth1 # - description: Outbound Interface for this appliance # duplex: auto # enabled: true # name: eth0 # speed: auto # After state: # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 description 'Outbound Interface for this appliance' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' # set interfaces ethernet eth0 smp-affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' # set interfaces ethernet eth1 smp-affinity 'auto' # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo # Using gathered # Before state: # ------------- # vyos@192# run show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' # set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' # set interfaces ethernet eth1 description 'Configured by Ansible' # set interfaces ethernet eth1 duplex 'auto' # set interfaces ethernet eth1 mtu '1500' # set interfaces ethernet eth1 speed 'auto' # set interfaces ethernet eth1 vif 200 description 'VIF - 200' # set interfaces ethernet eth2 description 'Configured by Ansible' # set interfaces ethernet eth2 duplex 'auto' # set interfaces ethernet eth2 mtu '1500' # set interfaces ethernet eth2 speed 'auto' # set interfaces ethernet eth2 vif 200 description 'VIF - 200' # - name: Gather listed interfaces with provided configurations vyos.vyos.vyos_interfaces: state: gathered # Task output # ----------- # gathered: # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth2 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth1 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - duplex: auto # enabled: true # name: eth0 # speed: auto # Using rendered - name: Render the commands for provided configuration vyos.vyos.vyos_interfaces: config: - name: eth0 enabled: true duplex: auto speed: auto - name: eth1 description: Configured by Ansible - Interface 1 mtu: 1500 speed: auto duplex: auto enabled: true vifs: - vlan_id: 100 description: Eth1 - VIF 100 mtu: 400 enabled: true - vlan_id: 101 description: Eth1 - VIF 101 enabled: true - name: eth2 description: Configured by Ansible - Interface 2 (ADMIN DOWN) mtu: 600 enabled: false state: rendered # Task Output # ----------- # rendered: # - set interfaces ethernet eth0 duplex 'auto' # - set interfaces ethernet eth0 speed 'auto' # - delete interfaces ethernet eth0 disable # - set interfaces ethernet eth1 duplex 'auto' # - delete interfaces ethernet eth1 disable # - set interfaces ethernet eth1 speed 'auto' # - set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1' # - set interfaces ethernet eth1 mtu '1500' # - set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100' # - set interfaces ethernet eth1 vif 100 mtu '400' # - set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101' # - set interfaces ethernet eth2 disable # - set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN # DOWN)' # - set interfaces ethernet eth2 mtu '600' # Using parsed - name: Parse the configuration. vyos.vyos.vyos_interfaces: running_config: "set interfaces ethernet eth0 address 'dhcp' set interfaces ethernet eth0 duplex 'auto' set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' set interfaces ethernet eth0 smp_affinity 'auto' set interfaces ethernet eth0 speed 'auto' set interfaces ethernet eth1 description 'Configured by Ansible' set interfaces ethernet eth1 duplex 'auto' set interfaces ethernet eth1 mtu '1500' set interfaces ethernet eth1 speed 'auto' set interfaces ethernet eth1 vif 200 description 'VIF - 200' set interfaces ethernet eth2 description 'Configured by Ansible' set interfaces ethernet eth2 duplex 'auto' set interfaces ethernet eth2 mtu '1500' set interfaces ethernet eth2 speed 'auto' set interfaces ethernet eth2 vif 200 description 'VIF - 200'" state: parsed # Task output # ----------- # parsed: # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth2 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - description: Configured by Ansible # duplex: auto # enabled: true # mtu: 1500 # name: eth1 # speed: auto # vifs: # - description: VIF - 200 # enabled: true # vlan_id: 200 # - duplex: auto # enabled: true # name: eth0 # speed: auto """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: list sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - 'set interfaces ethernet eth1 mtu 1200' - 'set interfaces ethernet eth2 vif 100 description VIF 100' rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - 'set interfaces ethernet eth1 mtu 1200' - 'set interfaces ethernet eth2 vif 100 description VIF 100' gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.interfaces.interfaces import ( InterfacesArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.interfaces.interfaces import ( Interfaces, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=InterfacesArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Interfaces(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_lag_interfaces.py b/plugins/modules/vyos_lag_interfaces.py index 090021ad..a90d0098 100644 --- a/plugins/modules/vyos_lag_interfaces.py +++ b/plugins/modules/vyos_lag_interfaces.py @@ -1,787 +1,787 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_lag_interfaces """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_lag_interfaces version_added: '1.0.0' short_description: LAG interfaces resource module description: This module manages attributes of link aggregation groups on VyOS network devices. author: - Rohit Thakur (@rohitthakur2590) notes: -- Tested against VyOS 1.3.8. +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). options: config: description: A list of link aggregation group configurations. type: list elements: dict suboptions: name: description: - Name of the link aggregation group (LAG) or bond. type: str required: true mode: description: - LAG or bond mode. type: str choices: - 802.3ad - active-backup - broadcast - round-robin - transmit-load-balance - adaptive-load-balance - xor-hash members: description: - List of member interfaces for the LAG (bond). type: list elements: dict suboptions: member: description: - Name of the member interface. type: str primary: description: - Primary device interfaces for the LAG (bond). type: str hash_policy: description: - LAG or bonding transmit hash policy. type: str choices: - layer2 - layer2+3 - layer3+4 arp_monitor: description: - ARP Link monitoring parameters. type: dict suboptions: interval: description: - ARP link monitoring frequency in milliseconds. type: int target: description: - IP address to use for ARP monitoring. type: list elements: str running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep bond). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state of the configuration after module completion. type: str choices: - merged - replaced - overridden - deleted - parsed - gathered - rendered default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond2 mode: active-backup members: - member: eth2 - member: eth1 hash_policy: layer2 primary: eth2 - name: bond3 mode: active-backup hash_policy: layer2+3 members: - member: eth3 primary: eth3 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # "commands": [ # "set interfaces bonding bond2 hash-policy 'layer2'", # "set interfaces bonding bond2 mode 'active-backup'", # "set interfaces ethernet eth2 bond-group bond2", # "set interfaces ethernet eth1 bond-group bond2", # "set interfaces bonding bond2 primary 'eth2'", # "set interfaces bonding bond3 hash-policy 'layer2+3'", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth3 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ] # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Replace device configurations of listed LAGs with provided configurations vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: 802.3ad hash_policy: layer2 members: - member: eth3 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # "commands": [ # "delete interfaces bonding bond3 primary", # "set interfaces bonding bond3 hash-policy 'layer2'", # "set interfaces bonding bond3 mode '802.3ad'" # ], # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond3 mode: active-backup members: - member: eth1 - member: eth2 - member: eth3 primary: eth3 hash_policy: layer2 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth1 bond-group bond3", # "set interfaces ethernet eth2 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ], # # "after": [ # { # "name": "bond2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # }, # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # # After state # ------------ # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond3' # set interfaces ethernet eth2 bond-group 'bond3' # set interfaces ethernet eth3 bond-group 'bond3' # Using deleted # # Before state # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Delete LAG attributes of given interfaces (Note - This won't delete the interface itself) vyos.vyos.vyos_lag_interfaces: config: - name: bond2 - name: bond3 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "delete interfaces bonding bond3 hash-policy", # "delete interfaces ethernet eth3 bond-group bond3", # "delete interfaces bonding bond3 mode", # "delete interfaces bonding bond3 primary" # ], # # "after": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # - name: Gather listed lag interfaces with provided configurations vyos.vyos.vyos_lag_interfaces: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@192# run show configuration commands | grep bond # set interfaces bonding bond0 hash-policy 'layer2' # set interfaces bonding bond0 mode 'active-backup' # set interfaces bonding bond0 primary 'eth1' # set interfaces bonding bond1 hash-policy 'layer2+3' # set interfaces bonding bond1 mode 'active-backup' # set interfaces bonding bond1 primary 'eth2' # set interfaces ethernet eth1 bond-group 'bond0' # set interfaces ethernet eth2 bond-group 'bond1' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lag_interfaces: config: - name: bond0 hash_policy: layer2 members: - member: eth1 mode: active-backup primary: eth1 - name: bond1 hash_policy: layer2+3 members: - member: eth2 mode: active-backup primary: eth2 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set interfaces bonding bond0 hash-policy 'layer2'", # "set interfaces ethernet eth1 bond-group 'bond0'", # "set interfaces bonding bond0 mode 'active-backup'", # "set interfaces bonding bond0 primary 'eth1'", # "set interfaces bonding bond1 hash-policy 'layer2+3'", # "set interfaces ethernet eth2 bond-group 'bond1'", # "set interfaces bonding bond1 mode 'active-backup'", # "set interfaces bonding bond1 primary 'eth2'" # ] # Using parsed # # - name: Parsed the commands for provided configuration vyos.vyos.vyos_l3_interfaces: running_config: "set interfaces bonding bond0 hash-policy 'layer2' set interfaces bonding bond0 mode 'active-backup' set interfaces bonding bond0 primary 'eth1' set interfaces bonding bond1 hash-policy 'layer2+3' set interfaces bonding bond1 mode 'active-backup' set interfaces bonding bond1 primary 'eth2' set interfaces ethernet eth1 bond-group 'bond0' set interfaces ethernet eth2 bond-group 'bond1'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # } # ], # "mode": "active-backup", # "name": "bond0", # "primary": "eth1" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond1", # "primary": "eth2" # } # ] """ RETURN = """ before: description: The configuration prior to the module invocation. returned: always type: list sample: > The configuration returned will always be in the same format of the parameters above. after: description: The resulting configuration module invocation. returned: when changed type: list sample: > The configuration returned will always be in the same format of the parameters above. