Page MenuHomeVyOS Platform
Files F119064242

No OneTemporary
Actions

Size
112 KB
Referenced Files
None
Subscribers
None

View Options

diff --git a/data/templates/ipsec/swanctl/peer.j2 b/data/templates/ipsec/swanctl/peer.j2
index c5841fb91..58f0199fa 100644
--- a/data/templates/ipsec/swanctl/peer.j2
+++ b/data/templates/ipsec/swanctl/peer.j2
@@ -1,160 +1,166 @@
{% macro conn(peer, peer_conf, ike_group, esp_group) %}
{% set name = peer.replace("@", "") | dot_colon_to_dash %}
{# peer needs to reference the global IKE configuration for certain values #}
{% set ike = ike_group[peer_conf.ike_group] %}
{{ name }} {
proposals = {{ ike | get_esp_ike_cipher | join(',') }}
version = {{ ike.key_exchange[4:] if ike.key_exchange is vyos_defined else "0" }}
{% if peer_conf.virtual_address is vyos_defined %}
vips = {{ peer_conf.virtual_address | join(', ') }}
{% endif %}
local_addrs = {{ peer_conf.local_address if peer_conf.local_address != 'any' else '%any' }} # dhcp:{{ peer_conf.dhcp_interface if 'dhcp_interface' in peer_conf else 'no' }}
remote_addrs = {{ peer_conf.remote_address | join(",") if peer_conf.remote_address is vyos_defined and 'any' not in peer_conf.remote_address else '%any' }}
{% if peer_conf.authentication.mode is vyos_defined('x509') %}
send_cert = always
{% endif %}
{% if ike.dead_peer_detection is vyos_defined %}
dpd_timeout = {{ ike.dead_peer_detection.timeout }}
dpd_delay = {{ ike.dead_peer_detection.interval }}
{% endif %}
{% if ike.key_exchange is vyos_defined('ikev1') and ike.mode is vyos_defined('aggressive') %}
aggressive = yes
{% endif %}
rekey_time = {{ ike.lifetime }}s
mobike = {{ "no" if ike.disable_mobike is defined else "yes" }}
{% if peer[0:1] == '@' %}
keyingtries = 0
reauth_time = 0
{% elif peer_conf.connection_type is not vyos_defined or peer_conf.connection_type is vyos_defined('initiate') %}
keyingtries = 0
{% elif peer_conf.connection_type is vyos_defined('respond') %}
keyingtries = 1
{% endif %}
{% if peer_conf.force_udp_encapsulation is vyos_defined %}
encap = yes
{% endif %}
local {
{% if peer_conf.authentication.local_id is vyos_defined %}
id = "{{ peer_conf.authentication.local_id }}"
{% endif %}
auth = {{ 'psk' if peer_conf.authentication.mode == 'pre-shared-secret' else 'pubkey' }}
{% if peer_conf.authentication.mode == 'x509' %}
certs = {{ peer_conf.authentication.x509.certificate }}.pem
{% elif peer_conf.authentication.mode == 'rsa' %}
pubkeys = {{ peer_conf.authentication.rsa.local_key }}.pem
{% endif %}
}
remote {
id = "{{ peer_conf.authentication.remote_id }}"
auth = {{ 'psk' if peer_conf.authentication.mode == 'pre-shared-secret' else 'pubkey' }}
{% if peer_conf.authentication.mode == 'rsa' %}
pubkeys = {{ peer_conf.authentication.rsa.remote_key }}.pem
{% endif %}
}
children {
{% if peer_conf.vti.bind is vyos_defined and peer_conf.tunnel is not vyos_defined %}
{% set vti_esp = esp_group[ peer_conf.vti.esp_group ] if peer_conf.vti.esp_group is vyos_defined else esp_group[ peer_conf.default_esp_group ] %}
{{ name }}-vti {
esp_proposals = {{ vti_esp | get_esp_ike_cipher(ike) | join(',') }}
{% if vti_esp.life_bytes is vyos_defined %}
life_bytes = {{ vti_esp.life_bytes }}
{% endif %}
{% if vti_esp.life_packets is vyos_defined %}
life_packets = {{ vti_esp.life_packets }}
{% endif %}
life_time = {{ vti_esp.lifetime }}s
local_ts = 0.0.0.0/0,::/0
remote_ts = 0.0.0.0/0,::/0
updown = "/etc/ipsec.d/vti-up-down {{ peer_conf.vti.bind }}"
{# The key defaults to 0 and will match any policies which similarly do not have a lookup key configuration. #}
{# Thus we simply shift the key by one to also support a vti0 interface #}
{% set if_id = peer_conf.vti.bind | replace('vti', '') | int + 1 %}
if_id_in = {{ if_id }}
if_id_out = {{ if_id }}
ipcomp = {{ 'yes' if vti_esp.compression is vyos_defined else 'no' }}
mode = {{ vti_esp.mode }}
{% if peer[0:1] == '@' %}
start_action = none
{% elif peer_conf.connection_type is not vyos_defined or peer_conf.connection_type is vyos_defined('initiate') %}
start_action = start
{% elif peer_conf.connection_type is vyos_defined('respond') %}
start_action = trap
{% elif peer_conf.connection_type is vyos_defined('none') %}
start_action = none
{% endif %}
{% if ike.dead_peer_detection is vyos_defined %}
dpd_action = {{ ike.dead_peer_detection.action }}
{% endif %}
close_action = {{ ike.close_action }}
+{% if peer_conf.replay_window is vyos_defined %}
+ replay_window = {{ peer_conf.replay_window }}
+{% endif %}
}
{% elif peer_conf.tunnel is vyos_defined %}
{% for tunnel_id, tunnel_conf in peer_conf.tunnel.items() if tunnel_conf.disable is not defined %}
{% set tunnel_esp_name = tunnel_conf.esp_group if tunnel_conf.esp_group is vyos_defined else peer_conf.default_esp_group %}
{% set tunnel_esp = esp_group[tunnel_esp_name] %}
{% set proto = tunnel_conf.protocol if tunnel_conf.protocol is vyos_defined else '' %}
{% set local_port = tunnel_conf.local.port if tunnel_conf.local.port is vyos_defined else '' %}
{% set local_suffix = '[{0}/{1}]'.format(proto, local_port) if proto or local_port else '' %}
{% set remote_port = tunnel_conf.remote.port if tunnel_conf.remote.port is vyos_defined else '' %}
{% set remote_suffix = '[{0}/{1}]'.format(proto, remote_port) if proto or remote_port else '' %}
{{ name }}-tunnel-{{ tunnel_id }} {
esp_proposals = {{ tunnel_esp | get_esp_ike_cipher(ike) | join(',') }}
{% if tunnel_esp.life_bytes is vyos_defined %}
life_bytes = {{ tunnel_esp.life_bytes }}
{% endif %}
{% if tunnel_esp.life_packets is vyos_defined %}
life_packets = {{ tunnel_esp.life_packets }}
{% endif %}
life_time = {{ tunnel_esp.lifetime }}s
{% if tunnel_esp.mode is not defined or tunnel_esp.mode == 'tunnel' %}
{% if tunnel_conf.local.prefix is vyos_defined %}
{% set local_prefix = tunnel_conf.local.prefix if 'any' not in tunnel_conf.local.prefix else ['0.0.0.0/0', '::/0'] %}
local_ts = {{ local_prefix | join(local_suffix + ",") }}{{ local_suffix }}
{% endif %}
{% if tunnel_conf.remote.prefix is vyos_defined %}
{% set remote_prefix = tunnel_conf.remote.prefix if 'any' not in tunnel_conf.remote.prefix else ['0.0.0.0/0', '::/0'] %}
remote_ts = {{ remote_prefix | join(remote_suffix + ",") }}{{ remote_suffix }}
{% endif %}
{% if tunnel_conf.priority is vyos_defined %}
priority = {{ tunnel_conf.priority }}
{% endif %}
{% elif tunnel_esp.mode == 'transport' %}
local_ts = {{ peer_conf.local_address }}{{ local_suffix }}
remote_ts = {{ peer_conf.remote_address | join(",") }}{{ remote_suffix }}
{% endif %}
ipcomp = {{ 'yes' if tunnel_esp.compression is vyos_defined else 'no' }}
mode = {{ tunnel_esp.mode }}
{% if peer[0:1] == '@' %}
start_action = none
{% elif peer_conf.connection_type is not vyos_defined or peer_conf.connection_type is vyos_defined('initiate') %}
start_action = start
{% elif peer_conf.connection_type is vyos_defined('respond') %}
start_action = trap
{% elif peer_conf.connection_type is vyos_defined('none') %}
start_action = none
{% endif %}
{% if ike.dead_peer_detection is vyos_defined %}
dpd_action = {{ ike.dead_peer_detection.action }}
{% endif %}
close_action = {{ ike.close_action }}
+{% if peer_conf.replay_window is vyos_defined %}
+ replay_window = {{ peer_conf.replay_window }}
+{% endif %}
{% if peer_conf.vti.bind is vyos_defined %}
{# The key defaults to 0 and will match any policies which similarly do not have a lookup key configuration. #}
{# Thus we simply shift the key by one to also support a vti0 interface #}
{% set if_id = peer_conf.vti.bind | replace('vti', '') | int + 1 %}
updown = "/etc/ipsec.d/vti-up-down {{ peer_conf.vti.bind }}"
if_id_in = {{ if_id }}
if_id_out = {{ if_id }}
{% endif %}
}
{% if tunnel_conf.passthrough is vyos_defined %}
{{ name }}-tunnel-{{ tunnel_id }}-passthrough {
local_ts = {{ tunnel_conf.passthrough | join(",") }}
remote_ts = {{ tunnel_conf.passthrough | join(",") }}
start_action = trap
mode = pass
}
{% endif %}
{% endfor %}
{% endif %}
}
}
{% endmacro %}
diff --git a/data/templates/ipsec/swanctl/remote_access.j2 b/data/templates/ipsec/swanctl/remote_access.j2
index 01dc8a4a7..bce8684fe 100644
--- a/data/templates/ipsec/swanctl/remote_access.j2
+++ b/data/templates/ipsec/swanctl/remote_access.j2
@@ -1,53 +1,56 @@
{% macro conn(name, rw_conf, ike_group, esp_group) %}
{# peer needs to reference the global IKE configuration for certain values #}
{% set ike = ike_group[rw_conf.ike_group] %}
{% set esp = esp_group[rw_conf.esp_group] %}
ra-{{ name }} {
remote_addrs = %any
local_addrs = {{ rw_conf.local_address if rw_conf.local_address is vyos_defined else '%any' }}
proposals = {{ ike_group[rw_conf.ike_group] | get_esp_ike_cipher | join(',') }}
version = {{ ike.key_exchange[4:] if ike.key_exchange is vyos_defined else "0" }}
send_certreq = no
rekey_time = {{ ike.lifetime }}s
keyingtries = 0
{% if rw_conf.unique is vyos_defined %}
unique = {{ rw_conf.unique }}
{% endif %}
{% if rw_conf.pool is vyos_defined %}
pools = {{ rw_conf.pool | join(',') }}
{% endif %}
local {
{% if rw_conf.authentication.local_id is vyos_defined and rw_conf.authentication.use_x509_id is not vyos_defined %}
