PR: https://github.com/vyos/vyos-1x/pull/1353

Same as Viacheslav. No issues on my tests in Ubuntu.

Yes. New 1.4 has more restricted checks on addresses and networks.
Actually, if you are using /22, the correct network for this case is 192.168.44.0/22.
You can use this online tool for checking ipv4 networks and subnets.

Added more options. PR https://github.com/vyos/vyos-1x/pull/1350

PR: https://github.com/vyos/vyos-1x/pull/1348

PR: https://github.com/vyos/vyos-1x/pull/1342

PR: https://github.com/vyos/vyos-1x/pull/1339

Yes, you error with "root" user is a known issue: T4281.

For a better analysis, can you share your firewall and nat config without hidden data? You can send it to my email: n.fort@vyos.io

I agree that having a smoketest for WLB will be great. But, there are certain limitations/considerations:

PR for docs: https://github.com/vyos/vyos-documentation/pull/771

PR: https://github.com/vyos/vyos-1x/pull/1279

I was able to reproduce issue on latest VyOS 1.4-rolling-202205060217
Steps to reproduce:
1 - Fresh/clean vyos router
2 - Add interface configuration (dhcp on WANs and static IP addresses on LAN side), commit and save
3 - Add next WLB configuration:

PR: https://github.com/vyos/vyos-1x/pull/1289

Review code: https://github.com/vyos/vyos-1x/blob/current/data/templates/firewall/nftables-nat.tmpl#L141-L142

Did similar tests with your big config >20k lines:

I have normal access!

With shared config, I'm not getting high times while loading config (at least not that high as exposed in this task)

Thanks for sharing.
It this ok?

Can you share your config @daniel.arconada ?

Applying patch from the PR I could not reproduce issue anymore

Great.
In that case I suggest marking this invalid and close it

Bug confirmed on 1.3.1-S1 and on 1.4-rolling-202203180317

Issue found.
On freh 1.3.1-S1 intallation:

Hi @freelancer . PR mentioned by @Viacheslav was merged on February 17, so fix should be included in 1.3.1

@m.korobeinikov
Does your configuration include this scripts corrections? https://docs.vyos.io/en/equuleus/automation/command-scripting.html#executing-configuration-scripts

Ok, thanks for the clarification.
I'm closing this task and marking it as resolved.

@hakwerk . Is this solved in PR https://github.com/vyos/vyos-vm-images/pull/24 ??

Splitting ipv4 files, and just adding what needed. In my case, I extracted content from geoip-ipv4.nft and create and include file geoip-CA-ipv4.nft (Canada IPs)

After some custom build and POC, here's what I got:

• Filtering works, as shown in this table:

Can you share configuration that you are deleting? So far, I can't reproduce error

Update download URL -> PR: https://github.com/vyos/vyos-vm-images/pull/26

PR for 1.4: https://github.com/vyos/vyos-1x/pull/1247

A simplified validator that rejects non-ipv6 address range (still lacks of 1st ipv6 minor than 2nd address validator):

For 1.4, problem is in ipv6-range validator, which accepts lots of values that should be considered as invalid:

PR; https://github.com/vyos/vyos-1x/pull/1240

This situation is worst, since ipset exposed the error, but vyos cli accepts it, and remains in the running configuration:

Tested on VyOS 1.4-rolling-202202150317:

I think this task can be marked as resolved, but before doing that, anything else @artooro ? Were you able to test it?

@pvanberlo Can you share more info on how we can reproduce this issue?

I wasn't able to reproduce the issue.
I installed 3 times VyOS 1.3.0 version on Proxmox:

PR: https://github.com/vyos/vyatta-cfg-qos/pull/12

Explanation on how to reproduce this error:

• On fresh install on 1.2.8 (more parameter may be needed to be able to upgrade router):

set interfaces input ifb042
set interfaces ethernet eth0 vif 42 address 203.0.113.47/32
set interfaces ethernet eth0 vif 42 redirect 'ifb042'

Then add and install 1.3.0 vyos image, and reboot.

Same problem when downgrading from 1.3.0 to 1.2.8

Can confirm the problem.
Also, when bootting on 1.3.0 version, and trying to load pre-migration config file, it's also not possible.
Removing "redirect" entry from pre-migration file, configurations loads correctly.
Once configuration was loaded, "redirect" command con be inserted once again in cli, and it is accepted.

1. Negated ports: erros while writing command.

For example:

Comman "show conntrack ..." not available any more in latest?

Duplicate T1292 was assigned to 1.4 version, and I close it because it was solved.
This bug remains open for 1.3 Equuleus

Tested on VyOS 1.4-rolling-202202150317 and working as expected.