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - 'set interfaces bonding bond2' - 'set interfaces bonding bond2 hash-policy layer2' """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.lag_interfaces.lag_interfaces import ( Lag_interfacesArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.lag_interfaces.lag_interfaces import ( Lag_interfaces, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Lag_interfacesArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Lag_interfaces(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_lldp_global.py b/plugins/modules/vyos_lldp_global.py index 190f4513..d1ac618a 100644 --- a/plugins/modules/vyos_lldp_global.py +++ b/plugins/modules/vyos_lldp_global.py @@ -1,502 +1,502 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_lldp_global """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_lldp_global version_added: '1.0.0' short_description: LLDP global resource module description: This module manages link layer discovery protocol (LLDP) attributes on VyOS devices. notes: -- Tested against VyOS 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). author: - Rohit Thakur (@rohitthakur2590) options: config: description: The provided link layer discovery protocol (LLDP) configuration. type: dict suboptions: enable: description: - This argument is a boolean value to enable or disable LLDP. type: bool address: description: - Exactly one management address (exclusive with addresses). Deprecated in favor of addresses. To be removed in 7.0.0. type: str addresses: description: - One or more management addresses. The management address is used to identify the management interface of the system. Only addresses connected to the system will be transmitted. type: list elements: str snmp: description: - This argument enable the SNMP queries to LLDP database. type: str legacy_protocols: description: - List of the supported legacy protocols. type: list elements: str choices: - cdp - edp - fdp - sonmp running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep lldp). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state of the configuration after module completion. type: str choices: - merged - replaced - deleted - gathered - rendered - parsed default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands|grep lldp # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lldp_global: config: legacy_protocols: - fdp - cdp snmp: enable addresses: - 192.0.2.11 state: merged # # # ------------------------ # Module Execution Results # ------------------------ # # before": {} # # commands": [ # "set service lldp legacy-protocols fdp", # "set service lldp legacy-protocols cdp", # "set service lldp snmp enable", # "set service lldp management-address '192.0.2.11'" # ] # # after": { # "snmp": "enable" # "addresses": [ # "192.0.2.11" # ] # "legacy_protocols": [ # "cdp", # "fdp" # ] # "enable": true # } # # After state: # ------------- # # set service lldp legacy-protocols cdp # set service lldp legacy-protocols fdp # set service lldp management-address '192.0.2.11' # set service lldp snmp enable # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols fdp # set service lldp management-address '192.0.2.11' # set service lldp snmp enable # - name: Replace device configurations with provided configurations vyos.vyos.vyos_lldp_global: config: legacy_protocols: - edp - sonmp - cdp addresses: - 192.0.2.14 state: replaced # # # ------------------------ # Module Execution Results # ------------------------ # # # "before": { # "snmp": "enable" # "addresses": [ # "192.0.2.11" # ] # "legacy_protocols": [ # "cdp", # "fdp" # ] # "enable": true # } # # "commands": [ # "delete service lldp snmp", # "delete service lldp legacy-protocols fdp", # "delete service lldp management-address '192.0.2.11'", # "set service lldp management-address '192.0.2.14'", # "set service lldp legacy-protocols edp", # "set service lldp legacy-protocols sonmp" # ] # # "after": { # "addresses": [ # "192.0.2.14" # ] # "legacy_protocols": [ # "cdp", # "edp", # "sonmp" # ] # "enable": true # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands|grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols edp # set service lldp legacy-protocols sonmp # set service lldp management-address '192.0.2.14' # Using deleted # # Before state # ------------- # vyos@vyos:~$ show configuration commands|grep lldp # set service lldp legacy-protocols cdp # set service lldp legacy-protocols edp # set service lldp legacy-protocols sonmp # set service lldp management-address '192.0.2.14' # - name: Delete attributes of given lldp service (This won't delete the LLDP service itself) vyos.vyos.vyos_lldp_global: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "addresses": [ # "192.0.2.14" # ] # "legacy_protocols": [ # "cdp", # "edp", # "sonmp" # ] # "enable": true # } # # "commands": [ # "delete service lldp management-address", # "delete service lldp legacy-protocols" # ] # # "after": { # "enable": true # } # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp legacy-protocols 'cdp' # set service lldp management-address '192.0.2.17' # - name: Gather lldp global config with provided configurations vyos.vyos.vyos_lldp_global: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "config_trap": true, # "group": { # "address_group": [ # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.3.1" # }, # { # "address": "192.0.3.2" # } # ], # "name": "ENG-HOSTS" # }, # { # "description": "Sales office hosts address list", # "members": [ # { # "address": "192.0.2.1" # }, # { # "address": "192.0.2.2" # }, # { # "address": "192.0.2.3" # } # ], # "name": "SALES-HOSTS" # } # ], # "network_group": [ # { # "description": "This group has the Management network addresses", # "members": [ # { # "address": "192.0.1.0/24" # } # ], # "name": "MGMT" # } # ] # }, # "log_martians": true, # "ping": { # "all": true, # "broadcast": true # }, # "route_redirects": [ # { # "afi": "ipv4", # "icmp_redirects": { # "receive": false, # "send": true # }, # "ip_src_route": true # } # ], # "state_policy": [ # { # "action": "accept", # "connection_type": "established", # "log": true # }, # { # "action": "reject", # "connection_type": "invalid" # } # ], # "syn_cookies": true, # "twa_hazards_protection": true, # "validation": "strict" # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp legacy-protocols 'cdp' # set service lldp management-address '192.0.2.17' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lldp_global: config: addresses: - 192.0.2.17 enable: true legacy_protocols: - cdp state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set service lldp legacy-protocols 'cdp'", # "set service lldp", # "set service lldp management-address '192.0.2.17'" # ] # # Using parsed # # - name: Parse the provided commands to provide structured configuration vyos.vyos.vyos_lldp_global: running_config: "set service lldp legacy-protocols 'cdp' set service lldp legacy-protocols 'fdp' set service lldp management-address '192.0.2.11'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "addresses": [ # "192.0.2.11" # ] # "enable": true, # "legacy_protocols": [ # "cdp", # "fdp" # ] # } """ RETURN = """ before: description: The configuration prior to the module invocation. returned: always type: dict sample: > The configuration returned will always be in the same format of the parameters above. after: description: The resulting configuration after module invocation. returned: when changed type: dict sample: > The configuration returned will always be in the same format of the parameters above. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - set service lldp legacy-protocols sonmp - set service lldp management-address '192.0.2.14' """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.lldp_global.lldp_global import ( Lldp_globalArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.lldp_global.lldp_global import ( Lldp_global, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Lldp_globalArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Lldp_global(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_lldp_interfaces.py b/plugins/modules/vyos_lldp_interfaces.py index 0a8f892b..ce1c9643 100644 --- a/plugins/modules/vyos_lldp_interfaces.py +++ b/plugins/modules/vyos_lldp_interfaces.py @@ -1,594 +1,594 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_lldp_interfaces """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_lldp_interfaces version_added: '1.0.0' short_description: LLDP interfaces resource module description: This module manages attributes of lldp interfaces on VyOS network devices. notes: -- Tested against VyOS 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). author: - Rohit Thakur (@rohitthakur2590) options: config: description: A list of LLDP interfaces configurations. type: list elements: dict suboptions: name: description: - Name of the LLDP interface. type: str required: true enable: default: true description: - Disable LLDP on the interfaces. type: bool location: description: - LLDP-MED location data. type: dict suboptions: coordinate_based: description: - Coordinate-based location. type: dict suboptions: altitude: description: Altitude in meters. type: int datum: description: Coordinate datum type. type: str choices: - WGS84 - NAD83 - MLLW latitude: description: Latitude. type: str required: true longitude: description: Longitude. type: str required: true elin: description: Emergency Call Service ELIN number (between 10-25 numbers). type: str running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep lldp). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state of the configuration after module completion. type: str choices: - merged - replaced - overridden - deleted - rendered - parsed - gathered default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # - name: Merge provided configuration with device configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth1 location: elin: 0000000911 - name: eth2 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set service lldp interface eth1 location elin '0000000911'", # "set service lldp interface eth1", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2" # ] # # "after": { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # } # }, # "name": "eth1" # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # - name: >- Replace device configurations of listed LLDP interfaces with provided configurations vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 location: elin: 0000000911 - name: eth1 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "set service lldp interface eth2 'disable'", # "set service lldp interface eth2 location elin '0000000911'", # "delete service lldp interface eth1 location", # "set service lldp interface eth1 'disable'", # "set service lldp interface eth1 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth1 location coordinate-based altitude '2200'", # "set service lldp interface eth1 location coordinate-based datum 'WGS84'", # "set service lldp interface eth1 location coordinate-based longitude '222.267255W'" # ] # # "after": { # "location": { # "elin": "0000000911" # }, # "name": "eth2" # }, # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location elin '0000000911' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location elin '0000000911' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 location: elin: 0000000911 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "enable": false, # "elin": "0000000911", # "name": "eth2" # }, # { # "enable": false, # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "delete service lldp interface eth2 disable", # "set service lldp interface eth2 location elin 0000000911" # ] # # "after": [ # { # "location": { # "elin": 0000000911 # }, # "name": "eth2" # } # ] # # # After state # ------------ # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # Using deleted # # Before state # ------------- # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # - name: Delete LLDP interface attributes of given