{# please use " quotes - else Apple iOS goes crazy #}
id = "{{ rw_conf.authentication.local_id }}"
{% endif %}
{% if rw_conf.authentication.server_mode == 'x509' %}
auth = pubkey
certs = {{ rw_conf.authentication.x509.certificate }}.pem
{% elif rw_conf.authentication.server_mode == 'pre-shared-secret' %}
auth = psk
{% endif %}
}
remote {
{% if rw_conf.authentication.client_mode == 'x509' %}
auth = pubkey
{% elif rw_conf.authentication.client_mode.startswith("eap") %}
auth = {{ rw_conf.authentication.client_mode }}
eap_id = %any
{% endif %}
}
children {
ikev2-vpn {
esp_proposals = {{ esp | get_esp_ike_cipher(ike) | join(',') }}
rekey_time = {{ esp.lifetime }}s
rand_time = 540s
dpd_action = clear
inactivity = {{ rw_conf.timeout }}
+{% if rw_conf.replay_window is vyos_defined %}
+ replay_window = {{ rw_conf.replay_window }}
+{% endif %}
{% set local_prefix = rw_conf.local.prefix if rw_conf.local.prefix is vyos_defined else ['0.0.0.0/0', '::/0'] %}
{% set local_port = rw_conf.local.port if rw_conf.local.port is vyos_defined else '' %}
{% set local_suffix = '[%any/{1}]'.format(local_port) if local_port else '' %}
local_ts = {{ local_prefix | join(local_suffix + ",") }}{{ local_suffix }}
}
}
}
{% endmacro %}
diff --git a/interface-definitions/include/ipsec/replay-window.xml.i b/interface-definitions/include/ipsec/replay-window.xml.i
new file mode 100644
index 000000000..f35ed550a
--- /dev/null
+++ b/interface-definitions/include/ipsec/replay-window.xml.i
@@ -0,0 +1,19 @@
+<!-- include start from ipsec/replay-window.xml.i -->
+<leafNode name="replay-window">
+ <properties>
+ <help>IPsec replay window to configure for this CHILD_SA</help>
+ <valueHelp>
+ <format>u32:0</format>
+ <description>Disable IPsec replay protection</description>
+ </valueHelp>
+ <valueHelp>
+ <format>u32:1-2040</format>
+ <description>Replay window size in packets</description>
+ </valueHelp>
+ <constraint>
+ <validator name="numeric" argument="--range 0-2040"/>
+ </constraint>
+ </properties>
+ <defaultValue>32</defaultValue>
+ </leafNode>
+ <!-- include end -->
diff --git a/interface-definitions/vpn_ipsec.xml.in b/interface-definitions/vpn_ipsec.xml.in
index 9d1d5d824..44ca1c7a0 100644
--- a/interface-definitions/vpn_ipsec.xml.in
+++ b/interface-definitions/vpn_ipsec.xml.in
@@ -1,1194 +1,1196 @@
<?xml version="1.0"?>
<interfaceDefinition>
<node name="vpn">
<properties>
<help>Virtual Private Network (VPN)</help>
</properties>
<children>
<node name="ipsec" owner="${vyos_conf_scripts_dir}/vpn_ipsec.py">
<properties>
<help>VPN IP security (IPsec) parameters</help>
<priority>901</priority>
</properties>
<children>
<node name="authentication">
<properties>
<help>Authentication</help>
</properties>
<children>
<tagNode name="psk">
<properties>
<help>Pre-shared key name</help>
</properties>
<children>
#include <include/dhcp-interface-multi.xml.i>
<leafNode name="id">
<properties>
<help>ID for authentication</help>
<valueHelp>
<format>txt</format>
<description>ID used for authentication</description>
</valueHelp>
<multi/>
</properties>
</leafNode>
<leafNode name="secret">
<properties>
<help>IKE pre-shared secret key</help>
<valueHelp>
<format>txt</format>
<description>IKE pre-shared secret key</description>
</valueHelp>
</properties>
</leafNode>
</children>
</tagNode>
</children>
</node>
<leafNode name="disable-uniqreqids">
<properties>
<help>Disable requirement for unique IDs in the Security Database</help>
<valueless/>
</properties>
</leafNode>
<tagNode name="esp-group">
<properties>
<help>Encapsulating Security Payload (ESP) group name</help>
</properties>
<children>
<leafNode name="compression">
<properties>
<help>Enable ESP compression</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="lifetime">
<properties>
<help>Security Association time to expire</help>
<valueHelp>
<format>u32:30-86400</format>
<description>SA lifetime in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 30-86400"/>
</constraint>
</properties>
<defaultValue>3600</defaultValue>
</leafNode>
<leafNode name="life-bytes">
<properties>
<help>Security Association byte count to expire</help>
<valueHelp>
<format>u32:1024-26843545600000</format>
<description>SA life in bytes</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1024-26843545600000"/>
</constraint>
</properties>
</leafNode>
<leafNode name="life-packets">
<properties>
<help>Security Association packet count to expire</help>
<valueHelp>
<format>u32:1000-26843545600000</format>
<description>SA life in packets</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1000-26843545600000"/>
</constraint>
</properties>
</leafNode>
<leafNode name="mode">
<properties>
<help>ESP mode</help>
<completionHelp>
<list>tunnel transport</list>
</completionHelp>
<valueHelp>
<format>tunnel</format>
<description>Tunnel mode</description>
</valueHelp>
<valueHelp>
<format>transport</format>
<description>Transport mode</description>
</valueHelp>
<constraint>
<regex>(tunnel|transport)</regex>
</constraint>
</properties>
<defaultValue>tunnel</defaultValue>
</leafNode>
<leafNode name="pfs">
<properties>
<help>ESP Perfect Forward Secrecy</help>
<completionHelp>
<list>enable dh-group1 dh-group2 dh-group5 dh-group14 dh-group15 dh-group16 dh-group17 dh-group18 dh-group19 dh-group20 dh-group21 dh-group22 dh-group23 dh-group24 dh-group25 dh-group26 dh-group27 dh-group28 dh-group29 dh-group30 dh-group31 dh-group32 disable</list>
</completionHelp>
<valueHelp>
<format>enable</format>
<description>Inherit Diffie-Hellman group from the IKE group</description>
</valueHelp>
<valueHelp>
<format>dh-group1</format>
<description>Use Diffie-Hellman group 1 (modp768)</description>
</valueHelp>
<valueHelp>
<format>dh-group2</format>
<description>Use Diffie-Hellman group 2 (modp1024)</description>
</valueHelp>
<valueHelp>
<format>dh-group5</format>
<description>Use Diffie-Hellman group 5 (modp1536)</description>
</valueHelp>
<valueHelp>
<format>dh-group14</format>
<description>Use Diffie-Hellman group 14 (modp2048)</description>
</valueHelp>
<valueHelp>
<format>dh-group15</format>
<description>Use Diffie-Hellman group 15 (modp3072)</description>
</valueHelp>
<valueHelp>
<format>dh-group16</format>
<description>Use Diffie-Hellman group 16 (modp4096)</description>
</valueHelp>
<valueHelp>
<format>dh-group17</format>
<description>Use Diffie-Hellman group 17 (modp6144)</description>
</valueHelp>
<valueHelp>
<format>dh-group18</format>
<description>Use Diffie-Hellman group 18 (modp8192)</description>
</valueHelp>
<valueHelp>
<format>dh-group19</format>
<description>Use Diffie-Hellman group 19 (ecp256)</description>
</valueHelp>
<valueHelp>
<format>dh-group20</format>
<description>Use Diffie-Hellman group 20 (ecp384)</description>
</valueHelp>
<valueHelp>
<format>dh-group21</format>
<description>Use Diffie-Hellman group 21 (ecp521)</description>
</valueHelp>
<valueHelp>
<format>dh-group22</format>
<description>Use Diffie-Hellman group 22 (modp1024s160)</description>
</valueHelp>
<valueHelp>
<format>dh-group23</format>
<description>Use Diffie-Hellman group 23 (modp2048s224)</description>
</valueHelp>
<valueHelp>
<format>dh-group24</format>
<description>Use Diffie-Hellman group 24 (modp2048s256)</description>
</valueHelp>
<valueHelp>
<format>dh-group25</format>
<description>Use Diffie-Hellman group 25 (ecp192)</description>
</valueHelp>
<valueHelp>
<format>dh-group26</format>
<description>Use Diffie-Hellman group 26 (ecp224)</description>
</valueHelp>
<valueHelp>
<format>dh-group27</format>
<description>Use Diffie-Hellman group 27 (ecp224bp)</description>
</valueHelp>
<valueHelp>
<format>dh-group28</format>
<description>Use Diffie-Hellman group 28 (ecp256bp)</description>
</valueHelp>
<valueHelp>
<format>dh-group29</format>
<description>Use Diffie-Hellman group 29 (ecp384bp)</description>
</valueHelp>
<valueHelp>
<format>dh-group30</format>
<description>Use Diffie-Hellman group 30 (ecp512bp)</description>
</valueHelp>
<valueHelp>
<format>dh-group31</format>
<description>Use Diffie-Hellman group 31 (curve25519)</description>
</valueHelp>
<valueHelp>
<format>dh-group32</format>
<description>Use Diffie-Hellman group 32 (curve448)</description>
</valueHelp>
<valueHelp>
<format>disable</format>
<description>Disable PFS</description>
</valueHelp>
<constraint>
<regex>(enable|dh-group1|dh-group2|dh-group5|dh-group14|dh-group15|dh-group16|dh-group17|dh-group18|dh-group19|dh-group20|dh-group21|dh-group22|dh-group23|dh-group24|dh-group25|dh-group26|dh-group27|dh-group28|dh-group29|dh-group30|dh-group31|dh-group32|disable)</regex>
</constraint>
</properties>
<defaultValue>enable</defaultValue>
</leafNode>
<tagNode name="proposal">
<properties>
<help>ESP group proposal</help>
<valueHelp>
<format>u32:1-65535</format>
<description>ESP group proposal number</description>
</valueHelp>
</properties>
<children>
#include <include/vpn-ipsec-encryption.xml.i>
#include <include/vpn-ipsec-hash.xml.i>
</children>
</tagNode>
</children>
</tagNode>
<tagNode name="ike-group">
<properties>
<help>Internet Key Exchange (IKE) group name</help>
