Query: Search

	Include stories about projects I am a member of.

In T1120#29573, @c-po wrote:

instead of differentiating between raid and non raid installations - why not always wait 5 seconds for the discs to settle? As this is only done once on startup this is IMHO better then a special case.

And FYI max-ipv6-routes=10 and max-ipv4-routes=10 doesn't seem to help either.

In T1131#29483, @hagbard wrote:

Hi @danhusan, did you ever try another poll value, like 3 secs or 5 or anything like that? If set to 0, the host system won't show you any updated meta data, like if you change the ip address etc.
(https://github.com/vmware/open-vm-tools/blob/master/open-vm-tools/services/plugins/guestInfo/guestInfoServer.c#L1662)
I'm therefore not entirely sure if that should be treated as a special case scenario (we could publish a kb if you run into that condition), or if it is a general issue since you 2 were the only ones experience that issue as far as I know.
I'm also not sure it only is triggered by your situation (full bgp table) or if it can happen on other occasions as well, if you came across more issues regarding that value, please let me know.

It is vmware-tools collecting all the routes from VyOS and reporting them to the hypervisor so you can see them in the ESXi GUI. Not really optimal for full tables.

Do you have a full bgp table on this box?

IIRC I worked around this by editing /etc/vmware-tools/tools.conf and adding:

And FYI, just to make sure that something wasn't triggered by hanging out in GRUB.
rootdelay=0 fails
rootdelay=2 works, so just a small pause is needed on my system at least.

@kroy you are clearly on a roll today, rootdelay=10 also did the trick.

Spot on, booting with acpi=off makes it come up properly and configurations are actually saved.
Still getting some errors but not sure if they matter or not:

Some data I wasn't able to find in any log files:

https://forum.vyos.io/t/vyos-1-2-0rc10-raid-1-fresh-install-unable-to-save-config/3059
These users might have the same issue. I noticed one of the symptoms of having the system is in this state is that the config is lost between reboots.

I am not able to reproduce it in vmware workstation.

I can let it sit forever, the status wont change as the array is missing one disk. Notice how after (auto read only) raid1 is only says sdb1[0] (sda1 is missing).
Also we can see that this wont fix itself from looking at the df -h output where the system clearly has booted straight from sda1 instead of from the raid array (/dev/md127)

After reboot, running from local disks:

During install (booted from ISO):

From 739d0815786aa642292335e47d14d99a34f0e68d Mon Sep 17 00:00:00 2001
From: Daniel Husand <daniel@fnutt.net>
Date: Fri, 9 Nov 2018 15:03:58 +0100
Subject: [PATCH] T982: soft-reconfiguration inbound now enables correctly on
 ipv4 peers

From a70d2041bde216389b903eb273d3a09270d8f9aa Mon Sep 17 00:00:00 2001
From: Daniel Husand <daniel@fnutt.net>
Date: Tue, 6 Nov 2018 15:11:05 +0100
Subject: [PATCH] Fixed some typos to get ipv4 prefix-lists working again. Bug
 T968.

My test env has been running for 50 minutes without the prefix-lists engaging so I'd say this is another issue. Furthermore I think the issue you are describing has been fixed in the upcoming rc6 (T944).

Didn't know it existed, yes you are right. Thanks!

I disagree. The option to add additional ports to be forwarded can be really useful to get other than DHCP broadcast traffic between subnets. The Cisco equivalent command would be 'ip forward-protocol udp [port]'

Search
Use Results
Edit Query
Hide Query

Dec 31 2018

Dec 28 2018

Dec 22 2018

Dec 20 2018

Dec 19 2018

Dec 18 2018

Nov 9 2018

Nov 6 2018

Nov 5 2018

Oct 26 2018

Jun 19 2018

Apr 20 2018

SearchUse ResultsEdit QueryHide Query