interfaces. vyos.vyos.vyos_lldp_interfaces: config: - name: eth2 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "location": { # "elin": 0000000911 # }, # "name": "eth2" # } # ] # "commands": [ # "delete service lldp interface eth2" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep lldp # set service 'lldp' # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # - name: Gather listed lldp interfaces from running configuration vyos.vyos.vyos_lldp_interfaces: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] # # # After state: # ------------- # # vyos@192# run show configuration commands | grep lldp # set service lldp interface eth1 location elin '0000000911' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_lldp_interfaces: config: - name: eth1 location: elin: 0000000911 - name: eth2 location: coordinate_based: altitude: 2200 datum: WGS84 longitude: 222.267255W latitude: 33.524449N state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set service lldp interface eth1 location elin '0000000911'", # "set service lldp interface eth1", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2" # ] # Using parsed # # - name: Parsed the commands to provide structured configuration. vyos.vyos.vyos_lldp_interfaces: running_config: "set service lldp interface eth1 location elin '0000000911' set service lldp interface eth2 location coordinate-based altitude '2200' set service lldp interface eth2 location coordinate-based datum 'WGS84' set service lldp interface eth2 location coordinate-based latitude '33.524449N' set service lldp interface eth2 location coordinate-based longitude '222.267255W'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "elin": "0000000911" # }, # "name": "eth1" # } # ] """ RETURN = """ before: description: The configuration as structured data prior to module invocation. returned: always type: list sample: > The configuration returned will always be in the same format of the parameters above. after: description: The configuration as structured data after module completion. returned: when changed type: list sample: > The configuration returned will always be in the same format of the parameters above. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - "set service lldp interface eth2 'disable'" - "delete service lldp interface eth1 location" """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.lldp_interfaces.lldp_interfaces import ( Lldp_interfacesArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.lldp_interfaces.lldp_interfaces import ( Lldp_interfaces, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Lldp_interfacesArgs.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Lldp_interfaces(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_logging_global.py b/plugins/modules/vyos_logging_global.py index 9479e7b2..3380b9ea 100644 --- a/plugins/modules/vyos_logging_global.py +++ b/plugins/modules/vyos_logging_global.py @@ -1,785 +1,785 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2024 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) """ The module file for vyos_logging_global """ from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_logging_global version_added: 2.4.0 short_description: Logging resource module description: This module manages the logging attributes of Vyos network devices author: Sagar Paul (@KB-perByte) notes: - - Tested against vyos 1.3.8+ + - Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(network_cli). - The Configuration defaults of the Vyos network devices are supposed to hinder idempotent behavior of plays options: config: description: A list containing dictionary of logging options type: dict suboptions: console: description: logging to serial console type: dict suboptions: state: &state_config description: enable or disable the command type: str choices: - enabled - disabled facilities: description: facility configurations for console type: list elements: dict suboptions: facility: &facility description: Facility for logging type: str choices: - all - auth - authpriv - cron - daemon - kern - lpr - mail - mark - news - protocols - security - syslog - user - uucp - local0 - local1 - local2 - local3 - local4 - local5 - local6 - local7 severity: &severity description: logging level type: str choices: - emerg - alert - crit - err - warning - notice - info - debug - all files: description: logging to file type: list elements: dict suboptions: path: description: file name or path type: str archive: &archive description: Log file size and rotation characteristics type: dict suboptions: state: *state_config file_num: description: Number of saved files (default is 5) type: int size: description: Size of log files (in kilobytes, default is 256) type: int facilities: ¶ms description: facility configurations type: list elements: dict suboptions: facility: *facility severity: *severity global_params: description: logging to serial console type: dict suboptions: state: *state_config archive: *archive facilities: *params marker_interval: description: time interval how often a mark message is being sent in seconds (default is 1200) type: int preserve_fqdn: description: uses FQDN for logging type: bool hosts: description: logging to serial console type: list elements: dict suboptions: port: description: Destination port (1-65535) type: int facilities: description: facility configurations for host type: list elements: dict suboptions: facility: *facility severity: *severity protocol: description: syslog communication protocol. Version 1.3 and below. type: str choices: - udp - tcp hostname: description: Remote host name or IP address type: str protocol: description: syslog communication protocol. Version 1.4+ type: str choices: - udp - tcp syslog: description: logging syslog type: dict suboptions: state: *state_config users: description: logging to file type: list elements: dict suboptions: username: description: user login name type: str facilities: *params running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VYOS device by executing the command B(show configuration commands | grep syslog). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: choices: - merged - replaced - overridden - deleted - gathered - parsed - rendered default: merged description: - The state the configuration should be left in - The states I(replaced) and I(overridden) have identical behaviour for this module. - Refer to examples for more details. type: str """ EXAMPLES = """ # Using state: merged # Before state: # ------------- # vyos:~$show configuration commands | grep syslog - name: Apply the provided configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local7 severity: err files: - path: logFile archive: file_num: 2 facilities: - facility: local6 severity: emerg hosts: - hostname: 172.16.0.1 facilities: - facility: local7 severity: all - facility: all protocol: udp port: 223 users: - username: vyos facilities: - facility: local7 severity: debug global_params: archive: file_num: 2 size: 111 facilities: - facility: cron severity: debug marker_interval: 111 preserve_fqdn: true state: merged # Commands Fired: # --------------- # "commands": [ # "set system syslog console facility local7 level err", # "set system syslog file logFile archive file 2", # "set system syslog host 172.16.0.1 facility local7 level all", # "set system syslog file logFile facility local6 level emerg", # "set system syslog host 172.16.0.1 facility all protocol udp", # "set system syslog user vyos facility local7 level debug", # "set system syslog host 172.16.0.1 port 223", # "set system syslog global facility cron level debug", # "set system syslog global archive file 2", # "set system syslog global archive size 111", # "set system syslog global marker interval 111", # "set system syslog global preserve-fqdn" # ], # After state: # ------------ # vyos:~$ show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' # Using state: deleted # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' - name: delete the existing configuration vyos.vyos.vyos_logging_global: state: deleted # Commands Fired: # --------------- # "commands": [ # "delete system syslog" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # Using state: overridden # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user vyos facility local7 level 'debug' - name: Override the current configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: all - facility: local7 severity: err - facility: news severity: debug files: - path: logFileNew hosts: - hostname: 172.16.0.2 facilities: - facility: local5 severity: all global_params: archive: file_num: 10 state: overridden # Commands Fired: # --------------- # "commands": [ # "delete system syslog file logFile", # "delete system syslog global facility cron", # "delete system syslog host 172.16.0.1", # "delete system syslog user vyos", # "set system syslog console facility all", # "set system syslog console facility news level debug", # "set system syslog file logFileNew", # "set system syslog host 172.16.0.2 facility local5 level all", # "set system syslog global archive file 10", # "delete system syslog global archive size 111", # "delete system syslog global marker", # "delete system syslog global preserve-fqdn" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility all # set system syslog console facility local7 level 'err' # set system syslog console facility news level 'debug' # set system syslog file logFileNew # set system syslog global archive file '10' # set system syslog host 172.16.0.2 facility local5 level 'all' # Using state: replaced # Before state: # ------------- # vyos:~$show configuration commands | grep syslog # set system syslog console facility all # set system syslog console facility local7 level 'err' # set system syslog console facility news level 'debug' # set system syslog file logFileNew # set system syslog global archive file '10' # set system syslog host 172.16.0.2 facility local5 level 'all' - name: Replace with the provided configuration register: result vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local6 users: - username: paul facilities: - facility: local7 severity: err state: replaced # Commands Fired: # --------------- # "commands": [ # "delete system syslog console facility all", # "delete system syslog console facility local7", # "delete system syslog console facility news", # "delete system syslog file logFileNew", # "delete system syslog global archive file 10", # "delete system syslog host 172.16.0.2", # "set system syslog console facility local6", # "set system syslog user paul facility local7 level err" # ], # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility local6 # set system syslog user paul facility local7 level 'err' # Using state: gathered - name: Gather logging config vyos.vyos.vyos_logging_global: state: gathered # Module Execution Result: # ------------------------ # "gathered": { # "console": { # "facilities": [ # { # "facility": "local6" # }, # { # "facility": "local7", # "severity": "err" # } # ] # }, # "files": [ # { # "archive": { # "file_num": 2 # }, # "facilities": [ # { # "facility": "local6", # "severity": "emerg" # } # ], # "path": "logFile" # } # ], # "global_params": { # "archive": { # "file_num": 2, # "size": 111 # }, # "facilities": [ # { # "facility": "cron", # "severity": "debug" # } # ], # "marker_interval": 111, # "preserve_fqdn": true # }, # "hosts": [ # { # "facilities": [ # { # "facility": "all", # "protocol": "udp" # }, # { # "facility": "local7", # "severity": "all" # } # ], # "hostname": "172.16.0.1", # "port": 223 # } # ], # "users": [ # { # "facilities": [ # { # "facility": "local7", # "severity": "err" # } # ], # "username": "paul" # }, # { # "facilities": [ # { # "facility": "local7", # "severity": "debug" # } # ], # "username": "vyos" # } # ] # }, # After state: # ------------ # vyos:~$show configuration commands | grep syslog # set system syslog console facility local6 # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user paul facility local7 level 'err' # set system syslog user vyos facility local7 level 'debug' # Using state: rendered - name: Render the provided configuration vyos.vyos.vyos_logging_global: config: console: facilities: - facility: local7 severity: err files: - path: logFile archive: file_num: 2 facilities: - facility: local6 severity: emerg hosts: - hostname: 172.16.0.1 facilities: - facility: local7 severity: all - facility: all protocol: udp port: 223 users: - username: vyos facilities: - facility: local7 severity: debug global_params: archive: file_num: 2 size: 111 facilities: - facility: cron severity: debug marker_interval: 111 preserve_fqdn: true state: rendered # Module Execution Result: # ------------------------ # "rendered": [ # "set system syslog console facility local7 level err", # "set system syslog file logFile facility local6 level emerg", # "set system syslog file logFile archive file 2", # "set system syslog host 172.16.0.1 facility local7 level all", # "set system syslog host 172.16.0.1 facility all protocol udp", # "set system syslog host 172.16.0.1 port 223", # "set system syslog user vyos facility local7 level debug", # "set system syslog global facility cron level debug", # "set system syslog global archive file 2", # "set system syslog global archive size 111", # "set system syslog global marker interval 111", # "set system syslog global preserve-fqdn" # ] # Using state: parsed # File: parsed.cfg # ---------------- # set system syslog console facility local6 # set system syslog console facility local7 level 'err' # set system syslog file logFile archive file '2' # set system syslog file logFile facility local6 level 'emerg' # set system syslog global archive file '2' # set system syslog global archive size '111' # set system syslog global facility cron level 'debug' # set system syslog global marker interval '111' # set system syslog global preserve-fqdn # set system syslog host 172.16.0.1 facility all protocol 'udp' # set system syslog host 172.16.0.1 facility local7 level 'all' # set system syslog host 172.16.0.1 port '223' # set system syslog user paul facility local7 level 'err' # set system syslog user vyos facility local7 level 'debug' - name: Parse the provided configuration vyos.vyos.vyos_logging_global: running_config: "{{ lookup('file', 'parsed_vyos.cfg') }}" state: parsed # Module Execution Result: # ------------------------ # "parsed": { # "console": { # "facilities": [ # { # "facility": "local6" # }, # { # "facility": "local7", # "severity": "err" # } # ] # }, # "files": [ # { # "archive": { # "file_num": 2 # }, # "facilities": [ # { # "facility": "local6", # "severity": "emerg" # } # ], # "path": "logFile" # } # ], # "global_params": { # "archive": { # "file_num": 2, # "size": 111 # }, # "facilities": [ # { # "facility": "cron", # "severity": "debug" # } # ], # "marker_interval": 111, # "preserve_fqdn": true # }, # "hosts": [ # { # "facilities": [ # { # "facility": "all", # "protocol": "udp" # }, # { # "facility": "local7", # "severity": "all" # } # ], # "hostname": "172.16.0.1", # "port": 223 # } # ], # "users": [ # { # "facilities": [ # { # "facility": "local7", # "severity": "err" # } # ], # "username": "paul" # }, # { # "facilities": [ # { # "facility": "local7", # "severity": "debug" # } # ], # "username": "vyos" # } # ] # } # } """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: - set system syslog console facility local7 level err - set system syslog host 172.16.0.1 port 223 - set system syslog global archive size 111 rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - set system syslog host 172.16.0.1 port 223 - set system syslog user vyos facility local7 level debug - set system syslog global facility cron level debu gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.logging_global.logging_global import ( Logging_globalArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.logging_global.logging_global import ( Logging_global, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ module = AnsibleModule( argument_spec=Logging_globalArgs.argument_spec, mutually_exclusive=[["config", "running_config"]], required_if=[ ["state", "merged", ["config"]], ["state", "replaced", ["config"]], ["state", "overridden", ["config"]], ["state", "rendered", ["config"]], ["state", "parsed", ["running_config"]], ], supports_check_mode=True, ) result = Logging_global(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_ntp_global.py b/plugins/modules/vyos_ntp_global.py index cad08a68..6461a32b 100644 --- a/plugins/modules/vyos_ntp_global.py +++ b/plugins/modules/vyos_ntp_global.py @@ -1,812 +1,812 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2024 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) """ The module file for vyos_ntp_global """ from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_ntp_global version_added: 1.0.0 short_description: NTP global resource module description: - This module manages ntp configuration on devices running Vyos author: - Varshitha Yataluru (@YVarshitha) notes: -- Tested against vyos 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(network_cli). - "VyOS v.1.4+ uses chronyd, and path changes from `system` to `service`" options: config: description: List of configurations for ntp module type: dict suboptions: allow_clients: description: Network Time Protocol (NTP) server options type: list elements: str listen_addresses: description: local IP addresses for service to listen on type: list elements: str servers: description: Network Time Protocol (NTP) server type: list elements: dict suboptions: server: description: server name or address for NTP type: str options: description: - "server options for NTP" - "`pool` replaces `dynamic` in Vyos 1.3" - "`preempt` is only available in Vyos 1.3 and earlier" - "`nts` was added in Vyos 1.4" - "`ptp` and `interleave` were added in Vyos 1.5" type: list elements: str choices: - dynamic - noselect - pool - preempt - prefer - nts - ptp - interleave running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VYOS device by executing the command B(show configuration commands | grep ntp). - The states I(replaced) and I(overridden) have identical behaviour for this module. - The state I(parsed) reads the configuration from C(show configuration commands | grep ntp) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state the configuration should be left in. type: str choices: - deleted - merged - overridden - replaced - gathered - rendered - parsed default: merged """ EXAMPLES = """ # # ------------------- # # 1. Using merged # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Replace the existing ntp config with the new config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.6.6.0/24 listen_addresses: - 10.1.3.1 servers: - server: 203.0.113.0 options: - prefer # Task output: # ------------- # "after": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # }, # "changed": true, # "commands": [ # "set service ntp allow-clients address 10.6.6.0/24", # "set service ntp listen-address 10.1.3.1", # "set service ntp server 203.0.113.0 prefer" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 2. Using replaced # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.4.9.0/24' # set service ntp allow-clients address '10.4.7.0/24' # set service ntp allow-clients address '10.1.2.0/24' # set service ntp allow-clients address '10.2.3.0/24' # set service ntp listen-address '10.1.9.16' # set service ntp listen-address '10.5.3.2' # set service ntp listen-address '10.7.9.21' # set service ntp listen-address '10.8.9.4' # set service ntp listen-address '10.4.5.1' # set service ntp server 10.3.6.5 noselect # set service ntp server 10.3.6.5 dynamic # set service ntp server 10.3.6.5 preempt # set service ntp server 10.3.6.5 prefer # set service ntp server server4 noselect # set service ntp server server4 dynamic # set service ntp server server5 # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Replace the existing ntp config with the new config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.6.6.0/24 listen_addresses: - 10.1.3.1 servers: - server: 203.0.113.0 options: - prefer state: replaced # # Task output: # # ------------- # "after": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.4.7.0/24", # "10.2.3.0/24", # "10.1.2.0/24", # "10.4.9.0/24" # ], # "listen_addresses": [ # "10.7.9.21", # "10.4.5.1", # "10.5.3.2", # "10.8.9.4", # "10.1.9.16" # ], # "servers": [ # { # "server": "10.3.6.5", # "options": [ # "noselect", # "dynamic", # "preempt", # "prefer" # ] # }, # { # "server": "server4", # "options": [ # "noselect", # "dynamic" # ] # }, # { # "server": "server5" # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients address 10.4.7.0/24", # "delete service ntp allow-clients address 10.2.3.0/24", # "delete service ntp allow-clients address 10.1.2.0/24", # "delete service ntp allow-clients address 10.4.9.0/24", # "delete service ntp listen-address 10.7.9.21", # "delete service ntp listen-address 10.4.5.1", # "delete service ntp listen-address 10.5.3.2", # "delete service ntp listen-address 10.8.9.4", # "delete service ntp listen-address 10.1.9.16", # "delete service ntp server 10.3.6.5", # "delete service ntp server server4", # "delete service ntp server server5", # "set service ntp allow-clients address 10.6.6.0/24", # "set service ntp listen-address 10.1.3.1", # "set service ntp server 203.0.113.0 prefer" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 3. Using overridden # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.6.6.0/24' # set service ntp listen-address '10.1.3.1' # set service ntp server 203.0.113.0 prefer, # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Override ntp config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.3.3.0/24 listen_addresses: - 10.7.8.1 servers: - server: server1 options: - dynamic - prefer - server: server2 options: - noselect - preempt - server: serv state: overridden # # Task output: # # ------------- # "after": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.6.6.0/24" # ], # "listen_addresses": [ # "10.1.3.1" # ], # "servers": [ # { # "server": "ser", # "options": [ # "prefer" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients address 10.6.6.0/24", # "delete service ntp listen-address 10.1.3.1", # "delete service ntp server ser", # "set service ntp allow-clients address 10.3.3.0/24", # "set service ntp listen-address 10.7.8.1", # "set service ntp server server1 dynamic", # "set service ntp server server1 prefer", # "set service ntp server server2 noselect", # "set service ntp server server2 preempt", # "set service ntp server serv" # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # 4. Using gathered # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Gather ntp config vyos.vyos.vyos_ntp_global: state: gathered # # Task output: # # ------------- # "gathered": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # } # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 5. Using deleted # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp allow-clients address '10.3.3.0/24' # set service ntp listen-address '10.7.8.1' # set service ntp server serv # set service ntp server server1 dynamic # set service ntp server server1 prefer # set service ntp server server2 noselect # set service ntp server server2 preempt # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # Task # # ------------- - name: Delete ntp config vyos.vyos.vyos_ntp_global: state: deleted # # Task output: # # ------------- # "after": { # "servers": [ # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "before": { # "allow_clients": [ # "10.3.3.0/24" # ], # "listen_addresses": [ # "10.7.8.1" # ], # "servers": [ # { # "server": "serv" # }, # { # "server": "server1", # "options": [ # "dynamic", # "prefer" # ] # }, # { # "server": "server2", # "options": [ # "noselect", # "preempt" # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # ] # }, # "changed": true, # "commands": [ # "delete service ntp allow-clients", # "delete service ntp listen-address", # "delete service ntp server serv", # "delete service ntp server server1", # "delete service ntp server server2" # # ] # After state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # # ------------------- # # 6. Using rendered # # ------------------- # # Before state: # # ------------- # vyos@vyos:~$ show configuration commands | grep ntp # set service ntp server time1.vyos.net # set service ntp server time2.vyos.net # set service ntp server time3.vyos.net # vyos@vyos:~$ # Task # ------------- - name: Render ntp config vyos.vyos.vyos_ntp_global: config: allow_clients: - 10.7.7.0/24 - 10.8.8.0/24 listen_addresses: - 10.7.9.1 servers: - server: server7 - server: server45 options: - noselect - prefer - pool - server: time1.vyos.net - server: time2.vyos.net - server: time3.vyos.net state: rendered # # Task output: # # ------------- # "rendered": [ # "set service ntp allow-clients address 10.7.7.0/24", # "set service ntp allow-clients address 10.8.8.0/24", # "set service ntp listen-address 10.7.9.1", # "set service ntp server server7", # "set service ntp server server45 noselect", # "set service ntp server server45 prefer", # "set service ntp server server45 pool", # "set service ntp server time1.vyos.net", # "set service ntp server time2.vyos.net", # "set service ntp server time3.vyos.net" # ] # # ------------------- # # 7. Using parsed # # ------------------- # # sample_config.cfg: # # ------------- # "set service ntp allow-clients address 10.7.7.0/24", # "set service ntp listen-address 10.7.9.1", # "set service ntp server server45 noselect", # "set service ntp allow-clients addres 10.8.6.0/24", # "set service ntp listen-address 10.5.4.1", # "set service ntp server server45 dynamic", # "set service ntp server time1.vyos.net", # "set service ntp server time2.vyos.net", # "set service ntp server time3.vyos.net" # Task: # ------------- - name: Parse externally provided ntp configuration vyos.vyos.vyos_ntp_global: running_config: "{{ lookup('file', './sample_config.cfg') }}" state: parsed # # Task output: # # ------------- # parsed = { # "allow_clients": [ # "10.7.7.0/24", # "10.8.6.0/24 # ], # "listen_addresses": [ # "10.5.4.1", # "10.7.9.1" # ], # "servers": [ # { # "server": "server45", # "options": [ # "noselect", # "dynamic" # # ] # }, # { # "server": "time1.vyos.net" # }, # { # "server": "time2.vyos.net" # }, # { # "server": "time3.vyos.net" # } # # ] # } """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: - set system ntp server server1 dynamic - set system ntp server server1 prefer - set system ntp server server2 noselect - set system ntp server server2 preempt - set system ntp server server_add preempt rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - set system ntp server server1 dynamic - set system ntp server server1 prefer - set system ntp server server2 noselect - set system ntp server server2 preempt - set system ntp server server_add preempt gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.ntp_global.ntp_global import ( Ntp_globalArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.ntp_global.ntp_global import ( Ntp_global, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ module = AnsibleModule( argument_spec=Ntp_globalArgs.argument_spec, mutually_exclusive=[["config", "running_config"]], required_if=[ ["state", "merged", ["config"]], ["state", "replaced", ["config"]], ["state", "overridden", ["config"]], ["state", "rendered", ["config"]], ["state", "parsed", ["running_config"]], ], supports_check_mode=True, ) result = Ntp_global(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_ospf_interfaces.py b/plugins/modules/vyos_ospf_interfaces.py index f86acb7a..6a065f17 100644 --- a/plugins/modules/vyos_ospf_interfaces.py +++ b/plugins/modules/vyos_ospf_interfaces.py @@ -1,948 +1,949 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2024 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) """ The module file for vyos_ospf_interfaces """ from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_ospf_interfaces version_added: 1.2.0 short_description: OSPF Interfaces Resource Module. description: - This module manages OSPF configuration of interfaces on devices running VYOS. +- The provided examples of commands are valid for VyOS 1.4+ author: Gomathi Selvi Srinivasan (@GomathiselviS) options: config: description: A list of OSPF configuration for interfaces. type: list elements: dict suboptions: name: description: - Name/Identifier of the interface. type: str address_family: description: - OSPF settings on the interfaces in address-family context. type: list elements: dict suboptions: afi: description: - Address Family Identifier (AFI) for OSPF settings on the interfaces. type: str choices: ['ipv4', 'ipv6'] required: true authentication: description: - Authentication settings on the interface. type: dict suboptions: plaintext_password: description: - Plain Text password. type: str md5_key: description: - md5 parameters. type: dict suboptions: key_id: description: - key id. type: int key: description: - md5 key. type: str bandwidth: description: - Bandwidth of interface (kilobits/sec) type: int cost: description: - metric associated with interface. type: int dead_interval: description: - Time interval to detect a dead router. type: int hello_interval: description: - Timer interval between transmission of hello packets. type: int mtu_ignore: description: - if True, Disable MTU check for Database Description packets. type: bool network: description: - Interface type. type: str priority: description: - Interface priority. type: int retransmit_interval: description: - LSA retransmission interval. type: int transmit_delay: description: - LSA transmission delay. type: int ifmtu: description: - interface MTU. type: int instance: description: - Instance ID. type: str passive: description: - If True, disables forming adjacency. type: bool running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VYOS device by executing the command B(show configuration commands | match "set interfaces"). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state the configuration should be left in. type: str choices: - merged - replaced - overridden - deleted - gathered - parsed - rendered default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # @vyos:~$ show configuration commands | match "ospf" - name: Merge provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: true state: merged # After State: # -------------- # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' # "after": [ # " # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ -# "set interfaces ethernet eth1 ip ospf transmit-delay 50", -# "set interfaces ethernet eth1 ip ospf priority 26", -# "set interfaces ethernet eth1 ip ospf network point-to-point", -# "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", -# "set interfaces bonding bond2 ip ospf transmit-delay 45", -# "set interfaces bonding bond2 ip ospf bandwidth 70", -# "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", -# "set interfaces bonding bond2 ipv6 ospfv3 passive" +# "set protocols ospf interface eth1 transmit-delay 50", +# "set protocols ospf interface eth1 priority 26", +# "set protocols ospf interface eth1 network point-to-point", +# "set protocols ospfv3 interface eth1 dead-interval 39", +# "set protocols ospf interface bond2 transmit-delay 45", +# "set protocols ospf interface bond2 bandwidth 70", +# "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key 1111111111232345", +# "set protocols ospfv3 interface bond2 passive" # ], # Using replaced: # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' - name: Replace provided configuration with device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 - afi: "ipv6" passive: true state: replaced # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf cost '100' -# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 cost '100' +# set protocols ospfv3 interface eth1 ifmtu '33' # vyos@vyos:~$ # Module Execution # ---------------- # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ -# "set interfaces ethernet eth1 ip ospf cost 100", -# "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33", -# "delete interfaces ethernet eth1 ip ospf network point-to-point", -# "delete interfaces ethernet eth1 ip ospf priority 26", -# "delete interfaces ethernet eth1 ip ospf transmit-delay 50", -# "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", -# "delete interfaces bonding bond2 ip ospf authentication", -# "delete interfaces bonding bond2 ip ospf bandwidth 70" +# "set protocols ospf interface eth1 cost 100", +# "set protocols ospfv3 interface eth1 ifmtu 33", +# "delete protocols ospf interface eth1 network point-to-point", +# "delete protocols ospf interface eth1 priority 26", +# "delete protocols ospf interface eth1 transmit-delay 50", +# "delete protocols ospfv3 interface eth1 dead-interval 39", +# "delete protocols ospf interface bond2 authentication", +# "delete protocols ospf interface bond2 bandwidth 70" # ], # # Using Overridden: # ----------------- # Before State: # ------------ # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf cost '100' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' -# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 cost '100' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' +# set protocols ospfv3 interface eth1 ifmtu '33' # vyos@vyos:~$ - name: Override device configuration with provided configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" address_family: - afi: "ipv4" cost: 100 - afi: "ipv6" ifmtu: 33 passive: true state: overridden # After State: # ----------- # 200~vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces ethernet eth0 ip ospf cost '100' -# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' -# set interfaces ethernet eth0 ipv6 ospfv3 'passive' +# set protocols ospf interface eth0 cost '100' +# set protocols ospfv3 interface eth0 ifmtu '33' +# set protocols ospfv3 interface eth0 'passive' # vyos@vyos:~$ # # # "after": [ # { # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100, # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39, # "ifmtu": 33 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ -# "delete interfaces bonding bond2 ip ospf", -# "delete interfaces bonding bond2 ipv6 ospfv3", -# "delete interfaces ethernet eth1 ip ospf", -# "delete interfaces ethernet eth1 ipv6 ospfv3", -# "set interfaces ethernet eth0 ip ospf cost 100", -# "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33", -# "set interfaces ethernet eth0 ipv6 ospfv3 passive" +# "delete protocols ospf interface bond2", +# "delete protocols ospfv3 interface bond2", +# "delete protocols ospf interface eth1", +# "delete protocols ospfv3 interface eth1", +# "set protocols ospf interface eth0 cost 100", +# "set protocols ospfv3 interface eth0 ifmtu 33", +# "set protocols ospfv3 interface eth0 passive" # ], # # Using deleted: # ------------- # before state: # ------------- # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth0 ip ospf cost '100' -# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33' -# set interfaces ethernet eth0 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth0 cost '100' +# set protocols ospfv3 interface eth0 ifmtu '33' +# set protocols ospfv3 interface eth0 'passive' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ - name: Delete device configuration vyos.vyos.vyos_ospf_interfaces: config: - name: "eth0" state: deleted # After State: # ----------- # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ # # # "after": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "before": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 100 # }, # { # "afi": "ipv6", # "ifmtu": 33, # "passive": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], # "changed": true, # "commands": [ -# "delete interfaces ethernet eth0 ip ospf", -# "delete interfaces ethernet eth0 ipv6 ospfv3" +# "delete protocols ospf interface eth0", +# "delete protocols ospfv3 interface eth0" # ], # # Using parsed: # parsed.cfg: -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth0 ip ospf cost '50' -# set interfaces ethernet eth0 ip ospf priority '26' -# set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33' -# set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth0 cost '50' +# set protocols ospf interface eth0 priority '26' +# set protocols ospfv3 interface eth0 instance-id '33' +# set protocols ospfv3 interface eth0 'mtu-ignore' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' # - name: parse configs vyos.vyos.vyos_ospf_interfaces: running_config: "{{ lookup('file', './parsed.cfg') }}" state: parsed # Module Execution: # ---------------- # "parsed": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "address_family": [ # { # "afi": "ipv4", # "cost": 50, # "priority": 26 # }, # { # "afi": "ipv6", # "instance": "33", # "mtu_ignore": true # } # ], # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # } # ] # Using rendered: # -------------- - name: Render vyos.vyos.vyos_ospf_interfaces: config: - name: "eth1" address_family: - afi: "ipv4" transmit_delay: 50 priority: 26 network: "point-to-point" - afi: "ipv6" dead_interval: 39 - name: "bond2" address_family: - afi: "ipv4" transmit_delay: 45 bandwidth: 70 authentication: md5_key: key_id: 10 key: "1111111111232345" - afi: "ipv6" passive: true state: rendered # Module Execution: # ---------------- # "rendered": [ -# "set interfaces ethernet eth1 ip ospf transmit-delay 50", -# "set interfaces ethernet eth1 ip ospf priority 26", -# "set interfaces ethernet eth1 ip ospf network point-to-point", -# "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39", -# "set interfaces bonding bond2 ip ospf transmit-delay 45", -# "set interfaces bonding bond2 ip ospf bandwidth 70", -# "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345", -# "set interfaces bonding bond2 ipv6 ospfv3 passive" +# "set protocols ospf interface eth1 transmit-delay 50", +# "set protocols ospf interface eth1 priority 26", +# "set protocols ospf interface eth1 network point-to-point", +# "set protocols ospfv3 interface eth1 dead-interval 39", +# "set protocols ospf interface bond2 transmit-delay 45", +# "set protocols ospf interface bond2 bandwidth 70", +# "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key 1111111111232345", +# "set protocols ospfv3 interface bond2 passive" # ] # # Using Gathered: # -------------- # Native Config: # vyos@vyos:~$ show configuration commands | match "ospf" -# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345' -# set interfaces bonding bond2 ip ospf bandwidth '70' -# set interfaces bonding bond2 ip ospf transmit-delay '45' -# set interfaces bonding bond2 ipv6 ospfv3 'passive' -# set interfaces ethernet eth1 ip ospf network 'point-to-point' -# set interfaces ethernet eth1 ip ospf priority '26' -# set interfaces ethernet eth1 ip ospf transmit-delay '50' -# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39' +# set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345' +# set protocols ospf interface bond2 bandwidth '70' +# set protocols ospf interface bond2 transmit-delay '45' +# set protocols ospfv3 interface bond2 'passive' +# set protocols ospf interface eth1 network 'point-to-point' +# set protocols ospf interface eth1 priority '26' +# set protocols ospf interface eth1 transmit-delay '50' +# set protocols ospfv3 interface eth1 dead-interval '39' # vyos@vyos:~$ - name: gather configs vyos.vyos.vyos_ospf_interfaces: state: gathered # Module Execution: # ----------------- # "gathered": [ # { # "address_family": [ # { # "afi": "ipv4", # "authentication": { # "md5_key": { # "key": "1111111111232345", # "key_id": 10 # } # }, # "bandwidth": 70, # "transmit_delay": 45 # }, # { # "afi": "ipv6", # "passive": true # } # ], # "name": "bond2" # }, # { # "name": "eth0" # }, # { # "address_family": [ # { # "afi": "ipv4", # "network": "point-to-point", # "priority": 26, # "transmit_delay": 50 # }, # { # "afi": "ipv6", # "dead_interval": 39 # } # ], # "name": "eth1" # }, # { # "name": "eth2" # }, # { # "name": "eth3" # } # ], """ RETURN = """ before: description: The configuration prior to the module execution. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: dict sample: > This output will always be in the same format as the module argspec. after: description: The resulting configuration after module execution. returned: when changed type: dict sample: > This output will always be in the same format as the module argspec. commands: description: The set of commands pushed to the remote device. returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged) type: list sample: - - "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'" - - "set interfaces bonding bond2 ip ospf bandwidth '70'" - - "set interfaces bonding bond2 ip ospf transmit-delay '45'" + - "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345'" + - "set protocols ospf interface bond2 bandwidth '70'" + - "set protocols ospf interface bond2 transmit-delay '45'" rendered: description: The provided configuration in the task rendered in device-native format (offline). returned: when I(state) is C(rendered) type: list sample: - - "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'" - - "set interfaces bonding bond2 ip ospf bandwidth '70'" - - "set interfaces bonding bond2 ip ospf transmit-delay '45'" + - "set protocols ospf interface bond2 authentication md5 key-id 10 md5-key '1111111111232345'" + - "set protocols ospf interface bond2 bandwidth '70'" + - "set protocols ospf interface bond2 transmit-delay '45'" gathered: description: Facts about the network resource gathered from the remote device as structured data. returned: when I(state) is C(gathered) type: list sample: > This output will always be in the same format as the module argspec. parsed: description: The device native config provided in I(running_config) option parsed into structured data as per module argspec. returned: when I(state) is C(parsed) type: list sample: > This output will always be in the same format as the module argspec. """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.ospf_interfaces.ospf_interfaces import ( Ospf_interfacesArgs, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.ospf_interfaces.ospf_interfaces import ( Ospf_interfaces, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ module = AnsibleModule( argument_spec=Ospf_interfacesArgs.argument_spec, mutually_exclusive=[["config", "running_config"]], required_if=[ ["state", "merged", ["config"]], ["state", "replaced", ["config"]], ["state", "overridden", ["config"]], ["state", "rendered", ["config"]], ["state", "parsed", ["running_config"]], ], supports_check_mode=True, ) result = Ospf_interfaces(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_ospfv2.py b/plugins/modules/vyos_ospfv2.py index a72b7fd2..000e4d39 100644 --- a/plugins/modules/vyos_ospfv2.py +++ b/plugins/modules/vyos_ospfv2.py @@ -1,1826 +1,1827 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_ospfv2 """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_ospfv2 version_added: '1.0.0' short_description: OSPFv2 resource module description: This resource module configures and manages attributes of OSPFv2 routes on VyOS network devices. notes: -- Tested against VyOS 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 +- The provided examples of commands are valid for VyOS 1.4+ - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). author: - Rohit Thakur (@rohitthakur2590) options: config: description: A provided OSPFv2 route configuration. type: dict suboptions: areas: description: OSPFv2 area. type: list elements: dict suboptions: area_id: description: OSPFv2 area identity. type: str area_type: description: Area type. type: dict suboptions: normal: description: Normal OSPFv2 area. type: bool nssa: description: NSSA OSPFv2 area. type: dict suboptions: set: description: Enabling NSSA. type: bool default_cost: description: Summary-default cost of NSSA area. type: int no_summary: description: Do not inject inter-area routes into stub. type: bool translate: description: NSSA-ABR. type: str choices: [always, candidate, never] stub: description: Stub OSPFv2 area. type: dict suboptions: set: description: Enabling stub. type: bool default_cost: description: Summary-default cost of stub area. type: int no_summary: description: Do not inject inter-area routes into stub. type: bool authentication: description: OSPFv2 area authentication type. type: str choices: [plaintext-password, md5] network: description: OSPFv2 network. type: list elements: dict suboptions: address: required: true description: OSPFv2 IPv4 network address. type: str range: description: Summarize routes matching prefix (border routers only). type: list elements: dict suboptions: address: description: border router IPv4 address. type: str cost: description: Metric for this range. type: int not_advertise: description: Don't advertise this range. type: bool substitute: description: Announce area range (IPv4 address) as another prefix. type: str shortcut: description: Area's shortcut mode. type: str choices: [default, disable, enable] virtual_link: description: Virtual link address. type: list elements: dict suboptions: address: description: virtual link address. type: str authentication: description: OSPFv2 area authentication type. type: dict suboptions: md5: description: MD5 key id based authentication. type: list elements: dict suboptions: key_id: description: MD5 key id. type: int md5_key: description: MD5 key. type: str plaintext_password: description: Plain text password. type: str dead_interval: description: Interval after which a neighbor is declared dead. type: int hello_interval: description: Interval between hello packets. type: int retransmit_interval: description: Interval between retransmitting lost link state advertisements. type: int transmit_delay: description: Link state transmit delay. type: int log_adjacency_changes: description: Log changes in adjacency state. type: str choices: [detail] max_metric: description: OSPFv2 maximum/infinite-distance metric. type: dict suboptions: router_lsa: description: Advertise own Router-LSA with infinite distance (stub router). type: dict suboptions: administrative: description: Administratively apply, for an indefinite period. type: bool on_shutdown: description: Time to advertise self as stub-router. type: int on_startup: description: Time to advertise self as stub-router type: int auto_cost: description: Calculate OSPFv2 interface cost according to bandwidth. type: dict suboptions: reference_bandwidth: description: Reference bandwidth cost in Mbits/sec. type: int default_information: description: Control distribution of default information. type: dict suboptions: originate: description: Distribute a default route. type: dict suboptions: always: description: Always advertise default route. type: bool metric: description: OSPFv2 default metric. type: int metric_type: description: OSPFv2 Metric types for default routes. type: int route_map: description: Route map references. type: str default_metric: description: Metric of redistributed routes type: int distance: description: Administrative distance. type: dict suboptions: global: description: Global OSPFv2 administrative distance. type: int ospf: description: OSPFv2 administrative