</properties>
<children>
<leafNode name="close-action">
<properties>
<help>Action to take if a child SA is unexpectedly closed</help>
<completionHelp>
<list>none trap start</list>
</completionHelp>
<valueHelp>
<format>none</format>
<description>Do nothing</description>
</valueHelp>
<valueHelp>
<format>trap</format>
<description>Attempt to re-negotiate when matching traffic is seen</description>
</valueHelp>
<valueHelp>
<format>start</format>
<description>Attempt to re-negotiate the connection immediately</description>
</valueHelp>
<constraint>
<regex>(none|trap|start)</regex>
</constraint>
</properties>
<defaultValue>none</defaultValue>
</leafNode>
<node name="dead-peer-detection">
<properties>
<help>Dead Peer Detection (DPD)</help>
</properties>
<children>
<leafNode name="action">
<properties>
<help>Keep-alive failure action</help>
<completionHelp>
<list>trap clear restart</list>
</completionHelp>
<valueHelp>
<format>trap</format>
<description>Attempt to re-negotiate the connection when matching traffic is seen</description>
</valueHelp>
<valueHelp>
<format>clear</format>
<description>Remove the connection immediately</description>
</valueHelp>
<valueHelp>
<format>restart</format>
<description>Attempt to re-negotiate the connection immediately</description>
</valueHelp>
<constraint>
<regex>(trap|clear|restart)</regex>
</constraint>
</properties>
<defaultValue>clear</defaultValue>
</leafNode>
<leafNode name="interval">
<properties>
<help>Keep-alive interval</help>
<valueHelp>
<format>u32:2-86400</format>
<description>Keep-alive interval in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 2-86400"/>
</constraint>
</properties>
<defaultValue>30</defaultValue>
</leafNode>
<leafNode name="timeout">
<properties>
<help>Dead Peer Detection keep-alive timeout (IKEv1 only)</help>
<valueHelp>
<format>u32:2-86400</format>
<description>Keep-alive timeout in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 2-86400"/>
</constraint>
</properties>
<defaultValue>120</defaultValue>
</leafNode>
</children>
</node>
<leafNode name="ikev2-reauth">
<properties>
<help>Re-authentication of the remote peer during an IKE re-key (IKEv2 only)</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="key-exchange">
<properties>
<help>IKE version</help>
<completionHelp>
<list>ikev1 ikev2</list>
</completionHelp>
<valueHelp>
<format>ikev1</format>
<description>Use IKEv1 for key exchange</description>
</valueHelp>
<valueHelp>
<format>ikev2</format>
<description>Use IKEv2 for key exchange</description>
</valueHelp>
<constraint>
<regex>(ikev1|ikev2)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="lifetime">
<properties>
<help>IKE lifetime</help>
<valueHelp>
<format>u32:0-86400</format>
<description>IKE lifetime in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-86400"/>
</constraint>
</properties>
<defaultValue>28800</defaultValue>
</leafNode>
<leafNode name="disable-mobike">
<properties>
<help>Disable MOBIKE Support (IKEv2 only)</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="mode">
<properties>
<help>IKEv1 phase 1 mode</help>
<completionHelp>
<list>main aggressive</list>
</completionHelp>
<valueHelp>
<format>main</format>
<description>Use the main mode (recommended)</description>
</valueHelp>
<valueHelp>
<format>aggressive</format>
<description>Use the aggressive mode (insecure, not recommended)</description>
</valueHelp>
<constraint>
<regex>(main|aggressive)</regex>
</constraint>
</properties>
<defaultValue>main</defaultValue>
</leafNode>
<tagNode name="proposal">
<properties>
<help>IKE proposal</help>
<valueHelp>
<format>u32:1-65535</format>
<description>IKE group proposal</description>
</valueHelp>
</properties>
<children>
<leafNode name="dh-group">
<properties>
<help>dh-grouphelp</help>
<completionHelp>
<list>1 2 5 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32</list>
</completionHelp>
<valueHelp>
<format>1</format>
<description>Diffie-Hellman group 1 (modp768)</description>
</valueHelp>
<valueHelp>
<format>2</format>
<description>Diffie-Hellman group 2 (modp1024)</description>
</valueHelp>
<valueHelp>
<format>5</format>
<description>Diffie-Hellman group 5 (modp1536)</description>
</valueHelp>
<valueHelp>
<format>14</format>
<description>Diffie-Hellman group 14 (modp2048)</description>
</valueHelp>
<valueHelp>
<format>15</format>
<description>Diffie-Hellman group 15 (modp3072)</description>
</valueHelp>
<valueHelp>
<format>16</format>
<description>Diffie-Hellman group 16 (modp4096)</description>
</valueHelp>
<valueHelp>
<format>17</format>
<description>Diffie-Hellman group 17 (modp6144)</description>
</valueHelp>
<valueHelp>
<format>18</format>
<description>Diffie-Hellman group 18 (modp8192)</description>
</valueHelp>
<valueHelp>
<format>19</format>
<description>Diffie-Hellman group 19 (ecp256)</description>
</valueHelp>
<valueHelp>
<format>20</format>
<description>Diffie-Hellman group 20 (ecp384)</description>
</valueHelp>
<valueHelp>
<format>21</format>
<description>Diffie-Hellman group 21 (ecp521)</description>
</valueHelp>
<valueHelp>
<format>22</format>
<description>Diffie-Hellman group 22 (modp1024s160)</description>
</valueHelp>
<valueHelp>
<format>23</format>
<description>Diffie-Hellman group 23 (modp2048s224)</description>
</valueHelp>
<valueHelp>
<format>24</format>
<description>Diffie-Hellman group 24 (modp2048s256)</description>
</valueHelp>
<valueHelp>
<format>25</format>
<description>Diffie-Hellman group 25 (ecp192)</description>
</valueHelp>
<valueHelp>
<format>26</format>
<description>Diffie-Hellman group 26 (ecp224)</description>
</valueHelp>
<valueHelp>
<format>27</format>
<description>Diffie-Hellman group 27 (ecp224bp)</description>
</valueHelp>
<valueHelp>
<format>28</format>
<description>Diffie-Hellman group 28 (ecp256bp)</description>
</valueHelp>
<valueHelp>
<format>29</format>
<description>Diffie-Hellman group 29 (ecp384bp)</description>
</valueHelp>
<valueHelp>
<format>30</format>
<description>Diffie-Hellman group 30 (ecp512bp)</description>
</valueHelp>
<valueHelp>
<format>31</format>
<description>Diffie-Hellman group 31 (curve25519)</description>
</valueHelp>
<valueHelp>
<format>32</format>
<description>Diffie-Hellman group 32 (curve448)</description>
</valueHelp>
<constraint>
<regex>(1|2|5|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|32)</regex>
</constraint>
</properties>
<defaultValue>2</defaultValue>
</leafNode>
<leafNode name="prf">
<properties>
<help>Pseudo-Random Functions</help>
<completionHelp>
<list>prfmd5 prfsha1 prfaesxcbc prfaescmac prfsha256 prfsha384 prfsha512</list>
</completionHelp>
<valueHelp>
<format>prfmd5</format>
<description>MD5 PRF</description>
</valueHelp>
<valueHelp>
<format>prfsha1</format>
<description>SHA1 PRF</description>
</valueHelp>
<valueHelp>
<format>prfaesxcbc</format>
<description>AES XCBC PRF</description>
</valueHelp>
<valueHelp>
<format>prfaescmac</format>
<description>AES CMAC PRF</description>
</valueHelp>
<valueHelp>
<format>prfsha256</format>
<description>SHA2_256 PRF</description>
</valueHelp>
<valueHelp>
<format>prfsha384</format>
<description>SHA2_384 PRF</description>
</valueHelp>
<valueHelp>
<format>prfsha512</format>
<description>SHA2_512 PRF</description>
</valueHelp>
<constraint>
<regex>(prfmd5|prfsha1|prfaesxcbc|prfaescmac|prfsha256|prfsha384|prfsha512)</regex>
</constraint>
</properties>
</leafNode>
#include <include/vpn-ipsec-encryption.xml.i>
#include <include/vpn-ipsec-hash.xml.i>
</children>
</tagNode>
</children>
</tagNode>
#include <include/generic-interface-multi.xml.i>
<node name="log">
<properties>
<help>IPsec logging</help>
</properties>
<children>
<leafNode name="level">
<properties>
<help>Global IPsec logging Level</help>
<valueHelp>
<format>0</format>
<description>Very basic auditing logs (e.g., SA up/SA down)</description>
</valueHelp>
<valueHelp>
<format>1</format>
<description>Generic control flow with errors, a good default to see whats going on</description>
</valueHelp>
<valueHelp>
<format>2</format>
<description>More detailed debugging control flow</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-2"/>
</constraint>
</properties>
<defaultValue>0</defaultValue>
</leafNode>
<leafNode name="subsystem">
<properties>
<help>Subsystem logging levels</help>
<completionHelp>
<list>dmn mgr ike chd job cfg knl net asn enc lib esp tls tnc imc imv pts any</list>
</completionHelp>
<valueHelp>
<format>dmn</format>
<description>Main daemon setup/cleanup/signal handling</description>
</valueHelp>
<valueHelp>
<format>mgr</format>
<description>IKE_SA manager, handling synchronization for IKE_SA access</description>
</valueHelp>
<valueHelp>
<format>ike</format>
<description>IKE_SA/ISAKMP SA</description>
</valueHelp>
<valueHelp>
<format>chd</format>
<description>CHILD_SA/IPsec SA</description>
</valueHelp>
<valueHelp>
<format>job</format>
<description>Jobs queuing/processing and thread pool management</description>
</valueHelp>
<valueHelp>
<format>cfg</format>
<description>Configuration management and plugins</description>
</valueHelp>
<valueHelp>
