I can reproduce it with your supplied config on a fresh router - only on boot time. Will check it out. Thanks for the config.
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed Search
Aug 4 2020
Aug 4 2020
c-po moved T1194: cronjob is being setup even if not saved from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1486: Unknown LLDP version reported to peers from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1414: equuleus: buster: 10-unmountfs.chroot fail under apply from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T770: Bonded interfaces get updated with incorrect hw-id in config. from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1076: SSH: make configuration (sshd_config) volatile and store it to /run from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1826: Misleading message on "reboot at" command from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1754: DHCPv6 client is impossible to restart from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1511: Rewrite ethernet setup scripts to python from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1600: Convert 'ping' operation from vyatta-op to new syntax from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2724: Support for IPv6 Toolset from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1973: Allow route-map to match on BGP local preference value from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2067: pppoe-server: Add possibility set multiple service-name from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1983: Expose route-map when BGP routes are programmed in to FIB from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1956: PPPoE server: support PADO-delay from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2576: "show interfaces" does not return VTI from In Progress to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2241: Changing settings on an interface causes it to fall out of bridge from Backlog to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1953: DDNS service name validation rejects valid service names from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2000: strongSwan does not install routes to table 220 in certain cases from Backport Candidates to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2678: High RAM usage on SSH logins with lots of IPv6 routes in the routing table. from In Progress to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1194: cronjob is being setup even if not saved from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.6) board.
c-po added a project to T1194: cronjob is being setup even if not saved: VyOS 1.2 Crux (VyOS 1.2.6).
Let me spawn a fresh router and try again. The meatime, then you boot into thcomfiguration Error, please kog in, enter configure mode and type: load followed by commit and show the results. Thanks
Aug 3 2020
Aug 3 2020
Fixed in latest rollings
c-po closed T2241: Changing settings on an interface causes it to fall out of bridge, a subtask of T2171: Unify creation and manipulation of interfaces, as Resolved.
Fixed in latest rolling.
c-po closed T1414: equuleus: buster: 10-unmountfs.chroot fail under apply, a subtask of T476: Update the base system to Debian 10 (Buster), as Resolved.
Works like a charm when commit is reverted.
c-po renamed T1076: SSH: make configuration (sshd_config) volatile and store it to /run from Configuration files are kept in the system when VyOS config is commited but not saved to SSH: make configuration (sshd_config) volatile and store it to /run.
Most of the services have been migrated to systemd and the configuration files have been moved to /run so they won't survive a reboot.
Wireless interface is entirely rewritte in rolling - please retest and open appropriate new bug reports when situation persists.
I guess this can be considered complete @runar ?
c-po closed T1826: Misleading message on "reboot at" command, a subtask of T1855: Clean up the reboot/poweroff CLI and script, as Resolved.
Fixed in latest versions
Fixed in latest versions.
c-po closed T1600: Convert 'ping' operation from vyatta-op to new syntax, a subtask of T689: Converting simple op-mode commands from vyatta-op to new syntax, as Resolved.
@hagbard this is a great idea - I did not thought about it.
Works as expected
c-po moved T1241: Remove of policy route throws CLI error from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1817: BGP next-hop-self not working. from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2092: dhcp-server rfc3442 static route should add default route from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2106: Wrong interface states after reboot from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2608: delete pseudo-ethernet failed (another error type) from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2595: Update Linux Kernel to v4.19.128 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2614: Add an option to mangle dict keys to vyos.config.get_config_dict() from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1868: Add opportunity to get current values from API from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2618: Conversion from 1.2 to 1.3 lost RADVD prefix autonomous-flag setting from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2622: Pseudo-ethernet interface config disappears across versions from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2624: Serial Console: fix migration script for configured powersave and no console from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2626: Changing pseudo-ethernet mode, throws CLI error from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2632: WireGuard: Cannot use only one preshared-key for one peer from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2159: webproxy log read from wrong file from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2693: Dhcp6c cannot be restarted after PPPoE link is reset from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1739: Serial interface seems not to be deleted properly from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2101: Fix VXLAN config option parsing from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2329: Show remote config openvpn from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2299: login radius-server priority from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2225: PIM/IGMP documentation from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2188: NTP op-mode commands don't work from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2591: show command has wrong interfaces ordering from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2527: bonding: the last slave interface is not deleted from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2354: Wireless conf_mode errors from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2600: RADIUS system login configuration rendered wrongly from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2594: Missing firmware for iwlwifi from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2596: Allow specifying source IP for 'add system image' from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T832: `show monitoring protocols bgp` doesn't work with frr from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1117: 'show ipv6 bgp route-map' missing from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T2021: OSPFv3 doesn't support decimal area syntax from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1901: Semicolon in values is interpreted as a part of the shell command by validators from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1986: Python configuration manipulation library leaks open files from Need Triage to Finished on the VyOS 1.3 Equuleus board.