21:39:35.057600 IP6 (flowlabel 0xba774, hlim 1, next-header UDP (17) payload length: 76) fe80::20d:b9ff:fe53:7ee.546 > ff02::1:2.547: [udp sum ok] dhcp6 solicit (xid=95b13f (client-ID hwaddr/time type 1 time 643212067 000db95307ec) (IA_NA IAID:1 T1:0 T2:0) (elapsed-time 1681) (option-request DNS-server DNS-search-list) (IA_PD IAID:2 T1:0 T2:0))
- Feed Queries
- All Stories
- Search
- Feed Search
- Transactions
- Transaction Logs
Feed Search
May 19 2020
May 19 2020
Based on a bond interface
@fetzerms thanks for getting back to us - I also successfully tested it.
May 19 2020, 3:53 PM · Restricted Project
set service dhcpv6-server shared-network-name TEST subnet 2001:db8::/64 prefix-delegation start 2001:db8:1000:: prefix-length '56' set service dhcpv6-server shared-network-name TEST subnet 2001:db8::/64 prefix-delegation start 2001:db8:1000:: stop '2001:db8:2000::'
Yes it is, we auto publish it if there is a change.
May 19 2020, 6:02 AM · Restricted Project
May 18 2020
May 18 2020
@jack9603301 looking for a „service dhcpv6-server“ configuration which hands out the prefixes via ethernet so I can implement the client side.
I know that this does not cover all use cases but it is a PoC working for some users (not all of course). Next step would be adding this to ethernet based interfaces.
Documentationnupdated here https://docs.vyos.io/en/latest/interfaces/pppoe.html#ipv6
In T421#63882, @Azayaka wrote:
May 17 2020
May 17 2020
Enjoy testing
From the Git commit:
set service pppoe-server authentication local-users username test password 'test' set service pppoe-server authentication mode 'local' set service pppoe-server client-ip-pool start '192.168.0.1' set service pppoe-server client-ip-pool stop '192.168.0.10' set service pppoe-server client-ipv6-pool delegate '2001:db8:8003::/48' delegation-prefix '56' set service pppoe-server client-ipv6-pool prefix '2001:db8:8002::/48' mask '64' set service pppoe-server name-server '8.8.8.8' set service pppoe-server name-server '2001:4860:4860::8888' set service pppoe-server interface 'eth1' set service pppoe-server local-ip '10.100.100.1'
May 16 2020
May 16 2020
May 14 2020
May 14 2020
c-po renamed T2459: Migrate vyatta-show-nat-rules.pl to Python from Migrate to Migrate vyatta-show-nat-rules.pl to Python.
jack9603301 awarded T2023: Add support for 802.1ae MACsec a Like token.
May 12 2020
May 12 2020
c-po added a comment to T1876: IPSec VTI tunnels are deleted after rekey and dangling around as A/D.
I have tested the fix in https://github.com/vyos/vyatta-cfg-vpn/pull/31 successfully on VyOS 1.2.5 with the hotfix mentiones. Happy to see this in 1.2.6
I have tested the fix in https://github.com/vyos/vyatta-cfg-vpn/pull/31 successfully on VyOS 1.2.5 with the hotfix mentiones. Happy to see this in 1.2.6
c-po added a comment to T2449: 'ipv6 address autoconf' and 'address dhcpv6' don't work because interfaces have accept_ra=1 (they should have accept_ra=2 when forwarding=1).
No Problem - nice to see races for bugfixes
May 11 2020
May 11 2020
c-po added a parent task for T2338: Can't delete static IPv6 route on vrf: T2450: Rewrite "protocols vrf" tree in XML and Python.
Thank you for the good explanation in the issue!
c-po closed T2446: VRF IPv6 static routes subnet deletion, a subtask of T2450: Rewrite "protocols vrf" tree in XML and Python, as Wontfix.
c-po added a parent task for T2446: VRF IPv6 static routes subnet deletion: T2450: Rewrite "protocols vrf" tree in XML and Python.
Okay the problem here is that FRR stores the network as fe::/64 and not as fe::0/64 which was specified on the VyOS commandline. Thus the grep command used when deleting the route does not find the proper FRR entry and gives that error.
May 10 2020
May 10 2020
That could als help on debugging like adding vyos-config-debug option or as I like on my hosts, vga=773 when debugging and checking for config migration issues.