<format>knl</format>
<description>IPsec/Networking kernel interface</description>
</valueHelp>
<valueHelp>
<format>net</format>
<description>IKE network communication</description>
</valueHelp>
<valueHelp>
<format>asn</format>
<description>Low-level encoding/decoding (ASN.1, X.509 etc.)</description>
</valueHelp>
<valueHelp>
<format>enc</format>
<description>Packet encoding/decoding encryption/decryption operations</description>
</valueHelp>
<valueHelp>
<format>lib</format>
<description>libstrongswan library messages</description>
</valueHelp>
<valueHelp>
<format>esp</format>
<description>libipsec library messages</description>
</valueHelp>
<valueHelp>
<format>tls</format>
<description> libtls library messages</description>
</valueHelp>
<valueHelp>
<format>tnc</format>
<description>Trusted Network Connect</description>
</valueHelp>
<valueHelp>
<format>imc</format>
<description>Integrity Measurement Collector</description>
</valueHelp>
<valueHelp>
<format>imv</format>
<description>Integrity Measurement Verifier</description>
</valueHelp>
<valueHelp>
<format>pts</format>
<description> Platform Trust Service</description>
</valueHelp>
<valueHelp>
<format>any</format>
<description>Any subsystem</description>
</valueHelp>
<constraint>
<regex>(dmn|mgr|ike|chd|job|cfg|knl|net|asn|enc|lib|esp|tls|tnc|imc|imv|pts|any)</regex>
</constraint>
<multi/>
</properties>
</leafNode>
</children>
</node>
<node name="options">
<properties>
<help>Global IPsec settings</help>
</properties>
<children>
<leafNode name="disable-route-autoinstall">
<properties>
<help>Do not automatically install routes to remote networks</help>
<valueless/>
</properties>
</leafNode>
<leafNode name="flexvpn">
<properties>
<help>Allow FlexVPN vendor ID payload (IKEv2 only)</help>
<valueless/>
</properties>
</leafNode>
#include <include/generic-interface.xml.i>
<leafNode name="virtual-ip">
<properties>
<help>Allow install virtual-ip addresses</help>
<valueless/>
</properties>
</leafNode>
</children>
</node>
<tagNode name="profile">
<properties>
<help>VPN IPsec profile</help>
<valueHelp>
<format>txt</format>
<description>Profile name</description>
</valueHelp>
<constraint>
<regex>[a-zA-Z][0-9a-zA-Z_-]+</regex>
</constraint>
<constraintErrorMessage>Profile name must be alphanumeric and can contain hyphen(s) and underscore(s)</constraintErrorMessage>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<node name="authentication">
<properties>
<help>Authentication</help>
</properties>
<children>
<leafNode name="mode">
<properties>
<help>Authentication mode</help>
<completionHelp>
<list>pre-shared-secret</list>
</completionHelp>
<valueHelp>
<format>pre-shared-secret</format>
<description>Use a pre-shared secret key</description>
</valueHelp>
</properties>
</leafNode>
#include <include/ipsec/authentication-pre-shared-secret.xml.i>
</children>
</node>
<node name="bind">
<properties>
<help>DMVPN tunnel configuration</help>
</properties>
<children>
<leafNode name="tunnel">
<properties>
<help>Tunnel interface associated with this profile</help>
<completionHelp>
<path>interfaces tunnel</path>
</completionHelp>
<valueHelp>
<format>txt</format>
<description>Associated interface to this profile</description>
</valueHelp>
<multi/>
</properties>
</leafNode>
</children>
</node>
#include <include/ipsec/esp-group.xml.i>
#include <include/ipsec/ike-group.xml.i>
</children>
</tagNode>
<node name="remote-access">
<properties>
<help>IKEv2 remote access VPN</help>
</properties>
<children>
<tagNode name="connection">
<properties>
<help>IKEv2 VPN connection name</help>
<valueHelp>
<format>txt</format>
<description>Connection name</description>
</valueHelp>
<constraint>
<regex>[a-zA-Z][0-9a-zA-Z_-]+</regex>
</constraint>
<constraintErrorMessage>Profile name must be alphanumeric and can contain hyphen(s) and underscore(s)</constraintErrorMessage>
</properties>
<children>
<node name="authentication">
<properties>
<help>Authentication for remote access</help>
</properties>
<children>
#include <include/ipsec/authentication-id.xml.i>
#include <include/ipsec/authentication-x509.xml.i>
<leafNode name="client-mode">
<properties>
<help>Client authentication mode</help>
<completionHelp>
<list>x509 eap-tls eap-mschapv2 eap-radius</list>
</completionHelp>
<valueHelp>
<format>x509</format>
<description>Use IPsec x.509 certificate authentication</description>
</valueHelp>
<valueHelp>
<format>eap-tls</format>
<description>Use EAP-TLS authentication</description>
</valueHelp>
<valueHelp>
<format>eap-mschapv2</format>
<description>Use EAP-MSCHAPv2 authentication</description>
</valueHelp>
<valueHelp>
<format>eap-radius</format>
<description>Use EAP-RADIUS authentication</description>
</valueHelp>
<constraint>
<regex>(x509|eap-tls|eap-mschapv2|eap-radius)</regex>
</constraint>
</properties>
<defaultValue>eap-mschapv2</defaultValue>
</leafNode>
#include <include/auth-local-users.xml.i>
<leafNode name="server-mode">
<properties>
<help>Server authentication mode</help>
<completionHelp>
<list>pre-shared-secret x509</list>
</completionHelp>
<valueHelp>
<format>pre-shared-secret</format>
<description>Use a pre-shared secret key</description>
</valueHelp>
<valueHelp>
<format>x509</format>
<description>Use x.509 certificate</description>
</valueHelp>
<constraint>
<regex>(pre-shared-secret|x509)</regex>
</constraint>
</properties>
<defaultValue>x509</defaultValue>
</leafNode>
#include <include/ipsec/authentication-pre-shared-secret.xml.i>
</children>
</node>
#include <include/generic-description.xml.i>
#include <include/generic-disable-node.xml.i>
#include <include/ipsec/esp-group.xml.i>
#include <include/ipsec/ike-group.xml.i>
#include <include/ipsec/local-address.xml.i>
#include <include/ipsec/local-traffic-selector.xml.i>
+ #include <include/ipsec/replay-window.xml.i>
<leafNode name="timeout">
<properties>
<help>Timeout to close connection if no data is transmitted</help>
<valueHelp>
<format>u32:0</format>
<description>Disable inactivity checks</description>
</valueHelp>
<valueHelp>
<format>u32:1-86400</format>
<description>Timeout in seconds</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-86400"/>
</constraint>
</properties>
<defaultValue>28800</defaultValue>
</leafNode>
<leafNode name="pool">
<properties>
<help>IP address pool</help>
<completionHelp>
<path>vpn ipsec remote-access pool</path>
<list>dhcp radius</list>
</completionHelp>
<valueHelp>
<format>txt</format>
<description>Predefined IP pool name</description>
</valueHelp>
<valueHelp>
<format>dhcp</format>
<description>Forward requests for virtual IP addresses to a DHCP server</description>
</valueHelp>
<valueHelp>
<format>radius</format>
<description>Forward requests for virtual IP addresses to a RADIUS server</description>
</valueHelp>
<multi/>
</properties>
</leafNode>
<leafNode name="unique">
<properties>
<help>Connection uniqueness enforcement policy</help>
<completionHelp>
<list>never keep replace</list>
</completionHelp>
<valueHelp>
<format>never</format>
<description>Never enforce connection uniqueness</description>
</valueHelp>
<valueHelp>
<format>keep</format>
<description>Reject new connection attempts if the same user already has an active connection</description>
</valueHelp>
<valueHelp>
<format>replace</format>
<description>Delete any existing connection if a new one for the same user gets established</description>
</valueHelp>
<constraint>
<regex>(never|keep|replace)</regex>
</constraint>
</properties>
</leafNode>
</children>
</tagNode>
<node name="dhcp">
<properties>
<help>DHCP pool options for remote access</help>
</properties>
<children>
#include <include/generic-interface.xml.i>
<leafNode name="server">
<properties>
<help>DHCP server address</help>
<valueHelp>
<format>ipv4</format>
<description>DHCP server IPv4 address</description>
</valueHelp>
<constraint>
<validator name="ipv4-address"/>
</constraint>
</properties>
</leafNode>
</children>
</node>
<tagNode name="pool">
<properties>
<help>IP address pool for remote access users</help>
</properties>
<children>
<leafNode name="exclude">
<properties>
<help>Local IPv4 or IPv6 pool prefix exclusions</help>
<valueHelp>
<format>ipv4net</format>
<description>Local IPv4 pool prefix exclusion</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>Local IPv6 pool prefix exclusion</description>
</valueHelp>
<constraint>
<validator name="ipv4-prefix"/>
<validator name="ipv6-prefix"/>
</constraint>
<multi/>
</properties>
</leafNode>
<leafNode name="prefix">
<properties>
<help>Local IPv4 or IPv6 pool prefix</help>
<valueHelp>
<format>ipv4net</format>
<description>Local IPv4 pool prefix</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>Local IPv6 pool prefix</description>
</valueHelp>
<constraint>
<validator name="ipv4-prefix"/>
<validator name="ipv6-prefix"/>
</constraint>
</properties>
</leafNode>
#include <include/name-server-ipv4-ipv6.xml.i>
</children>
</tagNode>
#include <include/radius-auth-server-ipv4.xml.i>
<node name="radius">
<children>
#include <include/radius-nas-identifier.xml.i>
#include <include/radius-timeout.xml.i>