distance. type: dict suboptions: external: description: Distance for external routes. type: int inter_area: description: Distance for inter-area routes. type: int intra_area: description: Distance for intra-area routes. type: int mpls_te: description: MultiProtocol Label Switching-Traffic Engineering (MPLS-TE) parameters. type: dict suboptions: enabled: description: Enable MPLS-TE functionality. type: bool router_address: description: Stable IP address of the advertising router. type: str neighbor: description: Neighbor IP address. type: list elements: dict suboptions: neighbor_id: description: Identity (number/IP address) of neighbor. type: str poll_interval: description: Seconds between dead neighbor polling interval. type: int priority: description: Neighbor priority. type: int parameters: description: OSPFv2 specific parameters. type: dict suboptions: abr_type: description: OSPFv2 ABR Type. type: str choices: [cisco, ibm, shortcut, standard] opaque_lsa: description: Enable the Opaque-LSA capability (rfc2370). type: bool rfc1583_compatibility: description: Enable rfc1583 criteria for handling AS external routes. type: bool router_id: description: Override the default router identifier. type: str passive_interface: description: Suppress routing updates on an interface. type: list elements: str passive_interface_exclude: description: Interface to exclude when using passive-interface default. type: list elements: str redistribute: description: Redistribute information from another routing protocol. type: list elements: dict suboptions: route_type: description: Route type to redistribute. type: str choices: [bgp, connected, kernel, rip, static] metric: description: Metric for redistribution routes. type: int metric_type: description: OSPFv2 Metric types. type: int route_map: description: Route map references. type: str route_map: description: Filter routes installed in local route map. type: list elements: str timers: description: Adjust routing timers. type: dict suboptions: refresh: description: Adjust refresh parameters. type: dict suboptions: timers: description: refresh timer. type: int throttle: description: Throttling adaptive timers. type: dict suboptions: spf: description: OSPFv2 SPF timers. type: dict suboptions: delay: description: Delay (msec) from first change received till SPF calculation. type: int initial_holdtime: description: Initial hold time(msec) between consecutive SPF calculations. type: int max_holdtime: description: maximum hold time (sec). type: int running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep ospf). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state the configuration should be left in. type: str choices: - merged - replaced - deleted - parsed - gathered - rendered default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - eth1 - eth2 parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: 3 area_type: nssa: set: true - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", -# "set protocols ospf passive-interface eth1", -# "set protocols ospf passive-interface eth2", +# "set protocols ospf interface 'eth1' passive", +# "set protocols ospf interface 'eth2' passive", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration to update existing running configuration vyos.vyos.vyos_ospfv2: config: areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '3' area_type: nssa: set: false - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospf area 4 area-type stub", # "set protocols ospf area 4 network 192.0.22.0/24" # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # }, # "network": [ # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using replaced # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Replace ospfv2 routes attributes configuration. vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.22.22 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - 'eth1' parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: "plaintext-password" shortcut: 'enable' - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.12.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 range: - address: 1.1.2.0/24 cost: 10 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ -# "delete protocols ospf passive-interface eth2", +# "delete protocols ospf interface 'eth2' passive", # "delete protocols ospf area 3", # "delete protocols ospf area 4 range 192.0.3.0/24 cost", # "delete protocols ospf area 4 range 192.0.3.0/24", # "delete protocols ospf area 4 range 192.0.4.0/24 cost", # "delete protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf mpls-te router-address '192.0.22.22'", # "set protocols ospf area 4 range 1.1.2.0/24 cost 10", # "set protocols ospf area 4 range 1.1.2.0/24", # "set protocols ospf area 4 network 192.0.12.0/24", # "set protocols ospf area 4 network 192.0.22.0/24", # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.12.0/24" # }, # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "1.1.2.0/24", # "cost": 10 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.22.22" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.12.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 1.1.2.0/24 cost '10' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.22.22' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' +# set protocols ospf interface 'eth1' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - 'eth1' - 'eth2' parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: 2 area_type: normal: true authentication: "plaintext-password" shortcut: enable - area_id: 3 area_type: nssa: set: true - area_id: 4 area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", -# "set protocols ospf passive-interface eth1", -# "set protocols ospf passive-interface eth2", +# "set protocols ospf interface 'eth1' passive", +# "set protocols ospf interface 'eth2' passive", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # Using parsed # # - name: Parse the commands for provided configuration vyos.vyos.vyos_ospfv2: running_config: | set protocols ospf area 2 area-type 'normal' set protocols ospf area 2 authentication 'plaintext-password' set protocols ospf area 2 shortcut 'enable' set protocols ospf area 3 area-type 'nssa' set protocols ospf area 4 area-type stub default-cost '20' set protocols ospf area 4 network '192.0.2.0/24' set protocols ospf area 4 range 192.0.3.0/24 cost '10' set protocols ospf area 4 range 192.0.4.0/24 cost '12' set protocols ospf auto-cost reference-bandwidth '2' set protocols ospf default-information originate 'always' set protocols ospf default-information originate metric '10' set protocols ospf default-information originate metric-type '2' set protocols ospf default-information originate route-map 'ingress' set protocols ospf log-adjacency-changes 'detail' set protocols ospf max-metric router-lsa 'administrative' set protocols ospf max-metric router-lsa on-shutdown '10' set protocols ospf max-metric router-lsa on-startup '10' set protocols ospf mpls-te 'enable' set protocols ospf mpls-te router-address '192.0.11.11' set protocols ospf neighbor 192.0.11.12 poll-interval '10' set protocols ospf neighbor 192.0.11.12 priority '2' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters 'opaque-lsa' set protocols ospf parameters 'rfc1583-compatibility' set protocols ospf parameters router-id '192.0.1.1' - set protocols ospf passive-interface 'eth1' - set protocols ospf passive-interface 'eth2' + set protocols ospf interface 'eth1' passive + set protocols ospf interface 'eth2' passive set protocols ospf redistribute bgp metric '10' set protocols ospf redistribute bgp metric-type '2' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # } # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Gather ospfv2 routes config with provided configurations vyos.vyos.vyos_ospfv2: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' -# set protocols ospf passive-interface 'eth1' -# set protocols ospf passive-interface 'eth2' +# set protocols ospf interface 'eth1' passive +# set protocols ospf interface 'eth2' passive # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Delete attributes of ospfv2 routes. vyos.vyos.vyos_ospfv2: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # "commands": [ # "delete protocols ospf" # ] # # "after": {} # After state # ------------ # vyos@192# run show configuration commands | grep ospf """ RETURN = """ before: description: The configuration prior to the model invocation. returned: always type: dict sample: > The configuration returned will always be in the same format of the parameters above. after: description: The resulting configuration model invocation. returned: when changed type: dict sample: > The configuration returned will always be in the same format of the parameters above. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - "set protocols ospf parameters router-id 192.0.1.1" - - "set protocols ospf passive-interface 'eth1'" + - "set protocols ospf interface 'eth1' passive" """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.ospfv2.ospfv2 import ( Ospfv2Args, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.ospfv2.ospfv2 import ( Ospfv2, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Ospfv2Args.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Ospfv2(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_ospfv3.py b/plugins/modules/vyos_ospfv3.py index dbe9a857..fcb9d288 100644 --- a/plugins/modules/vyos_ospfv3.py +++ b/plugins/modules/vyos_ospfv3.py @@ -1,692 +1,692 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # Copyright 2019 Red Hat # GNU General Public License v3.0+ # (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) ############################################# # WARNING # ############################################# # # This file is auto generated by the resource # module builder playbook. # # Do not edit this file manually. # # Changes to this file will be over written # by the resource module builder. # # Changes should be made in the model used to # generate this file or in the resource module # builder template. # ############################################# """ The module file for vyos_ospfv3 """ from __future__ import absolute_import, division, print_function __metaclass__ = type ANSIBLE_METADATA = { "metadata_version": "1.1", "status": ["preview"], "supported_by": "network", } DOCUMENTATION = """ --- module: vyos_ospfv3 version_added: '1.0.0' short_description: OSPFv3 resource module description: This resource module configures and manages attributes of OSPFv3 routes on VyOS network devices. author: - Rohit Thakur (@rohitthakur2590) notes: -- Tested against VyOS 1.3.8 +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). options: config: description: A provided OSPFv3 route configuration. type: dict suboptions: areas: description: OSPFv3 area. type: list elements: dict suboptions: area_id: description: OSPFv3 Area name/identity. type: str export_list: description: Name of export-list. type: str import_list: description: Name of import-list. type: str interface: description: Enable OSPVv3 on an interface for this area. aliases: ['interfaces'] type: list elements: dict suboptions: name: description: Interface name. type: str range: description: Summarize routes matching prefix (border routers only). type: list elements: dict suboptions: address: description: border router IPv4 address. type: str advertise: description: Advertise this range. type: bool not_advertise: description: Don't advertise this range. type: bool parameters: description: OSPFv3 specific parameters. type: dict suboptions: router_id: description: Override the default router identifier. type: str redistribute: description: Redistribute information from another routing protocol. type: list elements: dict suboptions: route_type: description: Route type to redistribute. type: str