<tagNode name="server">
<children>
#include <include/accel-ppp/radius-additions-disable-accounting.xml.i>
</children>
</tagNode>
</children>
</node>
</children>
</node>
<node name="site-to-site">
<properties>
<help>Site-to-site VPN</help>
</properties>
<children>
<tagNode name="peer">
<properties>
<help>Connection name of the peer</help>
<valueHelp>
<format>txt</format>
<description>Connection name of the peer</description>
</valueHelp>
<constraint>
<regex>[-_a-zA-Z0-9|@]+</regex>
</constraint>
<constraintErrorMessage>Peer connection name must be alphanumeric and can contain hyphen and underscores</constraintErrorMessage>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
<node name="authentication">
<properties>
<help>Peer authentication</help>
</properties>
<children>
#include <include/ipsec/authentication-id.xml.i>
#include <include/ipsec/authentication-rsa.xml.i>
#include <include/ipsec/authentication-x509.xml.i>
<leafNode name="mode">
<properties>
<help>Authentication mode</help>
<completionHelp>
<list>pre-shared-secret rsa x509</list>
</completionHelp>
<valueHelp>
<format>pre-shared-secret</format>
<description>Use pre-shared secret key</description>
</valueHelp>
<valueHelp>
<format>rsa</format>
<description>Use RSA key</description>
</valueHelp>
<valueHelp>
<format>x509</format>
<description>Use x.509 certificate</description>
</valueHelp>
<constraint>
<regex>(pre-shared-secret|rsa|x509)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="remote-id">
<properties>
<help>ID for remote authentication</help>
<valueHelp>
<format>txt</format>
<description>ID used for peer authentication</description>
</valueHelp>
</properties>
<defaultValue>%any</defaultValue>
</leafNode>
<leafNode name="use-x509-id">
<properties>
<help>Use certificate common name as ID</help>
<valueless/>
</properties>
</leafNode>
</children>
</node>
<leafNode name="connection-type">
<properties>
<help>Connection type</help>
<completionHelp>
<list>initiate respond none</list>
</completionHelp>
<valueHelp>
<format>initiate</format>
<description>Bring the connection up immediately</description>
</valueHelp>
<valueHelp>
<format>respond</format>
<description>Wait for the peer to initiate the connection</description>
</valueHelp>
<valueHelp>
<format>none</format>
<description>Load the connection only</description>
</valueHelp>
<constraint>
<regex>(initiate|respond|none)</regex>
</constraint>
</properties>
</leafNode>
<leafNode name="default-esp-group">
<properties>
<help>Defult ESP group name</help>
<completionHelp>
<path>vpn ipsec esp-group</path>
</completionHelp>
</properties>
</leafNode>
#include <include/generic-description.xml.i>
#include <include/dhcp-interface.xml.i>
<leafNode name="force-udp-encapsulation">
<properties>
<help>Force UDP encapsulation</help>
<valueless/>
</properties>
</leafNode>
#include <include/ipsec/ike-group.xml.i>
<leafNode name="ikev2-reauth">
<properties>
<help>Re-authentication of the remote peer during an IKE re-key (IKEv2 only)</help>
<completionHelp>
<list>yes no inherit</list>
</completionHelp>
<valueHelp>
<format>yes</format>
<description>Enable remote host re-autentication during an IKE re-key. Currently broken due to a strong swan bug</description>
</valueHelp>
<valueHelp>
<format>no</format>
<description>Disable remote host re-authenticaton during an IKE re-key.</description>
</valueHelp>
<valueHelp>
<format>inherit</format>
<description>Inherit the reauth configuration form your IKE-group</description>
</valueHelp>
<constraint>
<regex>(yes|no|inherit)</regex>
</constraint>
</properties>
</leafNode>
#include <include/ipsec/local-address.xml.i>
#include <include/ipsec/remote-address.xml.i>
+ #include <include/ipsec/replay-window.xml.i>
<tagNode name="tunnel">
<properties>
<help>Peer tunnel</help>
<valueHelp>
<format>u32</format>
<description>Peer tunnel</description>
</valueHelp>
</properties>
<children>
#include <include/generic-disable-node.xml.i>
#include <include/ipsec/esp-group.xml.i>
#include <include/ipsec/local-traffic-selector.xml.i>
#include <include/ip-protocol.xml.i>
<leafNode name="priority">
<properties>
<help>Priority for IPsec policy (lowest value more preferable)</help>
<valueHelp>
<format>u32:1-100</format>
<description>Priority for IPsec policy (lowest value more preferable)</description>
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-100"/>
</constraint>
</properties>
</leafNode>
<node name="remote">
<properties>
<help>Match remote addresses</help>
</properties>
<children>
#include <include/port-number.xml.i>
<leafNode name="prefix">
<properties>
<help>Remote IPv4 or IPv6 prefix</help>
<valueHelp>
<format>ipv4net</format>
<description>Remote IPv4 prefix</description>
</valueHelp>
<valueHelp>
<format>ipv6net</format>
<description>Remote IPv6 prefix</description>
</valueHelp>
<constraint>
<validator name="ipv4-prefix"/>
<validator name="ipv6-prefix"/>
</constraint>
<multi/>
</properties>
</leafNode>
</children>
</node>
</children>
</tagNode>
<leafNode name="virtual-address">
<properties>
<help>Initiator request virtual-address from peer</help>
<valueHelp>
<format>ipv4</format>
<description>Request IPv4 address from peer</description>
</valueHelp>
<valueHelp>
<format>ipv6</format>
<description>Request IPv6 address from peer</description>
</valueHelp>
<multi/>
</properties>
</leafNode>
<node name="vti">
<properties>
<help>Virtual tunnel interface</help>
</properties>
<children>
<leafNode name="bind">
<properties>
<help>VTI tunnel interface associated with this configuration</help>
<completionHelp>
<path>interfaces vti</path>
</completionHelp>
</properties>
</leafNode>
#include <include/ipsec/esp-group.xml.i>
</children>
</node>
</children>
</tagNode>
</children>
</node>
</children>
</node>
</children>
</node>
</interfaceDefinition>
diff --git a/smoketest/scripts/cli/test_vpn_ipsec.py b/smoketest/scripts/cli/test_vpn_ipsec.py
index f5369ee7a..09e10a2c4 100755
--- a/smoketest/scripts/cli/test_vpn_ipsec.py
+++ b/smoketest/scripts/cli/test_vpn_ipsec.py
@@ -1,899 +1,902 @@
#!/usr/bin/env python3
#
-# Copyright (C) 2021-2023 VyOS maintainers and contributors
+# Copyright (C) 2021-2024 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import os
import unittest
from base_vyostest_shim import VyOSUnitTestSHIM
from vyos.configsession import ConfigSessionError
from vyos.utils.process import call
from vyos.utils.process import process_named_running
from vyos.utils.file import read_file
ethernet_path = ['interfaces', 'ethernet']
tunnel_path = ['interfaces', 'tunnel']
vti_path = ['interfaces', 'vti']
nhrp_path = ['protocols', 'nhrp']
base_path = ['vpn', 'ipsec']
charon_file = '/etc/strongswan.d/charon.conf'
dhcp_waiting_file = '/tmp/ipsec_dhcp_waiting'
swanctl_file = '/etc/swanctl/swanctl.conf'
peer_ip = '203.0.113.45'
connection_name = 'main-branch'
local_id = 'left'
remote_id = 'right'
interface = 'eth1'
vif = '100'
esp_group = 'MyESPGroup'
ike_group = 'MyIKEGroup'
secret = 'MYSECRETKEY'
PROCESS_NAME = 'charon-systemd'
regex_uuid4 = '[0-9a-fA-F]{8}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{12}'
ca_name = 'MyVyOS-CA'
ca_pem = """
MIICMDCCAdegAwIBAgIUBCzIjYvD7SPbx5oU18IYg7NVxQ0wCgYIKoZIzj0EAwIw
ZzELMAkGA1UEBhMCR0IxEzARBgNVBAgMClNvbWUtU3RhdGUxEjAQBgNVBAcMCVNv
bWUtQ2l0eTENMAsGA1UECgwEVnlPUzEgMB4GA1UEAwwXSVBTZWMgU21va2V0ZXN0
IFJvb3QgQ0EwHhcNMjMwOTI0MTIwMzQxWhcNMzMwOTIxMTIwMzQxWjBnMQswCQYD
VQQGEwJHQjETMBEGA1UECAwKU29tZS1TdGF0ZTESMBAGA1UEBwwJU29tZS1DaXR5
MQ0wCwYDVQQKDARWeU9TMSAwHgYDVQQDDBdJUFNlYyBTbW9rZXRlc3QgUm9vdCBD
QTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABEh8/yU572B3zmFxrGgHk+H7grYt
EHUJodY3gXNWMHz0gySrbGhsGtECDfP/G+T4Suk7cuVzB1wnLocSafD8TcqjYTBf
MA8GA1UdEwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgGGMB0GA1UdJQQWMBQGCCsG
AQUFBwMCBggrBgEFBQcDATAdBgNVHQ4EFgQUTYoQJNlk7X87/gRegHnCnPef39Aw
CgYIKoZIzj0EAwIDRwAwRAIgX1spXjrUc10r3g/Zm4O31LU5O08J2vVqFo94zHE5
0VgCIG4JK9Zg5O/yn4mYksZux7efiHRUzL2y2TXQ9IqrqM8W
"""
int_ca_name = 'MyVyOS-IntCA'
int_ca_pem = """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"""
peer_name = 'peer1'
peer_cert = """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"""
peer_key = """
MIGHAgEAMBMGByqGSM49AgEGCCqGSM49AwEHBG0wawIBAQQgVDEZDK7q/T+tiJUV
WLKS3ZYDfZ4lZv0C1gJpYq0gWP2hRANCAARkm25MO7zi7L74YzBE0uXXQkBdnFdB
IOX4J1NbCNtBlRFx1j6JrsGhqhhf/RUo96XdJ7rishRBAtChj/0wlv1Q
"""
swanctl_dir = '/etc/swanctl'
CERT_PATH = f'{swanctl_dir}/x509/'
CA_PATH = f'{swanctl_dir}/x509ca/'
class TestVPNIPsec(VyOSUnitTestSHIM.TestCase):
skip_process_check = False
@classmethod
def setUpClass(cls):
super(TestVPNIPsec, cls).setUpClass()
# ensure we can also run this test on a live system - so lets clean
# out the current configuration :)
cls.cli_delete(cls, base_path)
cls.cli_delete(cls, ['pki'])
cls.cli_set(cls, base_path + ['interface', f'{interface}.{vif}'])
@classmethod
def tearDownClass(cls):
super(TestVPNIPsec, cls).tearDownClass()
cls.cli_delete(cls, base_path + ['interface', f'{interface}.{vif}'])
def setUp(self):
# Set IKE/ESP Groups
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'encryption', 'aes128'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'hash', 'sha1'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'dh-group', '2'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'encryption', 'aes128'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'hash', 'sha1'])
def tearDown(self):
# Check for running process
if not self.skip_process_check:
self.assertTrue(process_named_running(PROCESS_NAME))
else:
self.skip_process_check = False # Reset
self.cli_delete(base_path)
self.cli_delete(tunnel_path)
self.cli_commit()
# Check for no longer running process
self.assertFalse(process_named_running(PROCESS_NAME))
def setupPKI(self):
self.cli_set(['pki', 'ca', ca_name, 'certificate', ca_pem.replace('\n','')])
self.cli_set(['pki', 'ca', int_ca_name, 'certificate', int_ca_pem.replace('\n','')])
self.cli_set(['pki', 'certificate', peer_name, 'certificate', peer_cert.replace('\n','')])
self.cli_set(['pki', 'certificate', peer_name, 'private', 'key', peer_key.replace('\n','')])
def tearDownPKI(self):
self.cli_delete(['pki'])
- def test_01_dhcp_fail_handling(self):
+ def test_dhcp_fail_handling(self):
# Skip process check - connection is not created for this test
self.skip_process_check = True
# Interface for dhcp-interface
self.cli_set(ethernet_path + [interface, 'vif', vif, 'address', 'dhcp']) # Use VLAN to avoid getting IP from qemu dhcp server
# vpn ipsec auth psk <tag> id <x.x.x.x>
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', remote_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', peer_ip])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'secret', secret])
# Site to site
peer_base_path = base_path + ['site-to-site', 'peer', connection_name]
self.cli_set(peer_base_path + ['authentication', 'mode', 'pre-shared-secret'])
self.cli_set(peer_base_path + ['ike-group', ike_group])
self.cli_set(peer_base_path + ['default-esp-group', esp_group])
self.cli_set(peer_base_path + ['dhcp-interface', f'{interface}.{vif}'])
self.cli_set(peer_base_path + ['tunnel', '1', 'protocol', 'gre'])
self.cli_commit()
self.assertTrue(os.path.exists(dhcp_waiting_file))
dhcp_waiting = read_file(dhcp_waiting_file)
self.assertIn(f'{interface}.{vif}', dhcp_waiting) # Ensure dhcp-failed interface was added for dhclient hook
self.cli_delete(ethernet_path + [interface, 'vif', vif, 'address'])
- def test_02_site_to_site(self):
+ def test_site_to_site(self):
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
local_address = '192.0.2.10'
priority = '20'
life_bytes = '100000'
life_packets = '2000000'
# vpn ipsec auth psk <tag> id <x.x.x.x>
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', remote_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_address])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', peer_ip])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'secret', secret])
# Site to site
peer_base_path = base_path + ['site-to-site', 'peer', connection_name]
self.cli_set(base_path + ['esp-group', esp_group, 'life-bytes', life_bytes])
self.cli_set(base_path + ['esp-group', esp_group, 'life-packets', life_packets])
self.cli_set(peer_base_path + ['authentication', 'mode', 'pre-shared-secret'])
self.cli_set(peer_base_path + ['ike-group', ike_group])
self.cli_set(peer_base_path + ['default-esp-group', esp_group])
self.cli_set(peer_base_path + ['local-address', local_address])
self.cli_set(peer_base_path + ['remote-address', peer_ip])
self.cli_set(peer_base_path + ['tunnel', '1', 'protocol', 'tcp'])
self.cli_set(peer_base_path + ['tunnel', '1', 'local', 'prefix', '172.16.10.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'local', 'prefix', '172.16.11.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'local', 'port', '443'])
self.cli_set(peer_base_path + ['tunnel', '1', 'remote', 'prefix', '172.17.10.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'remote', 'prefix', '172.17.11.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'remote', 'port', '443'])
self.cli_set(peer_base_path + ['tunnel', '2', 'local', 'prefix', '10.1.0.0/16'])
self.cli_set(peer_base_path + ['tunnel', '2', 'remote', 'prefix', '10.2.0.0/16'])
self.cli_set(peer_base_path + ['tunnel', '2', 'priority', priority])
self.cli_commit()
# Verify strongSwan configuration
swanctl_conf = read_file(swanctl_file)
swanctl_conf_lines = [
f'version = 2',
f'auth = psk',
f'life_bytes = {life_bytes}',
f'life_packets = {life_packets}',
f'rekey_time = 28800s', # default value
f'proposals = aes128-sha1-modp1024',
f'esp_proposals = aes128-sha1-modp1024',
f'life_time = 3600s', # default value
f'local_addrs = {local_address} # dhcp:no',
f'remote_addrs = {peer_ip}',
f'mode = tunnel',
f'{connection_name}-tunnel-1',
f'local_ts = 172.16.10.0/24[tcp/443],172.16.11.0/24[tcp/443]',
f'remote_ts = 172.17.10.0/24[tcp/443],172.17.11.0/24[tcp/443]',
f'mode = tunnel',
f'{connection_name}-tunnel-2',
f'local_ts = 10.1.0.0/16',
f'remote_ts = 10.2.0.0/16',
f'priority = {priority}',
f'mode = tunnel',
+ f'replay_window = 32',
]
for line in swanctl_conf_lines:
self.assertIn(line, swanctl_conf)
swanctl_secrets_lines = [
f'id-{regex_uuid4} = "{local_id}"',
f'id-{regex_uuid4} = "{remote_id}"',
f'id-{regex_uuid4} = "{local_address}"',
f'id-{regex_uuid4} = "{peer_ip}"',
f'secret = "{secret}"'
]
for line in swanctl_secrets_lines:
self.assertRegex(swanctl_conf, fr'{line}')
- def test_03_site_to_site_vti(self):
+ def test_site_to_site_vti(self):
local_address = '192.0.2.10'
vti = 'vti10'
# IKE
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
self.cli_set(base_path + ['ike-group', ike_group, 'disable-mobike'])
# ESP
self.cli_set(base_path + ['esp-group', esp_group, 'compression'])
# VTI interface
self.cli_set(vti_path + [vti, 'address', '10.1.1.1/24'])
# vpn ipsec auth psk <tag> id <x.x.x.x>
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', remote_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', peer_ip])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'secret', secret])
# Site to site
peer_base_path = base_path + ['site-to-site', 'peer', connection_name]
self.cli_set(peer_base_path + ['authentication', 'mode', 'pre-shared-secret'])
self.cli_set(peer_base_path + ['connection-type', 'none'])
self.cli_set(peer_base_path + ['force-udp-encapsulation'])
self.cli_set(peer_base_path + ['ike-group', ike_group])
self.cli_set(peer_base_path + ['default-esp-group', esp_group])
self.cli_set(peer_base_path + ['local-address', local_address])
self.cli_set(peer_base_path + ['remote-address', peer_ip])
self.cli_set(peer_base_path + ['tunnel', '1', 'local', 'prefix', '172.16.10.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'local', 'prefix', '172.16.11.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'remote', 'prefix', '172.17.10.0/24'])
self.cli_set(peer_base_path + ['tunnel', '1', 'remote', 'prefix', '172.17.11.0/24'])
self.cli_set(peer_base_path + ['vti', 'bind', vti])
self.cli_set(peer_base_path + ['vti', 'esp-group', esp_group])
self.cli_commit()
swanctl_conf = read_file(swanctl_file)
if_id = vti.lstrip('vti')
# The key defaults to 0 and will match any policies which similarly do
# not have a lookup key configuration - thus we shift the key by one
# to also support a vti0 interface
if_id = str(int(if_id) +1)
swanctl_conf_lines = [
f'version = 2',
f'auth = psk',
f'proposals = aes128-sha1-modp1024',
f'esp_proposals = aes128-sha1-modp1024',
f'local_addrs = {local_address} # dhcp:no',
f'mobike = no',
f'remote_addrs = {peer_ip}',
f'mode = tunnel',
f'local_ts = 172.16.10.0/24,172.16.11.0/24',
f'remote_ts = 172.17.10.0/24,172.17.11.0/24',
f'ipcomp = yes',
f'start_action = none',
+ f'replay_window = 32',
f'if_id_in = {if_id}', # will be 11 for vti10 - shifted by one
f'if_id_out = {if_id}',
f'updown = "/etc/ipsec.d/vti-up-down {vti}"'
]
for line in swanctl_conf_lines:
self.assertIn(line, swanctl_conf)
swanctl_secrets_lines = [
f'id-{regex_uuid4} = "{local_id}"',
f'id-{regex_uuid4} = "{remote_id}"',
f'secret = "{secret}"'
]
for line in swanctl_secrets_lines:
self.assertRegex(swanctl_conf, fr'{line}')
- def test_04_dmvpn(self):
+ def test_dmvpn(self):
tunnel_if = 'tun100'
nhrp_secret = 'secret'
ike_lifetime = '3600'
esp_lifetime = '1800'
# Tunnel
self.cli_set(tunnel_path + [tunnel_if, 'address', '172.16.253.134/29'])
self.cli_set(tunnel_path + [tunnel_if, 'encapsulation', 'gre'])
self.cli_set(tunnel_path + [tunnel_if, 'source-address', '192.0.2.1'])
self.cli_set(tunnel_path + [tunnel_if, 'enable-multicast'])
self.cli_set(tunnel_path + [tunnel_if, 'parameters', 'ip', 'key', '1'])
# NHRP
self.cli_set(nhrp_path + ['tunnel', tunnel_if, 'cisco-authentication', nhrp_secret])
self.cli_set(nhrp_path + ['tunnel', tunnel_if, 'holding-time', '300'])
self.cli_set(nhrp_path + ['tunnel', tunnel_if, 'multicast', 'dynamic'])
self.cli_set(nhrp_path + ['tunnel', tunnel_if, 'redirect'])
self.cli_set(nhrp_path + ['tunnel', tunnel_if, 'shortcut'])
# IKE/ESP Groups
self.cli_set(base_path + ['esp-group', esp_group, 'lifetime', esp_lifetime])
self.cli_set(base_path + ['esp-group', esp_group, 'mode', 'transport'])