choices: - bgp - connected - kernel - ripng - static route_map: description: Route map references. type: str running_config: description: - This option is used only with state I(parsed). - The value of this option should be the output received from the VyOS device by executing the command B(show configuration commands | grep ospfv3). - The state I(parsed) reads the configuration from C(running_config) option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the I(parsed) key within the result. type: str state: description: - The state the configuration should be left in. type: str choices: - merged - replaced - deleted - parsed - gathered - rendered default: merged """ EXAMPLES = """ # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospfv3 # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db20::/32' - address: '2001:db30::/32' - area_id: 3 range: - address: '2001:db40::/32' state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set protocols ospfv3 redistribute bgp", # "set protocols ospfv3 parameters router-id '192.0.2.10'", # "set protocols ospfv3 area 2 range 2001:db10::/32", # "set protocols ospfv3 area 2 range 2001:db20::/32", # "set protocols ospfv3 area 2 range 2001:db30::/32", # "set protocols ospfv3 area '2'", # "set protocols ospfv3 area 2 export-list export1", # "set protocols ospfv3 area 2 import-list import1", # "set protocols ospfv3 area '3'", # "set protocols ospfv3 area 3 range 2001:db40::/32" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using replaced # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Replace ospfv3 routes attributes configuration. vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db30::/32' - address: '2001:db50::/32' - area_id: 4 range: - address: '2001:db60::/32' state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospfv3 area 2 range 2001:db20::/32", # "delete protocols ospfv3 area 3", # "set protocols ospfv3 area 2 range 2001:db50::/32", # "set protocols ospfv3 area '4'", # "set protocols ospfv3 area 4 range 2001:db60::/32" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db30::/32" # }, # { # "address": "2001:db50::/32" # } # ] # }, # { # "area_id": "4", # "range": [ # { # "address": "2001:db60::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 2 range '2001:db50::/32' # set protocols ospfv3 area 4 range '2001:db60::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_ospfv3: config: redistribute: - route_type: bgp parameters: router_id: 192.0.2.10 areas: - area_id: 2 export_list: export1 import_list: import1 range: - address: '2001:db10::/32' - address: '2001:db20::/32' - address: '2001:db30::/32' - area_id: 3 range: - address: '2001:db40::/32' state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # [ # "set protocols ospfv3 redistribute bgp", # "set protocols ospfv3 parameters router-id '192.0.2.10'", # "set protocols ospfv3 area 2 range 2001:db10::/32", # "set protocols ospfv3 area 2 range 2001:db20::/32", # "set protocols ospfv3 area 2 range 2001:db30::/32", # "set protocols ospfv3 area '2'", # "set protocols ospfv3 area 2 export-list export1", # "set protocols ospfv3 area 2 import-list import1", # "set protocols ospfv3 area '3'", # "set protocols ospfv3 area 3 range 2001:db40::/32" # ] # Using parsed # # - name: Parse the commands from the provided configuration vyos.vyos.vyos_ospfv3: running_config: | set protocols ospfv3 area 2 export-list 'export1' set protocols ospfv3 area 2 import-list 'import1' set protocols ospfv3 area 2 range '2001:db10::/32' set protocols ospfv3 area 2 range '2001:db20::/32' set protocols ospfv3 area 2 range '2001:db30::/32' set protocols ospfv3 area 3 range '2001:db40::/32' set protocols ospfv3 parameters router-id '192.0.2.10' set protocols ospfv3 redistribute 'bgp' state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Gather ospfv3 routes config with provided configurations vyos.vyos.vyos_ospfv3: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep ospfv3 # set protocols ospfv3 area 2 export-list 'export1' # set protocols ospfv3 area 2 import-list 'import1' # set protocols ospfv3 area 2 range '2001:db10::/32' # set protocols ospfv3 area 2 range '2001:db20::/32' # set protocols ospfv3 area 2 range '2001:db30::/32' # set protocols ospfv3 area 3 range '2001:db40::/32' # set protocols ospfv3 parameters router-id '192.0.2.10' # set protocols ospfv3 redistribute 'bgp' # - name: Delete attributes of ospfv3 routes. vyos.vyos.vyos_ospfv3: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "areas": [ # { # "area_id": "2", # "export_list": "export1", # "import_list": "import1", # "range": [ # { # "address": "2001:db10::/32" # }, # { # "address": "2001:db20::/32" # }, # { # "address": "2001:db30::/32" # } # ] # }, # { # "area_id": "3", # "range": [ # { # "address": "2001:db40::/32" # } # ] # } # ], # "parameters": { # "router_id": "192.0.2.10" # }, # "redistribute": [ # { # "route_type": "bgp" # } # ] # } # "commands": [ # "delete protocols ospfv3" # ] # # "after": {} # After state # ------------ # vyos@192# run show configuration commands | grep ospfv3 """ RETURN = """ before: description: The configuration prior to the model invocation. returned: always type: dict sample: > The configuration returned will always be in the same format of the parameters above. after: description: The resulting configuration model invocation. returned: when changed type: dict sample: > The configuration returned will always be in the same format of the parameters above. commands: description: The set of commands pushed to the remote device. returned: always type: list sample: - "set protocols ospfv3 parameters router-id '192.0.2.10'" - "set protocols ospfv3 redistribute 'bgp'" """ from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.ospfv3.ospfv3 import ( Ospfv3Args, ) from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.ospfv3.ospfv3 import ( Ospfv3, ) def main(): """ Main entry point for module execution :returns: the result form module invocation """ required_if = [ ("state", "merged", ("config",)), ("state", "replaced", ("config",)), ("state", "rendered", ("config",)), ("state", "overridden", ("config",)), ("state", "parsed", ("running_config",)), ] mutually_exclusive = [("config", "running_config")] module = AnsibleModule( argument_spec=Ospfv3Args.argument_spec, required_if=required_if, supports_check_mode=True, mutually_exclusive=mutually_exclusive, ) result = Ospfv3(module).execute_module() module.exit_json(**result) if __name__ == "__main__": main() diff --git a/plugins/modules/vyos_ping.py b/plugins/modules/vyos_ping.py index 98619399..58ca3459 100644 --- a/plugins/modules/vyos_ping.py +++ b/plugins/modules/vyos_ping.py @@ -1,253 +1,253 @@ #!/usr/bin/python # -*- coding: utf-8 -*- # (c) 2017, Ansible by Red Hat, inc # # This file is part of Ansible by Red Hat # # Ansible is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # Ansible is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with Ansible. If not, see . # from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = """ module: vyos_ping short_description: Tests reachability using ping from VyOS network devices description: - Tests reachability using ping from a VyOS device to a remote destination. -- Tested against VyOS 1.1.8 (helium) +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025 - For a general purpose network module, see the M(ansible.netcommon.net_ping) module. - For Windows targets, use the M(ansible.windows.win_ping) module instead. - For targets running Python, use the M(ansible.builtin.ping) module instead. version_added: 1.0.0 author: - Nilashish Chakraborty (@NilashishC) options: dest: description: - The IP Address or hostname (resolvable by the device) of the remote node. required: true type: str count: description: - Number of packets to send to check reachability. type: int default: 5 source: description: - The source interface or IP Address to use while sending the ping packet(s). type: str ttl: description: - The time-to-live value for the ICMP packet(s). type: int size: description: - Determines the size (in bytes) of the ping packet(s). type: int interval: description: - Determines the interval (in seconds) between consecutive pings. type: int state: description: - Determines if the expected result is success or fail. type: str choices: - absent - present default: present notes: -- Tested against VyOS 1.1.8 (helium). +- Tested against VyOS 1.3.8, 1.4.2, the upcoming 1.5, and the rolling release of spring 2025. - For a general purpose network module, see the M(ansible.netcommon.net_ping) module. - For Windows targets, use the M(ansible.windows.win_ping) module instead. - For targets running Python, use the M(ansible.builtin.ping) module instead. - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). extends_documentation_fragment: - vyos.vyos.vyos """ EXAMPLES = """ - name: Test reachability to 10.10.10.10 vyos.vyos.vyos_ping: dest: 10.10.10.10 - name: Test reachability to 10.20.20.20 using source and ttl set vyos.vyos.vyos_ping: dest: 10.20.20.20 source: eth0 ttl: 128 - name: Test reachability to 10.30.30.30 using interval vyos.vyos.vyos_ping: dest: 10.30.30.30 interval: 3 state: absent - name: Test reachability to 10.40.40.40 setting count and source vyos.vyos.vyos_ping: dest: 10.40.40.40 source: eth1 count: 20 size: 512 """ RETURN = """ commands: description: List of commands sent. returned: always type: list sample: ["ping 10.8.38.44 count 10 interface eth0 ttl 128"] packet_loss: description: Percentage of packets lost. returned: always type: str sample: "0%" packets_rx: description: Packets successfully received. returned: always type: int sample: 20 packets_tx: description: Packets successfully transmitted. returned: always type: int sample: 20 rtt: description: The round trip time (RTT) stats. returned: when ping succeeds type: dict sample: {"avg": 2, "max": 8, "min": 1, "mdev": 24} """ import re from ansible.module_utils.basic import AnsibleModule from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import run_commands def main(): """main entry point for module execution""" argument_spec = dict( count=dict(type="int", default=5), dest=dict(type="str", required=True), source=dict(type="str"), ttl=dict(type="int"), size=dict(type="int"), interval=dict(type="int"), state=dict(type="str", choices=["absent", "present"], default="present"), ) module = AnsibleModule(argument_spec=argument_spec) count = module.params["count"] dest = module.params["dest"] source = module.params["source"] size = module.params["size"] ttl = module.params["ttl"] interval = module.params["interval"] warnings = list() results = {} if warnings: results["warnings"] = warnings results["commands"] = [build_ping(dest, count, size, interval, source, ttl)] ping_results = run_commands(module, commands=results["commands"]) ping_results_list = ping_results[0].split("\n") rtt_info, rate_info = None, None for line in ping_results_list: if line.startswith("rtt"): rtt_info = line if line.startswith("%s packets transmitted" % count): rate_info = line if rtt_info: rtt = parse_rtt(rtt_info) for k, v in rtt.items(): if rtt[k] is not None: rtt[k] = int(v) results["rtt"] = rtt pkt_loss, rx, tx = parse_rate(rate_info) results["packet_loss"] = str(pkt_loss) + "%" results["packets_rx"] = int(rx) results["packets_tx"] = int(tx) validate_results(module, pkt_loss, results) module.exit_json(**results) def build_ping(dest, count, size=None, interval=None, source=None, ttl=None): cmd = "ping {0} count {1}".format(dest, str(count)) if source: cmd += " interface {0}".format(source) if ttl: cmd += " ttl {0}".format(str(ttl)) if size: cmd += " size {0}".format(str(size)) if interval: cmd += " interval {0}".format(str(interval)) return cmd def parse_rate(rate_info): rate_re = re.compile( r"(?P\d+) (?:\w+) (?:\w+), (?P\d+) (?:\w+), (?P\d+)% (?:\w+) (?:\w+), (?:\w+) (?P