self.cli_set(base_path + ['esp-group', esp_group, 'pfs', 'dh-group2'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'hash', 'sha1'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'encryption', '3des'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'hash', 'md5'])
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev1'])
self.cli_set(base_path + ['ike-group', ike_group, 'lifetime', ike_lifetime])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'dh-group', '2'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'hash', 'sha1'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'prf', 'prfsha1'])
# Profile
self.cli_set(base_path + ['profile', 'NHRPVPN', 'authentication', 'mode', 'pre-shared-secret'])
self.cli_set(base_path + ['profile', 'NHRPVPN', 'authentication', 'pre-shared-secret', nhrp_secret])
self.cli_set(base_path + ['profile', 'NHRPVPN', 'bind', 'tunnel', tunnel_if])
self.cli_set(base_path + ['profile', 'NHRPVPN', 'esp-group', esp_group])
self.cli_set(base_path + ['profile', 'NHRPVPN', 'ike-group', ike_group])
self.cli_commit()
swanctl_conf = read_file(swanctl_file)
swanctl_lines = [
f'proposals = aes128-sha1-modp1024,aes256-sha1-prfsha1-modp1024',
f'version = 1',
f'rekey_time = {ike_lifetime}s',
f'rekey_time = {esp_lifetime}s',
f'esp_proposals = aes128-sha1-modp1024,aes256-sha1-modp1024,3des-md5-modp1024',
f'local_ts = dynamic[gre]',
f'remote_ts = dynamic[gre]',
f'mode = transport',
f'secret = {nhrp_secret}'
]
for line in swanctl_lines:
self.assertIn(line, swanctl_conf)
# There is only one NHRP test so no need to delete this globally in tearDown()
self.cli_delete(nhrp_path)
- def test_05_x509_site2site(self):
+ def test_site_to_site_x509(self):
# Enable PKI
self.setupPKI()
vti = 'vti20'
self.cli_set(vti_path + [vti, 'address', '192.168.0.1/31'])
peer_ip = '172.18.254.202'
connection_name = 'office'
local_address = '172.18.254.201'
peer_base_path = base_path + ['site-to-site', 'peer', connection_name]
self.cli_set(peer_base_path + ['authentication', 'local-id', peer_name])
self.cli_set(peer_base_path + ['authentication', 'mode', 'x509'])
self.cli_set(peer_base_path + ['authentication', 'remote-id', 'peer2'])
self.cli_set(peer_base_path + ['authentication', 'x509', 'ca-certificate', int_ca_name])
self.cli_set(peer_base_path + ['authentication', 'x509', 'certificate', peer_name])
self.cli_set(peer_base_path + ['connection-type', 'initiate'])
self.cli_set(peer_base_path + ['ike-group', ike_group])
self.cli_set(peer_base_path + ['ikev2-reauth', 'inherit'])
self.cli_set(peer_base_path + ['local-address', local_address])
self.cli_set(peer_base_path + ['remote-address', peer_ip])
self.cli_set(peer_base_path + ['vti', 'bind', vti])
self.cli_set(peer_base_path + ['vti', 'esp-group', esp_group])
self.cli_commit()
swanctl_conf = read_file(swanctl_file)
tmp = peer_ip.replace('.', '-')
if_id = vti.lstrip('vti')
# The key defaults to 0 and will match any policies which similarly do
# not have a lookup key configuration - thus we shift the key by one
# to also support a vti0 interface
if_id = str(int(if_id) +1)
swanctl_lines = [
f'{connection_name}',
f'version = 0', # key-exchange not set - defaulting to 0 for ikev1 and ikev2
f'send_cert = always',
f'mobike = yes',
f'keyingtries = 0',
f'id = "{peer_name}"',
f'auth = pubkey',
f'certs = {peer_name}.pem',
f'proposals = aes128-sha1-modp1024',
f'esp_proposals = aes128-sha1-modp1024',
f'local_addrs = {local_address} # dhcp:no',
f'remote_addrs = {peer_ip}',
f'local_ts = 0.0.0.0/0,::/0',
f'remote_ts = 0.0.0.0/0,::/0',
f'updown = "/etc/ipsec.d/vti-up-down {vti}"',
f'if_id_in = {if_id}', # will be 11 for vti10
f'if_id_out = {if_id}',
f'ipcomp = no',
f'mode = tunnel',
f'start_action = start',
]
for line in swanctl_lines:
self.assertIn(line, swanctl_conf)
swanctl_secrets_lines = [
f'{connection_name}',
f'file = {peer_name}.pem',
]
for line in swanctl_secrets_lines:
self.assertIn(line, swanctl_conf)
# Check Root CA, Intermediate CA and Peer cert/key pair is present
self.assertTrue(os.path.exists(os.path.join(CA_PATH, f'{int_ca_name}_1.pem')))
self.assertTrue(os.path.exists(os.path.join(CA_PATH, f'{int_ca_name}_2.pem')))
self.assertTrue(os.path.exists(os.path.join(CERT_PATH, f'{peer_name}.pem')))
# There is only one VTI test so no need to delete this globally in tearDown()
self.cli_delete(vti_path)
# Disable PKI
self.tearDownPKI()
- def test_06_flex_vpn_vips(self):
+ def test_flex_vpn_vips(self):
local_address = '192.0.2.5'
local_id = 'vyos-r1'
remote_id = 'vyos-r2'
peer_base_path = base_path + ['site-to-site', 'peer', connection_name]
self.cli_set(tunnel_path + ['tun1', 'encapsulation', 'gre'])
self.cli_set(tunnel_path + ['tun1', 'source-address', local_address])
self.cli_set(base_path + ['interface', interface])
self.cli_set(base_path + ['options', 'flexvpn'])
self.cli_set(base_path + ['options', 'interface', 'tun1'])
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
# vpn ipsec auth psk <tag> id <x.x.x.x>
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', remote_id])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', local_address])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'id', peer_ip])
self.cli_set(base_path + ['authentication', 'psk', connection_name, 'secret', secret])
self.cli_set(peer_base_path + ['authentication', 'local-id', local_id])
self.cli_set(peer_base_path + ['authentication', 'mode', 'pre-shared-secret'])
self.cli_set(peer_base_path + ['authentication', 'remote-id', remote_id])
self.cli_set(peer_base_path + ['connection-type', 'initiate'])
self.cli_set(peer_base_path + ['ike-group', ike_group])
self.cli_set(peer_base_path + ['default-esp-group', esp_group])
self.cli_set(peer_base_path + ['local-address', local_address])
self.cli_set(peer_base_path + ['remote-address', peer_ip])
self.cli_set(peer_base_path + ['tunnel', '1', 'protocol', 'gre'])
self.cli_set(peer_base_path + ['virtual-address', '203.0.113.55'])
self.cli_set(peer_base_path + ['virtual-address', '203.0.113.56'])
self.cli_commit()
# Verify strongSwan configuration
swanctl_conf = read_file(swanctl_file)
swanctl_conf_lines = [
f'version = 2',
f'vips = 203.0.113.55, 203.0.113.56',
f'life_time = 3600s', # default value
f'local_addrs = {local_address} # dhcp:no',
f'remote_addrs = {peer_ip}',
f'{connection_name}-tunnel-1',
f'mode = tunnel',
]
for line in swanctl_conf_lines:
self.assertIn(line, swanctl_conf)
swanctl_secrets_lines = [
f'id-{regex_uuid4} = "{local_id}"',
f'id-{regex_uuid4} = "{remote_id}"',
f'id-{regex_uuid4} = "{peer_ip}"',
f'id-{regex_uuid4} = "{local_address}"',
f'secret = "{secret}"',
]
for line in swanctl_secrets_lines:
self.assertRegex(swanctl_conf, fr'{line}')
# Verify charon configuration
charon_conf = read_file(charon_file)
charon_conf_lines = [
f'# Cisco FlexVPN',
f'cisco_flexvpn = yes',
f'install_virtual_ip = yes',
f'install_virtual_ip_on = tun1',
]
for line in charon_conf_lines:
self.assertIn(line, charon_conf)
- def test_07_ikev2_road_warrior(self):
+ def test_remote_access(self):
# This is a known to be good configuration for Microsoft Windows 10 and Apple iOS 17
self.setupPKI()
ike_group = 'IKE-RW'
esp_group = 'ESP-RW'
conn_name = 'vyos-rw'
local_address = '192.0.2.1'
ip_pool_name = 'ra-rw-ipv4'
username = 'vyos'
password = 'secret'
ike_lifetime = '7200'
eap_lifetime = '3600'
local_id = 'ipsec.vyos.net'
name_servers = ['172.16.254.100', '172.16.254.101']
prefix = '172.16.250.0/28'
# IKE
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
self.cli_set(base_path + ['ike-group', ike_group, 'lifetime', ike_lifetime])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'dh-group', '2'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'hash', 'sha256'])
# ESP
self.cli_set(base_path + ['esp-group', esp_group, 'lifetime', eap_lifetime])
self.cli_set(base_path + ['esp-group', esp_group, 'pfs', 'disable'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'hash', 'sha384'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'hash', 'sha1'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'hash', 'sha256'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'local-id', local_id])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'local-users', 'username', username, 'password', password])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'server-mode', 'x509'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'certificate', peer_name])
# verify() - CA cert required for x509 auth
with self.assertRaises(ConfigSessionError):
self.cli_commit()
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'ca-certificate', ca_name])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'esp-group', esp_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'ike-group', ike_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'local-address', local_address])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'pool', ip_pool_name])
for ns in name_servers:
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'name-server', ns])
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'prefix', prefix])
self.cli_commit()
# verify applied configuration
swanctl_conf = read_file(swanctl_file)
swanctl_lines = [
f'{conn_name}',
f'remote_addrs = %any',
f'local_addrs = {local_address}',
f'proposals = aes256-sha512-modp2048,aes256-sha256-modp2048,aes256-sha256-modp1024,aes128gcm128-sha256-modp2048',
f'version = 2',
f'send_certreq = no',
f'rekey_time = {ike_lifetime}s',
f'keyingtries = 0',
f'pools = {ip_pool_name}',
f'id = "{local_id}"',
f'auth = pubkey',
f'certs = peer1.pem',
f'auth = eap-mschapv2',
f'eap_id = %any',
f'esp_proposals = aes256-sha512,aes256-sha384,aes256-sha256,aes256-sha1,aes128gcm128-sha256',
f'rekey_time = {eap_lifetime}s',
f'rand_time = 540s',
f'dpd_action = clear',
+ f'replay_window = 32',
f'inactivity = 28800',
f'local_ts = 0.0.0.0/0,::/0',
]
for line in swanctl_lines:
self.assertIn(line, swanctl_conf)
swanctl_secrets_lines = [
f'eap-{conn_name}-{username}',
f'secret = "{password}"',
f'id-{conn_name}-{username} = "{username}"',
]
for line in swanctl_secrets_lines:
self.assertIn(line, swanctl_conf)
swanctl_pool_lines = [
f'{ip_pool_name}',
f'addrs = {prefix}',
f'dns = {",".join(name_servers)}',
]
for line in swanctl_pool_lines:
self.assertIn(line, swanctl_conf)
# Check Root CA, Intermediate CA and Peer cert/key pair is present
self.assertTrue(os.path.exists(os.path.join(CA_PATH, f'{ca_name}_1.pem')))
self.assertTrue(os.path.exists(os.path.join(CERT_PATH, f'{peer_name}.pem')))
self.tearDownPKI()
- def test_08_ikev2_road_warrior_client_auth_eap_tls(self):
+ def test_remote_access_eap_tls(self):
# This is a known to be good configuration for Microsoft Windows 10 and Apple iOS 17
self.setupPKI()
ike_group = 'IKE-RW'
esp_group = 'ESP-RW'
conn_name = 'vyos-rw'
local_address = '192.0.2.1'
ip_pool_name = 'ra-rw-ipv4'
username = 'vyos'
password = 'secret'
ike_lifetime = '7200'
eap_lifetime = '3600'
local_id = 'ipsec.vyos.net'
name_servers = ['172.16.254.100', '172.16.254.101']
prefix = '172.16.250.0/28'
# IKE
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
self.cli_set(base_path + ['ike-group', ike_group, 'lifetime', ike_lifetime])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'dh-group', '2'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'hash', 'sha256'])
# ESP
self.cli_set(base_path + ['esp-group', esp_group, 'lifetime', eap_lifetime])
self.cli_set(base_path + ['esp-group', esp_group, 'pfs', 'disable'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'hash', 'sha384'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'hash', 'sha1'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'hash', 'sha256'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'local-id', local_id])
# Use EAP-TLS auth instead of default EAP-MSCHAPv2
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'client-mode', 'eap-tls'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'server-mode', 'x509'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'certificate', peer_name])
# verify() - CA cert required for x509 auth
with self.assertRaises(ConfigSessionError):
self.cli_commit()
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'ca-certificate', ca_name])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'esp-group', esp_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'ike-group', ike_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'local-address', local_address])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'pool', ip_pool_name])
for ns in name_servers:
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'name-server', ns])
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'prefix', prefix])
self.cli_commit()
# verify applied configuration
swanctl_conf = read_file(swanctl_file)
swanctl_lines = [
f'{conn_name}',
f'remote_addrs = %any',
f'local_addrs = {local_address}',
f'proposals = aes256-sha512-modp2048,aes256-sha256-modp2048,aes256-sha256-modp1024,aes128gcm128-sha256-modp2048',
f'version = 2',
f'send_certreq = no',
f'rekey_time = {ike_lifetime}s',
f'keyingtries = 0',
f'pools = {ip_pool_name}',
f'id = "{local_id}"',
f'auth = pubkey',
f'certs = peer1.pem',
f'auth = eap-tls',
f'eap_id = %any',
f'esp_proposals = aes256-sha512,aes256-sha384,aes256-sha256,aes256-sha1,aes128gcm128-sha256',
f'rekey_time = {eap_lifetime}s',
f'rand_time = 540s',
f'dpd_action = clear',
f'inactivity = 28800',
f'local_ts = 0.0.0.0/0,::/0',
]
for line in swanctl_lines:
self.assertIn(line, swanctl_conf)
swanctl_pool_lines = [
f'{ip_pool_name}',
f'addrs = {prefix}',
f'dns = {",".join(name_servers)}',
]
for line in swanctl_pool_lines:
self.assertIn(line, swanctl_conf)
# Check Root CA, Intermediate CA and Peer cert/key pair is present
self.assertTrue(os.path.exists(os.path.join(CA_PATH, f'{ca_name}_1.pem')))
self.assertTrue(os.path.exists(os.path.join(CERT_PATH, f'{peer_name}.pem')))
self.tearDownPKI()
- def test_09_ikev2_road_warrior_client_auth_x509(self):
+ def test_remote_access_x509(self):
# This is a known to be good configuration for Microsoft Windows 10 and Apple iOS 17
self.setupPKI()
ike_group = 'IKE-RW'
esp_group = 'ESP-RW'
conn_name = 'vyos-rw'
local_address = '192.0.2.1'
ip_pool_name = 'ra-rw-ipv4'
ike_lifetime = '7200'
eap_lifetime = '3600'
local_id = 'ipsec.vyos.net'
name_servers = ['172.16.254.100', '172.16.254.101']
prefix = '172.16.250.0/28'
# IKE
self.cli_set(base_path + ['ike-group', ike_group, 'key-exchange', 'ikev2'])
self.cli_set(base_path + ['ike-group', ike_group, 'lifetime', ike_lifetime])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '2', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'dh-group', '2'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'dh-group', '14'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['ike-group', ike_group, 'proposal', '10', 'hash', 'sha256'])
# ESP
self.cli_set(base_path + ['esp-group', esp_group, 'lifetime', eap_lifetime])
self.cli_set(base_path + ['esp-group', esp_group, 'pfs', 'disable'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '1', 'hash', 'sha512'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '2', 'hash', 'sha384'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '3', 'hash', 'sha256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'encryption', 'aes256'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '4', 'hash', 'sha1'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'encryption', 'aes128gcm128'])
self.cli_set(base_path + ['esp-group', esp_group, 'proposal', '10', 'hash', 'sha256'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'local-id', local_id])
# Use client-mode x509 instead of default EAP-MSCHAPv2
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'client-mode', 'x509'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'server-mode', 'x509'])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'certificate', peer_name])
# verify() - CA cert required for x509 auth
with self.assertRaises(ConfigSessionError):
self.cli_commit()
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'authentication', 'x509', 'ca-certificate', ca_name])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'esp-group', esp_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'ike-group', ike_group])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'local-address', local_address])
self.cli_set(base_path + ['remote-access', 'connection', conn_name, 'pool', ip_pool_name])
for ns in name_servers:
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'name-server', ns])
self.cli_set(base_path + ['remote-access', 'pool', ip_pool_name, 'prefix', prefix])
self.cli_commit()
# verify applied configuration
swanctl_conf = read_file(swanctl_file)
swanctl_lines = [
f'{conn_name}',
f'remote_addrs = %any',
f'local_addrs = {local_address}',
f'proposals = aes256-sha512-modp2048,aes256-sha256-modp2048,aes256-sha256-modp1024,aes128gcm128-sha256-modp2048',
f'version = 2',
f'send_certreq = no',
f'rekey_time = {ike_lifetime}s',
f'keyingtries = 0',
f'pools = {ip_pool_name}',
f'id = "{local_id}"',
f'auth = pubkey',
f'certs = peer1.pem',
f'esp_proposals = aes256-sha512,aes256-sha384,aes256-sha256,aes256-sha1,aes128gcm128-sha256',
f'rekey_time = {eap_lifetime}s',
f'rand_time = 540s',
f'dpd_action = clear',
f'inactivity = 28800',
f'local_ts = 0.0.0.0/0,::/0',
]
for line in swanctl_lines:
self.assertIn(line, swanctl_conf)
swanctl_unexpected_lines = [
f'auth = eap-',
f'eap_id'
]
for unexpected_line in swanctl_unexpected_lines:
self.assertNotIn(unexpected_line, swanctl_conf)
swanctl_pool_lines = [
f'{ip_pool_name}',
f'addrs = {prefix}',
f'dns = {",".join(name_servers)}',
]
for line in swanctl_pool_lines:
self.assertIn(line, swanctl_conf)
# Check Root CA, Intermediate CA and Peer cert/key pair is present
self.assertTrue(os.path.exists(os.path.join(CA_PATH, f'{ca_name}_1.pem')))
self.assertTrue(os.path.exists(os.path.join(CERT_PATH, f'{peer_name}.pem')))
self.tearDownPKI()
if __name__ == '__main__':
unittest.main(verbosity=2)

File Metadata

Mime Type
text/x-diff
Expires
Fri, Nov 6, 9:42 AM (8 h, 26 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
4637710
Default Alt Text
(112 KB)

Event Timeline